compensadores de goma
TRANSCRIPT
INTRODUCCIÓNJUNTAS DE EXPANSIÓN TIPO “A”
• ERV-CR• ERV-G• ERV-GS• ERV-R• ERV-ROTEX• ERV-GR• ERV-W• ERV-O
JUNTAS DE EXPANSIÓN TIPO “G”
ACCESORIOS• Protector ignífugo• Espiral para vacio• Camisa de PTFE• Tirantes de control
INSTRUCCIONES DE MONTAJE, INSTALACIÓN YALMACENAMIENTO
CONSTRUCCIONES ESPECIALES
OTROS PRODUCTOS• Acoplamientos antivibratorios para entrada y salida de bombas• Compensadores de P.T.F.E.
53
54
5455565758595960
61
62
62626262
63
64
65
Expansion JointsRubber
de gomaJuntas de expansión
INTRODUCTIONTYPE “A” EXPANSION JOINTS
• ERV-CR• ERV-G• ERV-GS• ERV-R• ERV-ROTEX• ERV-GR• ERV-W• ERV-O
TYPE “G” EXPANSION JOINTS
ACCESSORIES• Flame protection cover• Vacuum support spiral• PTFE lining• Tie rods
INSTRUCTIONS: ASSEMBLY, INSTALLATIONSTORING
SPECIAL CONSTRUCTIONS
OTHER PRODUCTS• Rubber metal pipe joints for installation on pumps• P.T.F.E. compensators
INTRODUCTION
Rubber compensators provide great flexibility, presentgreat movement capabilities and a light
weight. They are especiallysuitable for absorbing noise andvibrations in pipelines and arealso excellent devices forconnecting unaligned pipes and
reduce the effects of waterstrike.
They are manufactured fromdifferent rubber typesreinforced with synthetic and
metallic fibres. Connecting flangesare supplied in carbon steel or other material specified underrequest.
According to their nominal diameter, we will establish thefollowing classification:
Type “A”: Up to 1000 mm diameter, moulded-manufacturedand equipped with mobile floating flanges.
Type “G”: Up to 3000 mm diameter with rubber and clothflanges and metallic counterflanges.
Type “RC”: Rectangular and square shapes.
We can adapt ourselves to your service conditions (pressure,vacuum, movement and temperature).
Pressure (vacuum) and temperature (below cero) resistance
• Type “A” (up to DN-300)Maximum allowable working pressure at [(+50 ºC) 16 Bar], at [(+100 ºC) 10 Bar,], at [(+110 ºC) 8 Bar], test pressure 25 Bar, yielding pressure (50 ÷ 60 Bar), vacuum 0,03 Mpa (0,08).
• Type “A” (from DN-350 to DN-1000)Maximum allowable working pressure at [(+50 ºC) 10 Bar], at [(+100 ºC) 8 Bar,], at [(+110 ºC) 6 Bar], test pressure 15 Bar, yielding pressure(30 ÷ 40 Bar), vacuum 0,03 Mpa (0,10).
INTRODUCCIÓN
Los compensadores de dilatación de gomaproporcionan una gran flexibilidad, presentan unagran capacidad de movimiento yun peso ligero. Sonespecialmente indicados parala eliminación de ruidos yabsorción de vibraciones entuberías, siendo tambiénexcelentes dispositivos paraconectar tuberías mal alineadaso reducir golpes de ariete.
Se fabrican con cuerpos de diferentestipos de caucho reforzados con tejidos sintéticos y metálicos.Las bridas de conexión se suministran en acero carbono o enlos materiales especificados por el cliente bajo pedido.
Según su diámetro nominal, clasificaremos esta línea defabricados en los siguientes tipos:
Tipo “A”: Hasta 1000 mm de diámetro, fabricados bajo moldey montados con bridas móviles giratorias.
Tipo “G”: Hasta 3000 mm de diámetro con bridas de cauchoy lona y contrabridas metálicas incorporadas.
Tipo “RC”: Formatos rectangular / cuadrado.
En función de las condiciones de servicio podemos adaptarnosa sus necesidades (presión, vacío, movimiento y temperatura).
Resistencia a la presión (vacío) y temperatura (bajo cero)
• Tipo “A” (hasta DN-300)Máxima presión de trabajo permitida a [(+50 ºC) 16 Bar], a [(+100 ºC)10 Bar,], a [(+110 ºC) 8 Bar], presión de prueba 25 Bar, presión de rotura(50 ÷ 60 Bar), vacío 0,03 Mpa (0,08).
• Tipo “A” (desde DN-350 a DN-600)Máxima presión de trabajo permitida a [(+50 ºC) 10 Bar], a [(+100 ºC)8 Bar,], a [(+110 ºC) 6 Bar], presión de prueba 15 Bar, presión de rotura(30 ÷ 40 Bar), vacío 0,03 Mpa (0,10).
53
de Goma Rubber
Juntas de expansión Expansion joints
Ref. Color Aplicaciones Max.TemperaturaMaterial
Aire caliente, ácidos en media concentración, gases, agua, etc.Hot air, gas, water, medium concentration acids.
Vapor e instalaciones de agua caliente.Alcalisis. Steam and hot water, chemicals.
Productos derivados del petróleo, combustible, diversos gases,motores diesel, aplicaciones para altas presiones, agua derefrigeración, líneas de lubricación de aceite en barcos, etc.Petroleum based products, fuel, different gases, diesel engines,high pressure applications, cooling water, lubricating oil pipelines at ships, etc.
Acidos y alcalisis; productos químicos agresivos.Acids, aggressive chemicals, lies.
Hidrocarburos y ácidos concentrados.Hydrocarbons and concentrated acids.
Industria de alimentación y bebidas en general.Food and edible liquids.
Negro / Black
Rojo / Red
Amarillo / Yellow
Verde / Green
Morado / Purple
Blanco / White
NEOPRENOCHLOROPRENE
E.P.D.M.
NITRILONITRILE
HYPALON®
VITON®
NBR/NR
70 ºC
110 ºC
100 ºC
80 ºC
Hasta / Up to 200 ºC
80 ºC
® Registered trademark by Dupont
54
de Goma Rubber
Juntas de expansión Expansion joints
TYPE “A”
Certified by the following classification agencies:
ERV-CR
Construction:Body and external cover with chloroprene and nylon textilecord.Flanges: Swivelling, carbon steel, zinc plated and yellowchromated. (Other flange materials available on request:stainless steel, brass or hot galvanised steel).Standards: DIN PN-6; PN-10, PN-16, PN-25/40, Asa 150/300lbs. BS, etc.
Applications:Cold and warm water, washing water, sea water, waste water,weak sour or alkaline water, oil containing water, oil andgrease, compressed air.
Maximum temperature: +70 ºC
JUNTAS DE EXPANSIÓN TIPO “A”
Juntas de expansión homologadas por las siguientes entidadesclasificadoras:
ERV-CR
Construcción:Cuerpo y cubierta exterior de cloropreno CR con refuerzo decables de nylon.Bridas: Giratorias cincadas en acero carbono. (Bajo demandatambién en otros materiales: acero inoxidable, bronce, acerogalvanizado).Estándares: DIN PN-6; PN-10, PN-16, PN-25/40, Asa 150 lbs.BS, etc.
Aplicaciones:Aguas muy cloradas, agua de mar, aguas residuales, aguasácidas o básicas, aguas con anticorrosivos, aceite lubricantey grasas, aire comprimido.
Temperatura máxima: +70 ºC
25
32
40
50
65
80
100
125
150
200
250
300
350
400
500
600
700
800
900
1000
DNBridas / Flanges
Dimensiones mm / Dimensions mm
mm Pulg. / Inches
LongitudLength
mm. PN - Bar D K Ø L x Ø
Area efectivaEffective area
Q. cm2
PesoWeight
Kg
1”
11/4”
11/2”
2”
2 1/2”
3”
4”
5”
6”
8”
10”
12”
14”
16”
20”
24”
28”
32”
36”
40”
130
130
130
130
130
130
130
130
130
130
130
130
200
200
200
200
275
250
300
300
16
16
16
16
16
16
16
16
16
10
10
10
10
10
10
10
10
10
10
10
115
140
150
165
185
200
220
250
285
340
395
445
505
565
670
780
895
1015
1115
1230
85
100
110
125
145
160
180
210
240
295
350
400
460
515
620
725
840
950
1050
1160
4 x 14
4 x 18
4 x 18
4 x 18
4 x 18
8 x 18
8 x 18
8 x 18
8 x 22
8 x 22
12 x 22
12 x 22
16 x 22
16 x 26
20 x 26
20 x 30
24 x 30
24 x 33
28 x 33
28 x 36
15
15
20
30
50
85
125
185
250
400
600
800
1000
1375
2185
3080
4800
5440
7100
8700
1,5
2,5
3,0
4,0
4,5
5,5
7,0
8,5
11,0
17,0
23,5
27,0
39,5
42,0
59,5
70,0
135,0
125,0
1,5
2,5
ERV-CR
55
de Goma Rubber
Juntas de expansión Expansion joints
ERV-G
Construction:Body in nitrile (NBR) and external cover in chloroprene.Reinforced with nylon textile cord.Flanges: Swivelling, carbon steel, zinc plated and yellowchromated. (Other flange materials available on request:stainless steel, brass or hot galvanised steel).Standards: DIN PN-6; PN-10, PN-16, PN-25/40, Asa 150/300lbs. BS, etc.
Applications:Petroleum based products, fuels, cooling water emulsionswith corrosion preventing oil, compressed air.
Maximum temperature: +90 ºC
ERV-G
Construcción:Cuerpo en nitrilo y cubierta exterior de cloropreno CR conrefuerzo de cables de nylon.Bridas: Giratorias cincadas en acero carbono. (Bajo demandatambién en otros materiales: acero inoxidable, bronce, acerogalvanizado).Estándares: DIN PN-6; PN-10, PN-16, PN-25/40, Asa 150 lbs.BS, etc.
Aplicaciones:Hidrocarburos, carburantes, agua con aceites de protecciónde la corrosión, aire comprimido, con aceite, aceites, ácidosdébiles, sales, alcoholes.
Temperatura máxima: +90 ºC
ERV-G 25
32
40
50
65
80
100
125
150
200
250
300
350
400
500
600
700
800
900
1000
DNBridas / Flanges
Dimensiones mm / Dimensions mmmm Pulg. / Inches
LongitudLength
mm. PN - Bar D K Ø L x Ø
Area efectivaEffective area
Q. cm2
PesoWeight
Kg
1”
11/4”
1 1/2”
2”
21/2”
3”
4”
5”
6”
8”
10”
12”
14”
16”
20”
24”
28”
32”
36”
40”
130
130
160
130
160
130
150
160
130
150
160
130
150
160
130
150
160
130
150
160
130
150
160
130
150
160
175
130
175
200
130
200
200
200
200
200
275
250
300
300
16
16
16
16
16
16
16
16
16
10
10
10
10
10
10
10
10
10
10
10
115
140
150
165
185
200
220
250
285
340
395
445
505
565
670
780
895
1015
1115
1230
85
100
110
125
145
160
180
210
240
295
350
400
460
515
620
725
840
950
1050
1160
4 x 14
4 x 18
4 x 18
4 x 18
4 x 18
8 x 18
8 x 18
8 x 18
8 x 22
8 x 22
12 x 22
12 x 22
16 x 22
16 x 26
20 x 26
20 x 30
24 x 30
24 x 33
28 x 33
28 x 36
15
15
20
30
50
85
125
185
250
400
600
800
1000
1375
2185
3080
4800
5440
7100
8700
1,5
2,5
2,7
3,0
3,2
4,0
4,1
4,2
4,5
4,6
4,7
5,5
5,6
5,7
7,0
7,1
7,2
8,5
8,6
8,7
11,0
11,1
11,2
17,0
17,1
17,2
17,3
23,5
23,8
24,0
27,0
27,5
39,5
42,0
59,5
70,0
135,0
125,0
56
de Goma Rubber
Juntas de expansión Expansion joints
ERV-GS
Construction:Body in nitrile (NBR) and external cover in chloroprene.Reinforced with steel wire cord.Flanges: Swivelling, carbon steel, zinc plated and yellowchromated. (Other flange materials available on request:stainless steel, brass or hot galvanised steel).Standards: DIN PN-6; PN-10, PN-16, PN-25/40, Asa 150/300lbs. BS, etc.
Applications:Cooling water and lubrication oil pipe lines in ships and dieselengines, for example on sludge draining plants, waste waterprocessing and treatment plants, block heating power stations,heat recovery plants, seawater desalination plants. In ship’sengine rooms additional flame protection cover is not needed.
Maximum temperature: +100 ºC
ERV-GS
Construcción:Cuerpo de nitrilo y cubierta exterior de cloropreno CR conrefuerzo de cables de acero.Bridas: Giratorias cincadas en acero carbono. (Bajo demandatambién en otros materiales: acero inoxidable, bronce, acerogalvanizado).Estándares: DIN PN-6; PN-10, PN-16, PN-25/40, Asa 150 lbs.BS, etc.
Aplicaciones:Aguas con aceites de protección de la corrosión, aceitelubricante y grasas, agua marina.Especialmente recomendada para su utilización en la sala demaquinas de barcos sin necesidad de cubierta protectoraignífuga adicional.
Temperatura máxima: +100 ºC
ERV-GS25
32
40
50
65
80
100
125
150
200
250
300
350
400
DNBridas / Flanges
Dimensiones mm / Dimensions mm
mm Pulg. / Inches
LongitudLength
mm. PN - Bar D K Ø L x Ø
Area efectivaEffective area
Q. cm2
PesoWeight
Kg
1”
1 1/4”
11/2”
2”
2 1/2”
3”
4”
5”
6”
8”
10”
12”
14”
16”
130
130
130
130
130
130
150
130
150
130
150
130
150
130
175
130
175
130
200
200
200
16
16
16
16
16
16
16
16
16
10
10
10
10
10
115
140
150
165
185
200
220
250
285
340
395
445
505
565
85
100
110
125
145
160
180
210
240
295
350
400
460
515
4 x 14
4 x 18
4 x 18
4 x 18
4 x 18
8 x 18
8 x 18
8 x 18
8 x 22
8 x 22
12 x 22
12 x 22
16 x 22
16 x 26
10
15
20
30
50
85
125
185
250
400
600
800
1000
1375
1,5
2,5
3,0
4,0
4,5
5,5
5,6
7,0
7,1
8,5
8,6
11,0
11,1
17,0
17,3
23,5
23,8
27,0
27,5
39,5
42,0
57
de Goma Rubber
Juntas de expansión Expansion joints
ERV-R
Construction:Body and external cover with EPDM reinforced with nylontextile cord.Flanges: Swivelling, carbon steel, zinc plated and yellowchromated. (Other flange materials available on request:stainless steel, brass or hot galvanised steel).Standards: DIN PN-6; PN-10, PN-16, PN-25/40, Asa 150/300lbs. BS, etc.
Applications:Drinking water, cold and warm waste water, cooling water,chemical water (without oil containing additives), chemicals,acids and alcalis, SALT solutions, technical alcohols, estersand ketones.
Maximum temperature: +90 ºC
ERV-R
Construcción:Cuerpo y cubierta exterior de EPDM con refuerzo de cablesde nylon.Bridas: Giratorias cincadas en acero carbono. (Bajo demandatambién en otros materiales: acero inoxidable, bronce, acerogalvanizado).Estándares: DIN PN-6; PN-10, PN-16, PN-25/40, Asa 150 lbs.BS, etc.
Aplicaciones:Agua potable, agua fría y caliente hasta 90ºC, agua derefrigeración, numerosos ácidos y bases, esters, cetonas,ácidos y álcalis, soluciones salinas, alcoholes técnicos.
Temperatura máxima: +90 ºC
ERV-R 25
32
40
50
65
80
100
125
150
200
250
300
350
400
500
600
700
800
900
1000
DNBridas / Flanges
Dimensiones mm / Dimensions mmmm Pulg. / Inches
LongitudLength
mm. PN - Bar D K Ø L x Ø
Area efectivaEffective area
Q. cm2
PesoWeight
Kg
1”
11/4”
1 1/2”
2”
21/2”
3”
4”
5”
6”
8”
10”
12”
14”
16”
20”
24”
28”
32”
36”
40”
130
130
160
130
160
130
150
160
130
150
160
130
150
160
130
150
160
130
150
160
130
150
160
130
150
160
175
130
175
200
130
200
200
200
200
200
275
250
300
300
16
16
16
16
16
16
16
16
16
10
10
10
10
10
10
10
10
10
10
10
115
140
150
165
185
200
220
250
285
340
395
445
505
565
670
780
895
1015
1115
1230
85
100
110
125
145
160
180
210
240
295
350
400
460
515
620
725
840
950
1050
1160
4 x 14
4 x 18
4 x 18
4 x 18
4 x 18
8 x 18
8 x 18
8 x 18
8 x 22
8 x 22
12 x 22
12 x 22
16 x 22
16 x 26
20 x 26
20 x 30
24 x 30
24 x 33
28 x 33
28 x 36
15
15
20
30
50
85
125
185
250
400
600
800
1000
1375
2185
3080
4800
5440
7100
8700
1,5
2,5
2,7
3,0
3,2
4,0
4,1
4,2
4,5
4,6
4,7
5,5
5,6
5,7
7,0
7,1
7,2
8,5
8,6
8,7
11,0
11,1
11,2
17,0
17,1
17,2
17,3
23,5
23,8
24,0
27,0
27,5
39,5
42,0
59,5
70,0
135,0
125,0
58
de Goma Rubber
Juntas de expansión Expansion joints
ERV-ROTEX
ERV-ROTEX
Construction:Body and external cover with EPDM reinforced with polymertextile cord.Flanges: Swivelling, carbon steel, zinc plated and yellowchromated. (Other flange materials available on request:stainless steel, brass or hot galvanised steel).Standards: DIN PN-6; PN-10, PN-16, PN-25/40, Asa 150/300 lbs.BS, etc.
Applications:Hot heating water, cooling water and hot air.
Maximum temperature:+100 ºC; Temporarily:+130 ºC
ERV-ROTEX
Construcción:Cuerpo y cubierta exterior de EPDM con refuerzo textil depolímero.Bridas: Giratorias cincadas en acero carbono. (Bajo demandatambién en otros materiales: acero inoxidable, bronce, acerogalvanizado).Estándares: DIN PN-6; PN-10, PN-16, PN-25/40, Asa 150 lbs.BS, etc.
Aplicaciones:Agua sobrecalentada, vapor.
Temperatura máxima: Constante: +100 ºC; Punta:+130 ºC
25
32
40
50
65
80
100
125
150
200
250
300
350
400
500
600
700
800
900
1000
DN Bridas / FlangesDimensiones mm / Dimensions mm
mm Pulg. / Inches
LongitudLength
mm. PN - Bar D K Ø L x Ø
Area efectivaEffective area
Q. cm2
PesoWeight
Kg
1”
11/4”
1 1/2”
2”
21/2”
3”
4”
5”
6”
8”
10”
12”
14”
16”
20”
24”
28”
32”
36”
40”
130
130
160
130
160
130
150
160
130
150
160
130
150
160
130
150
160
130
150
160
130
150
160
130
150
160
175
130
175
200
130
200
200
200
200
200
275
250
300
300
16
16
16
16
16
16
16
16
16
10
10
10
10
10
10
10
10
10
10
10
115
140
150
165
185
200
220
250
285
340
395
445
505
565
670
780
895
1015
1115
1230
85
100
110
125
145
160
180
210
240
295
350
400
460
515
620
725
840
950
1050
1160
4 x 14
4 x 18
4 x 18
4 x 18
4 x 18
8 x 18
8 x 18
8 x 18
8 x 22
8 x 22
12 x 22
12 x 22
16 x 22
16 x 26
20 x 26
20 x 30
24 x 30
24 x 33
28 x 33
28 x 36
15
15
20
30
50
85
125
185
250
400
600
800
1000
1375
2185
3080
4800
5440
7100
8700
1,5
2,5
2,7
3,0
3,2
4,0
4,1
4,2
4,5
4,6
4,7
5,5
5,6
5,7
7,0
7,1
7,2
8,5
8,6
8,7
11,0
11,1
11,2
17,0
17,1
17,2
17,3
23,5
23,8
24,0
27,0
27,5
39,5
42,0
59,5
70,0
135,0
125,0
59
de Goma Rubber
Juntas de expansión Expansion joints
ERV-GR
Construction:Body and external cover with Hypalon reinforced with nylontextile cord.Flanges: Swivelling, carbon steel, zinc plated and yellowchromated. (Other flange materials available on request:stainless steel, brass or hot galvanised steel).Standards: DIN PN-6; PN-10, PN-16, PN-25/40, Asa 150/300 lbs.BS, etc.
Applications:Acids, álcalis, chemicals and aggressive chemical waste waterand acids.
Maximum temperature: +80 ºC
ERV-GR
Construcción:Cuerpo y cubierta exterior de Hypalon con refuerzo de cablesde nylon.Bridas: Giratorias cincadas en acero carbono. (Bajo demandatambién en otros materiales: acero inoxidable, bronce, acerogalvanizado).Estándares: DIN PN-6; PN-10, PN-16, PN-25/40, Asa 150 lbs.BS, etc.
Aplicaciones:Soluciones fuertemente ácidas y oxidantes.
Temperatura máxima: +80 ºC
ERV-GR
ERV-W
Construction:Body in white nitrile (NBR) and external cover in chloroprene.Reinforced with nylon textile cord.Flanges: Swivelling, carbon steel, zinc plated and yellow chromated.(Other flange materials available on request: stainless steel, brassor hot galvanised steel).Standards: DIN PN-6; PN-10, PN-16, PN-25/40, Asa 150 lbs. BS,etc.
Applications:Edible liquids.
Maximum temperature: +80 ºC
ERV-W
Construcción:Cuerpo de nitrilo acrílico blanco y cubierta exterior decloropreno con refuerzo de cables de nylon.Bridas: Giratorias cincadas en acero carbono. (Bajo demandatambién en otros materiales: acero inoxidable, bronce, acerogalvanizado).Estándares: DIN PN-6; PN-10, PN-16, PN-25/40, Asa 150 lbs.BS, etc.
Aplicaciones:Líquidos alimentarios.
Temperatura máxima: +80 ºC
ERV-W
25
32
40
50
65
80
100
125
150
200
250
300
350
400
500
600
DNBridas / Flanges
Dimensiones mm / Dimensions mm
mm Pulg. / Inches
LongitudLength
mm. PN - Bar D K Ø L x Ø
Area efectivaEffective area
Q. cm2
PesoWeight
Kg
1”
1 1/4”
11/2”
2”
2 1/2”
3”
4”
5”
6”
8”
10”
12”
14”
16”
20”
24”
130
130
130
130
130
130
130
130
130
130
130
130
200
200
200
200
16
16
16
16
16
16
16
16
16
10
10
10
10
10
10
10
115
140
150
165
185
200
220
250
285
340
395
445
505
565
670
780
85
100
110
125
145
160
180
210
240
295
350
400
460
515
620
725
4 x 14
4 x 18
4 x 18
4 x 18
4 x 18
8 x 18
8 x 18
8 x 18
8 x 22
8 x 22
12 x 22
12 x 22
16 x 22
16 x 26
20 x 26
20 x 30
15
15
20
30
50
85
125
185
250
400
600
800
1000
1375
2185
3080
1,5
2,5
3,0
4,0
4,5
5,5
7,0
8,5
11,0
17,0
23,5
27,0
39,5
42,0
59,5
70,0
60
de Goma Rubber
Juntas de expansión Expansion joints
ERV-O
Construction:Body in nitrile (NBR) and external cover in chloroprene.Reinforced with nylon textile cord.Flanges: Swivelling, carbon steel, zinc plated and yellowchromated. (Other flange materials available on request:stainless steel, brass or hot galvanised steel).Standards: DIN 2635 PN-40Sizes: DN-25 a DN-100
Applications:Liquid petroleum gas (LPG). Tank trucks and refuelling stations.
Maximum temperature: +70 ºC
Working pressure max.:20 bar
Burst pressure:> 100 bar
ERV-O
Construcción:Cuerpo de nitrilo y cubierta exterior de cloropreno con refuerzode cables de nylon.Bridas: Giratorias cincadas en acero carbono. (Bajo demandatambién en otros materiales: acero inoxidable, bronce, acerogalvanizado).Estándares: DIN 2635/PN-40Tamaños : DN-25 a DN-100
Aplicaciones:Gas petróleo líquido (LPG). Tanques de camión y gasolineras.
Temperatura máxima: +70 ºC
Presión máxima de operación:20 bar
Presión de rotura:> 100 bar
ERV-O
25
32
40
50
65
80
100
DNBridas / Flanges
Dimensiones mm / Dimensions mm
mm Pulg. / Inches
LongitudLength
mm. PN - Bar D K Ø L x Ø
Area efectivaEffective area
Q. cm2
PesoWeight
Kg
1”
1 1/4”
11/2”
2”
2 1/2”
3”
4”
130
130
130
130
130
130
130
115
140
150
165
185
200
235
85
100
110
125
145
160
190
4 x 14
4 x 18
4 x 18
4 x 18
4 x 18
8 x 18
8 x 22
15
15
20
30
50
85
125
1,6
3,0
3,3
4,8
5,7
7,5
10,4
Ver
text
oRe
fer
to te
xt
61
de Goma Rubber
Juntas de expansión Expansion joints
TYPE “G” EXPANSION JOINTSJUNTAS DE EXPANSION TIPO “G”
450
500
600
700
800
900
1000
1100
1200
1300
1400
1500
1600
1800
2000
2200
2400
2500
2600
2800
3000
mm.
DNLongitudLength
L*
Espesor bridaFlange thickness
F AceroF Steel
Pulg. /Inches mm. bar mm.
Presiónde trabajoWorkingpressure D Caucho
D Rubber
MovimientosMovements
ºmm.Compresión
(-)Compression
Axial (±) mm
Tracción(+)
Traction
Lateral (±) Angular α±
18”
20”
24”
28”
32”
36”
40”
44”
48”
52”
56”
60”
64”
72”
80”
88”
96”
100”
104”
112”
120”
250
250
250
250
300
300
300
350
350
350
350
350
350
350
350
350
350
350
350
350
350
10
10
10
10
10
10
8
8
8
8
8
8
6
6
6
6
4
4
4
3
3
12
12
12
15
15
15
15
15
15
15
15
20
20
20
20
25
25
25
25
25
25
12
12
12
12
15
15
15
15
15
15
15
15
20
20
20
20
25
25
25
25
25
40
40
40
40
40
40
35
35
35
35
35
35
35
35
35
30
30
30
30
30
30
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
30
30
30
30
30
30
30
25
25
25
25
25
25
25
25
25
25
25
25
25
25
6
6
6
6
6
6
6
5
5
4
4
4
4
3
3
2
2
2
1,5
1,5
1,5
mm.
• *La longitud puede ajustarse a los requisitos del cliente.• Bridas en acero al carbono (taladradas en DIN PN-6/PN- 10/PN-16…, ASA
125 LB/ ASA 150 LB / ASA 300 LB…etc)• Fuelle en neopreno (reforzado con fibras y cordón de nylon y aros de acero).• Se pueden homologar según necesidad del cliente• Cálculo y desarrollo según FSA.
• Length to be adjusted to customer requirements.• Flanges in carbon steel (according to DIN PN-6/PN-10/PN-16…., ASA 125 LB/
ASA 150 LB / ASA 300 LB… etc.).• Neoprene body (reinforced with nylon fibres and steel rings)• Certified according to customer’s requirements.• Calculation and development according to FSA.
ACCESSORIES
FLAME PROTECTION COVERThe flame protection cover is made of several layers of glassfibre fabric with a surface cover of silver-coloured hightemperature resistant silicone caoutchouc. This protects theexpansion joints reliably against radiation heat and directflames up to 800 ºC for 30 minutes.
VACUUM SUPPORT SPIRAL
Manufactured in stainless steel AISI 316 Ti, it is to be usedwhen the vacuum in the installation is higher than that statedas the expansion joint admissible vacuum value.
PTFE LINING
To be installed when the chemical resistance of the chosenexpansion joint is not sufficient.
TIE RODSUsed to limit the expansion joint’s movement. Supplied withEPDM bushers.
ACCESORIOS
PROTECTOR IGNÍFUGO
Cubiertas de protección ignífugas fabricadas con varias capasde tejido de fibra de vidrio y recubiertas con un caucho desilicona plateado resistente a las altas temperaturas. Protegena las juntas de expansión de la radiación de calor y las llamashasta una temperatura de +800ºC durante un periodo de 30minutos.
ESPIRAL PARA VACÍO
Fabricada en acero inoxidable AISI 316Ti, se debe instalarcuando el valor del vacío en la instalación es superior alindicado como vacío admisible de la junta de expansión.
CAMISA DE PTFE
Debe instalarse cuando la resistencia química de la junta deexpansión seleccionada no es suficiente.
TIRANTES DE CONTROLPara limitar el movimiento de la junta. Se suministran tambiéncon casquillos de goma en EPDM.
62
de Goma Rubber
Juntas de expansión Expansion joints
63
de Goma Rubber
Juntas de expansión Expansion joints
INSTRUCTIONS: ASSEMBLY,
INSTALLATION, STORING
Install Expansion joints to the prescribed neutral lengthsupplied by the manufacturer avoiding compression or
lengthening that impose forces on the expansion joint. Specialcare must be taken that the joint is free of debris or metalchips that could damage the compensator.
Each compensator should be located between two fixedanchoring points to absorb the reaction force and the natural
movement of the bellows. The piping line should be correctlyguided so as to avoid sudden movements.
When it is not possible to properly anchor the compensatorto the line or during hydraulic testing, flanges provided bylugs should be used to keep the joint stable. When highpressure is present, it is recommended to calculate the stressthe compensator must support in order to avoid great forcesto be imposed on the anchoring and fixing devices.
Rubber compensators must be installed in dry places, not tobe subjected to sudden temperature changes and should notbe exposed to direct sunlight. They should not be stored ina vertical pile so as to avoid compression and should be keptaway from cutting devices or welding areas. Avoid handlingwith grease, paint, etc.
INSTRUCCIONES DE MONTAJE,
INSTALACION Y ALMACENAMIENTO
Los compensadores deben instalarse en una longitud libre,según se suministran, y no deben someterse a estiramientoso compresiones que lo fuercen más delo estipulado. Debe ponerseespecial cuidado en quelas bridas no tenganrestos de rebaba (por eltaladro de los agujeros),ni aristas vivas quepuedan cortar la zonade asiento de loscompensadores.
Cada compensador se colocará entre dos puntos fijosde anclaje, para que la fijación sea suficientemente fuertepara absorber la fuerza de reacción y movimiento propiodel fuelle.
Las guías en la línea de tubería (calzos, suplementos, tubos…)
deben colocarse correctamente para evitar movimientosbruscos.
Cuando no sea posible anclar adecuadamente el compensadora la línea o durante la realización de pruebas hidráulicas, seutilizarán bridas con orejetas para contener la fuerza dereacción y mantenerlo estable. En líneas donde están presentesaltas presiones, se recomienda calcular los esfuerzos quedebe soportar el compensador para evitar la imposición degrandes fuerzas sobre los anclajes o dispositivos de fijación.
Los compensadores de goma deben almacenarse en lugaressecos, sin cambios bruscos de temperatura y evitando suexposición al sol. Tampoco deben apilarse verticalmente, paraevitar posibles compresiones, y deben mantenerse alejadosde objetos punzantes o zonas de soldadura. Evite sumanipulación con grasas, pinturas, etc.
Movimiento Angular Movimiento Lateral Movimiento axial
extensión
Movimiento axial
compresión(+) (-) (+) (-)
(+) (-)
Angular Movement Lateral Movement Axial Movement Axial Movement
A = Anclajes / Anchors
B = Guías / Guides
C = Compensadores / Compensators
Anclaje y Guía de una línea
/ Line anchoring and guiding
64
de Goma Rubber
Juntas de expansión Expansion joints
SPECIAL CONSTRUCTIONSCONSTRUCCIONES ESPECIALES
CIRCULARES CIRCULAR
RECTANGULARES - Tipo RC RECTANGULAR - RC Type
65
de Goma Rubber
Juntas de expansión Expansion joints
OTHER PRODUCTS
RUBBER METAL PIPE JOINTS FOR INSTALLATION
ON PUMPS
CODINOR rubber metal pipe joints are meant to beinstalled in piping on pumps, machines and
apparatus in order to absorb noise, vibration andsounds conducted through pipes. Anotheradvantage is that they are electrically nonconductive, an especially important feature
in explosive environments.Recommended for heating
plants, air conditioning,hospitals, schools, etc.
ConstructionCylindrical rubber bodyin EPDM presentingextremely elasticproperties. Flanges are
vulcanised with therubber. CODINOR pipe
joints are suitable for water,cold and hot, and in general any circulating
fluid compatible with the rubber, including mild acids andlyes. Temperature range: from -15º C. to 100 ºC. Workingpressure should not exceed 10 bar.
InstallationReliable functioning requires perfect pipeline layout andinstallation free of strains. At the moment of installation thejoints should be slightly compressed. Tighten with cap screws,whose length should not reach the end of the joint, and plainwashers. Bolt torque is 30 Nm. No tension, torsion or bendingloads are allowed since pipe joints are not meant to absorbmovements or disalignments of the piping system. Do notinsulate or paint!
P.T.F.E. COMPENSATORS
They complete our range of flexible pipeworkelements. PTFE has a unique chemicalresistance to all acids, lyes, chlorides,sulphates, solvents and mixed compound ofany concentration in the temperature rangeof -70 to 260 ºC.Due to their special characteristics (maximum
permanence, easy to clean and odourless)they are often used in chemical processes, food
and pharmaceutical industries.
OTROS PRODUCTOS
ACOPLAMIENTOS ANTIVIBRATORIOS PARA
ENTRADA Y SALIDA DE BOMBAS
Los acoplamientos antivibratoriosCodinor se instalan principalmenteen las bocas de entrada y salida debombas, dispositivos de reglaje,equipos y otros elementos paraamortiguar las vibraciones, losruidos, etc. Otra aplicación es lano continuidad de energíaeléctrica, muy importante paralugares explosivos. Su campode utilización estáprincipalmente en lasinstalaciones de calefaccióny aire acondicionado.
ConstrucciónEl cuerpo es de cauchosintético EPDM, con un altocoeficiente elástico. Lasbridas de acero están vulcanizadas con la goma, sucomportamiento es bueno al agua fría, caliente y fluidos engeneral que sean compatibles con la goma. El rango detemperatura va desde -15º C. hasta 100 ºC. La presión detrabajo no debe exceder de 10 bar.
InstalaciónLos acoplamientos han de montarse exentos de tensiones,siempre bien alineados. Al instalarlo comprimir levemente.Los tornillos de amarre no deben llegar hasta el final, colocarcon arandelas planas. El momento de apriete mas apropiadoes de 30 Nm. No deben utilizarse para absorber dilataciones,tensiones ni desalineaciones de la tubería. No aislar elacoplamiento. No pintar el cuerpo de goma.
COMPENSADORES DE P.T.F.E.
Completan nuestra gama de flexibles parasistemas de tubería. El PTFE ofrece unaexcelente resistencia química a toda clase deácidos, soluciones alcalinas, cloruros, sulfatos,o compuestos mixtos de cualquierconcentración en temperaturas de -70 a 260ºC. Dada su especial característica de máximapermanencia, facilidad de limpieza y ausenciade olores se utilizan a menudo en procesosquímicos, alimenticios y farmacéuticos.