Manufacturers of the world’s most technically advanced systems for

permanent concrete repair, moisture proofing and protection treatments.

Introduction

• Oxtek Australia Pty Ltd / Protect Crete are specialists in Concrete Protection

• 19 year old Australian Owned company & Manufactured

• Supply nationally and to New Zealand

• All products are VOC free

• All products can be applied to concrete of any age

• Single component application

• Our team has over 100 years of combined experience in the Concrete, Coatings & the Flooring industry

• We recommend on site assistance and offer training FOC

• All systems are warranted if applied by an approved trained applicator

• www.oxtekaus.com

Moisture related flooring failures are costing $1 billion annually in USA

Oxtek are currently assisting with a multistorey development that now needs grinding to the value of $400K! The Government of Western Australia has now issued a directive that an allowance for a moisture barrier on all projects with resilient flooring be factored in at the start of construction!

Moisture Issues cost $$$$$$

Densi-Proof™

• Cures, Densifies, Hardens and Waterproofs up 200mm

• Old & new concrete

• Doesn’t form a membrane - After trade friendly (Wattyl, Dulux, Ardex, Carboline, BASF, RLA Polymers)

• Colloidal Silica – fills all capillaries and voids created by the bleed water.

• A cure regime equal to water pond curing, giving a higher MPa value, increased tensile strength and

provides reduced drying shrinkage cracking

• Complies with AS1884-2012 Floor Coverings-Resilient Sheet & Tiles – Installation Practises

• Environmentally Friendly & HACCP Certified - Low Odour – 0.0g/l VOC

• A 15 year warranty can be provided with an approved trained applicator.

Efflorescing Mould & Mildew Bacteria's

Reinforcing Deterioration

The permanent gel “completes” the concretes matrix stopping elements such as water, salts, oils etc from moving through the concrete.

Shrinkage and Cracking

Permanent Protection

Densi-Proof™ plus

X300 Surface Repeller

• Cures, Densifies, Hardens, Waterproofs & Protects the surface

• Old & new concrete

• Colloidal Silica – fills all capillaries and voids created by the bleed water.

• Surface protection against acids, oils, water based stains, chemicals, body fluids, wine, grease and others.

• Ease of cleaning

• Doesn’t form a membrane - After trade friendly

• Environmentally Friendly & HACCP Certified - Low Odour – 0.0g/l VOC

• A 15 year warranty can be provided with an approved trained applicator.

• Designed for high corrosion areas – Jetty's, Bridges, Sea Walls

• Densifies, Hardens and Waterproofs

• Curing method if used at time of pour

• Will purge contamination from existing concrete

• Prevents or greatly retards any future corrosion

• Stops or greatly retards existing corrosion

• Enhances surface traction quality

• Increases acid/chemical resistance

Densi-Proof™REO Protect

MOISTURE-FIX®

• Same as Densi -Proof™ - the only difference is in the application method.

• Pour & Spread or pump spray.

• Cures, Densifies, Hardens and Waterproofs

• Old & new concrete

• Doesn’t form a membrane - After trade friendly (Wattyl, Dulux, Ardex, Kiesel, BASF, RLA Polymers)

• Complies with AS1884-2012 Floor Coverings-Resilient Sheet & Tiles – Installation Practises

• Environmentally Friendly & HACCP Certified - Low Odour – 0.0g/l VOC

• A 15 year warranty can be provided with an approved trained applicator.

MOISTURE-FIX® - Integral Part of Flooring Systems

• AS1884-2012 moisture proof concrete before flooring applications.

• Batten fixed floating Timber Floors

• Loose laid Carpet & Vinyl Carpet Tiles Fixed with Pressure Sensitive Adhesive

• Commercial & Domestic Vinyl applications

HOSPITALS - SCHOOLS - PRISONS - AGED CAR FACILITIES - GOVERNMENT BUILDINGS

SHOPPING CENTRES - RESTAURANTS - FAST FOOD OUTLETS

Museum Of Contemporary Art

• Moisture Fix® is used as curing compound, hardener & densifier at the time of pour on burnished slab.

• X300 Surface Repeller™ used to protect the concrete surface from contaminants

Before After

• Concrete must be porous for the Moisture fix® or Densi-Proof™ to penetrate. • Contaminated areas will require grinding to allow penetration. • In extreme cases more than one application is required.

Moisture-Fix® & Densi-Proof™- Purge Contaminants

X100- Green Concrete Cure & Hardener

• Curing Compound only

• Cures equal to water ponding

• To be used if no moisture barrier is required – Low Cost Cure Regime

• After trade friendly – no preparation required if coating

• Environmentally Friendly & HACCP Certified

• Low Odour – 0.0g/l VOC

X300 Surface Repeller

• To be used in conjunction with either Moisture Fix or Densi-Proof.

• Water Repellency and Oil Resistance / Enhances slip resistance

• Reduces Staining / UV Resistant / Improves Fungus / Mildew Resistance

• Environmentally friendly & HACCP approved

• Vertical or horizontal substrates.

• Low Odour – 0.0g/l VOC

X400 Lustre Shield

• To be used in conjunction with either Moisture Fix or Densi-Proof.

• Polished or highly steel trowelled (burnished) concrete surfaces.

• Suitable for indoor use only. A high gloss finish can be achieved with Luster Keep.

• Water Repellency and Oil Resistance

• Gives surface a light satin sheen. It can be buffed to a higher sheen by using a Polyvac machine with a

buffing pad attached.

• Reduces Staining / Eliminates efflorescence

• Environmentally friendly & HACCP approved

• Low Odour – 0.0g/l VOC

X420 Lustre Keep

• To be used in conjunction with Lustre Shield

• Polished or highly steel trowelled (burnished) concrete surfaces.

• Suitable for indoor use only.

• A high gloss film coating

• High Solids ensures excellent durability in high traffic areas

• Stain resistant, non yellowing, easy care

• Water Repellency and Oil Resistance

• Environmentally friendly & HACCP approved

• Low Odour – 0.0g/l VOC

IKEA Adelaide & Clayton – Furnishing Store

• Hansen Yunken SA - 23,500 square metre complex had the world’s latest and best concrete floor technology.

• Protect Crete Densi-Proof™ was used at time of pour as industry best cure and seal and surface hardener.

• The Densi-Proof™ and X400 Luster Shield System has ensured an easy-clean, long lasting, attractive floor that

breathes and is easily repaired.

• X400 Lustre Shield is nominated for ‘Most Innovative Product of the Year’ by the Flooring and PIC Floor

Magazine

X520 Warehouse & X550 Carpark

• Cures, Hardens & Densifies concrete

• Reduces Tyre Screeching & marking

• Reduces Dust & Staining

• No mechanical preparation required when Line Marking or painting (Wattyl Tested)

• UV Resistant & Retards Efflorescence

• Resists Oil Staining & Alkali Attack

Case Studies

Safeway Forest Hills 2300m2 Bi-Lo Greenvale 2200m2 Safeway Camberwell 1200m2 A.U.R. Narre Warren 2300m2 Dan Murphy Vermont South 200m2 Kmart Belmont 500m2 Safeway St Albans 2000m2 Bi-Lo Burntbridge 1800m2 Safeway Torquay 2500m2 Spotlight Bayswater 2500m2 Safeway Langwarrin 3200m2 Bakers Delight Various 760m2 David Jones Southland 1000m2 Woolworths Coles Ikea Myer and many more including Hotels, Clothing and Retail Food.

WEBSITE - www.oxtekaus.com

Our Team

Louise Tebble

National Sales Manager NSW Email: louise@oxtekaus.com.au

Tel: +61 2 9725 1666 Fax: +61 3 9798 6250 Mbl: +61 407 244 547

Gary Curwood Group General Manager QLD

gary@oxtekaus.com.au Tel: +61 3 9798 7534 Fax: +61 3 9798 6250 Mbl: +61 420 977 713

Frank Ryan Technical Manager National

frank@oxtekaus.com.au Tel: +61 3 9798 7534 Fax: +61 3 9798 6250 Mbl: +61 458 601 643

Lea & Karolyn Administration VIC

leac@oxtekaus.com.au karolynw@oxtekaus.com.au

Tel: +61 3 9798 7534 Fax: +61 3 9798 6250