axialventilatoren_rotorex

7/31/2019 axialventilatoren_rotorex

1/9

Ventiladores Axiales /Axial fans200 - 1000 mm

ROTOREX Series


2/9


3/9

3

SUMARIOSUMMARY

INTRODUCCIN / INTRODUCTION 4

Serie HR /HR Series

200 - 250 mm 2-4 polos /poles 10

300 - 315 mm 4 polos /poles 12

350 - 400 mm 4 polos /poles 14

450 mm 4-6-8 polos /poles 16




710/30 mm 6-8 polos /poles 24

710/24 mm 6-8-12 polos /poles 26



1000 mm 12 polos /poles 32

Serie HRB /HRB Series 35



710 mm 6-8 polos /poles 40


ACCESORIOS /ACCESORIES 44


4/9

4

S&P - LA EMPRESADesde su fundacin en el ao 1951, en la localidad de Ripoll (Espaa),

Soler & Palau, S.A. se ha convertido, desde hace ya bastantes aos, en

uno de los lderes mundiales en la fabricacin y venta de todo tipo de

equipos de ventilacin y de extraccin de aire.

Ocho plantas productivas y once empresas filiales propias de comer-

cializacin, ubicadas en diversos pases y continentes constituyen el

actual Grupo S&P que, con un cualificado equipo de ms de 1300

personas, ejerce su actividad en todos los pases del mundo.

S&P - LA ESTRATEGIAInvestigacin y Desarrollo de productos y tecnologa propios; Calidad deproduccin por encima de la media de su campo de actividad y Vocacin

de Expansin sostenible son, y han sido entre otros, tres de los pilares

fundamentales sobre los que descansa la trayectoria de Soler & Palau, S.A.

Contar hoy con ms de 60 Ingenieros titulados en las reas de

Investigacin, Desarrollo, Innovacin y Produccin; Certificaciones

ISO 9001:2000 y 14001:1996 acrediatadas por AENOR (Soler & Palau

fue la primera empresa registrada en Espaa). Laboratorios propios de

ensayo con certificacin oficial EN-45001-89 y crecimientos anuales,

sostenidos en las ltimas dcadas, muy superiores a los de su mercado

son algunos de los logros de la correcta aplicacin de la mencionada

estrategia de empresa.

Nuevos y apasionantes proyectos que vern la luz muy en breve, estnhoy en marcha en el Grupo S&P.

INTRODUCCININTRODUCTION

ISO-9001:2000

ISO-14001:1996

S&P - THE COMPANYSoler & Palau was founded in 1951 in Ripoll (Spain) and since this

date has become one of the worlds leading companies engaged in

the manufacture, sales and distribution of all types of ventilating

and air moving products. Today Soler & Palau has eight production

plants and eleven wholly owned commercial subsidiary companies

located across the globe. Supporting the design, development

production and commercial facilities are a professional team of

more than 1300 employees who ensure that Soler & Palau continue

to have an active presence in all global market sectors.

S&P - THE STRATEGYAt the heart of Soler & Palaus company strategy is the continued

substantial investment in product and manufacturing research,

development and quality control. Since 1951 the sustained

investment in these critical areas has enabled Soler & Palau to

offer to its customers products with unparalleled quality and

reliability. These critical elements of success today form the

fundamental cornerstones of the companys strategy for growth

within increasingly competitive global markets.

Today Soler & Palau has more than 60 highly qualified engineers

working in areas such as product and manufacturing technology

research, development, innovation and production. The engineers

work closely with international safety standards agencies to

ensure that all of Soler & Palaus products are manufactured andsupplied in accordance with only the very latest mechanical and

electrical safety standards. All products are extensively tested

with the companys comprehensive in-house airflow, acoustic and

environmental test laboratories which have been officially

certified by AENOR to EN-45001- 89 standards. Currently Soler &

Palau hold both ISO 9001:2000 and ISO 14001:1996 certifications

and were also the first company in Spain to be registered to the

original ISO 9000 standards.

Through operating a continual rigorous program of new and

existing product development and improvement means that Soler

& Palaus customers are assured that they will continue to receive

products of only the very highest quality and reliability both now

and in the future.


5/9

5

VENTILADORES AXIALES ROTOREXLa Nueva Generacin de Ventiladores Axiales para OEMs de 200 a

1000 mm dimetro.

Despus de un detallado estudio Soler & Palau, S.A ha desarrollado una

Nueva Generacin de Ventiladores Axiales Rotorex, que utilizando lalarga experiencia de diseo y fabricacin de producto acumulada y ya

ampliamente experimentada en numerosos y diversos mercados.

ROTOREX AXIAL FANSThe new generation of OEM, Rotorex Axial Fans from 200 to

1000 mm diameters.

After extensive market and customer research Soler & Palau has

developed a new generation of Rotorex Axial Fans. Using thecompanys extensive experience within the global market, the

new Rotorex range has been specifically designed to meet and

Construccin /Construction S Construccin /Construction PN

Construccin /Construction Q Construccin /Construction P

S&P - LOS PRODUCTOSMillones de aparatos S&P estn actualmente en funcionamiento en todo

el mundo ya sea formando parte de todo tipo de instalaciones de

ventilacin o extraccin de aire: individuales, comunitarias, de estable-

cimientos comerciales y pblicos de todas clases, de empresas indus-

triales y tambin como componentes aplicados en infinidad de equipos

industriales de: aire acondicionado, refrigeracin, calefaccin, filtracin

de aire, humidificacin, etc...., que a su vez, son de aplicacin comn o

altamente especializada segn casos.

S&P - THE PRODUCTSSince 1951 Soler & Palau have supplied millions of ventilating and

air moving products to a diverse customer base across the world.

These products have formed parts of complete ventilation systems

in private, commercial and public building environments.

In addition many of the products have been used as component

parts by manufacturing companies in an endless array of industrial

equipment including air conditioning, refrigeration, heating, air

filtering, humidification and other associated products.


6/9

exceed the demands of the international OEM customer. The

implementation of high performance technically specified products

along with a flexible manufacturing policy have been critical to the

success of the new range.

The enclosed catalogued pages illustrate details of the range of

standard model sizes available.

However because all the major

components used within the new

Rotorex fans (motors, impellers,

guards etc) are manufactured by Soler

& Palau some aspect of the product

can be adapted to precisely match a

given customers fan specifications.

This new generation Rotorex series

can be supplied in two distinct

versions both of which have different

generic characteristics as follows:- HR Series: High airflow efficiencies

with low noise generation; speed

controllable motors and adjustable

sickle bladed impellers.

- HRB Series: High volume airflows

for long-distance projection achieved by optimized straight

aerofoil bladed impellers; improved cost/ airflow ratio and full

sturdy construction.

The new Rotorex axial fans have been specifically designed to be

used as component parts within third party OEM products. As

such Soler & Palau have designed and manufactured these fans

to comply with the: Electromagnetic Compatibility 89/336 EEC

and 92/31 EEC and, Low Voltage 72/23 EEC and 93/68 EEC

European Directives once they have been installed in the final

product. It is therefore important that the final OEM appliance is

tested and certified by the appliance manufacturer according to

EN-60555-2 and EN 60335-1 standards.

Soler & Palau do not accept any responsibility in the failure of the

products supplied which have resulted from the non-compliance

of the final customers appliance.

6

Esta nueva generacin ha sido especialmente enfocada para satisfacer las

ms altas exigencias del mercado OEM y poderse adaptar flexiblemente a

las necesidades individuales de cada producto del cliente consumidor.

Sobre unas prestaciones base de catlogo, la amplia posibilidad de

adaptacin de las prestaciones de los motores elctricos S&P con que vanequipados permiten, con la colaboracin

de nuestros laboratorios de ensayos de

producto aplicado, alcanzar el ptimo

resultado al adap-tarse perfectamente a

las especificaciones del equipo de cada

cliente de manera personalizada

(customized product)

Esta Nueva Generacin se ha estructu-

rado en dos series de producto cuyas

caractersticas claramente diferenciales

son:

- Serie HR: Rendimiento, flexibilidad deuso, silenciosidad, regulabilidad.

- Serie HRB: Potencia, proyeccin de

aire (dardo); mejor ratio m3/Eur., ro-

bustez.

Los ventiladores Rotorex estn concep-

tuados como componentes y estn des-tinados a incorporarse a los

productos acabados finales fabricados por los clientes (OEMs)

consumidores.

Soler & Palau, S.A., ha diseado y fa-bricado estos ventiladores para que

puedan cumplir con las Directivas Europeas de: Compatibilidad

electromagntica 89/336 EEC y 92/31 EEC y de: Baja Tensin 72/23

EEC y 93/68 EEC una vez hayan sido incorporadas a dichos productos

finales. Estos cumplimientos debern verificarse por el fabricante del

equipo final al que van incorporados los ventiladores, ensayando dicho

equipo final segn EN-60555-2 y EN 60335-1.

Soler & Palau, S.A. declina cualquier responsabilidad por la inobservancia

de estas comprobaciones antes de la puesta en marcha de los equipos

finales.

Serie HRB /HRB SeriesSerie HR /HR Series

Departamento I+D+I /R+D+I Department


7/9

7

CARACTERSTICAS ELCTRICASLos motores elctricos de corriente alterna utilizados en la gama

Rotorex son del tipo de rotor exterior, monofsicos con condensador

permanente o trifsicos y construidos segn EN-60034-1.

Las tensiones de alimentacin previstas como standard son: 230 V +/ -

6% monofsica y 230/400 V +/- 6% 400 V +/- 6%, como t rifsica.

Otras tensiones distintas hasta 500 V son posibles bajo demanda. La

frecuencia standard es 50 Hz. Tambin bajo demanda 60 Hz en la

mayora de modelos.

La clase trmica de los motores es B o F ( segn EN 60034-1).

Todos los motores van dotados de protector trmico del tipo de

rearme automtico. Los monofsicos en el interior del devanado y los

trifsicos con cables al exterior para gobernar una maniobra externa a

incorporar por el usuario del producto.

La toma de tierra est incorporada en el cable manguera o bien en la

caja de bornes de conexin.

En los motores monofsicos, con caja de bornes, el condensadorelctrico permanente est incorporado en la misma.

Los valores de potencia absorbida y r.p.m. corresponden

normalmente al punto de caudal mximo y se han medido en el tnel

de ensayo aerodinmico empleando aparatos con embocadura

tcnica y trmicamente estabilizados.

En general todos los motores aceptan regulacin de velocidad por

reduccin de voltaje (electrnica o por transformador). Soler & Palau,

S.A. recomienda el uso de transformadores con tensin de salida

senoidal.

En los motores trifsicos 400 V tringulo, se puede obtener una

segunda velocidad reducida mediante la conexin en estrella de los

devanados y alimentando a la tensin nominal.Si se usan convertidores de frecuencia para regular los ventiladores el

utilizador del producto deber intercalar siempre filtros senoidales en

todas las fases y tierra. Soler & Palau, S.A. declina cualquier respon-

sabilidad por esta posible omisin.

ELECTRICAL CHARACTERISTICSAll new Rotorex series fans incorporate, as standard, asynchronous

external rotor style permanent split capacitor motors. All motors

are manufactured in accordance with EN-60034-1 standards.

The standard Rotorex models are available with single phase 230V

+/- 6% 50Hz or three phase 230/400V +/- 6% or 400V +/- 6%,

50Hz motors. Motors suitable for voltages, up to 500V, are

available on request. Whilst the standard motors supplied operate

at a frequency of 50Hz the majority of motors can also be

supplied, on request, as suitable for operating at 60Hz please

enquire.

All Rotorex series motors include either Class B or F winding

insulation (dependant upon model size) manufactured in

accordance with EN 60034-1 standards. All motors are fitted with

automatic-reset thermal protector which is located inside the

motor winding. On single phase models the thermal protector is

integrated within the main motor winding circuit and has automatic

reset, where-as all three phase models have external leads which

have to be connected to third party protection devices.

All models include an earth connection which is built into the cable

cord or the terminal box dependant upon the model configuration.

Models fitted with a single phase motor and terminal box include

a pre-wired permanent- split capacitor as standard.

All catalogued and product data-plate references of electrical

Power and Speed. correspond to the fans maximum permissible

airflow working point. All airflow and electrical measurements

shown have been measured in Soler & Palaus in-house, ENAC

accredited, test laboratories. All fans have been tested with a bell

mouth inlet plate condition and the results corrected to a motorconstant operating temperature.

The Rotorex motors are suitable for speed control by voltage

regulation using either electronic or by transformer speed control

regulators. Soler & Palau recommends to use transformer

controllers or others sinusoidal output tension regulators type.

All three phase 400V (Delta) connected motors include the

possibility of obtaining a second lower speed by connecting the

motor in Star connection at the wiring terminal block.

The fans are also suitable for use with frequency inverter speed

controllers. It is important however that when using the fans with

frequency inverter controllers the installer must always include

sinusoidal filters on all phases (including earth) of the incoming

electrical supply to the fan. Soler & Palau does not accept any

responsibility for the damage caused resulting from the failure to

fit such precautionary devices.

* ESQUEMA VLIDO PARA TODOS LOS MOTORES, EXCEPTO LOS DE 8 POLOSDIAGRAM VALID FOR ALL THE MOTORS, WITH THE EXCEPTION OF THE 8 POLES

* INTERCAMBIANDO DOS FASES SE CAMBIA LA DIRECCIN DE ROTACIN.INTERCHANGING ANY TWO PHASES THE ROTATION SENSE CAN BE REVERSED.


8/9

8

CARACTERSTICAS MECNICASLa ejecucin standard de los motores es en su mayora IP.44 IP.54

(EN 600529 categora 2). No obstante el grado de proteccin definitivo

deber ensayarse con el ventilador acoplado al equipo final en que se

utiliza.

Los rodamientos a bolas son del tipo cerrado 2Z y sus lmites de uso son

entre: - 40 a + 70 C.

La Life Expectancy L10 de los rodamientos funcionando con el eje

motor en posicin horizontal y con una temperatura mxima del aire

transportado de + 40 C es de unas 40.000 h - Para condiciones de

funcionamiento distintos, consultar.

Los lmites mximo y mnimo de la temperatura del aire transportado por

los ventiladores son, en la ejecucin standard, de + 50 C a 15 C.

Cuando se instalen los ventiladores con el eje en posicin vertical, deber

procederse a la apertura de los agujeros de evacuacin de

condensaciones internas del motor previstas al efecto en la carcasa.

El conjunto rotor y hlice est dinmicamente equilibrado a dos planos(G 6,3) segn la norma ISO 1940 part. 1.

MECHANICAL CHARACTERISTICSAll Rotorex fans are constructed with either IP44 or IP54 protection

(dependant upon the model) in accordance with EN 600529

category 2 standards. However, the IP rating must be tested when

fitted into the end appliance in which it is intented to be used.

All Rotorex models include sealed-for-life ball bearings

assemblies of the closed type 2Z which have a normal

temperature operating range between: - 40 to + 70C. The Life

Expectancy (L10) of the bearings, +40,000 hours, has been tested

with the motor shaft working in a horizontal position and with a

maximum ambient air stream temperature set at + 40C. For other

specific operating conditions please consult.

All Rotorex fans are suitable for operating with ambient air stream

temperatures from + 50C to 15C.

Rotorex model sizes 450 and above are all fitted with special motor

condensation drainage holes as standard. The purpose of these

special drainage holes is to prevent any accumulation of

condensation within the motor when operating in particularly

humid conditions or when the surrounding environment

experiences rapid temperature changes. These drainage holes

have to be opened when the fans are installed at their end position.

The Rotorex motor rotors and propellers assemblies are

dynamically balanced, in two planes, (G 6,3) in accordance with

ISO 1940 part 1 standards.

DISPOSICIONES DE ENSAYOLos datos tcnicos indicados en el catlogo se han obtenido a 230 V

monofsica , 50 Hz 400 V trifsica, 50 Hz.

- Caudal / Presin, por ensayo en los laboratorios S & P de aerodin-mica y de acuerdo con las normas British Standard 848 Part. 1 y

Amca 210 85, todas ellas con aire seco a 20 C, densidad 1,2 kg/m 3

y a 760 mm Hg.

Las pruebas se han realizado con los ventiladores montados en una em-

bocadura tcnicamente ptima, sin reja de proteccin y flujo de aire B.

- Potencia sonora, por ensayo en la cmara anecoica semireververante

de los laboratorios S&P de acstica y segn normas British Standard

848 Part. 2 y a 1,5 m de distancia y en el punto de caudal / presin

indicado en el catlogo lado de aspiracin del aire.

Cmara anecoica /Anechoic chamber Tneles de ensayo aerodinmicos / Aerodynamic test tunnels

TESTING CONDITIONSThe Rotorex series technical data as shown in this catalogue has

been obtained using standard 230V 50Hz single phase or a three

phase 400V 50Hz motors.

Air flow / Pressure Performance.- All Rotorex fans have been tested

for airflow performance in accordance with British Standard (BS)

848 Part. 1 and AMCA 210 85 standards, with dry air at 20C, 1,2

kg/m3 density and at an atmospheric pressure of 760 mmHg.

The airflow tests have been conducted with the fans mounted in

conjunction with an optimised bell-mouth air inlet plate; without

protection guards and with type B airflow direction.

Sound Level Performance.- The fans have been tested for sound

level performance in accordance with British Standard (BS) 848

Part. 2 standards at a distance of 1.5 m from the air inlet part of the

fan and at the airflow / pressure point as indicated in the catalogue.


9/9

9

HR or HRB 1 / 2 - 3 - 4 5 6 7

1 Motor type

- B Singlephase with capacitor

- T Three-phase

2 Number of motor poles (nominal speed)

- 2: (2800 rpm)

- 4: (1400 rpm)

- 6: (900 rpm)

- 8: (700 rpm)

- 12: (450 rpm)

3 Impeller Diameter / Blade pitch angle

- HR Series: sizes 200 to 1000 mm

- HRB Series: sizes 560 to 800 mm

4 Airflow direction

- A: Motor Propeller

- B: Propeller - Motor

5 Connection type

- 0: if nothing is indicated = Terminal box (with capacitor

included in single phase)

- M: Flying lead, standard 500mm (capacitor is not included

in single phase models and must be ordered separately)

6 Construction

- N: Motor-propeller with flat grill

- PN: Motor-propeller with deep / basket grill

- S: Motor-propeller without grill

- P: Motor-propeller with square wall plate and grill

- Q: Motor-propeller with round wall plate and grill

7 Voltage

- 230V 50Hz

- 400V 50Hz

- 230/400 V 50Hz

HR o HRB 1 / 2 - 3 - 4 5 6 7

1 Motor

- B Monofsico con condensador

- T Trifsico

2 Nmero Polos Motor

- 2: (2800 rpm)

- 4: (1400 rpm)

- 6: (900 rpm)

- 8: (700 rpm)

- 12: (450 rpm)

3 Dimetro hlice

- Serie HR: 200 a 1000 mm

- Serie HRB: 560 a 800 mm

4 Direccin Flujo Aire

- A: Motor Hlice

- B: Hlice - Motor

5 Tipo de Conexin

- 0: Si no se indica nada = Caja de bornes (con condensador

incluido en los monofsicos)

- M: Cable manguera (no incluye condensador en los

monofsicos)

6 Construccin

- N: Motor-hlice + reja plana

- PN: Motor-hlice + reja profunda

- S: Motor-hlice sin reja

- P: Motor-hlice con embocadura cuadrada y defensa

- Q: Motor-hlice con embocadura circular y defensa

7 Voltaje

- 230 V 50 Hz

- 400 V 50 Hz

- 230/400 V 50 Hz

NOMENCLATURA MODELOSLa nomenclatura de los modelos est integrada por los siguientes

conceptos:

MODEL DESCRIPTIONThe part code descriptions are composed of the following:

axialventilatoren_rotorex

Documents