opcom3500e presentation.ppt

8/10/2019 OPCOM3500E Presentation.ppt

1/44

Raisecom MSAP

OPCOM3500E


2/44

How did you connect PDH toSDH before OPCOM3500E?


3/44

Trouble in coax cable connection?


4/44

What are we facing?Waste cost of cables, connectors, and DDF

Waste cost of rack space

Not easy to check and manufacture so many cables

Not easy to manage PDH multiplexer from SDH ring

PDH and SDH managements are in deferent NMS software

Ethernet access on MSTP can not reach remote branch on customers site

There is no Ethernet fiber optical ports on my SDH equipments

How can we aggregate Ethernet traffic by VLAN without Ethernet Switch in

SDH ring

Non-protection in current PDH fiber links


5/44

OPCOM3500E in C.O.


6/44

Multi-Service Access Platform

Overview

OPCOM3500E SDH multi-service access platform isaggregation equipment, which is designed for traditional

TDM service and broad band IP data service of MAN.

It can meet carrier and customers requirement of

different class bandwidth and multi-service access.


7/44

Typical Application


8/44


9/44

Aggregate all kinds of Raisecom TDM and Ethernet CPE to SDH

Total 4 STM-1 ports or 2 STM-4 ports aggregation unit

No-block cross connection of 1616 VC4 or 10081008 VC12

VC12 cross connection between all tributary units and aggregation units

15 slots, including 2 slots of power supply, 1 slot of management, 2 slots for

aggregation units, 10 slots for tributary units

2Mbit /2MHz clock input & output

Service non-stop when NMS card fail or be taken off

Features


10/44

Chassis OPCOM3500E-12DC/D

MSAP chassis

Network managementboard OPCOM3500E-NMS

SNMP management system

Aggregationboard OPCOM3500E-STM1-M

1 uplink STM-1 optical interfaces

Aggregation board

OPCOM3500E-STM4-M

2 uplink STM-4 optical interfaces

Aggregation board

OPCOM3500E-SUB-ESW-2GE

2 Gigabit Ethernet combo interfaces

Aggregate all tributary boards Fast-

Ethernet uplinks

OPCOM3500E adopts rack design, including chassis, fans board, plug board and

power supply board. For the plug board, including following parts:

OPCOM3500E Basic System


11/44

SNMP network

management

port

Console

port

RS232

Users

channel2M

clock

input

2M

clock

output

Network management module of OPCOM3500E Platform

1) It communicates with network management

software of upper layer and accepts management

of upper layer.

2) It can manage OPCOM3500E equipment, and

corresponding remote equipment.

3) Provide clock for whole OPCOM3500E system.

4) Support on-line upgrade of system and tributary

board.

OPCOM3500E-NMS


12/44

Aggregate unit of OPCOM3500E system

Dual STM-1 optical interfaces, with options of either two individual

path or 1+1 path protection

cross module of 16x16 VC4 / 48x48 VC3 / 1008x1008 VC12

Software on-line up-grade of local and remote equipment

Auto Laser Shut down (ALS)

OPCOM3500E-STM1-M


13/44

OPCOM3500E-SMT1-S SDH STM-1 tributary

2 STM1 optical ports to provide 1+1 link to SDH CPE terminal multiplexer

OPCOM3500E-16E1(-BL) E1 tributary16 E1 electrical ports 75ohm or 120ohm

OPCOM3500E-30*8 PDH fiber tributary

8 E1 optical ports to connect remote E1(or V.35) fiber modems

OPCOM3500E-120*4, OPCOM3500E-120H*4 PDH fiber tributary

4 PDH fiber optical ports, each port includes 4 E1 traffics, to connect remote PDH

4E1 CPE.

OPCOM3500E-240*2 PDH fiber tributary

2 PDH fiber optical ports, each port includes 8 E1 traffics, to connect remote PDH

8E1 CPE.

OPCOM3500E-120EOS*4 PDH fiber tributary

4 RCMS PDH fiber optical ports, each port includes 4 E1 and 100Mbps Fast-Ethernet traffics, to connect remote RCMS2811 PDH CPE. The Ethernet data could

be mapped to VC12 though EoS function.

OPCOM3500E-120FE*4-GE PDH fiber tributary

4 RCMS PDH fiber optical ports, each port includes 4 E1 and 100Mbps Fast-

Ethernet traffics, to connect remote RCMS2811 PDH CPE. The Ethernet data could

be aggregated to a GE port on front panel.

OPCOM3500E Tributary board


14/44

OPCOM3500E-P240EOS PDH fiber tributary

2 RCMS PDH fiber optical ports in 1+1 protection, includes 8 E1 and 100MbpsFast-Ethernet traffics, to connect remote RCMS2811 PDH CPE. The Ethernet data

could be mapped to VC12 though EoS function.

OPCOM3500E-P240FE PDH fiber tributary

2 RCMS PDH fiber optical ports in 1+1 protection, includes 8 E1 and 100Mbps

Fast-Ethernet traffics, to connect remote RCMS2811 PDH CPE. The Ethernet port

on front panel is used for connection with customers Ethernet Switch.



15/44

OPCOM3500E-EOS-8FX, OPCOM3500E-EOS-8FE, OPCOM3500E-4FE,

OPCOM3500E-EOS-4FX, Ethernet over SDH tributary

8 or 4 Ethernet ports, optional optical and electrical, EoS board, without VLAN Tag

configuration

OPCOM3500E-EOSE-8FX Ethernet over SDH tributary

8 100Base-Fx optical ports, EoS board, VLAN Tag configurable

OPCOM3500E-8EOS-FE, OPCOM3500E-8EOS-FX Ethernet over SDH tributary

1 Ethernet optional optical or electrical port. EoS board, aggregates 1~8 VCGs to

one Ethernet port

OPCOM3500E-4EOS-4FE Ethernet over SDH tributary

4 Ethernet electrical port over 1~4 VCGs. EOS board, build-in Layer 2 Switch,

Double VLAN tag available

OPCOM3500E-EOP-FXE1*8, OPCOM3500E-EOP-FEE1*8 Ethernet over PDH

tributary

8 Fast-Ethernet ports, optional fiber optical ports and electrical ports, EoPDH board

OPCOM3500E-EOP-FE8E1, OPCOM3500E-EOP-FE16E1 Ethernet over PDH

tributary

One 10/100Base-Tx electrical port, EoPDH board, Inverse multiplexing

OPCOM3500E-EOPS-8E1 Ethernet over PDH and SDH tributary

8 E1 ports, a bridge of Ethernet over PDH network and Ethernet over SDH network



16/44

OPCOM3500E-STM1-S

Tributary unit, 2 STM-1 fiber links.

Dual STM-1 fiber link for individual directions or 1+1 protection

Total 63 VC12 capability

Automatic Laser Shutdown (ALS) function.


17/44

OPCOM3500E-STM1-S Application


18/44

OPCOM3500E-30x8

Tributary unit, includes 8 E1 fiber links.

8 independent PDH parts with 8 independent PDH optical interfaces.

Automatic Laser Shutdown (ALS) function.

Alarm indicator of local and remote equipment.

Dying Gasp: The indication of remote power down in NNM software

Build-in Bit Error test unit

Unframed or Framing E1 (time-slots configurable)


19/44

30x8 Application


20/44

OPCOM3500E-120x4 & 240x2tributary unit of four PDH MUX parts, communicate with remote

PDH equipment through four PDH optical links.

120x4 has 4 PDH optical ports, each port capability is 4E1

240x2 has 2 PDH optical ports, each port capability is 8E1

Auto Laser Shut down (ALS)

Local and remote loop-back function of E1

LED Indicator can indicate local and remote alarm

On-line software up-grade


21/44

120x4 & 240x2 Application


22/44

OPCOM3500E-120EOSx4

OPCOM3500E-120FEx4-GETributary unit of RCMS PDH ports

4 Multi-service fiber optical ports, each port capability is 100Mbps

wire speed Fast-Ethernet and 4E1

150Mbps bandwidth in fiber, 100M for Ethernet, 50M for E1 links

& Management information

E1 data will be mapped to VC12

Ethernet data in 120EOSx4 fiber will be mapped to VC12 by EOS

function, GFP and LAPS available

Ethernet data in 120FEx4-GE fiber will be aggregated to GE porton front panel

Dying Gasp: LED indicator or software indication of remote Power

Down


23/44

OPCOM3500E-P240EOS

OPCOM3500E-P240FE

Tributary unit of RCMS PDH ports

1+1 protection line fiber

150Mbps bandwidth in fiber, 100M for Ethernet, 50M for 8

E1 links

& Management information

8 E1 links are mapped to VC12

The Ethernet data in P240EOS will be mapped to VC12

though EoS function

The Ethernet data in P240FE will be aggregated to Fast-

Ethernet port on front panel GFP and LAPS

To communicate remote CPE RCMS2811 of 1+1

protection

Dying Gasp: LED indicator or software indication of remote

Power Down


24/44

120EOS, 120FE, P240EOS,

P240FE Application


25/44

OPCOM3500E-EOS(E)-8FX

OPCOM3500E-EOS-8FE

Tributary unit of Ethernet ports

8 Ethernet interface over 8 VCG individually

EOS-8FX: 8 x 100Mbps Ethernet optical interface

EOSE-8FX: 8 x 100Mbps Ethernet optical interface (VLAN ID

configurable)

EOS-8FE: 8 x 10/100Mbps Ethernet interface

8 links Ethernet service have rate limiting function with N*VC12 step,

and they can share maximum 63 VC12

GFP and LAPS encapsulation, and it supports LCAS function

Remote Raisecom 100M Media Converter can be network managed

On-line software up-grade of local equipment


26/44

EOSE-8FX EOS-8FE application


27/44

OPCOM3500E-8EOS-FX

OPCOM3500E-8EOS-FE


Aggregate 1~8 VCG to single Fast-Ethernet aggregation

trunk

The Ethernet aggregation trunk port is on front panel or

connect to GE aggregation board through backboard

Optional fiber optical Ethernet interface or Electrical

Ethernet interface

GFP, LAPS available

VCAT, LCAS supportable

Maximum 8K MAC address, and 4096 VLAN ID IEEE802.1q VLAN and Port VLAN, Q-in-Q double tag

4 output priority Queues

MTU up to 1632 bytes



28/44

8EOS-FX/FE application


29/44

OPCOM3500E-4EOS-4FE


Multiple Application in EOS

Map 4 Fast-Ethernet port to 4 VCGs individually, similar

function as OPCOM3500E-EOS-4FE/8FE

Aggregate maximum 4 VCGs to one Fast-Ethernet,

similar function as OPCOM3500E-8EOS-FE

Map 4 Fast-Ethernet port to single VCG, VLAN tag

configurable

GFP, LAPS available

LCAS supportable

Maximum 8K MAC address, and 4096 VLAN ID

IEEE802.1q VLAN and Port VLAN, Q-in-Q double tag

4 output priority Queues

MTU up to 1632 bytes



30/44

4EOS-4FE Application

Multi VLAN over single VCG


31/44

OPCOM3500E-EOP-FXE1x8

OPCOM3500E-EOP-FEE1x8Tributary unit of Ethernet ports

8 x 100M Ethernet interface service over single E1 (VC12)

EOP-FXE1x8 has 8 individual 100Mbps fiber optical Ethernet ports

EOP-FEE1x8 has 8 individual 10/100Mbps electrical Ethernet ports

Adopt SFP optical interface, plug and play

Each Ethernet link could be converted to one unframed of framing E1,

and could be rate limited with N*64Kbps DS0

Privately HDLC encapsulation with EoPDH Technology

Remote Raisecom 100M Media Converter can be network managed



32/44

EOP-FXE1x8 Application


33/44

OPCOM3500E-EOP-FE8E1


Ethernet over 1~8 E1 Inverse Multiplexer inside

10/100Mbps electrical Ethernet port on front panel

8 E1 are mapped into VC12s to Aggregation Unit

Privately HDLC encapsulation with EoPDH Technology



34/44

EOP-FE8E1 Application


35/44

OPCOM3500E-EOPS-8E1


Bridge the gap between EoPDH network and EoSDH network

8 E1 electrical port on front panel are used for connect to RC95x series

inverse multiplexer only Convert E1 signals from front panel interface to Fast-Ethernet single by

EOP technology, and then convert the Fast-Ethernet signal to N*VC12

by EOS technology

GFP, LAPS available

LCAS, N-LCAS function


36/44

EOPS-8E1 Application


37/44

OPCOM3500E-16E1 is E1 service unit of OPCOM3500,

it can provide 16 unbalanced E1 interfaces, and it

can be mapped in SDH frame through aggregate

unit of OPCOM3500

Provide complete alarm, performance monitor.

OPCOM3500E-16E1


38/44

16E1 Application

OPCOM3500E

STM-1/STM-4

Backup Ring

E1 links

2G BTS


39/44

Aggregation Units Protection


40/44

STM-4 TM & ADM


41/44

Tributary Units Protection

Union NMS for All Raisecom


42/44

Union NMS for All Raisecom

Equipments


43/44

Raisecom NNM GUI software


44/44

Thank you!

opcom3500e presentation.ppt

Documents