FWM139MP3-CD Mini Hi-Fi System

pg001-pg020_FWM139_55_Eng 2006.5.23, 16:051

2

MéxicoEs necesario que lea cuidadosamente su instructivo demanejo.

No abrir, riesgo de choque eléctrico

Verifique que el voltaje de alimentaciónsea el requerido para su aparato

ATENCIÓN

Para evitar el riesgo de choque eléctrico, no quite la tapa.En caso de requerir servicio, dirijase al personal calificado.

PRECAUCIÓN - ADVERTENCIA

Descripción: Minisistema de AudioModelo : FWM139/55Alimentación: 110–127 / 220–240V~; 50–60 HzConsumo: 42WImportador : Philips Mexicana, S.A. de C.V.Domicilio: Av. La Palma No.6

Col. San Fernando La HerraduraHuixquilucan

Localidad y Tel: Edo. de México C.P. 52784Tel.52 69 90 00

Exportador: Philips Electronics HK, Ltd.País de Origen: ChinaNº de Serie: ______________________________

LEA CUIDADOSAMENTE ESTE INSTRUCTIVOANTES DE USAR SU APARATO.

CAUTIONUse of controls oradjustments or performanceof procedures other thanherein may result inhazardous radiationexposure or other unsafeoperation.

AVISO IMPORTANTEPhilips Mexicana, S.A. de C.V. no se hace

responsable por daños o desperfectos causados por:– Maltrato, descuido o mal uso, presencia de

insectos o roedores (cucarachas, ratones etc.).– Cuando el aparato no haya sido operarado

de acuerdo con el instructivo del uso, fuera de los valores nominales y tolerancias de lastensiones (voltaje), frecuencia (ciclaje) dealimentación eléctrica y las características que deben reunir las instalaciones auxiliares.

– Por fenómenos naturales tales como:temblores, inundaciones, incendios, descargaseléctricas, rayos etc. o delitos causados porterceros (choques asaltos, riñas, etc.).

pg001-pg020_FWM139_55_Eng 2006.5.23, 16:052

3

2&(™)¡

%

5

#

4

3

8

$

!

£

4

1

2

%

^

3

9

$

0

@

5

6

!

§8

7

&

FWM139

pg001-pg020_FWM139_55_Eng 2006.5.23, 16:053

4

pg001-pg020_FWM139_55_Eng 2006.5.23, 16:054

5

En

glis

hPo

r tu

guês

Esp

año

l

Index

English ------------------------------------------------ 6

Español --------------------------------------------- 21

Português ------------------------------------------ 36

pg001-pg020_FWM139_55_Eng 2006.5.23, 16:055

6

En

glish

Contents

General InformationEnvironmental information ................................ 7Supplied accessories ............................................ 7Safety information ................................................ 7

PreparationRear connections ................................................. 8Inserting batteries into the remote control ... 9

ControlsControls on the system and remotecontrol .................................................................. 10

Basic FunctionsSwitching the system on ................................... 11Power-saving automatic standby ..................... 11Adjusting volume and sound ............................ 11

CD/MP3 OperationPlaying a disc ........................................................ 12Selecting a different track ................................. 12Finding a passage within a track ...................... 12Playing an MP3 disc ...................................... 12-13Different play modes: Shuffle and Repeat ..... 13Programming track numbers ........................... 13Reviewing the programme ............................... 13Erasing the programme ..................................... 13

Radio ReceptionTuning to radio stations .................................... 14

Tape Operation/RecordingTape playback ...................................................... 15General information on recording ................. 15Synchro start CD recording ............................ 15Recording from the radio ................................. 16

Maintenance .............................................. 16

Clock/TimerSetting the clock ................................................. 17Setting the timer ................................................. 17Activating and deactivating TIMER ................. 17Activating and deactivating SLEEP .................. 18

Specifications ........................................... 18

Troubleshooting .............................. 19-20

pg001-pg020_FWM139_55_Eng 2006.5.23, 16:056

En

glis

h

7

General Information

IMPORTANT!PLEASE NOTE THAT THE VOLTAGESELECTOR LOCATED AT THE REAR OFTHIS SYSTEM IS PRESET AT 220V FROMTHE FACTORY. FOR COUNTRIES THATOPERATE AT 110V-127V, PLEASE ADJUSTTO 110V-127V BEFORE YOU SWITCH ONTHE SYSTEM.

Supplied accessories– 2 speaker boxes– remote control

Environmental InformationAll unnecessary packaging has been omitted. Wehave tried to make the packaging easy toseparate into three materials: cardboard (box),polystyrene foam (buffer) and polyethylene (bags,protective foam sheet).

Your system consists of materials which can berecycled and reused if disassembled by aspecialized company. Please observe the localregulations regarding the disposal of packagingmaterials, exhausted batteries and oldequipment.

Safety Information Before operating the system, check that the

operating voltage indicated on the typeplate (orthe voltage indication beside the voltageselector) of your system is identical with thevoltage of your local power supply. If not, pleaseconsult your dealer.

Place the system on a flat, hard and stablesurface.

Place the system in a location with adequateventilation to prevent internal heat build-up inyour system. Allow at least 10 cm (4 inches)clearance from the rear and the top of the unitand 5 cm (2 inches) from each side.

The ventilation should not be impeded bycovering the ventilation openings with items,such as newspapers, table-cloths, cur tains, etc.

Do not expose the system, batteries or discs toexcessive moisture, rain, sand or heat sourcescaused by heating equipment or direct sunlight.

No naked flame sources, such as lighted candles,should be placed on the apparatus.

No objects filled with liquids, such as vases, shallbe placed on the apparatus.

The apparatus shall not be exposed to drippingor splashing.

Install this unit near the AC outlet and where theAC power plug can be reached easily.

If the system is brought directly from a cold to awarm location, or is placed in a very damp room,moisture may condense on the lens of the discunit inside the system. Should this occur, the CDplayer would not operate normally. Leave thepower on for about one hour with no disc in thesystem until normal playback is possible.

The mechanical parts of the set contain self-lubricating bearings and must not be oiled orlubricated.

When the system is switched to Standbymode, it is still consuming some power.To disconnect the system from thepower supply completely, remove the ACpower plug from the wall socket.

The making of unauthorized copies of copy-protected material, including computerprogrammes, files, broadcasts and soundrecordings, may be an infringement ofcopyrights and constitute a criminal offence.This equipment should not be used for suchpurposes.

pg001-pg020_FWM139_55_Eng 2006.5.23, 16:057

8

En

glish

Preparations

Rear connections

The type plate is located at the back of thesystem.

A Power– Before connecting the AC power cord to thewall outlet, ensure that all other connectionshave been made.– If your system is equipped with a VoltageSelector, set the VOLTAGE SELECTOR to thelocal power line voltage.

WARNING!– For optimal performance, use only theoriginal power cable.– Never make or change any connectionswith the power switched on.

B Speakers Connection

Front SpeakersConnect the speaker wires to the SPEAKERSterminals, right speaker to "R" and left speaker to"L", coloured (marked) wire to "+" and black(unmarked) wire to "-".

Fully insert the stripped portion of the speakerwire into the terminal as shown.

Notes:– For optimal sound performance, use thesupplied speakers.– Do not connect more than one speaker to anyone pair of +/- speaker terminals.– Do not connect speakers with an impedancelower than the speakers supplied. Please refer tothe SPECIFICATIONS section of this manual.

Speaker(right)

Speaker(left)

pg001-pg020_FWM139_55_Eng 2006.5.23, 16:068

En

glis

h

9

Inserting batteries into theremote controlInsert two batteries type R03 or AAA into the

remote control with the correct polarity as indicated by the “+”and“-” symbols inside the battery compartment.

CAUTION!– Remove batteries if they are exhaustedor will not be used for a long time.– Do not use old and new or differenttypes of batteries in combination.– Batteries contain chemical substances,so they should be disposed of properly.

Preparations

pg001-pg020_FWM139_55_Eng 2006.5.23, 16:069

10

En

glish

Controls (illustrations on page 3)

Controls on the system andremote control

1 LCD Display– shows the status of the system.

2 iR SENSOR– infrared sensor for remote control.

3 PROGRAM (PROG)for CD ................. programs tracks and reviews the

program.4 STANDBY-ON y (POWER y)– switches the system to standby/on.

5 2;

for CD/MP3 ..... starts or pauses CD playback.

6 TITILE-/+ ¡1 / 2™

for CD/MP3 ..... skips to the beginning of acurrent track/previous/ nexttrack (title).(press and hold) fast searchesback and forward within a track/disc.

for clock/timer .. adjusts the hours and minutesfor clock / timer functions.

7 Source selector (CD/ TAPE/TUNER)– selects the respective sound source for CD/

TAPE/ TUNER.

8 CLOCK/TIMER– sets the clock or timer function.

9 Band selector (MW/FMST/FM)for Tuner ............. selects waveband: MW, FM

(stereo) or FM (mono).

0 OPEN/CLOSE– open/close the CD door.! STOP 9

for CD/MP3 ..... stops CD playback or erases aCD program.

@ TUNING– tunes to a radio station.# DISPLAY– display the current time.$ DBB(Dynamic Bass Boost)– enhances the bass.

% VOLUME 3/4– adjusts the volume level.

^ n– connect headphones.

& Tape Deck OperationRECORD 0 ....... starts recording.PLAY 2 ................. starts playback.REW à /F.FWD á fast rewinds/

forwards the tape.STOP•OPEN 9/ stops the tape;

opens the tape compartment.PAUSEÅ ............ pauses recording or playback.

* REPEATfor CD/MP3 ..... repeats a track/CD programme/

entire CD.( SHUFFLE

for CD/MP3 ..... plays CD tracks in random order.) SLEEP– activates/deactivates or selects the sleeper time.

¡ MUTE– switches playback sound off and on.

™ TIMER ON/OFF– activates/deactivates the timer.

£ DSC (Digital Sound Control)– selects sound characteristics: CLASSIC/JAZZ/

POP/ROCK.≤ í/ë

for CD/MP3 ..... skips to the beginning of acurrent track/previous/next track(title).

for CD/MP3 ..... (press and hold) fast searchesback and forward within a track/CD.

for clock/timer adjusts the hours and minutes for clock/timer functions.

∞ ALBUM-/+ 5 /6for MP3 ............... selects an album.

§ ALBUM+for MP3 ............... selects an album upward.

pg001-pg020_FWM139_55_Eng 2006.5.23, 16:0610

En

glis

h

11

Basic Functions

IMPORTANT:Before you operate the system, completethe preparation procedures.

Switching the system on

Press STANDBY-ON y (POWER y on theremote). The system will switch to the last selectedsource.

To switch the system to standby mode Press STANDBY-ON y (POWER y on the

remote). The volume level (up to a maximum volumelevel of 15), interactive sound settings, lastselected source and tuner presets will beretained in the player's memory.

Power-saving automatic standbyThe power-saving feature automatically switchesto standby 30 minutes after a tape or CDplayback has ended and no control is operated.

Adjusting volume and sound

1 Press VOLUME 3/4 to increase or decreasevolume. Display shows the volume level UoL and anumber from 0-40.

2 Press DBB to switch bass enhancement on oroff. Display shows: DBB ifthe DBB is activated.

3 Press DSC on the remoteto repeatedly to select thedesired soundeffect:CLASSIC,JAZZ, POPor ROCK.

4 Press MUTE on theremote control to stopsound play-back instantly. Playback will continue without sound and thedisplay shows MUTE.

To start sound playback you can:– press MUTE again;– adjust the volume controls.

FWM139

pg001-pg020_FWM139_55_Eng 2006.5.23, 16:0611

12

En

glish

CD/MP3 Operation

5 To pause playback press 2;. Press 2; again toresume play. The display freezes and the elapsed playingtime flashes when playback is interrupted.

6 To stop disc playback, press STOP 9.

Note: CD playback will also stop when;– the CD door is opened.– the disc has reached the end.– you select another source: TAPE, TUNER.– you select standby.

Selecting a different track Press TITILE-/+ ¡1 or 2™ (í/ë on the

remote) once or repeatedly until the desiredtrack number appears in the display.

Press 2; to start playback.

Finding a passage within a track1 Press and hold down TITILE-/+ ¡1 or 2™

(í/ë on the remote). The disc is played at high speed and lowvolume.

2 When you find the passage you want, releaseTITILE-/+ ¡1 or 2™ (í/ë on the remote). Normal playback continues.

Playing an MP3 disc1 Load an MP3 disc.

The disc reading time may exceed 10seconds due to the large number of songscompiled into one disc. "XX YYY" is displayed. XX is the currentalbum number and YYY is the current tracknumber.

2 Press ALBUM+ (ALBUM-/+ 5 /6 on theremote) to select a desired album.

3 Press TITILE-/+ ¡1 / 2™ (í/ë on theremote) to select a desired track. The album number will change accordingly asyou reach the first track of an album by pressing

TITILE- 4 (í on the remote) or the last

track of an album by pressing TITILE+ ¢(ë on the remote).

4 Press 2; to start playback.

IMPORTANT:The lens of the CD player should never betouched.

Playing a discThis CD player plays Audio Discs including CD-Recordables, CD-Rewritables and MP3 CD.

¶ CD-ROM, CD-I, CDV, VCD, DVD or computerCDs, however, are not possible.

1 Adjust the source selector to select CD source.

2 Press OPEN/CLOSE on the system to openthe CD compartment. OPEN is displayed when you open the CDcompartment.

3 Insert a disc with the printed side facing up andpress OPEN/CLOSE to close the CD door. rEAd is displayed as the CD player scansthe contents of a disc, and then the total numberof tracks and playing time (or the total numberof albums and tracks for MP3 disc) are shown.

4 Press 2; to start playback. The current track number and elapsedplaying time of the track are displayed during discplayback.

FWM139

pg001-pg020_FWM139_55_Eng 2006.5.23, 16:0612

En

glis

h

13

CD/MP3 Operation

Programming track numbersProgramme in the STOP position to select andstore your disc tracks in the desired sequence. Ifyou like, store any track more than once. Up to20 tracks can be stored in the memory.

1 Press PROGRAM (PROG on the remote) toenter the programming mode.

2 Use TITILE-/+ ¡1 / 2™ (í/ë on theremote) to select your desired track number. The selected track number and PROG flash onthe display panel.

3 Press PROGRAM (PROG on the remotecontrol) to confirm the track number to bestored.

4 Repeat steps 2-3 to select and store all desiredtracks.

5 To start playback of your disc programme, press2;.

Note:– If you wish, you can add further tracks to yourcurrent program. Make sure you are in the STOPposition, and that you have not exceeded 20tracks.

Erasing the programmeYou can erase the programme by:

pressing STOP 9 once in the STOP mode; pressing STOP 9 twice during playback; opening the CD compartment; selecting another sound source

PROG disappears from the display.

Supported MP3 disc formats:– ISO9660, Joliet, UDF 1.5– Maximum title number: 511 (depending on

filename length)– Maximum album number: 99– Supported sampling frequencies: 32 kHz, 44.1

kHz, 48 kHz– Supported Bit-rates: 32~256 (kbps), variable

bitrates

Different play modes: SHUFFLEand REPEATYou can select and change the various playmodes before or during playback.

REPEAT ............plays the current trackcontinuously

REPEAT ALL ... repeats the entire disc/programme

SHUF ................ tracks of the entire disc areplayed in random order

SHUF and REPEAT ALL repeats the entiredisc/programme continuously inrandom order

1 To select your play mode, press SHUFFLE orREPEAT on the remote control before orduring playback until the display shows thedesired function.

2 Press 2; to start playback if in the STOPposition.

3 To return to normal playback, press SHUFFLEor REPEAT on the remote control until thevarious SHUFFLE/ REPEAT modes are no longerdisplayed.

You can also press STOP 9 to cancel your playmode.

pg001-pg020_FWM139_55_Eng 2006.5.23, 16:0613

14

En

glish

Radio Reception

Tuning to radio stations1 Adjust the source selector to select TUNER

source. is displayed.

2 Adjust the band selector to select your waveband: MW, FM (mono) or FMST (stereo).

3 Adjust the TUNING control knob to tune to a desired radio frequency.

Note:– The system is equipped with a built-in MWantenna and a fixed FM antenna. For optimal MWreception, adjust the position of the whole set untilthe strongest signal is found. For optimal FMreception, fully extend and adjust the position ofthe FM antenna until the strongest signal is found.

FWM139

pg001-pg020_FWM139_55_Eng 2006.5.23, 16:0614

En

glis

h

15

Tape Operation / Recording

General information onrecording

Recording is permissible insofar as copyright orother rights of third parties are not infringed.

For recording, use only NORMAL (IEC type I)tapes on which the tabs have not yet beenbroken. This deck is not suited for recording onMETAL (IEC IV) type tapes.

The best recording level is set automatically.Altering the VOLUME or DBB controls will notaffect the recording in progress.

The recording sound quality might differdepending on the quality of your recordingsource and the recording tape.

At the very beginning and end of the tape, norecording will take place during the 7 secondswhen the leader tape passes the recorder heads.

To protect a tape from accidental erasure, havethe tape in front of you and break out the lefttab. Recording on this side is no longer possible.If, however, you wish to record over this sideagain, cover the tabs with a piece of adhesivetape.

Synchro start CD recording1 Adjust the source selector to select CD source.

2 Insert a disc and if desired, programme tracknumbers.

3 Press STOP•OPENÇç to open the tapedoor.

4 Insert a suitable tape into the deck and close thetape door.

5 Press RECORD 0 to start recording. Playing of the CD programme startsautomatically from the beginning of the CDafter 7 seconds. It is not necessary to start theCD player separately.

Tape playback

1 Adjust the source selector to select TAPEsource. Display: shows TAPE throughout tapeoperation.

2 Press STOP•OPENÇç to open the tapedoor.

3 Insert a recorded tape and close the tape door.

Load the tape with the open side downwardand the full spool to the left.

4 Press PLAY 2 to start playback.5 To pause, press PAUSE Å. Press again to

resume.

6 Press REW à or F.FWD á to fast windtape in either direction.

7 To stop the tape, press STOP•OPENÇç.

Notes:– During playback, the keys are automaticallyreleased at the end of a tape. To switch off the set,press STANDBY-ON y (POWER y on theremote).– During fast forwarding/rewinding, the keys willnot be released at the end of a tape. To stop fastwinding, press STOP•OPEN 9/.

pg001-pg020_FWM139_55_Eng 2006.5.23, 16:0615

16

En

glish

Cleaning the Cabinet Use a soft cloth slightly moistened with a mild

detergent solution. Do not use a solutioncontaining alcohol, spirits, ammonia or abrasives.

Cleaning Discs When a disc becomes dirty,

clean it with a cleaning cloth.Wipe the disc from the centreout.

Do not use solvents such asbenzene, thinner, commerciallyavailable cleaners, or antistatic spray intendedfor analogue records.

Cleaning the disc lens After prolonged use, dir t or dust may

accumulate at the disc lens. To ensure goodplayback quality, clean the disc lens with PhilipsCD Lens Cleaner or any commercially availablecleaner. Follow the instructions supplied withcleaner.

Maintenance

Cleaning the Heads and the Tape Paths To ensure good recording and playback quality,

clean the heads A, the capstan(s) B, andpressure roller(s) C after every 50 hours oftape operation.

Use a cotton swab slightly moistened withcleaning fluid or alcohol.

You can also clean the heads by playing acleaning tape once.

A A B C

Demagnetising the heads Use a demagnetising tape available at your

dealer.

Tape Operation / Recording

To select and record a particular passagewithin a CD track:

Press and hold down on REW à or F.FWDá. Release the control when you recognize thepassage you want.

To interrupt CD playback press 2; . Recording starts from this exact point in the

track when you press RECORD 0.

6 To pause, press PAUSE Å. Press again toresume.

7 To stop recording, press STOP•OPENÇç.

Recording from the radio

1 Tune to the desired radio station (see Tuning toradio stations).

2 Press STOP•OPENÇç to open the tapedoor.

3 Insert a suitable tape into the deck and close thetape door.

4 Press RECORD 0 to start recording.

5 To pause, press PAUSE Å Press again toresume.

6 To stop recording, press STOP•OPENÇç.

pg001-pg020_FWM139_55_Eng 2006.5.23, 16:0616

En

glis

h

17

Clock/Timer

Setting the timer The system can be used as an alarm clock. CD

or TUNER can be set to switch on at a presettime. The clock time needs to be set first beforethe timer can be used.

If no button is pressed within 7 seconds duringtimer setup, the system will exit timer settingmode automatically.

1 In active mode, press and hold CLOCK/TIMER for more than 2 seconds.

2 Press TITILE-/+ ¡1 / 2™ (í/ë on theremote) to set the hours.

3 Press CLOCK/TIMER again. The clock digits for the minutes flash.

4 Press TITILE-/+ ¡1 / 2™ (í/ë on theremote)to set the minutes.

5 Press CLOCK/TIMER to confirm the time The timer is now set and actiated.

Activating and deactivatingTIMER

In standby or during playback, pressTIMER ON/OFF once. Display shows if activated, and disappears ifdeactivated.

Setting the clock1 In any mode, press CLOCK/TIMER twice.

The clock digits for the hours flash.

2 Press TITILE-/+ ¡1 / 2™ (í/ë on theremote) to set the hours.

3 Press CLOCK/TIMER again. The clock digits for the minutes flash.

4 Press TITILE-/+ ¡1 / 2™ (í/ë on theremote)to set the minutes.

5 Press CLOCK/TIMER to confirm the time.

Note:– If the clock has not been set, 0:00 will bedisplayed.

FWM139

pg001-pg020_FWM139_55_Eng 2006.5.23, 16:0617

18

En

glish

Clock/Timer

Activating and deactivatingSLEEP

The sleep timer enables the system to switch offby itself after a set period of time

Press SLEEP on the remote control repeatly toselect desired time beforesystem shuts off. Display shows SLEEP andseries of time options forselection:120, 90, 60, 45,30,15, OFF.

To deactivate, press SLEEP on the remote control once or more until ‘OFF’ is shown, or

press STANDBY-ON y (POWER y on theremote).

Specifications

AMPLIFIEROutput power ....................................... 2 x 20 W RMS.......................................................................... 800W PMPOSignal-to-noise ratio .......................... ≥ 62 dBA (IEC)Frequency response ......... 63 – 16000 Hz, ± 3 dBImpedance loudspeakers ......................................... 8 ΩImpedance headphones ................. 32 Ω – 1000 Ω

CD PLAYERFrequency range .................................. 63 – 16000 HzSignal-to-noise ratio ............................................ 65 dBA

TUNERFM wave range ................................... 87.5 – 108 MHzMW wave range ................................ 522 – 1710 kHz

TAPE DECKFrequency response

Normal tape (type I) ...... 125 – 8000 Hz (8 dB)Signal-to-noise ratio

Normal tape (type I) .................................... 35 dBAWow and flutter ......................................... ≤ 0.4% DIN

SPEAKERSBass reflex systemDimensions (w x h x d) . 190 x 292 x 182 (mm)

GENERAL INFORMATIONAC Power ............................ 110 – 127 / 220 – 240 V

....................................................... 50/60 Hz SwitchableDimensions (w x h x d) .. 220 x 292 x 285 (mm)Weight (with/without speakers) ................................................................................................. approx. 4.9 / 2.3 kg

Subject to modification

pg001-pg020_FWM139_55_Eng 2006.5.23, 16:0618

En

glis

h

19

Troubleshooting

WARNINGUnder no circumstances should you try to repair the system yourself, as this will invalidate thewarranty. Do not open the system as there is a risk of electric shock.

If a fault occurs, first check the points listed below before taking the system for repair. If youare unable to remedy a problem by following these hints, consult your dealer or service centre.

Problem Solution

CD OPERATION

“No disc” is displayed. – Insert a disc.– Check if the disc is inserted upside down.– Wait until the moisture condensation at the lens

has cleared.– Replace or clean the disc, see “Maintenance”.– Use a finalised CD-RW, CD-R or MP3 CD.

RADIO RECEPTION

Radio reception is poor. – Increase the distance between the Micro HiFiSystem and your TV or VCR.

TAPE OPERATION / RECORDING

Recording or playback cannot be made. – Clean deck parts, see “Maintenance”.– Use only normal (IEC I) tape for recording.– Apply a piece of adhesive tape over the missing

tab space.

GENERAL

The system does not react when buttons – Remove and reconnect the AC power plug andare pressed. switch on the system again.

Sound cannot be heard or is of poor – Adjust the volume.quality. – Disconnect the headphones.

– Check that the speakers are connected correctly.– Check if the stripped speaker wire is clamped.

The left and right sound outputs are – Check the speaker connections and location.reversed.

pg001-pg020_FWM139_55_Eng 2006.5.23, 16:0619

20

En

glish The remote control does not function – Reduce the distance between the remote controland the system.

– Insert the batteries with their polarities(+/– signs) aligned as indicated.

– Replace the batteries.– Point the remote control directly toward

IR sensor on the front of the system.

The timer is not working. – Set the clock correctly.– Press TIMER ON/OFF to switch on the timer.– If a recording is in progress, stop the recording.

The Clock/Timer setting is erased. – Power has been interrupted or the power cordhas been disconnected. Reset the clock/timer.

Troubleshooting

pg001-pg020_FWM139_55_Eng 2006.5.23, 16:0620