protección, monitorización y control para equipamientos de
Post on 04-Jul-2022
5 Views
Preview:
TRANSCRIPT
Protección, monitorización y control para equipamientos de baja tensión
GUÍA DE SELECCIÓN
Terasaki es fabricante de interruptores
automáticos para proteger a las personas y los
equipos contra defectos eléctricos.
Seguridad y protección son objetivos
fundamentales de todos nuestros productos.
Suministramos productos a instaladores,
cuadristas, constructores navales y fabricantes
de equipamiento (OEMs).
Somos líderes mundiales en el equipamiento
de cuadros eléctricos en el sector naval.
Terasaki tiene experiencia internacional y las
habilidades profesionales necesarias para
respaldar su negocio.
Telehouse, centro de proceso de datos (CPD). 199 unidades de ACBs TemPower2, 423 unidades de MCCBs TemBreak2.
Lider mundialen el sector naval
ÍNDICE
Terasaki, perfil de la Compañía 6
Interruptores de bastidor abierto (ACBs) 8
Guía de selección ACBs 9
Guía de selección relés de protección 10
Accesorios para interruptores de bastidor abierto 11
Retrofit 12
Concepto Retrofit 12
Servicios Retrofit 13
Monitorización y protección avanzadas 14
Dispositivo de monitorización y comunicación T2ED 14
Relé multi-protección TemTrip2 14
Relés de protección diferencial 14
Interruptores de caja moldeada (MCCBs) 15
Protección electrónica incluyendo tipos con monitorización y comunicación 16
Protecciones térmica y magnética ajustables 18
Serie TemBreak2 Lite 20
Interruptores con protección diferencial integrada (CBR) 21
Interruptores de caja moldeada para aplicaciones especiales 22
Accesorios para interruptores de caja moldeada 23
Automatismo de conmutación 24
Contactores y guardamotores 25
Guía de selección de contactores 3 polos 26
Guía de selección de contactores 4 polos 28
Protección modular DIN 30
Accesorios 30
Guía de selección de aparamenta modular de carril DIN 31
Interruptores seccionadores y conmutadores 32
Interruptores seccionadores y accesorios 32
Interruptores seccionadores para aplicaciones especiales y accesorios 32
Conmutadores y accesorios 32
Tablas de selectividad: caja moldeada / aparamenta modular 33
Canalización eléctrica prefabricada 34
Índice | 3
HISTORIA
Seguridad y fiabilidadElevado MTBF; bajo MTTR; monitorización de temperatura, doble circuito de control
Homologaciones ISO 9001; ISO 14001; OHSAS 18001; Lloyds; BV; GL; GOST; SABS; DEKRA (KEMA); ASTA; IEC 60947-2; IEC 61439; IEC 60898
Asistencia técnicaRetrofits; mantenimiento preventivo, gestión del ciclo de vida de los productos
Soluciones especiales de protecciónCC; PV; UPS; 1000V CA; Protección diferencial incorporada; 100kA y superiores
1933
1943
1963
1973
1983
1923
1923
1923
1963
1923
1970
1985
Terasaki Electric Works fue fundada en Konohana-ku, Osaka
¡PATENTADO! Desarrollado con éxito el primer interruptor limitador de corriente.
Establecimiento de nuestra primera filial fuera de Japón, en UK
1953
Satisfacemos las necesidades de nuestros clientes gracias a un completo sistema de desarrollo, diseño y fabricación basado en el “know-how” eléctrico, electrónico y de control que hemos acumulado durante décadas desde nuestra fundación.
Disponemos de sistemas de ensayos aprobados por DEKRA (antes KEMA) y de dos generadores en nuestras instalaciones para llevar a cabo los ensayos de desarrollo que sean necesarios.
Terasaki realiza productos optimizados mediante el desarrollo de software 3D CAD, diseño del molde y la chapa, diseño estructural y análisis de flujo de la resina.
CAPACIDADES
I+D+i
PRODUCTOS Y SERVICIOS
Int. de bastidor abierto (ACB)
Int. de caja moldeada (MCCB)
Aparamenta modular DIN
Controlador de conmutación automática
Contactores
Asistencia técnica
Retrofit
1983
1993
2013
2023
2013
2023
2007
90 años
100 años
2000
¡PATENTADO!Contactos dobles, bobinas de apertura dobles, bobinas de cierre dobles son exclusivos para el ACB TemPower2
¡PATENTADO! La protección diferencial es una función integrada en el CBR TemBreak2 -el primero en el mundo en cumplir con la Norma IEC 60947-2, Anexo B
¡PATENTADO!El relé TemTrip fue el primero en ofrecer una verdadera protección RMS
2003
Desde un punto de vista medioambiental, es beneficioso instalar productos con una larga esperanza de vida útil. Si instala un interruptor Terasaki puede esperar que se mantenga operativo durante un elevado número de maniobras eléctricas y mecánicas.
El diseño modular de nuestros interruptores Terasaki permite desmontar fácilmente componentes y accesorios y deshacerse de ellos por separado. Las piezas moldeadas de los MCCBs no contienen ninguna parte metálica integrada y están claramente marcadas para facilitar su futura identificación y un reciclaje sencillo.
Los componentes de bajo peso y volumen facilitan la vida a los usuarios, pero un elevado rendimiento de productos más pequeños significa también utilización de menos material y producción de menos residuos.
SOSTENIBILIDADEnvolventes
PERFIL TERASAKI
Sr. Masakazu Fujita Presidente del Consejo
Sr. Taizo Terasaki Presidente
Sr. Yasuhiko Terasaki Último presidente
Sr. Yasutaro Terasaki Fundador de la compañía
“Queremos satisfacer las necesidades de más
clientes de todo el mundo con nuestros interruptores y
servicio postventa” Taizo Terasaki, Presidente
ENERGÍA NUCLEAR: Ringhals, Suecia
ENERGÍA SOLAR: Sur de Italia
PLANTA DESALADORA: España
NAVAL: Petrolero “Belokamenka”Rusia
MINERÍA: BHP Billiton,Australia
FUNDICIÓN DE ALUMINIO: ALBA, Bahrain
PRODUCCIÓN DE PETRÓLEO: Isla de Sajalín, Rusia
CENTRO DE PROCESO DE DATOS (CPD): Telehouse / Londres, UK
AUTOMOCIÓN: Planta producciónToyota, Argentina
6 | Perfil Terasaki
Fundación:1 de octubre de 1923
Constitución:1 de abril de 1980
Capital:1.236.640 miles de JPY
Presidente:Taizo Terasaki
Número de empleados:1776
Ventas netas:36.880 millones de JPY
Filiales:5 nacionales (Japón) y 8 extranjeras
Compañías afiliadas:2 nacionales
Cotizaciones:Bolsa de Tokio (Jasdaq)
[Código 6637]
El servicio de mantenimiento preventivo de Terasaki está diseñado para garantizar la integridad del suministro eléctrico. Confeccionaremos un programa basado en la estructura de SU sistema eléctrico. Podemos ofrecerle los servicios siguientes para aparamenta en instalaciones industriales y comerciales:
La escala y estructura de nuestra empresa permiten a nuestros
clientes, cuando así lo requieren, trabajar conjuntamente con los
responsables de cada área. Ofrecemos proximidad y sólida experiencia técnica; de estas cualidades queremos que se
beneficien nuestros clientes. Para ello, analizamos su operativa,
identificamos sus necesidades y ofrecemos soluciones completas
e individualizadas.
Somos un partner honesto y eficiente. Nuestro objetivo es
añadir valor duradero a las actividades de su empresa.
Nuestro servicio y la rapidez en la entrega son dos de
nuestros puntos fuertes más valorados por nuestros clientes.
No en vano hemos dedicado recursos a constituir un estoc de
productos que nos permite entregar de media el 95,77% de los
artículos en la fecha comprometida con el cliente.
DIRECT RESPONSE SERVICE DIVISION
Perfil Terasaki | 7
• ANÁLISIS DE SELECTIVIDAD
• DIAGNÓSTICO DE FALLO
• ENSAYOS DUCTOR
• REVISIONES Y MANTENIMIENTO DE CUADROS
• MANTENIMIENTO PREVENTIVO
• SOLUCIONES PARA LA REDUCCIÓN DEL ARCO EN BAJA TENSIÓN
• GESTIÓN Y SUMINISTRO DE RECAMBIOS
• MANTENIMIENTO Y REPARACIÓN DE INTERRUPTORES
• RETROFIT (VEA PÁGINAS 12-13)
PERFIL TERASAKI
Nuestra experiencia global (en fabricación y comercialización) nos capacita para ofrecerle una
combinación única de atención personal, experiencia internacional y asistencia local.
Interruptores de bastidor abierto (ACBs)
5 razones para utilizar ACBs TemPower2
1. ACBs de altas prestaciones de 5000A y 6300A patentados Nuestros ACBs interrumpen la intensidad en dos puntos del lado línea mientras disipan calor de los contactos o terminales por una eficiente convección del aire, mediante el uso de la válvula de presión.
2 Doble bobina de apertura y cierre Proporciona un sistema de control exhaustivo y redundante sobre el interruptor de corte al aire. La doble bobina permite implementar circuitos de apertura y cierre de reserva. Proporciona al usuario final máxima fiabilidad en circuitos UPS críticos conectados a cargas críticas.
3. Sistema de doble apertura de contactos para una rápida desconexión El sistema único de apertura de contactos por fase, asegura la rápida interrupción de la corriente de cortocircuito, reduciendo así el desgaste de los contactos principales. La estructura simétrica interna del mecanismo de “doble apertura” permite al contacto móvil estar aislado de la tensión de alimentación, incluso cuando el interruptor está conectado de manera inversa. Los ACBs TemPower2 hasta 4000A utilizan la tecnología de “doble apertura”.
4. Fácil mantenimiento El diseño excepcional del interruptor TemPower2 incorpora pinzas de conexión y contactos principales montados en el propio interruptor, permitiendo un mantenimiento rápido y seguro de las principales partes activas, con el interruptor instalado.
5. Sustitución de contactos principales* Los contactos fijo y móvil pueden ser fácilmente sustituidos in situ, lo que prolonga así la vida útil del interruptor. El cambio lleva unos 15 minutos por polo.
*No disponible en el AR6.
Eficiente convección del aire mediante una válvula de presión
REFERENCIA DE CLIENTE
“El rendimiento de los ACBs Terasaki quedó probado sobre el terreno cuando falló el sistema de barras principal de la sala de control. El ACB fue cerrado en el fallo por cortocircuito dos veces durante el diagnóstico de fallos y está todavía en funcionamiento después de una intervención por parte de Terasaki.”
Andy Oswald, BAA (Compañía operadora aeropuerto, Reino Unido)
Válvula de presión
8 | Interruptores de bastidor abierto
Guía de Selección interruptores de bastidor abierto
Tamaño Unidad Parámetros AR2 AR3 AR6Modelo AR208, AR212,
AR216AR208, AR212, AR216, AR220
AR212, AR216, AR220
AR325, AR332
AR316, AR320, AR325, AR332
AR440 AR650, AR663
Tipo D S H S H SB S, HPolos 3, 4 3, 4 3, 4 3, 4 3, 4 3, 4 3, 4In - Corriente asignada (A) In A 800,1000,1250,
1600800,1000,1250, 1600,2000
1250,1600, 2000
2500,3200 1600, 2000, 2500, 3200
4000 5000,6300
Características eléctricasTensión asignada de servicio Ue V 690 690 690 690 690 690 690
Tensión asignada de aislamiento
Ui V 1000 1000 1000 1000 1000 1000 1000
Tensión asignada de resistencia a la onda de choque
Uimp kV 12 12 12 12 12 12 12
Icu Poder asignado de corte último en cortocircuito
Icu kA 690V CA 422 502 55 652 85 852 852
440V CA 50 65 80 85 100 100 120400/415V CA 50 65 80 85 100 100 120250V CC1 40 40 40 40 40 40 40
Ics Poder asignado de corte de servicio en cortocircuito
Ics kA 690V CA 322 502 55 652 85 852 852
440V CA 36 65 80 85 100 100 120400/415V CA 36 65 80 85 100 100 120250V CC1 40 40 40 40 40 40 40
Icm Poder asignado de cierre en cortocircuito
Icm kA 690V CA 882 1052 121 143 187 1872 1872
440V CA 105 143 176 187 220 220 264400/415V CA 105 143 176 187 220 220 264
Icw Corriente asig. de corta duración admisible
Icw kA 1 segundo 50 65 80 85 100 100 1203 segundos 36 50 55 65 75 75 85
Tiempo total de apertura máximo
segundos 0.03 0.03 0.03 0.03 0.03 0.03 0.05
Tiempo de carga de muelles máximo
segundos 10 10 10 10 10 10 10
Tiempo máximo de cierre segundos 0.08 0.08 0.08 0.08 0.08 0.08 0.08Categoría de utilización B B B B B B BDimensionesTipo fijo Alto mm 460 460 460 460 460 – –
Ancho mm 3 polos 360 360 360 466 466 – –Ancho mm 4 polos 445 445 445 586 586 – –Fondo mm 290 290 290 290 290 – –Peso kg 3 polos 53 54 54 80 80Peso kg 4 polos 59 60 60 92 92
Tipo extraíble Alto mm 460 460 460 460 460 460 460Ancho mm 3 polos 354 354 354 460 460 460 799Ancho mm 4 polos 439 439 439 580 580 580 1034Fondo mm 345 345 345 345 345 345 380Peso kg 3 polos
extraíble73 79 79 105 105 126 200
Peso kg 4 polos extraíble
86 94 94 125 125 158 285
Endurancia (número de ciclos) Mecánica Ciclos Con
mantenimiento26000 30000 30000 20000 20000 15000 10000
Mecánica Ciclos Sin mantenimiento
12500 15000 15000 10000 10000 8000 5000
Eléctrica Ciclos Sin mantenimiento a 440V CA
11000 12000 12000 7000 7000 3000 1000
Eléctrica Ciclos Con mantenimiento a 440V CA
26000 30000 30000 20000 20000 15000 10000
Notas:1. Disponemos de versiones especiales para uso a 600V CC, 800V CC, 800V CA, 1000V CA y 1150V CA. Póngase en contacto con nosotros para ampliar la información.2. No aplicable en sistemas sin toma de tierra (IT).3. AR220S Endurancia mecánica: con mantenimiento - 25000 sin matenimiento - 12000 Endurancia eléctrica: con mantenimiento - 25000 sin mantenimiento - 10000
TemPower 2 ACB
Interruptores de bastidor abierto | 9
Guía relé de protección
ACBs TemPower2 para 800V, 1000V y 1150V CAEn CA las tensiones elevadas se utilizan para minimizar el coste de cableado en aquellas instalaciones en las que son necesarias grandes longitudes de cable. Terasaki suministra ACBs para extensas granjas solares, minas y ferrocarril. Las últimas incorporaciones a nuestra gama son los interruptores AR316H-V8, AR320H-V8, AR325H-VS y AR332H-V8, todos ellos capaces de interrumpir 30kA a 800V CA.
Funciones de protección Ajuste por dialL – retardo largoS – retardo corto I – instantáneo
Funciones de protección opcionales Protección de defecto a tierraProtección de neutro
Reinicio manual Opcional AGR-11BL-AS,AGR-11BL-GS
AGR-11B
Funciones de protección Amperímetro LCDL – retardo largo S – retardo cortoI – instantáneoAlarma previa al disparo (para deslastre de cargas no esenciales)Indicación de disparo
Funciones de protección opcionales Protección de defecto a tierra (lado línea o lado carga)Protección de neutroComunicaciónProtección de rotación de faseCurvas protección de generadoresCurvas de protección flexibles IDMT Comprobación funciones
AGR-21B
Funciones de protección Analizador de potencia retroiluminadoL – retardo largo S – retardo cortoI – instantáneoAlarma previa al disparo (para deslastre de cargas no esenciales)Indicación de disparoMonitorización de armónicos Historial de eventosCapacidad de ajuste dual
Funciones de protección opcionales Protección de defecto a tierra (lado línea o lado carga)Protección de neutroPotencia inversaZona de enclavamientoMonitorización temperatura contactos 3CComunicaciónProtección fase inversaProtección diferencialCurvas protección de generadoresCurvas de protección flexibles IDMT Comprobación funcionesAlarma mínima/sobre tensiónFrecuencia mínima/máxima
AGR-31B
10 | Interruptores de bastidor abierto
Versiones no automáticas (interruptores seccionadores) sin protección están disponibles para todos los calibres.
* Estas características son ahora estándar en AGR-31B y en AGR-31B H
TemPower2 AR332H-V8 ACB
*
Accesorios ACBs
Interruptores de bastidor abierto | 11
Contactos de posición
Contador de ciclos ON/OFF
Tapa transparente de protección IP55
Bobina de mínima tensión
Bobina de emisión con condensador 48V CC
Bobina de emisiónBobina de cierre
Tapa de protección del chasis IP3XAsas de extracción y transporte
Bornes de fijación(para interruptores extraíbles)
Dispositivo de extracción especial
Cargador elevador Comprobador de relés OCR Puente de test Transformador reductor 440V a 220V
Enclavamiento mecánico horizontal, verticalBloqueo por llave, especial (Castell)
Dispositivo de auto-descarga de muelles
Separadores de polos
Contacto indicación disparoContacto indicación carga de muelles
Mando motor
Tratamientos de tropicalización, anticorrosión, climas fríos
Marco embellecedor IP31
Contactos auxiliares
Concepto Retrofit Servicios Retrofit
El retrofit se basa en la incorporación de nueva tecnología a sistemas antiguos. Los ACBs de retrofit pueden sustituir interruptores y disyuntores envejecidos e inseguros.
5 razones fundamentales para usar Retrofit
1. Mejorar seguridad y funcionalidad Los interruptores modernos ofrecen enclavamientos más seguros, conexión remota y monitorización de circuitos.
2 Optimizar una planta existente Los componentes estáticos de un cuadro (estructura de acero y embarrados) se pueden mantener. Sólo se sustituyen las piezas funcionales móviles (los interruptores). El retrofit es alrededor de un 80% más económico que la sustitución del cuadro y comporta un mínimo tiempo de inactividad.
3. Garantizar la disponibilidad de recambios Terasaki garantiza disponibilidad de recambios durante como mínimo 10 años desde la retirada del interruptor de la venta.
4. Modernizar el sistema de protección Los antiguos relés de protección pueden ser retirados y sustituidos por la protección de modernos microprocesadores integrados en el ACB. Ello facilita la comunicación entre el ACB y los PLCs mediante Modbus.
5. Reducir el riesgo de arco eléctrico Los modernos ACBs reducen los cortocircuitos de una forma mucho más rápida que los tipos antiguos, lo que significa que la incidencia del arco eléctrico será en correspondencia muy inferior.
Servicios Retrofit TerasakiPreferimos realizar una inspección in situ para cada proyecto de retrofit, incluso si el interruptor a sustituir ya está en nuestra base de datos de diseño. Así nos aseguramos de que la instalación será lo más ágil posible, con el mínimo trastorno para la aplicación del cliente.
Las conexiones mecánicas y eléctricas son diseñadas con sistemas 3D-CAD de última generación.
Podemos preparar las conexiones de acoplamiento de las pletinas al cuadro para que el ensayo de cortocircuito se pueda realizar de forma independiente. Esto garantiza al cliente que la capacidad de defecto de los interruptores y las conexiones de retrofit igualarán o superarán aquella del sistema original.
La fabricación, montaje y ensayos de rutina se llevan a cabo en las instalaciones de Terasaki en Glasgow, Escocia. La fábrica, así como los procesos, están certificados de acuerdo a los estándares de gestión de calidad de la Norma ISO 9001.
Algunos de nuestros diseños de retrofit pueden ser instalados sin parada. En aquellos casos en los que esto no sea posible, nuestro equipo se asegurará de minimizar la incidencia.
12 | Retrofit
Diseñamos Retrofit ACBs bajo demanda. Si está interesado en una marca que no figura a continuación, estaremos encantados de estudiarlo. Añadimos nuevos diseños a nuestra cartera constantemente. Vea relación actualizada en la web de Terasaki: www.terasaki.co.uk
• Terasaki
• Ellison
• GEC
• Merlin Gerin
• Siemens
• Unelec
• Square D
• Schneider
• Mitsubishi
• Sace
• ABB
• Hyundai
• AEG
• English Electric
• MEM
• Klockner Moeller
• GE Electric
Reducción del riesgo de arco eléctrico en Baja Tensión1. Interrupción remota mediante el cable controlador umbilical.
2. Una apertura más rápida reduce el riesgo de la energía del arco. El ACB TemPower2 puede ajustarse para abrir un cortocircuito en menos de 30 milisegundos (un mínimo de dos veces más rápido que el mecanismo al que sustituirá).
DISEÑOS VERIFICADOSInforme técnico de entidades externas.
Ensayados según norma vigenteEnsayos ASTA de acuerdo con la IEC 61439 para resistencia al cortocircuito (Icw)De conformidad con BS 6423GEC MPactEllisonEnglish Electric
Moderna protecciónEl relé de protección AGR puede reemplazar las funciones de diversos mecanismos del cuadro existente, proporcionando:
• protección diferencial restringida
• protección contra sobrecargas
• comunicación de datos según BMS o SCADA
• control por PLC
Concepto Retrofit
El interruptor principal de la sede central del Royal Bank of Canada en el Reino Unido, en Londres, disparaba intempestivamente y los ingenieros empezaron a preocuparse de que pudiera producirse un repentino y completo fallo eléctrico. El aparato defectuoso, un ACB Merlin Gerin DA 4000, era obsoleto e irreparable. Otros 26 ACBs Selpact y DA 4000 en el cuadro eléctrico también eran obsoletos.
Los ingenieros sólo tenían autorización para desconectar la fuente principal de alimentación durante un fin de semana –tiempo insuficiente para sustituir el cuadro o para realizar cualquier modificación en el embarrado.
La división Direct Response Service de Terasaki tenía lo que el cliente necesitaba: una solución de retrofit. Los ACBs de retrofit Terasaki TemPower 2 fueron diseñados para adaptarse exactamente a las conexiones y fijaciones de los ACBs instalados. No había ninguna necesidad de modificar el cuadro eléctrico y los 27 ACBs fueron sustituidos rápidamente y de forma segura.
Retrofit | 13
Servicios Retrofit
Cliente:Royal Bank of Canada
Proyecto:Retrofit
Ubicación:71 Queen Victoria Street, Londres
Tipo de Retrofit:De 24 Merlin Gerin Selpact 1000A a TemPower 2De 3 Merlin Gerin DA 4000 4000A a TemPower 2
Alcance:• 27 interruptores sustituidos por retrofit ACBs
TemPower 2• Sólo un fin de semana de parada• Sin alteración del cuadro eléctrico ni del
embarrado• Seguridad y rapidez
“¡Tenemos lo que Ud. necesita!”- Terasaki Electric (Europe) Ltd
• Merlin Gerin DA 4000 x 3• Merlin Gerin Selpact x 24• Edificio desconectado: 10:00h viernes• Instalados 27 retrofit ACBs Terasaki TemPower 2 • Edificio re-conectado 12:00h domingo
Ingeniero de Direct Response instalando ACB de Retrofit
Proyecto de Referencia Retrofit Terasaki
Detalles del Retrofit
SUSTITUCIÓN DE 27 ACBs MERLIN GERINPOR ACBs TERASAKI
ACB DA 4000: Acceso restringido debido a disparos intempestivos
ACBs Merlin Gerin Selpact obsoletos
Concepto RetrofitOtros servicios
Política de recambios(interruptores) Ampliación de garantía
Terasaki garantiza la disponibilidad de piezas de recambio para los interruptores durante un mínimo de 10 años después de que el interruptor haya sido retirado de la venta. Más allá de ese plazo nuestra Direct Response Service Division continuará ofreciendo soporte a los viejos interruptores llevando a cabo mantenimientos de rutina sobre el terreno y reparaciones in situ.
Nuestra Direct Response Service Division puede proporcionar una lista de recambios recomendados, basada en la especificación de todos los interruptores en la instalación. Normalmente, sugerimos una combinación de recambios “completos” y “componentes”.
Terasaki ofrece una garantía estándar de un año para nuestros interruptores. No obstante, usted puede ampliar la garantía a 4 o 5 años dependiendo de los requerimientos del proyecto.
Dirección 1 Dirección 2 Dirección 3 Dirección 127
T2ED
Monitorización y protección avanzadas
Funciones especiales:Visualización de los valores del circuito e información de los
interruptores desde el exterior.
• Sencilla conexión directa interruptor-T2ED (no es necesario módulo
de comunicación)
• Fácil conexión directa T2ED-Modbus (no es necesario módulo de
comunicación)
• Visualizaciones analógica, numérica y de gráfico de barras
Características técnicas:• Tensión nominal: 24V CC (rango de tensión aplicable:
de 18V CC a 31V CC)
• Consumo (a 24V CC): 50mA
• Dimensiones: 96 x 96 x 50 mm
• Interfaz de serie: RS485
• Protocolo: Modbus-RTU
• Método de transmisión: 2 hilos semidúplex
Monitorización y comunicación: T2ED
T2ED es el nuevo monitor externo Terasaki para los interruptores de bastidor abierto (ACBs) TemPower2 y de caja moldeada (MCCBs) TemBreak2. Muestra mediciones en el circuito e información sobre el interruptor instalado de forma clara y sencilla. El T2ED puede ser utilizado como un dispositivo local independiente. Está preparado también para transferir toda esta información directamente a una red Modbus.
Red local / Puerta de enlace
14 | Monitorización y protección avanzadas
Relé multi-protección TemTrip2TemTrip2 es un relé multi-protección para interruptores de media o baja tensión, que es capaz de indicar mediante LEDs que la corriente de carga es recogida o que el interruptor ha abierto, mostrando en la pantalla información del tipo: corriente de fase, tensión de red y corriente de defecto.
El relé está disponible en tres modalidades distintas: para protección de generador, para protección de circuito de alimentación y para protección de transformador.
Relés de protección diferencialLos dispositivos de monitorización y control TemProtect de Terasaki proporcionan protección y monitorización diferencial para la mayoría de aplicaciones industriales y comerciales. Se utilizan para controlar corrientes de defecto a tierra para proteger personas y equipos eléctricos ante peligros tales como descargas eléctricas.
TemProtect ha sido diseñado para ser lo más flexible posible para que pueda adaptarse a una amplia gama de aplicaciones. La gama incluye versiones a carril DIN, a panel o base de montaje, relés adecuados para su uso en sistemas de CA (no afectada por los componentes de CC que puedan estar presentes).
Todos los relés cumplen con las Normas internacionales, incluida la IEC 60255.
• Corriente de disparo ajustable y configuración del tiempo de retardo• Dispositivo de rearme manual o automático seleccionable • Configuración multiplicador tiempo/corriente ajustable
• Pulsador de prueba• LED de indicación del estado de las unidades
ELR-1E ELRC-1 ELR-3C CTM
Empotrado DIN (a panel) Unidad 96x96x60mm
Relé con transformador toroidal integrado Ahorro de espacio
Montado sobre rail DIN (Norma DIN 43880) Tres módulos 17,5 mm ancho
Transformador toroidalPermite detectar las corrientes de fuga
• Multi-protección• Detección fallo a tierra vía tensión fase cero• Detección fallo a tierra direccional
• Ratio característica diferencial• Disparo potencia inversa• Lectura de causas de disparo/alarma
• Reloj interno• Auto-diagnóstico
Interruptores automáticos de caja moldeada (MCCBs)
1. Versiones electrónicas con funciones incorporadas de monitorización y comunicación Envío de datos a monitor integrado, monitor externo y red Modbus simultáneamente
2 Interruptor de 1000A más pequeño Mide sólo 273 mm de alto por 210 mm de ancho –igual tamaño que el MCCB de 800A.
3. Rendimiento superior ante temperatura Le ofrecemos MCCBs para su uso hasta 50°C sin disminución de su rendimiento, desde 20A hasta 1600A.
4. Interruptores con protección diferencial incorporada (CBRs) [vea página 21] Ofrecemos protección incorporada contra defecto a tierra, sobreintensidades y cortocircuitos en un solo aparato.
5. Apertura directa El robusto mecanismo asegura que la fuerza que se aplica al mando se transmite directamente a los contactos. La apertura directa es una recomendación de la IEC 60204-1, Seguridad de la maquinaria: equipamiento eléctrico de maquinaria.
5 razones para utilizar MCCBs TemBreak2
*Vea T2ED en página 14
Anterior MCCB 1000A
Nuevo MCCB1000A
Interruptores automáticos de caja moldeada | 15
REFERENCIA DE CLIENTE
“Terasaki Electric ha suministrado (a
través de los proveedores de aparamenta
seleccionados) los interruptores para
numerosos proyectos de elevada exigencia
que hemos diseñado.
Siempre ha brindado un excelente apoyo
a nuestros proyectos y por nuestra parte
les consideramos una excelente empresa
a la que asociarse para el suministro de
componentes; los productos elegidos
brindaron la solución ideal a nuestros
entornos críticos.
No tenemos ninguna duda en incluir los
aparatos de Terasaki Electric en nuestros
proyectos”.
Karl Luck, WSP (empresa consultora de ingeniería, Reino Unido)• Pulsador de prueba
• LED de indicación del estado de las unidades
• Reloj interno• Auto-diagnóstico
Protección electrónica, incluye tipos con monitorización y comunicación
Referencia calibre Parámetros Unidad Cond. empleo TB2 S/H/L 250Modelo S250 S250 S250 H250Tipo NE GE PE NENúmero de polos 3,4 3,4 3,4 3,4Corriente asignada In (A) 50°C 40,125,160,250 40,125,160,250 40,125,160, 250 40,125,160, 250Monitorización y comunicación l l l lCaracterísticas eléctricasTensión asignada de empleo Ue (V) CA 50/60 HZ 690 690 690 690 Tensión asignada de aislamiento Ui (V) 800 800 800 800Tensión asignada de resistencia a la onda de choque
Uimp (kV) 8 8 8 8
Poder asignado de corte último en cortocircuito (IEC, JIS, AS/NZS)
Icu (kA) 690V CA 525V CA 440V CA 400/415V CA 220/240V CA
7.5 25 253665
7.5 25 506585
20 35 50 70 125
20 45 120 125 150
Poder asignado de corte de servicio en cortocircuito (IEC, JIS, AS/NZS)
Ics (kA) 690V CA 525V CA 440V CA 400/415V CA220/240V CA
7.5 25 253665
7.5 25 253685
15 35 50 70 125
15 45 80 85 150
Poder de corte nominal (NEMA) (kA) 480V CA 240V CA
25 65
25 65
35 125
45 150
Corriente asignada de corta duración admisible
Icw (kA) 0,3 seg – – – –
Categoría de utilización A A A ADimensiones
Alto (mm) 165 165 165 165Ancho (mm) 3 polos 105 105 105 105
4 polos 140 140 140 140Fondo (mm) 103 103 103 103Peso (kg) 3 polos 2.5 2.5 2.5 2.5
4 polos 3.3 3.3 3.3 3.3ManiobraEndurancia Eléctrica ciclos 415V CA 10,000
Mecánica ciclos 30,000
Referencia calibre Parámetros Unidad Cond. empleo TB2 H/L 800 TB2 1000Modelo H800 L800 S800 S800 S1000 S1000
Tipo NE NE NE RE SE NE
Número de polos 3,4 3,4 3,4 3,4 3,4 3,4
Corriente asignada In (A) 50°C 630,800 630,800 630,800 630,800 10008 10008
Monitorización y comunicación l l l l l lCaracterísticas eléctricasTensión asignada de empleo Ue (V) CA 50/60 HZ 690 690 690 690 690 690Tensión asignada de aislamiento Ui (V) 800 800 800 800 800 800Tensión asignada de resistencia a la onda de choque
Uimp (kV) 8 8 8 8 8 8
Poder asignado de corte último en cortocircuito (IEC, JIS, AS/NZS)
Icu (kA) 690V CA 525V CA 440V CA 400/415V CA 220/240V CA
251 40 125125150
251 45 180200200
201 30 50 50 85
251 35 65 70 100
201 30 455085
251 45 65 70 100
Poder asignado de corte de servicio en cortocircuito (IEC, JIS, AS/NZS)
Ics (kA) 690V CA 525V CA 440V CA 400/415V CA220/240V CA
201 34 9494150
201 34 135150150
201 30 50 50 85
201 30 50 50 75
151 23 34 38 65
201 34 50 50 75
Poder de corte nominal (NEMA) (kA) 480V CA 240V CA
40 150
45 200
30 85
35 100
30 85
45 100
Corriente asignada de corta duración admisible
Icw (kA) 0,3 seg 10 10 10 10 – –
Categoría de utilización B B B B A ADimensiones
Alto (mm) 273 273 273 273 273 273Ancho (mm) 3 polos 210 210 210 210 210 210
4 polos 280 280 280 280 280 280Fondo (mm) 140 140 103 103 103 103Peso (kg) 3 polos 6 6 4 4 11.0 11.0
4 polos 7 7 5 5 14.8 14.8ManiobraEndurancia Eléctrica ciclos 415V CA 4,000 4,000
Mecánica ciclos 10,000 10,000– No disponible • Opcional 1 No se puede utilizar el MCCB en sistemas IT a esta tensión 2100KA a 400V 375KA a 400V 48,7kg 630A, 9,1kg 800A 511,9kg 630A, 12,3kg 800A 613,3kg 630A, 14,8kg 800A 716,8kg 630A, 18,8kg 800A 8Consultar rango de temperatura con Terasaki
Características eléctricas según IEC 60947-2, EN 60947-2, JIS C 8201-2-1 ANN.1, AS/NZS 3947-2, NEMA AB-1
16 | Interruptores automáticos de caja moldeada
TB2 H/L 400 TB2 E/S 630H400 L400 S400 S400 S400 E630 S630 S630NE NE NE GE PE NE CE GE3,4 3,4 3,4 3,4 3,4 3,4 3,4 3,4250, 400 250, 400 250,400 250,400 250,400 630 630 630
l l l l l l l l
690 690 690 690 690 690 1 690 1 690 1
800 800 800 800 800 800 800 8008 8 8 8 8 8 8 8
35 45 120125150
50 65 180200200
20 30 455085
20 30 6570100
20 30 80 85 100
10 1 15 253650
20 1 30 455085
20 1 30 6570100
35 45 8085150
50 65 135150150
15 30 455085
15 30 505085
15 30 80 85 85
10 1 15 25 36 50
15 1 30 455085
15 1 30 50 50 85
45 150
65 200
25 85
30 100
30 100
15 50
25 85
30 100
5 5 5 5 5 – – –
B B B B B A A A
260 260 260 260 260 260 260 260140 140 140 140 140 140 140 140185 185 185 185 185 185 185 185140 140 103 103 103 103 103 1037.1 7.1 4.3 4.3 4.3 5.0 5.0 5.09.4 9.4 5.7 5.7 5.7 6.5 6.5 6.5
4,500 4,50015,000 15,000
TB2 1250 TB2 1600 TB1 2000S1250 S1250 S1250 S1600 S1600 XS2000SE NE GE SE NE NE3,4 3,4 3,4 3,4 3,4 3,4800-1250 800-1250 800-1250 1250-1600 1250-1600 2000– – – – – –
690 690 690 690 690 690800 800 800 800 800 6908 8 8 8 8 8
201 30 45 50 85
251 45 6570100
451 65 85100/852
125
201 30 455085
451 65 85100/852
125
451 651 85100/85125
151 23 343865
201 34 505075
341 50 6575/653
94
151 23 343865
341 50 6575/653
94
421 491 6475/6494
30 85
45 100
65 125
30 85
65 125
15 15 15 20 20 42
B B B B B B
370 370 370 370 370 450210 210 210 210 210 320280 280 280 280 280 429120 120 120 140 140 18519.8 19.8 19.8 27.0 27.0 5425.0 25.0 25.0 35.0 35.0 67
4,000 2,000 5005,000 5,000 2,500
– No disponible • Opcional 1 No se puede utilizar el MCCB en sistemas IT a esta tensión 2100KA a 400V 375KA a 400V 48,7kg 630A, 9,1kg 800A 511,9kg 630A, 12,3kg 800A 613,3kg 630A, 14,8kg 800A 716,8kg 630A, 18,8kg 800A 8Consultar rango de temperatura con Terasaki
Interruptores automáticos de caja moldeada | 17
Disp
onem
os de
MCC
Bs ha
sta 32
00A.
Cons
ulte c
on Te
rasa
ki
Protección electrónica contra sobrecargas ajustable del 40% al
100% de la intensidad nominal en todos los modelos TemBreak2.
Protecciones térmica y magnética ajustables
Referencia calibre Parámetros Unidad Cond. empleo TB2 S125 TB2 S250Modelo S125 S125 S160 S160Tipo NJ GJ NJ GJNúmero de polos 3,4 3,4 3,4 3,4Corriente asignada In (A) 50°C 20,32,50,63,100,125 20,32,50,63,100,125 20,32,50,63,100,125,160 50,63,100,125,160Características eléctricasTensión asignada de empleo Ue (V) CA 50/60 Hz
CC690 250
690 250
690 250
690 250
Tensión asignada de aislamiento Ui (V) 800 800 800 800Tensión asignada de resistencia a la onda de choque
Uimp (kV) 8 8 8 8
Poder asignado de corte último en cortocircuito (IEC, JIS, AS/NZS)
Icu (kA) 690V CA 525V CA 440V CA 400/415V CA 220/240V CA 250V CC
6 22 253650 25
6 25 506585 40
7.5 (5*) 25(18*) 25(18*)36 (30*)65 (42*) 40 (30*)
7.5 25 506585 40
Poder asignado de corte de servicio en cortocircuito (IEC, JIS, AS/NZS)
Ics (kA) 690V CA 525V CA 440V CA 400/415V CA220/240V CA 250V CC
6 22 2536/3050 19
6 22 2536/3385 40
7.5 (5*) 25(18*) 25(18*)36 (25*)65 (35*) 40 (25*)
7.5 25 253685 40
Poder de corte nominal (NEMA) (kA) 480V CA 240V CA
22 50
25 85
22(18*) 65(42*)
25 85
Categoría de utilización A A A ADimensiones
Alto (mm) 155 155 165 165Ancho (mm) 3 polos 90 90 105 105
4 polos 120 120 140 140Fondo (mm) 68 68 68 68Peso (kg) 3 polos 1.1 1.1 1.5 1.5
4 polos 1.4 1.4 1.9 1.9ManiobraEndurancia Eléctrica ciclos 415V CA 30,000 20,000
Mecánica ciclos 30,000 30,000
Referencia calibre Parámetros Unidad Cond. empleo TB2 S/H/L 250 TB2 E/S 630Modelo S250 H250 L250 E400 S400Tipo RJ NJ NJ NJ CJNúmero de polos 3,4 3,4 3,4 3,4 3,4Corriente asignada In (A) 50°C 160,250 160,250 160,250 250,400 250,400Características eléctricasTensión asignada de empleo Ue (V) CA 50/60 Hz
CC690 250
690 250
690 250
525 250
690 250
Tensión asignada de aislamiento Ui (V) 800 800 800 800 800Tensión asignada de resistencia a la onda de choque
Uimp (kV) 8 8 8 8 8
Poder asignado de corte último en cortocircuito (IEC, JIS, AS/NZS)
Icu (kA) 690V CA 525V CA 440V CA 400/415V CA220/240V CA 250V CC
20 35 6565100 40
20 45 120125150 40
25 65 180200200 40
– 15 222535 25
15 22 303650 40
Poder asignado de corte de servicio en cortocircuito (IEC, JIS, AS/NZS)
Ics (kA) 690V CA 525V CA 440V CA 400/415V CA220/240V CA 250V CC
15 35 6565100 40
15 45 8085150 40
20 65 135150150 40
– 15 222535 19
15 22 303650 40
Poder de corte nominal (NEMA) (kA) 480V CA 240V CA
35 100
45 150
65 200
15 35
22 50
Categoría de utilización A A A A ADimensiones
Alto (mm) 165 165 165 260 260Ancho (mm) 3 polos 105 105 105 140 140
4 polos 140 140 140 185 185Fondo (mm) 103 103 103 103 103Peso (kg) 3 polos 2.4 2.4 2.4 4.2 4.3
4 polos 3.2 3.2 3.2 5.6 5.6ManiobraEndurancia Eléctrica ciclos 415V CA 10,000 4,500
Mecánica ciclos 30,000 15,000 1 No se puede utilizar el MCCB en sistemas it a esta tensión *Sólo aplicable en los modelos 20A y 32A – No disponible
Características eléctricas según IEC 60947-2, EN 60947-2, JIS C 8201-2-1 ANN.1, AS/NZS 3947-2, NEMA AB-1
18 | Interruptores automáticos de caja moldeada
TB2 S250 TB2 S/H/L 250S250 S250 S125 H125 L125 H160 L160NJ GJ RJ NJ NJ NJ NJ3,4 3,4 3,4 3,4 3,4 3,4 3,4160,200,250 160,200,250 20,32,50,63,100,125 160 160
690 250
690 250
690 250
690 250
690 250
690 250
690 250
800 800 800 800 800 800 8008 8 8 8 8 8 8
7.5 25 253665 40
7.5 25 506585 40
20 35 6565100 40
20 45 120125150 40
25 65 180200200 40
20 45 120125150 40
25 65 180200200 40
7.5 25 253665 40
7.5 25 253685 40
15 35 6565100 40
15 45 8085150 40
20 65 135150150 40
15 45 8085150 40
20 65 135150150 40
22 65
25 85
35 100
45 150
65 200
45 150
65 200
A A A A A A A
165 165 165 165 165 165 165105 105 105 105 105 105 105140 140 140 140 140 140 14068 68 103 103 103 103 1031.5 1.5 2.4 2.4 2.4 2.5 2.51.9 1.9 3.2 3.2 3.2 3.3 3.3
10,000 30,000 20,00030,000 30,000 30,000
TB2 E/S 630 TB2 1000S400 S400 S400 S800 S800 S800
NJ GJ PJ CJ NJ RJ3,4 3,4 3,4 3,4 3,4 3,4
250,400 250,400 250,400 630,800 630,800 630,800
690 250
690 250
690 250
690 250
690 250
690 250
800 800 800 800 800 8008 8 8 8 8 8
2O 30 455085 40
20 30 6570100 40
20 30 8085100 40
101 151 303650 50
201 30 505085 50
251 45 6570100 50
15 30 455085 40
15 30 505085 40
15 30 808585 40
101 151 303650 50
201 30 505085 50
201 34 505075 50
25 85
30 100
30 100
15 50
30 85
65 200
A A A A A A
260 260 260 273 273 273140 140 140 210 210 210185 185 185 280 280 280103 103 103 103 103 1034.2 4.2 4.2 8.5 8.5 8.55.6 5.6 5.6 11.5 11.5 11.5
4,500 4,00015,000 10,000
Características eléctricas según IEC 60947-2, EN 60947-2, JIS C 8201-2-1 ANN.1, AS/NZS 3947-2, NEMA AB-1
Interruptores automáticos de caja moldeada | 19
Protección térmica ajustable del 63% al 100% de la
intensidad nominal.
TemBreak 2 Lite Características eléctricas según IEC 60947-2, EN 60947-2, JIS C 8201-2-1 ANN.1, AS/NZS 3947-2, NEMA AB-1
20 | Interruptores automáticos de caja moldeada
Referencia calibre Parámetros Cond. empleo TB2 Lite 250Modelo E250 E250 E250 E250 S250 S250Tipo SCF SCJ SF SJ SF SJNúmero de polos 3, 4 3, 4 3, 4 3, 4 3, 4 3, 4Corriente asignada In 50°C 125,150,175,
200,225,250100,125,160, 200,250
125,150,175, 200,225,250
100,125, 160, 200,250
125,150,175, 200,225,250
160,200,250
Características eléctricasTensión asignada de empleo Ue (V) CA 50/60 Hz
CC525 250 525 250 525 250 525 250 690 250 690 250
Tensión asignada de aislamiento Ui (V) 690 800 690 800 690 800Tensión asignada de resistencia a la onda de choque
Uimp (kV) 8 8 8 8 8 8
Poder asignado de corte último en cortocircuito (IEC, JIS, AS/NZS)
Icu (kA) 690V CA 525V CA 440V CA400/415C CA220/240V CA 250V CC
– 6 10 16 25 13
– 6 10 16 25 13
– 7.5 15 25 35 15
– 7.5 15 25 35 15
4 10 30 40 85 25
4 10 30 40 85 25
Poder asignado de corte de servicio en cortocircuito (IEC, JIS, AS/NZS)
Ics (kA) 690V CA 525V CA 440V CA400/415C CA220/240V CA 250V CC
– 3 5 8 13 7
– 3 5 8 13 7
– 6 12 19 27 12
– 6 12 19 27 12
4 7.5 15 20 43 13
4 7.5 15 20 43 13
Poder de corte nominal (NEMA) (kA) 480V CA 240V CA
6 25
6 25
10 35
10 35
25 85
25 85
ProtecciónTérmico fijo, magnético fijo q – q – q –Térmico ajustable, magnético ajustable – q – q _ qDimensiones
Alto (mm) 165 165 165 165 165 165Ancho (mm) 3 polos (4 polos) 105 (140) 105 (140) 105 (140) 105 (140) 105 (140) 105 (140)Fondo (mm) 68 68 68 68 68 68
Peso Peso (kg) 3 polos (4 polos) 1.5 (1.9) 1.5 (1.9) 1.5 (1.9) 1.5 (1.9) 1.5 (1.9) 1.5 (1.9)Endurancia
Eléctrica 415V 6,000Mecánica 18,000
– No disponible q Estándar 1 14,000<125A
Referencia calibre Parámetros Cond. empleo TB2 Lite 160Modelo E160 E160 E160 S160 S160 S160 S160 S160Tipo SF SF SJ SCF SCJ SHJ SF SJNúmero de polos 1 3,4 3,4 3,4 3, 4 3, 4 3, 4 3, 4Corriente asignada In (A) 50°C 16,20,25,32,
40,50, 63,80, 100,125
16,20,25,32, 40,50,63,80, 100,125,160
25,40,63, 80,100, 125,160
16,20,25,32, 40,50,63,80, 100,125,160
25,40,63,80, 100,125, 160
25,40,63, 80,100, 125,160
16,20,25, 32, 40,50,63,80, 100,125,160
25,40,63,80, 100,125, 160
Características eléctricasTensión asignada de empleo Ue (V) CA 50/60 Hz
CC240 –
525 250
525 250
525 250
525 250
525 250
690 250
690 250
Tensión asignada de aislamiento Ui (V) 690 690 690 690 690 690 690 690Tensión asignada de resistencia a la onda de choque
Uimp (kV) 8 8 8 8 8 8 8 8
Poder asignado de corte último en cortocircuito (IEC, JIS, AS/NZS)
Icu (kA) 690V CA 525V CA 440V CA400/415V CA220/240V CA 250V CC
– – – – 25 –
– 6 10 16 25 13
– 6 10 16 25 13
– 7.5 15 25 35 20
– 7.5 15 25 35 20
– 7.5 7.5 25 35 20
6 10 25 40 50 25
6 10 25 40 50 25
Poder asignado de corte de servicio en cortocircuito (IEC, JIS, AS/NZS)
Ics (kA) 690V CA 525V CA 440V CA400/415C CA
220/240V CA 250V CC
– – – – 13 –
– 3 5 8 13 7
– 3 5 8 13 7
– 4 7.5 13 18 10
– 4 7.5 13 18 10
– 4 4 25 25 10
3 7.5 13 20 25 13
3 7.5 13 20 25 13
Poder de corte nominal (NEMA) (kA) 480V CA 240V CA
– 25
6 25
6 25
7.5 35
7.5 35
– _
10 50
10 50
ProtecciónTérmico fijo, magnético fijo q q – q – – q –Térmico ajustable, magnético fijo – – q – q q – qDimensiones
Alto (mm) 130 130 130 130 130 130 130 130Ancho (mm) 3 polos (4 polos) 25 (1P) 75, (100) 75, (100) 75, (100) 75, (100) 75, (100) 75, (100) 75, (100)Fondo (mm) 68 68 68 68 68 68 68 68Peso (kg) 3 polos (4 polos) 0.3 (1P) 0.8 (1.0) 0.8 (1.0) 0.8 (1.0) 0.8 (1.0) 0.8 (1.0) 0.8 (1.0) 0.8 (1.0)
EnduranciaEléctrica 415V 10,000 10,0001
Mecánica 20,000 20,000
MCCBs con protección diferencial incorporada (CBR)
Cuando un CBR se utiliza como el dispositivo de conexión
de alimentación y está regulado a 30mA, no son necesarios
RCBOs en los circuitos de carga salientes para la protección
de corrientes diferenciales de fuga (a menos que se requiera
discriminación).
La protección diferencial proporcionada por el dispositivo de
conexión de suministro abarca todos los circuitos de carga.
Se pueden utilizar MCBs para proteger los circuitos de carga
y la instalación todavía reunirá los requisitos de protección
contra las corrientes diferenciales de fuga “RCD”.
¿Cómo puede un CBR ofrecerme ventajas económicas?CBR incorporada - “interruptores que
incorporan la protección diferencial como una función integrada”:IEC 60947-2 Anexo B.En otras palabras, un CBR es un interruptor
de caja moldeada -equivalente a un interruptor
combinado RCBO modular DIN- que incluye
sobrecarga, cortocircuito y protección
diferencial en un único aparato.
¿Qué es un CBR?
Características eléctricas según IEC 60947-1, IEC 60947-2, IEC 60947-2 ANNEX B, IEC 60755
Interruptores automáticos de caja moldeada | 21
Referencia calibre Parámetros Unidad Cond. empleo TB2 S125 TB2 S250Modelo ZE125 ZS125 ZS125 ZE250 ZS250 ZS250Tipo NJ NJ GJ NJ NJ GJNúmero de polos 3,4 3,4 3,4 3,4 3,4 3,4Corriente asignada In (A) 50°C 20,32,50,63,
100,12520,32,50,63, 100,125
20,32,50,63, 100,125
160,250 160,250 160,250
Características eléctricasTensión asignada de empleo Ue (V) CA 50/60 HZ 525 525 525 525 525 525Tensión asignada de aislamiento Ui (V) 525 525 525 525 525 525Tensión asignada de resistencia a la onda de choque
Uimp (kV) 8 8 8 8 8 8
Poder asignado de corte último en cortocircuito (IEC, JIS, AS/NZS)
Icu (kA) 525V CA 440V CA400/415V CA 220/240V CA
8 152535
22 253650
25 506585
10 152535
25 253665
25 506585
Poder asignado de corte de servicio en cortocircuito (IEC, JIS, AS/NZS)
Ics (kA) 525V CA 440V CA 400/415V CA220/240V CA
6 121927
22 2536/3050
22 2536/3385
7.5 121927
25 253665
25 253685
ProtecciónTérmico ajustable, magnético fijo, protección corriente residual
q q q q q q
DimensionesAlto (mm) 155 155 155 165 165 165Ancho (mm) 3 polos 90 90 90 105 105 105
4 polos 120 120 120 140 140 140Fondo (mm) 68 68 68 68 68 68Peso (kg) 3 polos 1.1 1.1 1.1 1.5 1.5 1.5
4 polos 1.4 1.4 1.4 1.9 1.9 1.9ManiobraEndurancia Eléctrica ciclos 415V CA 30,000 10,000
Mecánica ciclos 30,000 10,000– No disponible q Estándar
Ajustes protección diferencial: 30mA, 100mA, 300mA, 500mA, 1000mA y 3000mA
Interruptores de caja moldeada para aplicaciones especiales
Alto rendimiento a los voltajes de distribución que se encuentran en aplicaciones marinas. Terasaki suministra más aparamenta para buques que ningún otro fabricante en todo el mundo.
MCCBs con Icu = 70kA a 690V CA
Cada calibre dispone de una versión interruptor-seccionador sin protección integral. Tanto los accesorios internos como los externos son compatibles con las versiones interruptor automático.
Interruptores seccionadores
1000V CA es el voltaje de distribución utilizado donde se necesitan cables de cierta longitud. Esta gama de productos es ideal para minas y ferrocarriles.
MCCBs para 1000V CA
La salida de cortocircuito disponible de los generadores es inferior que la de los transformadores típicos. A veces, los MCCBs con protección instantánea sensible son necesarios para su uso con generadores.
Desconexión magnética baja
Hemos desarrollado una versión especial de MCCBs para proteger sistemas de CC superiores a 250V.Nuestra gama se extiende hasta 1000V CC y se utiliza a menudo para proteger plantas de energía solar.
Interruptores automáticos y seccionadores hasta 1000V CC
22 | Interruptores automáticos de caja moldeada
Accesorios MCCBs
Interruptores automáticos de caja moldeada | 23
Bloque exterior de
alimentación
Pletina seccionadora de Neutro
Contactos de alarma
Bloqueo por candado de la palanca del interruptor
Contactos auxiliares
Tapa cubrebornes para conexiones frontales
Tapa cubrebornes para conexiones posteriores base enchufable
Pletinas prolongadoras
Conexiones posteriores
Base fija para interruptor enchufable
Fijación a perfil Din
Separadores de fases
Marco embellecedor
Enclavamiento mecánico frontal
Enclavamiento mecánico tipo link*Enclavamiento mecánico mediante cable*
Equipo de verificación relé electrónico (OCR)
Mando rotativo directoMando rotativo
prolongado para panel
Mando motor
Tapa cubrebornes para bornes de conexión
Monitorización y alarma
temperatura bornes
Bornes de conexión
UVT Bobina de mínima tensión
SHT Bobina de emisión
*Compatible con mando motor o con cualquiera de los mandos.
Versión extraible
Automatismo de transferencia TemTransfer3 para conmutación automática de ACBs TemPower2, MCCBs TemBreak2 y contactores TemContact2 TemTransfer3 es un automatismo de conmutación. El módulo monitoriza la tensión y frecuencia de la alimentación principal en CA de dos fuentes distintas, que pueden ser el generador o la alimentación principal (Compañía) o una combinación de ambas.
El módulo monitoriza F1 (fuente 1) y en caso de fallo enviará una solicitud de arranque a F2 (fuente 2).
Se ha diseñado para monitorizar la entrada de la alimentación principal en CA (1 ó 3 fases) para caída y aumento de tensión y frecuencia. Si éstas cayeran fuera de los límites, el módulo enviaría una orden de arranque al controlador del generador. Una vez el generador está preparado y produciendo una salida dentro de los límites, el automatismo controlará los dispositivos de transferencia y conmutará la carga desde la fuente 1 a la fuente 2.
Características del producto TemTransfer3
La pantalla LCD retro-iluminada muestra el estado e indica cualquier advertencia del sistema a través de un texto de cuatro líneas.
Los LEDs rojos y verdes indican el estado de funcionamiento de la red. El módulo puede ser configurado fácilmente mediante el uso del software de configuración PC TemTransfer3, vía un kit de interfaz (opcional).
Soportar múltiples topologías diferentes, temporizadores configurables, entradas y salidas digitales libres de tensión hacen que el controlador TemTransfer3 sea una solución totalmente flexible para adaptarse a una amplia variedad de aplicaciones.
Automatismo de conmutación
• Pantalla LCD retroiluminada con display de texto de 4 líneas
• Reloj en tiempo real
• PC / Panel de configuración frontal
• Relés libres de potencia
• Temporizadores configurables
• Relés de extensión opcionales
• 5 salidas configurables
• 10 entradas configurables
• Registro de eventos
• Inhibición de arranque automático
• Inhibición de carga
• Comunicación
Fuente 1 Fuente 2
Diagrama esquemático: conmutación automática con TemTransfer3 e interruptores TemBreak2 enclavados
ESTADO ESTADO
ESTADO ON/OFF
ARRANQUE
24 | Automatismo de conmutación
Contactores TemContact2
TemContact2 es la gama de contactores y relés térmicos. Con un rango desde 6A hasta 800A, están disponibles en 8 calibres y en 3 o 4 polos.
TemContact2 ha mejorado la tensión de aislamiento (incrementándola de 690 a 1000V CA) y la tensión asignada de impulso (incrementándola de 6 a 8kV) en contactores por encima de 40A.
Accesorios opcionales:
• Contactos auxiliares
• Filtro antiparasitario
• Kit de conexionado
• Enclavamiento mecánico
• Tapa de seguridad
• Relé térmico
• Adaptador a rail DIN del relé térmico
• Resistencia limitadora (para contactores de
corrección de factor de potencia)
• Retención mecánica
• Unidad de reset remoto para relé térmico
Contactores y guardamotores
Contactores | 25
Interruptores guardamotores GM
• Protección ante sobrecargas y cortocircuitos para motores hasta 63A (240V CA, 15kW o 415V CA, 30kW)
• Dimensiones: 3 módulos 45mm o 55mm ancho
• Regulación sobrecarga: 0,1 a 63A:
- GM1S, GM1H: 45mm ancho, ajustes de 0,1 a 32A- GM2S, GM2H: 55mm ancho, ajustes de 6,3 a 63A
• Hasta 32A, versiones con mando rotativo y mando interruptor.
• Accesorios opcionales:- Contactos auxiliares internos y externos- Contactos de alarma internos y externos- Contactos de indicación de cortocircuito- Bobinas de emisión- Bobinas de mínima tensión- Mandos a panel (GM1H y GM2H)
Guía de Selección contactores de 3P
Relés térmicos tipo TK
Modelo Parámetros Unidad TC-9b TC-12b TC-18b TC-22b TC-32a TC-40a TC-50a TC-65a
Calibre 22 AF 40 AF 65 AF
Rangos de intensidad y potencia
Intensidad térmica (Ith) AC1 A 25 25 40 40 50 60 70 100
Potencia 200/240V AC3 kW 2.5 3.5 4.5 5.5 7.5 11 15 18.5
Intensidad 200/240V AC3 A 11 13 18 22 32 40 55 65
Potencia 380/440V AC3 kW 4 5.5 7.5 11 15 18.5 22 30
Intensidad 380/440V AC3 A 9 12 18 22 32 40 50 65
Potencia 500/550 AC3 kW 4 7.5 7.5 15 18.5 22 30 33
Intensidad 500/550 AC3 A 7 12 13 20 28 32 43 60
Potencia 690V AC3 kW 4 7.5 7.5 15 18.5 22 30 33
Intensidad 690V AC3 A 6 9 9 18 20 23 28 35
Características eléctricas
Tensión asignada de empleo Ue V 690 690 690
Tensión asignada de aislamiento Ui V 690 1000 1000
Frecuencia asignada f Hz 50/60 50/60 50/60
Tensión asignada de resistencia a la onda de choque
Uimp kV 6 8 8
Maniobra
Valor máximo de operación AC3 op/h 1800 1800 1800
Mecánica millones 15 15 12
Eléctrica millones 2.5 2.5 2
Dimensiones
Control CA Peso kg 0.34 0.55 1.05
Ancho x Alto x Fondo mm 45 x 73.5 x 86 69 x 83 x 93 79 x 106 x 119
Control CC Peso kg 0.51 0.77 1.3
Ancho x Alto x Fondo mm 45 x 73.5 x 104 69 x 83 x 120 79 x 106 x 147
Tamaño Nema 00 00 0 1 1 1 2 2
Contactos auxiliares
Contactos auxiliares (incluidos de serie) 1NA 1NC 2NA 2NC 2NA 2NC
Modelo Parámetros Unidad TK-32 TK-32 TK-63
Características eléctricas
Tensión asignada de empleo Ue V 690 690 690
Tensión asignada de aislamiento Ui V 690 690 690
Tensión asignada de resistencia a la onda de choque
Uimp kV 6 6 6
Rango de ajuste
Rango de ajuste A 0.1~40 0.1~40 4~65
Clase de disparo 10A,20 10A,20 10A,20
Dimensiones
Peso kg 0.17 0.17 0.31/0.33
Ancho x Alto x Fondo mm 45 x 75 x 90 45 x 75 x 90 55 x 81 x 100
26 | Contactores
TC-75a TC-85a TC-100a TC-130a TC-150a TC-185a TC-225a TC-265a TC-330a TC-400a TC-500a TC-630a TC-800a
100 AF 150 AF 225 AF 400 AF 800 AF
110 135 160 160 210 230 275 300 350 450 580 660 900
22 25 30 37 45 55 75 80 90 125 147 190 220
75 85 105 130 150 185 225 265 330 400 500 630 800
37 45 55 60 75 90 132 147 160 200 265 330 440
75 85 105 130 150 185 225 265 330 400 500 630 800
37 45 55 60 70 110 132 147 160 225 265 330 500
64 75 85 90 100 180 200 225 280 350 400 500 720
37 45 55 55 55 110 140 160 200 250 300 400 500
42 45 65 60 60 120 150 185 225 300 380 420 630
690 690 690 690 690
1000 1000 1000 1000 1000
50/60 50/60 50/60 50/60 50/60
8 8 8 8 8
1800 1200 1200 1200 1200
12 5 5 5 2.5 2.5
2 1 1 1 0.5 0.5
1.9 2.4 5.4 9.2 22.4
94 x 140 x 137 119 x 158 x 132 138 x 203 x 185 163 x 243 x 205 285 x 312 x 245
2.8 2.3 5.4 9.2 22.4
94 x 140 x 172.3 119 x 158.5 x 132 138 x 203 x 185 163 x 243 x 205 285 x 312 x 245
2 3 3 3 4 4 4 5 5 5 6 6 7
2NA 2NC 2NA 2NC 2NA 2NC 2NA 2NC 2NA 2NC
TK-95 TK-150 TK-225 TK-400 TK-800
690 690 690 690 690
690 690 690 690 690
6 6 6 6 6
7~100 34~150 64~240 85~400 200~800A
10A,20 10A,20 10A,20 10A,20 10A,20
0.48/0.5 0.67 2.5 2.6 11.5
70 x 97 x 110 95 x 109 x 113 147 x 141 x 184 151 x 171 x 198 860 x 530 x 212
Contactores | 27
Guía de Selección contactores de 4P
TK Type Thermal Overload relays
Modelo Parámetros Unidad TC-6a/4 TC-9a/4 TC-12a/4 TC-18a/4 TC-22a/4 TC-32a/4 TC-40a/4 TC-50a/4 TC-65a/4 TC-75a/4 TC-85a/4
Calibre 18 AF 22 AF 40 AF 85 AF
Rangos de intensidad y potencia
Intensidad térmica (Ith) A 25 25 25 40 40 50 60 80 100 110 135
Potencia 200/240V AC1 kW 9 9 9 15 15 18 22 30 37 41 51
Intensidad 200/240V AC1 A 25 25 25 40 40 50 60 80 100 110 135
Potencia 380/440V AC1 kW 17 17 17 27 27 35 42 56 70 76 95
Intensidad 380/440V AC1 A 25 25 25 40 40 50 60 80 100 110 135
Potencia 200/240V AC3 kW 2.2 2.5 3.5 4.5 5.5 7.5 11 15 18.5 22 25
Intensidad 200/240V AC3 A 9 11 13 18 22 32 40 55 65 75 85
Potencia 380/440V AC3 kW 3 4 5.5 7.5 11 15 18.5 22 30 37 45
Intensidad 380/440V AC3 A 7 9 12 18 22 32 40 50 65 75 85
Características eléctricas
Tensión asignada de empleo
Ue V 690 690 690 690
Tensión asignada de aislamiento
Ui V 690 690 690 1000
Frecuencia asignada f Hz 50/60 50/60 50/60 50/60
Tensión asignada de resistencia a la onda de choque
Uimp kV 6 6 6 8
Maniobra
Valor máximo de operación
AC3 op/h 1800 1800 1800 1800
Mecánica millones 15 15 15 12
Eléctrica millones 2.5 1 1 1
Dimensiones
Control CA Peso kg 0.33 0.4 0.59 1.2
Ancho x Alto x Fondo mm 45 x 73.5 x 82 47.2 x 80 x 86.8
59 x 83.5 x 94.5 91 x 123.5 x 117.8
Control CC Peso kg 0.5 0.5 0.7 1.29
Ancho x Alto x Fondo mm 45 x 73.5 x 97 47.2 x 80 x
113.2
59 x 83.5 x 121 91 x 123.5 x 117.8
Tamaño Nema 00 00 0 0 1 1 1 2 2 2 3
Contactos auxiliares
Contactos auxiliares (incluidos de serie)
– – – –
28 | Contactores
TC-100/4 TC-130a/4 TC-150a/4 TC-185a/4 TC-225a/4 TC-265a/4 TC-330a/4 TC-400a/4 TC-500a/4 TC-630a/4 TC-800a/4
225 AF 400 AF 800 AF
160 165 250 300 330 360 420 500 650 750 900
57 60 76 87 100 115 135 160 245 255 310
150 155 200 230 260 300 350 420 630 660 800
106 110 142 165 185 215 250 300 450 470 570
150 155 200 230 260 300 350 420 630 660 800
30 37 95 55 75 80 90 125 147 190 220
105 125 150 185 225 265 330 400 500 630 800
55 60 75 90 132 147 160 200 265 330 440
105 120 150 185 225 265 330 400 500 630 800
690 690 690
1000 1000 1000
50/60 50/60 50/60
8 8 8
1200 1200 1200
15 15 12
0.8 0.5 2.5
5.6 9.9 26.3
175 x 203 x 185
206 x 243 x 205 346 x 310 x 244
5.6 9.9 26.3
175 x 203 x 185
206 x 243 x 205 346 x 310 x 244
3 3 4 4 4 5 5 5 6 6 7
2N02NC 2N02NC 2N02NC
Contactores | 29
30 | Protección modular DIN
Accesorios
Protección modular DIN
Seguridad y protección son los objetivos fundamentales de los productos Terasaki. Nuestra gama de productos de protección modular DIN cubre el rango de intensidades desde 0,5A a 125A, incluyendo:
• Interruptores automáticos magnetotérmicos para la protección contra sobrecargas y cortocircuitos
• Interruptores diferenciales para la prevención contra los efectos de las descargas eléctricas
• Interruptores combinados para la protección contra sobrecargas, cortocircuitos y defectos a tierra
Con más de 500 productos en la gama, disponemos de una solución para la mayoría de aplicaciones.
A. Contacto auxiliar 1NA, 1NC, 6A, 230V CA. No apto para TD3 RCCB.
B. Contacto de alarma 1NA, 1NC, 6A, 230V CA. No apto para TD3 RCCB.
C. Auxiliar para interruptor diferencial. Combinación de contacto auxiliar (1NA, 1NC, 6A, 230V CA) + contacto de alarma (1NA, 1NC, 6A, 230V CA).
D. Bobina de emisión. El auxiliar para interruptor diferencial (C) debe ser montado en el TD3 RCCB antes que la bobina de emisión.
E. Bobina de mínima tensión. El auxiliar para interruptor diferencial (C) debe ser montado en el TD3 RCCB antes que la bobina de mínima tensión.
F. Bobina de sobretensión. Tensión nominal, Un, 230V CA. Provoca el disparo del interruptor automático al que está asociada cuando la tensión de red sobrepasa los 280V CA. El auxiliar para interruptor diferencial (C) debe ser montado en el TD3 RCCB antes que la bobina de sobretensión.
G. Dispositivo de bloqueo por candado. Para el bloqueo de los interruptores automáticos magnetotérmicos TD3 M06, TD3 M10, TD3 XA (en posición abierto o cerrado) y para los interruptores magnetotérmicos TD31P1M (sólo en posición abierto).
H. Bloque diferencial para TD3 M06, TD3 M10
I. Mando rotativo para TD3 ICP
J. Bloque diferencial para TD3XA
A B C D E F G H I
Guía de Selección protección modular DIN
Protección modular DIN | 31
Interruptores automáticos magnetotérmicos Tipo MCB MCB MCB MCB MCB
Modelo Cantidad Unidad TD3 EM06 / M06 TD3 M10 TD3 1P1M TD3 XA TD3 ICP
Polos (módulos)1 (1), 1+N (2), 2 (2),
3 (3), 3+N(4), 4 (4)
1 (1), 1+N (2), 2 (2),
3 (3), 3+N(4), 4 (4)1+N (1)
1 (1.5), 2 (3), 3 (4.5),
4 (6)1 (1), 1+N (2), 2 (2), 3 (3), 4 (4)
Características eléctricas
NormaIEC/EN 60898
IEC/EN 60947-2
IEC/EN 60898
IEC/EN 60947-2IEC/EN 60898
IEC/EN 60898
IEC/EN 60947-2UNE EN 20317
Intensidad nominal In A6, 10, 16, 20, 25, 32, 40,
50, 63
0.5*, 1*, 2*, 3*, 4*, 6, 10,
16, 20, 25, 32, 40, 50, 636, 10, 16, 20, 25, 32, 40 80, 100, 125
5, 7.5, 10, 15, 20, 25, 30, 35, 40,
45, 50, 63
Tensión nominal Ue V 230/400 - 240/415 230/400 - 240/415 230 - 240 230/400 - 240/415 230/400 - 240/415
Frecuencia nominal Hz 50/60 50/60 50/60 50/60 50/60
Poder de corte Icn (Icu) kA 6 / 10 sólo M06 10 / 15 6 10 (10) 6
Protección
Curva magnetotérmica Tipo B**, C B, C, D C C, D ICP-M
Conexión
Cable rígido mm2 25 35 16 70 25
Cable flexible 16 25 10 35 16
Dimensiones
Por módulo Alto x Fondo
x Anchomm 85 x 74 x 17.5 84 x 74 x 17.5 84 x 74 x 17.5 90 x 72 x 26.5 85 x 74 x 17.5
*Sólo para curva D **Sólo para M06
Interruptores diferenciales e interruptores seccionadores modulares Tipo RCCB RCCB RCBO RCBO Interruptor seccionador modular
Modelo Cantidad Unidad TD3 ERCD(1) / RCCB TD3 RCCB TD3 RCBO TD3 RCBO TD3 MS
Polos (módulos) 2 (2) 4 (4) 1+N (1) 1+N (2) 1 (1), 2 (1), 2 (2), 3 (2), 3 (3), 4 (4)
Características eléctricas
Norma IEC/EN 61008 IEC/EN 61008 IEC/EN 61009 IEC/EN 61009 IEC EN 60947-3
Sensibilidad (I n) mA 30 100 300 30 100 300 30 30 300
Intensidad nominal In AAC
clase
25, 40,
63, 100
40,
63
25, 40,
63
25, 40,
63, 80,
100
25,
40
25, 40,
63, 80,
100
6 - 40 6 - 40 6-40 32 63 100 125
In AA
clase
25, 40,
63– –
40,
63,
100
– – – 6-40 –
In AAC-S
clase– – – – –
40,
100– – –
In AAi
clase
25, 40,
63– – 40 – – – – –
In AS-Ai
clase– – 40, 63 – –
40,
100– – –
Tensión nominal Un V 230 - 240 230/400 - 240/415 230 - 240 230/240 230/400 - 240/415
Poder de corte Icn (Im) (1.5) (1.5) 10 6 – – – –
Energía admisible (EN 61008) I2t kA2s > 22.5 > 22.5 – – – – – –
Int. de pico admisible (EN 61008) I peak kA > 3.3 > 3.3 – – – – – –
Corriente asignada de corta
duración admisibleIcw (rms) kA – – – – 0.48 0.94 1.2 1.5
Frecuencia nominal Hz 50 50 50/60 50 50/60
Protección
Curva magnetotérmica Tipo – – B, C C – – – –
Conexión
Cable rígido mm2 25 25 16 25 25 50 50 50
Cable flexible mm2 16 16 10 16 16 35 35 35
Dimensiones
Por módulo Alto x Fondo
x Anchomm 87.5 x 71 x 17.5 87.5 x 71 x 17.5 115 x 72 x 17.5 85.4 x 72 x 17.5 83 x 72 x 17.5
(1) 2P, 25-40A, 30mA, AC.
Interruptores seccionadores y conmutadores
Interruptores seccionadores de 40A a 6300A
• De 3 y 4 polos
• Maniobra bajo carga hasta 1000V en CA (inductivas y capacitivas) y CC
• Intensidad de corte de hasta 8 veces la intensidad de empleo
• Capacidad de establecer y soportar intensidades de cortocircuito de hasta 100kA
• Servicio ininterrumpido en condiciones extremas (tropicales y polares) y en ambientes
industriales
• Aislamiento e indicación de los contactos fiable durante toda la vida del interruptor incluso después de cortocircuitos: ensayado como
interruptor seccionador según IEC/EN 60947-3
• También disponibles, para todos los calibres, versiones en 4P, con cierre y apertura de los 4 polos simultáneamente. Para uso en
aplicaciones en CC principalmente
Interruptores seccionadores para aplicaciones especiales
• Interruptores seccionadores para aplicaciones en fotovoltaica, CC
• Interruptores seccionadores con fusibles
Conmutadores de 40A a 3150A
• De 3 y 4 polos
Accesorios opcionales:• Mando directo• Mando panel• Mando panel emergencia• Accesorio para fijación a carril DIN• Cubrebornes
• Placa de protección• Ejes prolongados• Contactos auxiliares• Mando motorizado
Accesorios opcionales:• Mando directo • Mando a panel • Mando panel con eje prolongado
Accesorios opcionales:• Mando directo • Mando a panel • Mando motorizado
Modelo 2CModelo 1CBrida
32 | Interruptores seccionadores
Tablas de selectividad: caja moldeada / aparamenta modular
Selectividad entre interruptor de caja moldeada e interruptor magnetotérmico Aguas arriba
S160-SJ (40kA) S160-SCJ (25kA) E160-SJ (16kA) S250-SJ (40kA) E250-SJ (25kA) E250-SCJ (16kA)
In 25A 40A 63A 80A 100A 125A 160A 100A 125A 160A 200A 250A
Prot
ecci
ón d
e lín
ea
TD3 M
06, T
D3 M
10
6A 1000 1000 3000 3000 5000 5000 600 T T T T T
10A 1000 1000 2000 2000 4000 4000 5000 T T T T T
16A 600 600 2000 2000 3000 3000 4000 T T T T T
20A 600 600 2000 2000 3000 3000 4000 T T T T T
25A • 600 1500 1500 2500 2500 3000 T T T T T
32A • 600 1500 1500 2500 2500 3000 9000 T T T T
40A • • 1500 1500 2500 2500 3000 8000 9000 T T T
50A • • 1500 1500 2500 2500 3000 7000 8000 9000 T T
63A • • • 1500 2500 2500 3000 6000 7000 8000 9000 T
Selectividad entre interruptores de caja moldeada Aguas arriba
Prot
ecci
ón d
e lín
ea
Modelo 250A 400A 630A 800A 1000A 1250A 1600A
S250-NE, S250-GE
S250-PE, H250-NE
S400-NE, S400-GE,
S400-PE
E630-NE,S630-CE,
S630-GE
S800-NE S800-RE H800-NE,
L800-NE
S1000-SE S1000-NE S1250-SE,
S1250-NE
S1250-GE S1600-SE S1600-NE
36kA, 65kA70kA, 85kA
50kA, 70kA,85kA
50kA 50kA 70kA 125kA,200kA
50kA 70kA 50kA, 70kA 100kA 50kA 100kA
TB2
S125
S125-NJ 36kA T T T T T T T T T T T T
S125-GJ 65kA T T T T 50 T T T T T T T
TB2
S250
S160-NJ 36kA • T T T T T T T T T T T
S160-GJ 65kA • T T T 36 T T 50 T T T T
S250-NJ 36kA • T T T T T T T T T T T
S250-GJ 65kA • T T T 36 T T 50 T T T T
TB2
S/H/
L 250
H125-NJH160-NJ
125kA T T T T 50 T T T T 70 T 85
S250-NE 36kA • • T T T T T T T T T T
S260-GE 65kA • • T T 36 36 T 50 T T T T
H250-NJ 125kA • • T T 50 T T T T 70 T 85
S250-PE 40kA • • T T 36 36 T 50 T 70 T T
H250-NE 125kA • • T T 36 36 T 50 T 70 T 85
TB2
E/S 6
30
E400-NJ 25kA • • 10 T T T T T T T T T
S400-CJ 36kA • • 10 25 25 25 30 30 T T T T
S400-NJ 50kA • • 10 25 25 25 30 30 36 36 T T
S400-NE 50kA • • 10 25 25 25 30 30 36 36 T T
S400-GJS400-GES400-PJS400-PE
70kA • • 10 25 25 25 30 30 36 36 T 50
E400-NE 36kA • • • • • • • • T T T T
S630-CE 50kA • • • • • • • • 36 36 T T
S630-GE 70kA • • • • • • • • 36 36 T 50
TB2
1000
S800-CJS800-NJS800-RJS800-NES800-RE
36kA • • • • • • • • • • 20 20
Cascada entre interruptor de caja moldeada e interruptor magnetotérmicoAguas arriba
S160-SJ (40kA) S160-SCJ (25kA) E160-SJ (16kA) S250-SJ (40kA) E250-SJ (25kA) E250-SCJ (16kA)
In 25kA 40kA 63kA 80kA 100kA,125kA, 160kA 25kA 40kA 63kA 100kA 125kA 160kA 160kA 100kA, 125kA, 160kA, 200kA, 250kA
Prot
ecci
ón d
e lín
ea
6A, 10A, 16A, 20A
25 25 25 25 20 40 40 40 40 30 25 20 25
25A • 25 25 25 20 • 40 40 40 30 25 20 25
32A • 25 25 25 20 • 40 40 40 30 25 20 25
40A, 50A • • 25 25 20 • • 40 40 30 25 20 25
63A • • • 25 20 • • • 40 30 25 20 25
Notas:1. Límite del nivel de defecto de cascada expresada en kA
Notas:
1. Valor no disponible para S160-GJ
2. Is expresada en A
3. T=Selectividad total
Notas: 1. Todos los ajustes de intensidad y tiempo de retardo deben ajustarse al valor máximo para el interruptor de caja moldeada aguas arriba.
2. Is expresada en kA.
3. T=Selectividad total.
Selectividad | 33
Canalización eléctrica prefabricada
34 | Canalización eléctrica prefabricada
MEDIA POTENCIA 100A ÷ 800A
Este sistema de canalizaciones eléctricas prefabricadas se utiliza para la distribución
de energía de mediana potencia en los sectores industrial, comercial y de servicios, se
ofrece en versión con conductores de aluminio y cobre, en corrientes nominales de 100A
a 800A. La envolvente se construye de dos perfiles de acero galvanizado que montado en
conjunto ofrece excelente rigidez y resistencia mecánica. Está disponible en 3P+N+tierra
(envolvente) o 3P+N+PE+tierra (envolvente).
Los conductores son de aluminio estañado en toda su superficie mientras que los
conductores de cobre pueden ser estañados bajo demanda. El grado de protección estándar es IP55 sin necesidad de accesorios. Las
ventanas de derivación tienen un sistema de apertura/cierre automático que permite la conexión y desconexión de las cajas de derivación
con la línea energizada y garantizando siempre el grado de protección. La unión entre elementos se realiza por medio de un sistema de
enganche que ofrece, al mismo tiempo la conexión mecánica y eléctrica. El sistema no requiere mantenimiento.
BAJA POTENCIA 25A ÷ 40A
Sistema de canalizaciones eléctricas prefabricadas proyectado para la distribución de
puntos de iluminación y pequeñas potencias. Está disponible en corrientes nominales de
25A y 40A, los conductores son de cobre y aislados a lo largo de todo su recorrido, con
un material termoplástico autoextinguible y libre de halógenos. La envolvente (también
usada como conductor de tierra - PE) está disponible tanto en acero galvanizado en
caliente como en acero galvanizado en caliente plastificado en color blanco, siendo
este último recomendable en aquellos lugares donde se requiera resistencia a agentes
químicos. Las configuraciones de circuitos son 2P, 4P y 6P en una única envolvente y
2P+2P, 4P+2P, 4P+4P y 6P+6P en una envolvente doble que separa mecánicamente
los dos circuitos en toda su longitud para garantizar la continuidad de servicio (por
ejemplo, cuando es usado como circuito de emergencia).
ALTA POTENCIA400A ÷ 6300A
Sistema de canalizaciones eléctricas prefabricadas diseñado para el transporte y la
distribución de energía eléctrica de alta potencia. Se ofrece en corrientes nominales de
400A a 5000A con conductores de aluminio y corrientes nominales de 630A a 6300A
con conductores de cobre (disponibles bajo consulta). Su envolvente es muy liviana, está
fabricada en una aleación de aluminio extruido (pintado en color aluminio) que le otorga
al producto una excelente rigidez y resistencia mecánica; esto permite una importante
reducción de costes de instalación debido a su bajo peso. La versión estándar puede ser
utilizada en condiciones atmosféricas extremas o en lugares donde las especificaciones
exigen un bajo campo magnético inducido, aplicaciones en CC, principalmente.
Canalización eléctrica prefabricada
Canalización eléctrica prefabricada | 35
Especificaciones
Baja potencia Media potencia Alta potencia
Aplicaciones Distribución, iluminación y pequeña potencia
Distribución de energía eléctrica de media potencia
Transporte y distribución de energía eléctrica de alta potencia
Instalaciones Industriales, edificios comerciales y de servicios
Industriales, residenciales, edificios comerciales y de servicios
Industriales, residenciales, edificios comerciales y de servicios
Rango 25A a 40A 100A a 800A 400A a 6300A
Conductores Cobre Aluminio / Cobre Aluminio / Cobre
Grado de protección estándar IP55 IP55/ IP66 IP55/ IP66
Certificados
Conforme a Normas IEC/EN 60439-1&2, 6 Conforme a Normas IEC/EN 60439-1&2, 6 Conforme a Normas IEC/EN 60439-1&2, 6
Certificado T.T.A. Ensayo en CEP atravesando muro/techo según EN 1366-3 EI180 (180 minutos)
Verificación de la no-propagación de la llama (IEC 60332)
Verificación de la resistencia a la llama mediante shock mecánico (IEC 60331)• 45 minutos (producto estándar)• 120 minutos (aislamiento especial)• 180 minutos (aislamiento especial)
Ensayo resistencia al fuego
Verificación de la continuidad de la distribución de energía en caso de incendio [DIN 4102/12 E120 (120 minutos)]
CEP a través de pared/techo [DIN 4102/9 S120 (120 minutos)]CEP a través de pared/techo [EN 1366/3 EI180 (180 minutos)]Vibración [IEC 60068] a 0,7g/2,0g (aceleración)Mapeo de nivel de campo electromagnético [CEI211-6/2001]
Verificación de sobre-temperatura y valores de cortocircuito de la unidad equipada con interruptor automático[IEC 60439-1/2]
Ref. catálogo: 19-G00ES
© Terasaki Electric (Europe) Ltd, 2019.
Valores y características sujetos a cambios sin previo aviso.
TERASAKI ELECTRIC CO., LTD.HEAD OFFICE: 7-2-10 Hannancho, Abenoku,Osaka, JapónCIRCUIT BREAKER DIVISION: 7-2-10 Kamihigashi, Hiranoku Osaka, JapónTeléfono: 81-6-6791-9323Fax: 81-6-6791-9274Email: int-sales@terasaki.co.jp http://www.terasaki.co.jp/
TERASAKI ELECTRIC (EUROPE) LTD. 80 Beardmore Way, Clydebank Industrial EstateClydebank, Glasgow, G81 4HTScotland (Reino Unido)Teléfono: 44-141-941-1940Fax: 44-141-952-9246Email: marketing@terasaki.co.uk http://www.terasaki.com/
TERASAKI ELECTRIC (EUROPE) LTD.(FILIALE ITALIA) Via Ambrosoli, 4A-20090 Rodano, MilanoItaliaTeléfono: 39-02-92278300Fax: 39-02-92278320Email: info@terasaki.it http://www.terasaki.it/
TERASAKI ELECTRIC (EUROPE) LTD.(FILIAL SVERIGE)Box 2082, Flygfältsgatan 12, SE-128 22 Skarpnäck, SueciaTeléfono: 46-8-556-282-30Fax: 46-8-556-282-39Email: info@terasaki.se http://www.terasaki.se
TERASAKI MIDDLE EASTSaif Zone Q3-168, PO Box120860Sharjah, EAUTeléfono: 971-56-676-4825Fax: 976-655-78141Email: middleeast@terasaki.co.uk http://www.terasaki.com
TERASAKI CIRCUIT BREAKERS (S) PTD. LTD.17 Tuas Street, Singapore 638454, SingapurTeléfono: 65-6744-9752Fax: 65-6748-7592Email: tecs@pacific.net.sg
TERASAKI ELECTRIC (M) SDN, BHD.Lot 3, Jalan 16/13D, 40000 Shah Alam, Selangor DarulEhsan, MalasiaTeléfono: 60-3-5549-3820Fax: 60-3-5549-3960Email: terasaki@terasaki.com.my
TERASAKI DO BRASIL LTDA.Rua Cordovil, 259-Parada De Lucas, 21250-450Rio De Janeiro-R.J., BrasilTeléfono: 55-21-3301-9898Fax: 55-21-3301-9861Email: terasaki@terasaki.com.br http://www.terasaki.com.br
TERASAKI ELECTRIC (CHINA) LTD.72 Pacific Industrial Park, Xin Tang Zengcheng,Guangzhou 511340, ChinaTeléfono: 86-20-8270-8556Fax: 86-20-8270-8586Email: terasaki@public.guangzhou.gd.cn
TERASAKI ELECTRIC GROUP SHANGHAI REPRESENTATIVE OFFICERoom No. 1405-6, Tomson Commercial Building710 Dong Fang Road, Pudong, Shanghai, 200122, ChinaTeléfono: 86-21-58201611Fax: 86-21-58201621Email: terasaki@vip.163.com
ISO 9001: 2008
TERASAKI ELECTRIC (EUROPE) LTD.Pol. Ind. Coll de la Manya, C/Cal Ros dels Ocells 508403 Granollers, Barcelona, EspañaTeléfono: 34-93-879-60-50Fax: 34-93-870-39-05Email: terasaki@terasaki.es http://www.terasaki.es/
www.terasaki.es
900 60 50 70ventas@terasaki.es
Protection, Monitoring and Control Components for Low Voltage Equipment
SELECTION GUIDE: EUROPEAN EDITION
Terasaki supply circuit breakers which protect
people and equipment from electrical faults.
Safety and protection are the prime purposes
of our products.
We supply products to switchboard builders,
shipbuilders and equipment manufacturers.
We are global market leaders for switchgear
in the marine market. Terasaki have worldwide
export experience and the necessary
professional skills to support your business.
[Terasaki is the world leader for circuit breakers in switchgear in the marine market]
[Telehouse Data Centre, London. 199 TemPower 2 ACBs, 423 TemBreak 2 MCCBs.]
Contents | 3
CONTENTS
Terasaki Profile 4
Overheating Protection and Selectivity Analysis Software 6
Moulded Case Circuit Breakers 7
Electronic Protection Including Types with Monitoring and Communication 8
Adjustable Thermal and Adjustable Magnetic Protection 12
TemBreak 2 Lite 14
Circuit Breakers with Integral Residual Current Protection (CBR) 16
Moulded Case Circuit Breakers for Special Applications 18
MCCB Accessories 19
Air Circuit Breakers 20
ACB Selection Guide 21
Protection Relay Guide 22
ACB Accessories 23
Retrofit 24
Advanced External Display and Protection Products 26
Monitoring and Communication: T2ED 26
Multi-Protection Relay: TemTrip 2 26
Contactors and Manual Motor Starters 27
Contactor Selection Guide 3P 28
Contactor Selection Guide 4P 30
MMS Selection Guide 32
Automatic Transfer Controller and Earth Leakage Protection Relays 33
DIN Modular Protection 34
Accessories 34
Din Modular Protection Selection Guide 35
TERASAKI PROFILE
Foundation: October 1, 1923
Established: April 1, 1980
Capital: 1236640 thousands of yen
President: Taizo Terasaki
Number of Employees: 1776
Net sales: 36880 million yen
Subsidiaries: 5 domestic (Japan) and 8 overseas
Affiliated companies: 2 domestic
Listing: Tokyo Stock Exchange (Jasdaq)
[Security code 6637]
Mr. Taizo Terasaki President
Mr. Yasuhiko Terasaki Late chairman of the company
Mr. Yasutaro Terasaki Founder of the company
“We want to meet the needs of more customers
around the world in our circuit breaker and lifecycle
service businesses.” Mr. Taizo Terasaki, President
NUCLEAR POWER: Ringhals, Sweden
SOLAR POWER: South Italy
DESALINATION PLANT: Spain
MARINE: Oil Tanker “Belokamenka”, Russia
MINING: BHP Billiton, Australia
ALUMINIUM SMELTER: ALBA, Bahrain
OIL PRODUCTION: Sakhalin Island, Russia
DATA CENTRE: Telehouse London, UK
AUTOMOTIVE: Toyota ManufacturingPlant, Argentina
4 | Terasaki Profile
PRODUCTS & SERVICES
Air Circuit Breakers
Moulded Case Circuit Breakers
Din Modular Protection
Automatic Transfer Controller
Din Modular Protection
Contactors
Asset Management
Retrofit
Safety & Reliability High MTBF; Low MTTR; temperature monitoring, double control circuits
Approvals ISO 9001; ISO 14001; OHSAS 18001; Lloyds; BV; GL; GOST; SABS; DEKRA (KEMA); ASTA; IEC 60947-2; IEC 61439; IEC 60898
Asset Management Retrofits; Preventative Maintenance; Lifecycle Management
Special Protection Solutions DC; PV; UPS; 1000V AC; Integrated residual protection; 100kA and above
CAPABILITIES External Display
R&D
We are meeting the needs of customers with a complete system of development, design and manufacture based on the know-how we have accumulated with electrics, electronics and control over the decades since our founding.
We have DEKRA (formerly KEMA) -approved test systems and two generators in house to carry out the necessary development tests.
Terasaki realises optimised products through 3D CAD, software development, mould and sheet metal design, structural design and resin flow analysis.
Terasaki Profile | 5
3C Overheating Protection for Contacts, Connections & Conductors
TemCurveLite 3.0
• LOW INVESTMENT [system is integrated with circuit breakers]
• FAST INSTALLATION [breakers are supplied with sensors already fitted]
• EASY UPGRADE [the 3C system can be retrofitted to existing installations]
• FREE EXTENDED WARRANTY ON NEW CIRCUIT BREAKERS [when 3C overheating protection is included with the order]
OVERHEATING PROTECTION
BENEFITS
TemCurve Selectivity Analysis Software
TemCurve Lite Selectivity Software can assist in protection device grading from the transformer primary to the point of final distribution. The software is designed for the Terasaki range of circuit breakers, but also includes a large number of complimentary protection devices such as low and high voltage fuses and relays.
• The software package is now multilingual allowing you to select from: English, Italian, Spanish, Russian, Swedish, Chinese and Japanese language options
• It can output DXF and PDF files
• Latest product developments included: TemBreak 2 Lite MCCBs and TemBreak 2 CBRs.
TemCurve Lite 3.0 is FREE
6 | Overheating Protection & Selectivity Software
Moulded Case Circuit Breakers
1. Electronic Versions with integrated monitoring and communication Data can be sent to integrated display, local display and Modbus network simultaneously.
2 Smaller 1000A MCCB It is only 273mm high and 210mm wide - same size as 800A MCCB
3. Superior temperature performance We offer MCCBs for use up to 50°C without derating from 20A to 1600A
4. Circuit breaker with integral residual current protection (CBRs) [see page 13] We offer integrated protection from earth leakage faults, overloads and short-circuits in one device.
5. Direct opening action. The robust mechanism ensures that the force you apply to the toggle is transmitted directly to the contacts. Direct opening action is recommended by IEC 60204-1, Safety of Machinery: Electrical Equipment for Machinery
5 Reasons to Use TemBreak 2 MCCBs
*See T2ED on page 22
Previous 1000A MCCB
New 1000A MCCB
Moulded Case Circuit Breakers | 7
CUSTOMER ENDORSEMENT
“Terasaki Electric have supplied circuit breakers for a number of high resilience projects that we have designed, through the selected switchgear suppliers.
They have always provided excellent support to our projects and we have found them to be a good company to partner with on component supply; the selected products provided the ideal solution for our mission critical environments.
We have no hesitation in including Terasaki Electric devices in our designs.”
Karl Luck, WSP (Engineering Consultancy, UK)
Electronic Protection Including Types with Monitoring and Communication
Frame Reference Quantity Unit Condition TB2 S/H/L 250Model S250 S250 S250 H250Type NE GE PE NENumber of Poles 3,4 3,4 3,4 3,4Nominal current ratings In (A) 50°C 40,125,
160,250
40,125,
160,250
40,125,
160, 250
40,125,
160, 250Monitoring and Communication l l l lElectrical characteristicsRated Operational voltage Ue (V) AC 50/60 HZ 690 690 690 690 Rated insulation voltage Ui (V) 800 800 800 800Rated impulse withstand voltage Uimp (kV) 8 8 8 8Ultimate breaking capacity (IEC, JIS, AS/NZS)
Icu (kA) 690V AC 525V AC 440V AC
400/415V AC
220/240V AC
7.5 25 25
36
65
7.5 25 50
65
85
20 35 50
70
125
20 45 120
125
150 Service breaking capacity (IEC, JIS, AS/NZS)
Ics (kA) 690V AC 525V AC 440V AC
400/415V AC
220/240V AC
7.5 25 25
36
65
7.5 25 25
36
85
15 35 50
70
125
15 45 80
85
150 Rated breaking capacity (NEMA) (kA) 480V AC
240V AC25 65
25 65
35 125
45 150
Rated short-time withstand current Icw (kA) 0.3 sec – – – –
Utilisation category A A A ADimensions
Height (mm) 165 165 165 165Width (mm) 3 Pole 105 105 105 105
4 Pole 140 140 140 140Depth (mm) 103 103 103 103Weight (kg) 3 Pole 2.5 2.5 2.5 2.5
4 Pole 3.3 3.3 3.3 3.3OperationEndurance Electrical cycles 415V AC 10,000
Mechanical cycles 30,000
Electrical Characteristics to IEC 60947-2, EN 60947-2, JIS C 8201-2-1 ANN.1, AS/NZS IEC 20947-2, NEMA AB-1
8 | Moulded Case Circuit Breakers
Electronic overload protection is adjustable from 40% to 100% of rated current for ALL TemBreak 2 models.
Moulded Case Circuit Breakers | 9
TB2 H/L 400 TB2 E/S 630H400 L400 S400 S400 S400 E630 S630 S630NE NE NE GE PE NE CE GE3,4 3,4 3,4 3,4 3,4 3,4 3,4 3,4250, 400 250, 400 250,400 250,400 250,400 630 630 630
l l l l l l l l
690 690 690 690 690 690 1 690 1 690 1
800 800 800 800 800 800 800 8008 8 8 8 8 8 8 835 45 120
125
150
50 65 180
200
200
20 30 45
50
85
20 30 65
70
100
20 30 80
85
100
10 1 15 25
36
50
20 1 30 45
50
85
20 1 30 65
70
10035 45 80
85
150
50 65 135
150
150
15 30 45
50
85
15 30 50
50
85
15 30 80
85
85
10 1 15 25
36
50
15 1 30 45
50
85
15 1 30 50
50
85 45 150
65 200
25 85
30 100
30 100
15 50
25 85
30 100
5 5 5 5 5 – – –
B B B B B A A A
260 260 260 260 260 260 260 260
140 140 140 140 140 140 140 140185 185 185 185 185 185 185 185
140 140 103 103 103 103 103 1037.1 7.1 4.3 4.3 4.3 5.0 5.0 5.09.4 9.4 5.7 5.7 5.7 6.5 6.5 6.5
4,500 4,50015,000 15,000
Electronic overload protection is adjustable from 40% to 100% of rated current for ALL TemBreak 2 models.
Electronic Protection Including Types with Monitoring and Communication
Frame Reference Quantity Unit Condition TB2 H/L 800 TB2 1000Model H800 L800 S800 S800 S1000 S1000
Type NE NE NE RE SE NE
Number of Poles 3,4 3,4 3,4 3,4 3,4 3,4
Nominal current ratings In (A) 50°C 630,800 630,800 630,800 630,800 10008 10008
Monitoring and Communication l l l l l lElectrical characteristicsRated Operational voltage Ue (V) AC 50/60 HZ 690 690 690 690 690 690
Rated insulation voltage Ui (V) 800 800 800 800 800 800
Rated impulse withstand voltage Uimp (kV) 8 8 8 8 8 8
Ultimate breaking capacity (IEC, JIS, AS/NZS)
Icu (kA) 690V AC 525V AC 440V AC
400/415V AC
220/240V AC
251 40 125
125
150
251 45 180
200
200
201 30 50
50
85
251 35 65
70
100
201 30 45
50
85
251 45 65
70
100 Service breaking capacity (IEC, JIS, AS/NZS)
Ics (kA) 690V AC 525V AC 440V AC
400/415V AC
220/240V AC
201 34 94
94
150
201 34 135
150
150
201 30 50
50
85
201 30 50
50
75
151 23 34
38
65
201 34 50
50
75 Rated breaking capacity (NEMA) (kA) 480V AC
240V AC40 150
45 200
30 85
35 100
30 85
45 100
Rated short-time withstand current Icw (kA) 0.3 sec 10 10 10 10 – –
Utilisation category B B B B A A
DimensionsHeight (mm) 273 273 273 273 273 273
Width (mm) 3 Pole 210 210 210 210 210 210
4 Pole 280 280 280 280 280 280
Depth (mm) 140 140 103 103 103 103
Weight (kg) 3 Pole 6 6 4 4 11.0 11.0
4 Pole 7 7 5 5 14.8 14.8
OperationEndurance Electrical cycles 415V AC 4,000 4,000
Mechanical cycles 10,000 10,000– Not available • Optional 1 MCCB cannot be used in IT systems at this voltage 2100KA at 400V 375KA at 400V 48.7kg 630A, 9.1kg 800A 511.9kg 630A, 12.3kg 800A 613.3kg 630A, 14.8kg 800A 716.8kg 630A, 18.8kg 800A 8Not fully rated at 50oC. Contact Terasaki
10 | Moulded Case Circuit Breakers
Electronic overload protection is adjustable from 40% to 100% of rated current for ALL TemBreak 2 models.
Electrical Characteristics to IEC 60947-2, EN 60947-2, JIS C 8201-2-1 ANN.1, AS/NZS IEC 20947-2, NEMA AB-1
Moulded Case Circuit Breakers | 11
MCC
BS u
p to
320
0A a
re a
vaila
ble.
Con
tact
Ter
asak
i for
det
ails.
TB2 1250 TB2 1600S1250 S1250 S1250 S1600 S1600SE NE GE SE NE3,4 3,4 3,4 3,4 3,4800, 1250 800, 1250 800, 1250 1250, 1600 1250, 1600– – – – –
690 690 690 690 690800 800 800 800 8008 8 8 8 8201 30 45
50
85
251 45 65
70
100
451 65 85
100/852
125
201 30 45
50
85
451 65 85
100/852
125151 23 34
38
65
201 34 50
50
75
341 50 65
75/653
94
151 23 34
38
65
341 50 65
75/653
9430 85
45 100
65 125
30 85
65 125
15 15 15 20 20B B B B B
370 370 370 370 370210 210 210 210 210280 280 280 280 280120 120 120 140 14019.8 19.8 19.8 27.0 27.025.0 25.0 25.0 35.0 35.0
4,000 2,0005,000 5,000
– Not available • Optional 1 MCCB cannot be used in IT systems at this voltage 2100KA
at 400V 375KA at 400V 48.7kg 630A, 9.1kg 800A 511.9kg 630A, 12.3kg 800A 613.3kg 630A, 14.8kg 800A 716.8kg 630A, 18.8kg 800A
Electronic overload protection is adjustable from 40% to 100% of rated current for ALL TemBreak 2 models.
Adjustable Thermal and Adjustable Magnetic ProtectionElectrical Characteristics to IEC 60947-2, EN 60947-2, JIS C 8201-2-1 ANN.1, AS/NZS 3947-2, NEMA AB-1
12 | Moulded Case Circuit Breakers
Frame Reference Quantity Unit Condition TB2 S/H/L 250 TB2 E/S 630Model S250 H250 L250 E400 S400
Type RJ NJ NJ NJ CJ
Number of Poles 3,4 3,4 3,4 3,4 3,4
Nominal current ratings In (A) 50°C 160,250 160,250 160,250 250,400 250,400Electrical characteristicsRated Operational voltage Ue (V) AC 50/60 Hz
DC690 250
690 250
690 250
525 250
690 250
Rated insulation voltage Ui (V) 800 800 800 800 800
Rated impulse withstand voltage Uimp (kV) 8 8 8 8 8
Ultimate breaking capacity (IEC, JIS, AS/NZS)
Icu (kA) 690V AC 525V AC 440V AC 400/415V AC220/240V AC 250V DC
20 35 6565100 40
20 45 120125150 40
25 65 180200200 40
– 15 222535 25
15 22 303650 40
Service breaking capacity (IEC, JIS, AS/NZS)
Ics (kA) 690V AC 525V AC 440V AC 400/415V AC220/240V AC 250V DC
15 35 656510040
15 45 8085150 40
20 65 135150150 40
– 15 222535 19
15 22 303650 40
Rated breaking capacity (NEMA) (kA) 480V AC 240V AC
35 100
45 150
65 200
15 35
22 50
Utilisation category A A A A A
DimensionsHeight (mm) 165 165 165 260 260Width (mm) 3 Pole 105 105 105 140 140
4 Pole 140 140 140 185 185Depth (mm) 103 103 103 103 103Weight (kg) 3 Pole 2.4 2.4 2.4 4.2 4.3
4 Pole 3.2 3.2 3.2 5.6 5.6OperationEndurance Electrical cycles 415V AC 10,000
30,0004,500
Mechanical cycles 15,000 1 MCCB cannot be used in IT systems at this voltage *Applies only to 20A and 32A models – Not available
Frame Reference Quantity Unit Condition TB2 S125 TB2 S250Model S125 S125 S160 S160
Type NJ GJ NJ GJ
Number of Poles 3,4 3,4 3,4 3,4
Nominal current ratings In (A) 50°C 20,32,50,63,100,125
20,32,50,63,100,125
20,32,50,63,100,125,160
50,63,100,125,160
Electrical characteristicsRated Operational voltage Ue (V) AC 50/60 Hz
DC690 250
690 250
690 250
690 250
Rated insulation voltage Ui (V) 800 800 800 800
Rated impulse withstand voltage Uimp (kV) 8 8 8 8
Ultimate breaking capacity (IEC, JIS, AS/NZS)
Icu (kA) 690V AC 525V AC 440V AC 400/415V AC 220/240V AC 250V DC
6 22 253650 25
6 25 506585 40
7.5 (5*) 25(18*) 25(18*)36 (30*)65 (42*) 40 (30*)
7.5 25 506585 40
Service breaking capacity (IEC, JIS, AS/NZS)
Ics (kA) 690V AC 525V AC 440V AC 400/415V AC220/240V AC 250V DC
6 22 2536/3050 19
6 22 2536/3385 40
7.5 (5*) 25(18*) 25(18*)36 (25*)65 (35*) 40 (25*)
7.5 25 253685 40
Rated breaking capacity (NEMA) (kA) 480V AC 240V AC
22 50
25 85
22(18*) 65(42*)
25 85
Utilisation category A A A A
DimensionsHeight (mm) 155 155 165 165
Width (mm) 3 Pole 90 90 105 105
4 Pole 120 120 140 140
Depth (mm) 68 68 68 68
Weight (kg) 3 Pole 1.1 1.1 1.5 1.54 Pole 1.4 1.4 1.9 1.9
OperationEndurance Electrical cycles 415V AC 30,000 20,000
Mechanical cycles 30,000 30,000
Electrical Characteristics to IEC 60947-2, EN 60947-2, JIS C 8201-2-1 ANN.1, AS/NZS 3947-2, NEMA AB-1
Moulded Case Circuit Breakers | 13
TB2 E/S 630 TB2 1000S400 S400 S400 S800 S800 S800
NJ GJ PJ CJ NJ RJ3,4 3,4 3,4 3,4 3,4 3,4
250,400 250,400 250,400 630,800 630,800 630,800
690 250
690 250
690 250
690 250
690 250
690 250
800 800 800 800 800 800
8 8 8 8 8 82O 30 455085 40
20 30 6570100 40
20 30 8085100 40
101 151 303650 50
201 30 505085 50
251 45 6570100 50
15 30 455085 40
15 30 505085 40
15 30 808585 40
101 151 303650 50
201 30 505085 50
201 34 505075 50
25 85
30 100
30 100
15 50
30 85
65 200
A A A A A A
260 260 260 273 273 273
140 140 140 210 210 210
185 185 185 280 280 280
103 103 103 103 103 1034.2 4.2 4.2 8.5 8.5 8.55.6 5.6 5.6 11.5 11.5 11.5
4,500 4,000
15,000 10,000
TB2 S250 TB2 S/H/L 250S250 S250 S125 H125 L125 H160 L160
NJ GJ RJ NJ NJ NJ NJ3,4 3,4 3,4 3,4 3,4 3,4 3,4
160,200, 250
160,200, 250
20,32,50,63,100,125 160 160
690 250
690 250
690 250
690 250
690 250
690 250
690 250
800 800 800 800 800 800 800
8 8 8 8 8 8 87.5 25 253665 40
7.5 25 506585 40
20 35 6565100 40
20 45 120125150 40
25 65 180200200 40
20 45 120125150 40
25 65 180200200 40
7.5 25 253665 40
7.5 25 253685 40
15 35 6565100 40
15 45 8085150 40
20 65 135150150 40
15 45 8085150 40
20 65 135150150 40
22 65
25 85
35 100
45 150
65 200
45 150
65 200
A A A A A A A
165 165 165 165 165 165 165105 105 105 105 105 105 105140 140 140 140 140 140 140
68 68 103 103 103 103 1031.5 1.5 2.4 2.4 2.4 2.5 2.5
1.9 1.9 3.2 3.2 3.2 3.3 3.3
10,000 30,00030,000
20,00030,000 30,000
Thermal protection is adjustable from 63% to 100% of
rated current. We can supply MCCBs with thermal protection sealed and fixed at specific values (for example 40A,
80A,300A) by special request.
TemBreak 2 Lite Electrical Characteristics to IEC 60947-2, EN 60947-2, JIS C 8201-2-1 ANN.1, AS/NZS 3947-2, NEMA AB-1
14 | Moulded Case Circuit Breakers
Frame Reference Quantity Condition TB2 Lite 160Model E160 E160 E160 S160 S160Type SF SF SJ SCF SHFNumber of Poles 1 3,4 3,4 3,4 3,4Nominal current ratings In (A) 50°C 16,20,25,32,
40,50,63,80, 100,125
16,20,25,32, 40,50,63,80, 100,125,160
20,40,63,80, 100, 125,160
16,20,25,32, 40,50,63,80, 100,125,160
16,20,25,32, 40,50,63,80, 100,125,160
Electrical characteristicsRated Operational voltage Ue (V) AC 50/60 Hz DC 240
–525 250
525 250
525 250
525 250
Rated insulation voltage Ui (V) 690 690 690 690 690Rated impulse withstand voltage Uimp (kV) 8 8 8 8 8Ultimate breaking capacity (IEC, JIS, AS/NZS)
Icu (kA) 690V AC 525V AC 440V AC400/415V AC220/240V AC 250V DC
– – – – 25 –
– 6 10 16 25 13
– 6 10 16 25 13
– 7.5 15 25 35 20
– 7.5 7.5 25 35 20
Service Breaking Capacity (IEC, JIS, AS/NZS)
Ics (kA) 690V AC 525V AC 440V AC400/415V AC
220/240V AC 250V DC
– – – – 13 –
– 3 5 8 13 7
– 3 5 8 13 7
– 4 7.5 13 18 10
– 4 4 25 25 10
Rated breaking capacity (NEMA) (kA) 480V AC 240V AC
– 25
6 25
6 25
7.5 35
– –
ProtectionFixed Thermal, fixed magnetic q q – q qAdjustable thermal, fixed magnetic – – q – –Dimensions
Height (mm) 130 130 130 130 100Width (mm) 3 Pole (4 Pole) 25 (1P) 75, (100) 75, (100) 75, (100) 75, (100)Depth (mm) 68 68 68 68 68Weight (kg) 3 Pole (4 Pole) 0.3 (1P) 0.8 (1.0) 0.8 (1.0) 0.8 (1.0) 0.8 (1.0)
EnduranceElectrical 415V 10,000 10,0001
20,000Mechanical 20,000
– Not available q Standard 1 14,000<125A
Frame Reference Quantity Condition TB2 Lite 160Model S160 S160 S160 S160Type SCJ SHJ SF SJNumber of Poles 3, 4 3, 4 3, 4 3, 4Nominal current ratings In (A) 50°C 25,40,63,80,
100,125, 16025,40,63, 80,100, 125,160
16,20,25,32,40,50, 63,80,100,125,160
25,40,63,80, 100,125, 160
Electrical characteristicsRated Operational voltage Ue (V) AC 50/60 Hz DC 525
250525 250
690 250
690 250
Rated insulation voltage Ui (V) 690 690 690 690Rated impulse withstand voltage Uimp (kV) 8 8 8 8Ultimate breaking capacity (IEC, JIS, AS/NZS)
Icu (kA) 690V AC 525V AC 440V AC400/415V AC220/240V AC 250V DC
– 7.5 15 25 35 20
– 7.5 7.5 25 35 20
6 10 25 40 50 25
6 10 25 40 50 25
Service Breaking Capacity (IEC, JIS, AS/NZS)
Ics (kA) 690V AC 525V AC 440V AC400/415V AC
220/240V AC 250V DC
– 4 7.5 13 18 10
– 4 4 25 25 10
3 7.5 13 20 25 13
3 7.5 13 20 25 13
Rated breaking capacity (NEMA) (kA) 480V AC 240V AC 7.5 35
– _
10 50
10 50
ProtectionFixed Thermal, fixed magnetic – – q –Adjustable thermal, fixed magnetic q q – qDimensions
Height (mm) 130 130 130 130Width (mm) 3 Pole (4 Pole) 75, (100) 75, (100) 75, (100) 75, (100)Depth (mm) 68 68 68 68Weight (kg) 3 Pole (4 Pole) 0.8 (1.0) 0.8 (1.0) 0.8 (1.0) 0.8 (1.0)
EnduranceElectrical 415VMechanical– Not available q Standard 1 14,000<125A
Moulded Case Circuit Breakers | 15
Frame Reference Quantity Condition TB2 Lite 250Model E250 S250 S250Type SJ SF SJNumber of Poles 3, 4 3, 4 3, 4Nominal current ratings In 50°C 100,125, 160,
200,250125,150,175, 200,225,250
160,200,250
Electrical characteristicsRated Operational voltage UE (V) AC 50/60 Hz DC 525 250 690 250 690 250Rated insulation voltage Ui (V) 800 690 800Rated impulse withstand voltage Uimp (kV) 8 8 8Ultimate breaking capacity (IEC, JIS, AS/NZS)
Icu (kA) 690V AC 525V AC 440V AC400/415V AC220/240V AC 250V DC
– 7.5 15 25 35 15
4 10 30 40 85 25
4 10 30 40 85 25
Service Breaking Capacity (IEC, JIS, AS/NZS)
Ics (kA) 690V AC 525V AC 440V AC400/415V AC220/240V AC 250V DC
– 6 12 19 27 12
4 7.5 15 20 43 13
4 7.5 15 20 43 13
Rated breaking capacity (NEMA) (kA) 480V AC 240V AC
10 35
25 85
25 85
ProtectionFixed Thermal, fixed magnetic – q –Adjustable thermal, adjustable magnetic q – qDimensions
Height (mm) 165 165 165Width (mm) 3 Pole (4 Pole) 105 (140) 105 (140) 105 (140)Depth (mm) 68 68 68
Weight Weight (kg) 3 Pole (4 Pole) 1.5 (1.9) 1.5 (1.9) 1.5 (1.9)Endurance
Electrical 415VMechanical
– Not available q Standard 1 14,000<125A
Frame Reference Quantity Condition TB2 Lite 250Model E250 E250 E250Type SCF SCJ SFNumber of Poles 3, 4 3, 4 3, 4Nominal current ratings In 50°C 125,150,
175, 200, 225,250
100,125, 160, 200, 250
125,150, 175, 200, 225,250
Electrical characteristicsRated Operational voltage UE (V) AC 50/60 Hz DC 525 250 525 250 525 250Rated insulation voltage Ui (V) 690 800 690Rated impulse withstand voltage Uimp (kV) 8 8 8Ultimate breaking capacity (IEC, JIS, AS/NZS)
Icu (kA) 690V AC 525V AC 440V AC400/415V AC220/240V AC 250V DC
– 6 10 16 25 13
– 6 10 16 25 13
– 7.5 15 25 35 15
Service Breaking Capacity (IEC, JIS, AS/NZS)
Ics (kA) 690V AC 525V AC 440V AC
400/415V AC
220/240V AC 250V DC
– 3 5
8
13 7
– 3 5
8
13 7
– 6 12
19
27 12
Rated breaking capacity (NEMA) (kA) 480V AC 240V AC
6 25
6 25
10 35
ProtectionFixed Thermal, fixed magnetic q – qAdjustable thermal, adjustable magnetic – q –Dimensions
Height (mm) 165 165 165Width (mm) 3 Pole (4 Pole) 105 (140) 105 (140) 105 (140)Depth (mm) 68 68 68
Weight Weight (kg) 3 Pole (4 Pole) 1.5 (1.9) 1.5 (1.9) 1.5 (1.9)Endurance
Electrical 415V 6,000Mechanical 18,000
– Not available q Standard 1 14,000<125A
16 | Moulded Case Circuit Breakers
Circuit Breakers with Integral Residual Current Protection (CBR)
Electrical Characteristics to IEC 60947-1, IEC 60947-2, IEC 60947-2 ANNEXEB, IEC 60755
Frame Reference Quantity Unit Condition TB2 S125Model ZE125 ZS125 ZS125Type NJ NJ GJNumber of Poles 3,4 3,4 3,4Nominal current ratings In (A) 50°C 20,32,50,63,
100,12520,32,50,63, 100,125
20,32,50,63, 100,125
Electrical characteristicsRated Operational voltage Ue (V) AC 50/60 HZ 525 525 525Rated insulation voltage Ui (V) 525 525 525Rated impulse withstand voltage Uimp (kV) 8 8 8Ultimate breaking capacity (IEC, JIS, AS/NZS)
Icu (kA) 525V AC 440V AC400/415V AC 220/240V AC
8 152535
22 253650
25 506585
Service breaking capacity (IEC, JIS, AS/NZS)
Ics (kA) 525V AC 440V AC 400/415V AC220/240V AC
6 121927
22 2536/3050
22 2536/3385
ProtectionAdjustable thermal, fixed magnetic, residual/earth leakage
q q q
DimensionsHeight (mm) 155 155 155Width (mm) 3 Pole 90 90 90
4 Pole 120 120 120Depth (mm) 68 68 68Weight (kg) 3 Pole 1.1 1.1 1.1
4 Pole 1.4 1.4 1.4OperationEndurance Electrical cycles 415V AC 30,000
Mechanical cycles 30,000– Not available q Standard
Frame Reference Quantity Unit Condition TB2 S250Model ZE250 ZS250 ZS250Type NJ NJ GJNumber of Poles 3,4 3,4 3,4Nominal current ratings In (A) 50°C 160,250 160,250 160,250
Electrical characteristicsRated Operational voltage Ue (V) AC 50/60 HZ 525 525 525Rated insulation voltage Ui (V) 525 525 525Rated impulse withstand voltage Uimp (kV) 8 8 8Ultimate breaking capacity (IEC, JIS, AS/NZS)
Icu (kA) 525V AC 440V AC400/415V AC 220/240V AC
10 152535
25 253665
25 506585
Service breaking capacity (IEC, JIS, AS/NZS)
Ics (kA) 525V AC 440V AC 400/415V AC220/240V AC
7.5 121927
25 253665
25 253685
ProtectionAdjustable thermal, fixed magnetic, residual/earth leakage
q q q
DimensionsHeight (mm) 165 165 165Width (mm) 3 Pole 105 105 105
4 Pole 140 140 140Depth (mm) 68 68 68Weight (kg) 3 Pole 1.5 1.5 1.5
4 Pole 1.9 1.9 1.9OperationEndurance Electrical cycles 415V AC 10,000
10,000Mechanical cycles
– Not available q Standard
Moulded Case Circuit Breakers | 17
Circuit Breakers with Integral Residual Current Protection (CBR)
When CBR is used as the supply connection device and is set to 30 mA, RCBOs are not required on outgoing load circuits for electric shock protection (unless discrimination is required).The residual current protection provided by the supply connection device covers all load circuits. MCBs may be used to protect load circuits and the installation will still meet the requirements for electric shock protection “RCD”
How can a CBR give me a cost advantage?Integral CBR – “circuit breakers… which
incorporate the residual current function as an integrated feature”:IEC 60947-2 Annex B.In other words a CBR is a moulded-case
circuit breaker equivalent of a DIN-modular
RCBO – it includes overload, short-circuit
and residual current protection inside a
single device.
What is a CBR?
Moulded Case Circuit Breakers | 17
Residual current protection settings: 30mA, 100mA, 300mA, 500mA, 1000mA and 3000mA.
Moulded Case Products for Special Applications
High performance at the distribution voltages found in marine applications. Terasaki supply more switchgear to ships than any other manufacturer worldwide.
Circuit Breakers with Icu=70kA at 690V AC
Every frame size includes a switch-disconnector version without integral protection. Internal and external accessories are compatible with switch-disconnector versions.
Switch-Disconnectors
High AC voltages are used to minimise cable costs for installations where long cable runs are necessary. Terasaki supply MCCBs and switch-disconnectors for large solar farms, mines and railways. The latest addition to our range is the VE400-NE which can interrupt 30kA at 800V AC.
Circuit Breakers and Switch Disconnectors for 800V and 1000V AC
The available short-circuit output of generators is lower than typical transformers. Sometimes MCCBs with sensitive instantaneous protection are necessary for use with generators.
Low Instantaneous
We have developed special version of MCCBs to protect systems with DC voltages above 250V. Our range extends to 1000V DC and are often used to protect solar energy plants.
Circuit Breakers and Switch Disconnectors up to 1000V DC
18 | Moulded Case Circuit Breakers
MCCB Accessories
Moulded Case Circuit Breakers | 19
Terminal
Block
Neutral Link
Alarm Switches
Handle Lock
Auxiliary Contacts
Terminal Covers for front Connection
Terminal Covers for Rear Connection and Plug-in
Extension Bars
Rear Connections
Draw-out version
Din Rail Adaptor
Interpole Barriers
Door Flange
Slide Type Mechanical Interlock
Link Type Mechanical Interlock*
Wire Type Mechanical Interlock*
OCR Checker
Door Mounting Handle
Door Interlocking Handle
Motor Operator
Terminal Covers for Cable Clamps
Terminal temperature monitor and
alarm
Cable Clamps
Shunt Trip
UVT
*Compatible with motor operator or either handle.
Air Circuit Breakers
5 Reasons to use TemPower 2 ACBs
1. Arc flash risk reduction: Safe mode To minimise the damage that an arc flash can cause to a switchboard, the incoming circuit breaker must be set to detect and clear the arc fault within an optimum timeframe. Safe mode works by automatically implementing a temporary protection setting ‘maintenance mode’ within the incoming ACB before people can enter the switch room.
2. Arc flash risk reduction: Remote switching The TemPower 2 ACB can be configured for remote switching during maintenance. This system uses the principle that “distance is safety” and removes the operator from the proximity of the breaker being operated.
3. Fast interruption by unique “Double Break” system* The unique “DoubleBreak” main contact system ensures extremely fast interruption of short circuit currents and substantially reduces main contact wear. The internally symmetrical “DoubleBreak” structure means the moving contact is isolated from the supply voltage even when the ACB is reverse connected. TemPower 2 ACBs up to 4000A use DoubleBreak technology.
4. Easy Maintenance The unique design of TemPower 2 incorporates its isolating clusters and main contacts on the ACB body. The main contacts and isolating clusters may be maintained without having to isolate the switchboard.
5. Replacement of the main contacts* The fixed and moving contacts can easily be replaced in the field, thus prolonging the life on the circuit breaker. Changing each pole takes around 15 minutes. *Not available on AR6
CUSTOMER ENDORSEMENT
“The performance of Terasaki’s
ACBs was proven on site when
a main busbar failed in one of
the switchrooms. The ACB was
reclosed on the short-circuit
fault twice during fault diagnosis
and is still in operation following
a service by Terasaki.”
Andy Oswald, BAA (Airport Operating Company, UK)
20 | Air Circuit Breakers
Air Circuit Breakers Selection Guide
Frame Reference Quantity Unit Condition AR2 AR3 AR4 AR6ACB Model AR208, AR212,
AR216AR208, AR212, AR216, AR220
AR212, AR216, AR220
AR325, AR332
AR316,AR320,AR325,AR332
AR440 AR650, AR663
Type D S H S H SB SNumber of Poles 3, 4 3, 4 3, 4 3, 4 3, 4 3, 4 3, 4Nominal Current Ratings In A 800,1000,1250,
1600800,1000,1250, 1600,2000
1250,1600, 2000
2500,3200 1600,2000,2500,3200
4000 5000,6300
Electrical CharacteristicsRated Operational Voltage
Ue V 690 690 690 690 690 690 690
Rated Insulation Voltage
Ui V 1000 1000 1000 1000 1000 1000 1000
Rated Impulse Withstand Voltage
Uimp kV 12 12 12 12 12 12 12
Ultimate Breaking Capacity
Icu kA 690V AC 422 502 55 652 85 852 852
440V AC 50 65 80 85 100 100 120 400/415V AC 50 65 80 85 100 100 120 250V DC1 40 40 40 40 40 40 40Service Breaking Capacity
Ics kA 690V AC 322 502 55 652 85 852 852
440V AC 36 65 80 85 100 100 120 400/415V AC 36 65 80 85 100 100 120 250V DC1 40 40 40 40 40 40 40Making Capacity Icm kA 690V AC 882 1052 121 143 187 1872 1872
440V AC 105 143 176 187 220 220 264 400/415V AC 105 143 176 187 220 220 264Rated Short-time Withstand Current
Icw kA 1 Second 50 65 80 85 100 100 120
3 Seconds 36 50 55 65 75 75 85Breaking Time seconds 0.03 0.03 0.03 0.03 0.03 0.03 0.05Spring Charging Time seconds 10 10 10 10 10 10 10Closing Time seconds 0.08 0.08 0.08 0.08 0.08 0.08 0.08Utilisation Category B B B B B B BDimensionsFixed Type Height mm 460 460 460 460 460 – – Width mm 3 pole 360 360 360 466 466 – – Width mm 4 Pole 445 445 445 586 586 – – Depth mm 290 290 290 290 290 – – Weight kg 3 pole 53 54 54 80 80 Weight kg 4 Pole 59 60 60 92 92Drawout Type Height mm 460 460 460 460 460 460 460 Width mm 3 pole 354 354 354 460 460 460 799 Width mm 4 Pole 439 439 439 580 580 580 1034 Depth mm 345 345 345 345 345 345 380 Weight kg 3 pole
Drawout73 79 79 105 105 126 200
Weight kg 4 Pole Drawout
86 94 94 125 125 158 285
Endurance Mechanical Cycles With
maintenance26000 30000 300003 20000 20000 15000 10000
Mechanical Cycles Without maintenance
12500 15000 150003 10000 10000 8000 5000
Electrical Cycles Without maintenance at 440V AC
11000 12000 120003 7000 7000 3000 1000
Electrical Cycles With maintenance at 440V AC
26000 30000 300003 20000 20000 15000 10000
Notes1 Special versions are available for use at 600V and 800V DC. Contact us for details2 Not applicable in unearthed (IT) systems3 AR220S Mechanical Endurance: with maintenance - 25000 without maintenance - 12000 Electrical Endurance: with maintenance - 25000 without maintenance - 10000
TemPower 2 ACB
Air Circuit Breakers | 21
Protection Relay Guide
TemPower 2 ACBs for 800V, 1000V and 1150V AC
High AC voltages are used to minimise cable costs for installations where long cable runs are necessary. Terasaki supply ACBs for large solar farms, mines and railways. The latest additions to our range are the AR316H-V8, AR320H-V8, AR325H-V8, and AR332H-V8, which can all interrupt 30kA at 800V AC.
Protection Functions Dial Adjustment
L – Long TimeS – Short Time I – Instantaneous
Optional Protection Functions Unrestricted Ground Fault Neutral Protection
Manual Reset (option)AGR-11B-AS, AGR-11BL-GS
AGR-11B
Protection Functions LCD Ammeter
L – Long TimeS – Short Time I – Instantaneous Pre-Trip (load shedding) Fault Indication ContactsOptional Protection Functions Ground Fault (Unrestricted or Restricted) Neutral Protection Communication Phase Rotation Protection Generator Protection Curves IDMT Protection Curves Field Test
AGR-21B AGR-31B (H)
22 | Air Circuit Breakers
Non-Automatic (switch-disconnector) versions without protection are available in every frame size.
TemPower 2 AR332H-V8 ACB
Protection Functions Back-Lit Energy Analyser
L – Long TimeS – Short Time I – Instantaneous Pre-Trip (load shedding) Fault Indication ContactsHarmonic Monitoring Event History Dual Settings Capability
Optional Protection Functions Ground Fault (Unrestricted or Restricted) Neutral Protection Reverse Power Zone Interlocking 3C Overheating Protection Communication Generator Protection Curves Phase Rotation Protection IDMT Protection Curves Under/Over Frequency Under/Over Voltage Alarm
NEW
These features are now available on AGR-31B H
ACB Accessories
Air Circuit Breakers | 23
Position Switches
Open / Close Counter
IP55 Transparent Cover
UndervoltageTrip
Capacitor Shunt Trip 48V DC
Shunt Trip Closing Coil
IP3X Chassis Protection CoverLifting Plates
Fixing Bolts (For Draw Out ACBs)
Storage Draw Out Handle
Lifter Loader Protection Relay Checker
ShutterTruck
Step Down Transformer
440V to 220V
Mechanical Interlock, Key Interlock,
Castell Interlock
Auto Spring Discharge Device
Interpole Barriers
Trip Indicator SwitchSpring Status Switch
Motor Operator
Tropicalisation, Anti-Corrosion,
Cold Climate treatments
IP31 Door Flange
Auxiliary Switches
Retrofit Concept Retrofit Services
Retrofitting refers to the addition of new technology to older systems. Retrofit ACBs can replace ageing,
unsafe switches and circuit breakers.
Top 5 reasons to use Retrofit
1. Improve safety and functionality Modern circuit breakers offer safer interlocks, remote switching and circuit monitoring.
2 Optimise existing plant Static components in a switchboard (the steelwork and busbar system) can be retained. Only the functional, moving parts (the circuit breakers) are replaced. Retrofitting is typically 80% cheaper than switchboard replacement with minimum downtime.
3. Guaranteed spares availability Terasaki guarantee spare parts availability for at least 10 years after the withdrawal from sale of a circuit breaker.
4. Modernise the protection system Old protection relays can be removed and replaced with modern microprocessor protection which is integral to the ACB. It is then easier to interface the ACB with automatic plc controls.
5. Reduce arc flash hazard Modern ACBs clear short-circuits much faster than older types. This means that the incident arc energy is correspondingly lower.
Verified DesignsThird Party Technical Report.
Tested to current standardASTA tested to IEC 61439 for short-circuit withstand (lcw)GEC MPact Ellison English Electric
Low voltage arc hazard reduction1. Remove switching
using umbilical cord controller
2. Faster opening time reduces incident arc energy. TemPower 2 ACB can be set to open a short-circuit in less than 30 milliseconds (typically at least twice as fast as the device it will replace).
Modern protectionThe AGR Protection relay can replace the functions of several devices in an existing switchboard to provide:• restricted earth fault
protection• overcurrent protection• data communication
to BMS or SCADA• plc control
Terasaki’s Retrofit Services
We prefer to conduct a site survey for every retrofit project - even if the breaker to be replaced is already on our design database. This ensures that the installation is as quick as possible, with minimum disruption to the client’s supply.
Mechanical and electrical interfaces are modelled using state-of-the-art 3-D CAD.
Manufacture, assembly and routine testing is carried out at Terasaki’s facility in Glasgow, Scotland. The factory and processes are certified to the ISO 9001 quality management standard.
Some of our Retrofit designs can be installed without a shutdown. Where this is not possible, our team will ensure that disruption is minimised.
24 | Retrofit
We design retrofit ACBs on request. If you are interested in a brand which is not shown below we would be happy to examine it. New designs are continually added to our portfolio. Check the latest list on the Terasaki website: www.terasaki.co.uk
• Terasaki• Ellison• GEC• Merlin Gerin• Siemens• Unelec• Square D• Schneider
• Mitsubishi• Sace• ABB• Hyundai• AEG• English Electric• MEM• Klockner Moeller• GE Electric
Retrofit ServicesRetrofit Services
The main electrical incomer to Royal Bank of Canada’s UK headquarters in London was tripping spuriously and engineers became worried that a sudden and complete failure of the power supply could result. The faulty device, a Merlin Gerin DA 4000 ACB, was obsolete and irreparable. 26 other Selpact and DA 4000 ACBs in the switchboard were also obsolete.
Engineers had permission to shut down the main power supply for only one weekend – not long enough for the switchboard to be replaced or for any modifications to be made to the copperwork.
Terasaki’s Direct Response Service Division had what they needed: a retrofit solution. The Terasaki TemPower 2 retrofit ACBs were designed to match the connections and mountings of the existing ACBs exactly. There was no need to modify the switchboard and all 27 ACBs were replaced safely and quickly.
REPLACEMENT OF 27 MERLIN GERIN ACBSWITH TERASAKI ACBs
Retrofit | 25
Terasaki Retrofit Project Reference
Retrofit Details
• Merlin Gerin DA 4000 x 3
• Merlin Gerin Selpact x 24
• Building power down: 10:00 Friday
• 27 Terasaki TemPower 2 retrofit ACBs installed
• Building re-energised 12:00 Sunday
Retrofit Case Study
Direct Response Engineer Installing Retrofit ACB
DA 4000 ACB: Access Restricted Due to Nuisance Tripping
Spares Policy(Circuit Breakers) Warranty Extension
Terasaki guarantees availability of breaker spare parts for at least 10 years after the breaker’s withdrawal from sale. Beyond that period the Direct Response Service Division will continue to support older products in the field carrying out routine maintenance and repairs on-site.
The Direct Response Service Division can provide a recommended spares list, based on the specification of all breakers on site. We usually recommend a combination of “complete” and “component” spares.
Terasaki offers one year standard warranty for our breakers. However you can extend it up to 4 or 5 years depending on project requirements.
Client: Royal Bank of Canada
Project: Retrofit
Location: 71 Queen Victoria Street, London
Retrofit 24 x Merlin Gerin Selpact 1000A 3 x Merlin Gerin DA 4000A
Type: to TemPower 2
Capability:
• 27 circuit breakers replace by TemPower 2 retrofit ACBs
• Only one week-end shutdown
• No disturbance to switchboard or copperwork
• Safe and fast
Obsolete Merlin Gerin Selpact ACBs
Other Services
Advanced External Display and Protection Products
Special Features:View circuit values and breakers data safely from the outside• Easy direct connection from breaker to T2ED
(no need for communication module)• Easy direct connection from T2ED to Modbus
(no need for communication module)• Analogue, numerical and bar graph views
Technical Characteristics:• Rated voltage: DC24V (Applicable range of voltage:
DC18 to DC 31V)• Consumption (at DC24V): 50mA• Dimensions• (96 x 96 x 50) mm• Serial Interface: RS485• Protocol: Modbus-RTU• Transmission method: Two-wire half duplex
Monitoring and Communication: T2ED
T2ED is a new Terasaki external display for TemPower 2 ACBs and TemBreak 2 MCCBs. It displays circuit measurements and information about the installed breaker in an easily readable way. T2ED may be used as a stand-alone local display.T2ED is also able to transfer all this information directly to a Modbus network.
Multi-Protection Relay: TemTrip 2
TemTrip2 is a multi-protection relay for medium or low voltage circuit breakers that is capable of
indicating via LEDs that the load current is picked up or the breaker trips open and showing various
information including the phase current, line voltage and fault current on the LCD.
The relay is available in three types: for generator protection, feeder circuit protection and transformer protection.
PRR-1H-G PRR-1H-F PRR-1H-T
Generator protection Feeder circuit Transformer protec-tion
Adjustable long time-delay trip LT m m m
Adjustable short time-delay trip ST m m m
Adjustable instantaneous trip INST m m m
Adjustable undervoltage trip UV(27) m u –
Adjustable overvoltage trip OV(59) m u –
Adjustable reverse power trip RP(67R) m – –
Adjustable ground fault trip
Overvoltage ground OVGR(64) m m m
Directional ground DGR(67G) m m m
Ratio differential trip DIFF(87G) m – – (87T) – – m
Pre-trip alarm (PTA) m m m
PTA2 m – –
m Standard uOptional
Special Features:• Multi-protection• Ground fault
detection via zero-phase voltage
• Directional ground fault detection
• Ratio differential characteristic
• Reverse power trip• Readout of trip/
alarm cause• Internal clock• Self-diagnostic
Host Network / Commercial Gateway
Address 1 Address 2 Address 3 Address 127
T2ED
26 | Advanced External Display and Protection Products
TemContact 2 Contactors
TemContact 2 is a range of magnetic contactors and thermal overload relays. Current ratings from 6A to 800A are available in 9 frame sizes and in 3 or 4 pole versions.
TemContact 2 has upgraded insulation voltage (increased from 690 to 1000V AC) impulse withstand voltage (increased from 6 to 8kV) in contactors over 40A.
Optional Accessories:
• Auxiliary contacts
• Surge absorption unit
• Reversing connection kit
• Mechanical interlock
• Safety cover for front of mechanism
• Overload relays
• Remote mounting kit for overload relay
• Pre-loading resistors for capacitor switching (Any TemContact 2 Contactor can be converted to capacitor duty by adding capacitor unit)
• Mechanical latch
• Remote reset device for overload relays
TemContact 2 Manual Motor Starters
TemContact 2 Manual Motor Starters have integrated short-circuit and overload protection for motors of up to 45kW at 400V AC.
There are three frame sizes, each with three versions which cover the range:
• TMS32S, TMS63S, TMS100S – standard short-circuit performance
• TMS32H, TMS63H, TMS100H – high short-circuit performance
• TMS32HI, TMS63HI, TMS100HI – high short-circuit performance, without overload protection
Optional Accessories:
• Auxiliary switches for front- and side-mounting
• Alarm switches
• Shunt trip
• Undervoltage Trip
• Direct connection adapter for TemContact 2 contactors up to 100A
Contactors and Manual Motor Starters
26 | Advanced External Display and Protection ProductsContactors and Manual Motor Starters | 27
Contactor Selection Guide 3P
TK Type Thermal Overload relays
Model Parameter Unit TC-9b TC-12b TC-18b TC-22b TC-32a TC-40a TC-50a TC-65a
Frame size 22 AF 40 AF 65 AF
Current and power ratings
Thermal current AC1 A 25 25 40 40 50 60 70 100
Switching power 200/240V AC3 kW 2.5 3.5 4.5 5.5 7.5 11 15 18.5
Switching current 200/240V AC3 A 11 13 18 22 32 40 55 65
Switching power 380/440V AC3 kW 4 5.5 7.5 11 15 18.5 22 30
Switching current 380/440V AC3 A 9 12 18 22 32 40 50 65
Switching power 500/550 AC3 kW 4 7.5 7.5 15 18.5 22 30 33
Switching current 500/550 AC3 A 7 12 13 20 28 32 43 60
Switching power 690V AC3 kW 4 7.5 7.5 15 18.5 22 30 33
Switching current 690V AC3 A 6 9 9 18 20 23 28 35
Electrical characteristics
Rated operational voltage Ue V 690 690 690
Rated insulation voltage Ui V 690 1000 1000
Rated frequency f Hz 50/60 50/60 50/60
Rated impulse withstand voltage Uimp kV 6 8 8
Operation
Maximum operating rateEndurance
AC3 ops/hr 1800 1800 1800
Mechanical million 15 15 12
Electrical million 2.5 2.5 2
Dimensions
AC Control Weight kg 0.34 0.55 1.05
Size (WxHxD) mm 45 x 73.5 x 86 69 x 83 x 93 79 x 106 x 119
DC Control Weight kg 0.51 0.77 1.3
Size (WxHxD) mm 45 x 73.5 x 104 69 x 83 x 120 79 x 106 x 147
NEMA size 00 00 0 1 1 1 2 2
Auxiliary Contacts
Auxiliary Contacts (included as Standard)
1N0 1NC 2N0 2NC 2N0 2NC
Model Parameter Unit TK-32 TK-32 TK-63
Electrical Characteristics
Rated operational voltage, Ue V 690 690 690
Rated insulation voltage Ui V 690 690 690
Rated impulse withstand voltage Uimp kV 6 6 6
Setting range
Setting range A 0.1~40 0.1~40 4~65
Trip class 10A,20 10A,20 10A,20
Dimensions
Weight kg 0.17 0.17 0.31/0.33
Size (WxHxD) mm 45 x 75 x 90 45 x 75 x 90 55 x 81 x 100
28 | Contactors and Manual Motor Starters
TC-75a TC-85a TC-100a TC-130a TC-150a TC-185a TC-225a TC-265a TC-330a TC-400a TC-500a TC-630a TC-800a
100 AF 150 AF 225 AF 400 AF 800 AF
110 135 160 160 210 230 275 300 350 450 580 660 900
22 25 30 37 45 55 75 80 90 125 147 190 220
75 85 105 130 150 185 225 265 330 400 500 630 800
37 45 55 60 75 90 132 147 160 200 265 330 440
75 85 105 130 150 185 225 265 330 400 500 630 800
37 45 55 60 70 110 132 147 160 225 265 330 500
64 75 85 90 100 180 200 225 280 350 400 500 720
37 45 55 55 55 110 140 160 200 250 300 400 500
42 45 65 60 60 120 150 185 225 300 380 420 630
690 690 690 690 690
1000 1000 1000 1000 1000
50/60 50/60 50/60 50/60 50/60
8 8 8 8 8
1800 1200 1200 1200 1200
12 5 5 5 2.5 2.5
2 1 1 1 0.5 0.5
1.9 2.4 5.4 9.2 22.4
94 x 140 x 137 119 x 158 x 132 138 x 203 x 185 163 x 243 x 205 285 x 312 x 245
2.8 2.3 5.4 9.2 22.4
94 x 140 x 172.3 119 x 158.5 x 132 138 x 203 x 185 163 x 243 x 205 285 x 312 x 245
2 3 3 3 4 4 4 5 5 5 6 6 7
2N0 2NC 2N0 2NC 2N0 2NC 2N0 2NC 2N0 2NC
TK-95 TK-150 TK-225 TK-400 TK-800
690 690 690 690 690
690 690 690 690 690
6 6 6 6 6
7~100 34~150 64~240 85~400 200~800A
10A,20 10A,20 10A,20 10A,20 10A,20
0.48/0.5 0.67 2.5 2.6 11.5
70 x 97 x 110 95 x 109 x 113 147 x 141 x 184 151 x 171 x 198 860 x 530 x 212
Contactors and Manual Motor Starters | 29
Contactor Selection Guide 4P
TK Type Thermal Overload relays
Model Parameter Unit TC-6a/4 TC-9a/4 TC-12a/4 TC-18a/4 TC-22a/4 TC-32a/4 TC-40a/4 TC-50a/4 TC-65a/4 TC-75a/4 TC-85a/4
Frame size 18 AF 22 AF 40 AF 85 AF
Current and power ratings
Thermal current A 25 25 25 40 40 50 60 80 100 110 135
Switching power 200/240V AC1 kW 9 9 9 15 15 18 22 30 37 41 51
Switching current 200/240V AC1 A 25 25 25 40 40 50 60 80 100 110 135
Switching power 380/440V AC1 kW 17 17 17 27 27 35 42 56 70 76 95
Switching current 380/440V AC1 A 25 25 25 40 40 50 60 80 100 110 135
Switching power 200/240V AC3 kW 2.2 2.5 3.5 4.5 5.5 7.5 11 15 18.5 22 25
Switching current 200/240V AC3 A 9 11 13 18 22 32 40 55 65 75 85
Switching power 380/440V AC3 kW 3 4 5.5 7.5 11 15 18.5 22 30 37 45
Switching current 380/440V AC3 A 7 9 12 18 22 32 40 50 65 75 85
Electrical characteristics
Rated operational voltage
Ue V 690 690 690 690
Rated insulation voltage
Ui V 690 690 690 1000
Rated frequency f Hz 50/60 50/60 50/60 50/60
Rated impulse withstand voltage
Uimp kV 6 6 6 8
Operation
Maximum operating rateEndurance
AC3 ops/hr 1800 1800 1800 1800
Mechanical million 15 15 15 12
Electrical million 2.5 1 1 1
Dimensions
AC Control Weight kg 0.33 0.4 0.59 1.2
Size (WxHxD) mm 45 x 73.5 x 82 47.2 x 80 x 86.8
59 x 83.5 x 94.5 91 x 123.5 x 117.8
DC Control Weight kg 0.5 0.5 0.7 1.29
Size (WxHxD) mm 45 x 73.5 x 97 47.2 x 80 x
113.2
59 x 83.5 x 121 91 x 123.5 x 117.8
NEMA size 00 00 0 0 1 1 1 2 2 2 3
Aux Contacts
Aux Contacts (Standard)
– – – –
30 | Contactors and Manual Motor Starters
Capacitor Unit
Capacitor Unit is connected to the terminals of the contactor to reduce the high inrush current.
Features of the Capacitor Unit (Pre-loading resistor):• Damping resistor than can limit the inrush current up to 60 x In is connector to the mechanism that
closed earlier than the main contact of the contactor• No heat loss by the serial resistor• Eliminate the switching surge• Improving the performance of the capacitor system
TC-100/4 TC-130a/4 TC-150a/4 TC-185a/4 TC-225a/4 TC-265a/4 TC-330a/4 TC-400a/4 TC-500a/4 TC-630a/4 TC-800a/4
225 AF 400 AF 800 AF
160 165 250 300 330 360 420 500 650 750 900
57 60 76 87 100 115 135 160 245 255 310
150 155 200 230 260 300 350 420 630 660 800
106 110 142 165 185 215 250 300 450 470 570
150 155 200 230 260 300 350 420 630 660 800
30 37 95 55 75 80 90 125 147 190 220
105 125 150 185 225 265 330 400 500 630 800
55 60 75 90 132 147 160 200 265 330 440
105 120 150 185 225 265 330 400 500 630 800
690 690 690
1000 1000 1000
50/60 50/60 50/60
8 8 8
1200 1200 1200
15 15 12
0.8 0.5 2.5
5.6 9.9 26.3
175 x 203 x 185
206 x 243 x 205 346 x 310 x 244
5.6 9.9 26.3
175 x 203 x 185
206 x 243 x 205 346 x 310 x 244
3 3 4 4 4 5 5 5 6 6 7
2N02NC 2N02NC 2N02NC
Contactors and Manual Motor Starters | 31
Capacitor Unit
Operation Sequence:
Capacitor unit: OFFContactor: OFF
Capacitor unit
Contactor
Capacitor unit: ONContactor: OFF
Capacitor unit
Contactor
Capacitor unit: OFFContactor: ON
Capacitor unit
Contactor
Manual Motor Starters Selection GuideIn accordance with IEC 60947 - 2 & IEC 60947 - 4 - 1Manual Motor StartersModel Parameter Unit Power rating
at 400V AC (kW)
TMS -32S TMS -32H TMS -32HI*
Breaking Capacity @ 400/415V AC Icu / Ics (kA) TMS -32S
Breaking Capacity @ 400/415V AC Icu / Ics (kA) TMS -32H/HI
TMS -63S TMS -63H TMS -63HI*
Breaking Capacity @ 400/415V AC Icu / Ics (kA) TMS -63S
Breaking Capacity @ 400/415V AC Icu/Ics (kA) TMS -63H/HI
TMS -100S TMS -100H TMS -100HI*
Breaking Capacity @ 400/415V AC Icu / Ics (kA) TMS -100S
Breaking Capacity @ 400/415V AC Icu / Ics (kA) TMS -100H/HI
Number of poles 3 3 3
Frame size 32AF 63AF 100AF
Current and Power
Rated operational current Ie (A) 0.02 0.1 ~ 0.16 100/100 100/100
(underlined) and 0.06 0.16 ~ 0.25 100/100 100/100
protection setting range 0.09 0.25 ~ 0.4 100/100 100/100
0.12 0.4 ~ 0.63 100/100 100/100
0.25 0.63 ~ 1.0 100/100 100/100
0.55 1.0 ~ 1.6 100/100 100/100
0.75 1.6 ~ 2.5 100/100 100/100
1.5 2.5 ~ 4 100/100 100/100
2.2 4 ~ 6 100/100 100/100
3 5 ~ 8 100/100 100/100
4 6 ~ 10 50/38 100/100 6 ~ 10 100/100 100/100
5.5 9 ~ 13 50/38 100/100 9 ~ 13 50/38 100/100
7.5 11 ~ 17 20/15 50/38 11 ~ 17 25/19 50/50 11 ~ 17 50/38 100/100
7.5 14 ~ 22 15/11 50/38 14 ~ 22 25/19 50/50 14 ~ 22 50/38 100/50
11 18 ~ 26 15/11 50/38 18 ~ 26 25/19 50/50 18 ~ 26 50/38 100/50
15 22 ~ 32 15/11 50/38 22 ~ 32 25/19 50/50 22 ~ 32 50/38 100/50
18.5 28 ~ 40 10/8 40/30 28 ~ 40 25/19 50/50 28 ~ 40 50/38 100/50
22 34 ~ 50 25/19 50/50 34 ~ 50 50/38 100/50
30 45 ~ 63 25/19 50/50 45 ~ 63 50/38 100/50
30 47 ~ 65 25/19 35/27
37 55 ~ 75 50/38 75/50
45 70 ~ 90 50/38 75/50
45 80 ~ 100 50/38 75/50
Electrical Characteristics
Rated operational voltage Ue V 690 690 690
Rated insulation voltage Ui V 690 690 1000
Rated frequency f Hz 50/60 50/60 50/60
Rated impulse withstand Uimp kV 6 8 8
Utilisation category IEC 60 947 - 2 (Breaker) Cat. A Cat. A Cat. A
IEC 60 947 - 4 (Motor Starter) AC 3 AC 3 AC 3
Protection
Thermal magnetic (Except HI = Magnetic only)
Operation
Endurance Mechanical 100,000 50,000 50,000
Electrical 100,000 25,000 25,000
Max operating frequency per hour
25 25 25
Weight g 320 360 1000
Handle Type Rocker Rotary Rotary Rotary
Terminal Screw Lug Lug
Accessories
Optional ( auxiliary , alarm contacts) yes yes yes
* TMS-**HI models have no overload protection or protection setting range. Rated operational current, Ie, (underlined) applies to TMS-**HI models
32 | Contactors and Manual Motor Starters
DIN Modular Protection | 33Automatic Transfer Controller & Earth Leakage Protection | 33
Automatic Transfer Controller
Terasaki TemProtect monitoring and control devices provide earth leakage protection and monitoring for most industrial and
commercial applications. They are used to monitor earth currents to protect electrical equipment and personnel against dangers such
as electric faults.
TemProtect has been designed to be as flexible as possible to suit a wide range of applications. The range includes Din Rail, Panel or
base mount versions, relays suitable for use in AC systems (unaffected by DC components which may be present).
All relays comply with international standards including IEC 60255.
• Adjustable tripping current and time delay setting
• Selectable automatic or manual reset facility
• Adjustable time/current multiplier setting
• Test button
• LEDs to indicate the units status
ELR-1E ELRC-1 ELR-3C CTM
Flush mounted DIN96x96x60mm unit
Relay with built-in Toroidal Transformer
Space Saving
DIN rail mounted unit (DIN 43880 standard)
the three modules width 17.5mm
Supervision Relay monitors circuit
breakers tripping circuit
Earth Leakage Protection Relays
TemTransfer 3 Automatic Changeover Controller for TemPower 2 ACBs, TemBreak 2 MCCBs and TemContact 2 Contactors TemTransfer 3 is an Automatic Transfer Switch Controller. The TemTransfer 3 will monitor the voltage and frequency of the AC supply from two different sources, which could be from both generator or mains (utility), or a combination of both.
The module will monitor S1 (source 1) and in the event of a failure will issue a start command to S2 (source 2).
The controller (ACC) is designed to monitor the incoming AC mains supply (1 or 3 phases) for under/over voltage and under/over frequency. Should any of the parameters fall out of limit, the module will issue a changeover command. Once the supply is available and producing an output within limits, TemTransfer 3 will control the circuit breaker or contactor and switch the load from Source 1 or Source 2
Source 1
Schematic Diagram: Automatic Changeover with TemTransfer 3 and TemBreak 2 Interlocked MCCBs
Source 2STATUS STATUS
STATUS ON/OFF
START
Residual Current deviceand Monitor Type B
ELR-3B
NEW
34 | DIN Modular Protection
Accessories
Din Modular Protection
Safety and protection are the prime purposes of Terasaki products. Our range of DIN modular Protection products covers ratings from 0.5A to 125A and includes:
- Circuit breakers for overload and short-circuit protection,
- Residual current devices for the prevention of electric shock and fires,
- Circuit breakers combining overload, short-circuit and residual current protection.
With more than 500 items in the range, there is a solution for most applications.
A Auxiliary contact 1NO, 1NC. 6A, 230V AC. Not suitable for TD3RCCB
B Alarm contact, 1NO, 1NC. 6A, 230V AC. Not suitable for TD3RCCB
C RCCB switch. Combined auxiliary contact (1NO, 1NC, 6A, 230V AC) + Alarm contact (1NO, 1NC, 6A, 230V AC)
D Shunt trip. RCCB switch (C) must be fitted before fitting the shunt trip to the TD3RCCB
E Undervoltage trip. RCCB switch (C) must be fitted before fitting the shunt trip to the TD3RCCB
F Overvoltage trip. Rated voltage, Un, 230V AC. Opens the circuit breaker if supply voltage exceeds 280V AC. RCCB switch (C) must be fitted before fitting the shunt trip to the TD3RCCB
G Padlock. Suitable for TD3 M06, M10, XA (open and closed) and for TD31P1M (in open position only)
H Residual current block for TD3 M06 and M10
I Rotary handle for TD3 ICP
A B C D E F G H I
34 | Din Modular Protection
Automatic Transfer Controller | 35
Din Modular Protection Selection Guide
Din Modular Protection | 35
Miniature Circuit Breakers Type MCB MCB MCB MCB MCB
Model Quantity Unit TD3 M06 TD3 M15 TD3 1P1M TD3 XA TD3 ICP
Poles (Modules) 1 (1), 2 (2),
3 (3), 4 (4)
1 (1), 2 (2),
3 (3), 4 (4)
1+N (1) 1 (1.5), 2 (3), 3 (4.5),
4 (6)
1 (1), 2 (2), 3 (3), 4 (4)
Electrical Characteristics
Standard IEC/EN 60898 IEC/EN 60898
IEC/EN 60947-2
IEC/EN 60898 IEC/EN 60898
IEC/EN 60947-2
UNE EN 20317
Nominal Rated Current In A 6, 10, 16, 20, 25, 32, 40,
50, 63
0.5*, 1*, 2*, 3*, 4*, 6, 10,
13**,16, 20, 25, 32, 40,
50, 63
6, 10, 16, 20, 25, 32, 40 80, 100, 125 5, 7.5, 10, 15, 20, 25, 30, 35, 40,
45, 50, 63
Rated Voltage Ue V 230/400 - 240/415 230/400 - 240/415 230/400 - 240/415 230/400 - 240/415 230/400 - 240/415
Rated Frequency Hz 50/60 50/60 50/60 50/60 50/60
Breaking Capacity 60898-1 Icn (Icu) kA 6 10 6 10 (10) 6
Breaking Capacity 60947-2 Icn (Icu) kA - 15 (7.5) - - -
Protection
Thermal- Magnetic Characteristic Type B, C B, C, D B, C C, D UNE EN 20317
Connection
Rigid Conductor Terminal mm2 25 35 16 70 25
Flexible Conductor Size 16 25 10 35 16
Dimensions
Per Module HxDxW mm 85 x 74 x 17.5 84 x 74 x 17.5 84 x 74 x 17.5 90 x 72 x 26.5 85 x 74 x 17.5
*Only for “D” type ** Only for “C” type
Residual Current Devices and Modular SwitchesType RCCB RCCB RCBO RCBO Modular Switch
Model Quantity Unit TD3 RCCB TD3 RCCB TD3 RCBO TD3 RCBO TD3 MS
Poles (Modules) 2 (2) 4 (4) 1+N (1) 1+N (2) 1 (1), 2 (2), 3 (3), 4 (4)
Electrical Characteristics
Standard IEC/EN 61008 IEC/EN 61008 IEC/EN 61009 IEC/EN 61009 IEC EN 60947-3
Rated Sensitivity (I n) mA 30 100 300 30 100 300 30 30 300
Nominal Rated Current In A AC
type
25, 40,
63, 100
40,
63
25, 40,
63
25, 40,
63, 80,
100
63,
100
25, 40,
63, 80,
100
6 - 40 6 - 40 6 - 40 32 63 100 125
In A A
type
25, 40,
63
– – 40,
100
– – – 6 - 40 – –
In A S
type
– – – – – 40, 100 – – – –
In A Ai
type
25, 40,
63
– – 40 – – – – – –
In A S
type
– – 40, 63 – – 40, 100 – – – –
In A B
type
– – – 40, 63 – – – – – –
Rated Voltage Un V 230/ 400 - 240/ 415 230/400 - 240/415 230 - 240 230 - 240 230/400 - 240/415
Breaking Capacity Icn (Im) (1.5) (1.5) 10 6 – – – –
Energy Withstand (EN 61008) I2t kA2s > 22.5 > 22.5 – – – – – –
Peak Current Withstand (EN 61008) I peak kA > 3.3 > 3.3 – – – – – –
Short-circuit Withstand
Capacity
Icw (rms) kA – – – – 0.48 0.94 1.2 1.5
Rated Frequency Hz 50 50 50/60 50 50/60
Protection
Thermal-Magnetic Characteristic Type – – B, C C – – – –
Connection
Rigid Conductor Terminal mm2 25 25 16 25 25 50 50 50
Flexible Conductor Size mm2 16 16 10 16 16 35 35 35
Dimensions
Per module H x D x W mm 87.5 x 71 x 17.5 87.5 x 71 x 17.5 115 x 72 x 17.5 85.4 x 72 x 17.5 83 x 72 x 17.5
NEW
Type BRCCB
CAT REF. 20-G00EU©Copyright Terasaki Electric (Europe) Ltd 2020
Ratings and specifications are subject to change without notice.
www.terasaki.com
TERASAKI ELECTRIC (EUROPE) LTD. 80 Beardmore Way, Clydebank Industrial Estate, Clydebank, Glasgow, G81 4HT, Scotland (UK) Telephone: 44-141-941-1940 Fax: 44-141-952-9246Email: marketing@terasaki.co.uk
http://www.terasaki.com
TERASAKI MIDDLE EAST Saif Zone Q3-168, PO Box 120860 Sharjah, UAE Telephone: 971-56-676-4825 Fax: 976-655-78141Email: middleeast@terasaki.co.uk
http://www.terasaki.com
TERASAKI ELECTRIC (EUROPE) LTD. (FILIALE ITALIA) Via Ambrosoli, 4A-20090, Rodano, Milano, Italy Telephone: 39-02-92278300 Fax: 39-02-92278320Email: info@terasaki.it
http://www.terasaki.it
TERASAKI ELECTRIC (EUROPE) LTD. (SUCURSAL EN ESPAÑA) Pol. Ind. Coll de la Manya, C/Cal Ros dels Ocells 5 08403 Granollers , (Barcelona) España Telephone: 34-93-879-60-50 Fax: 34-93-870-39-05Email: terasaki@terasaki.es
http://www.terasaki.es
TERASAKI ELECTRIC (EUROPE) LTD. (FILIAL SVERIGE) Snickarvägen 2, SE-132 38 SALTSJÖ-BOO, Sweden Telephone: 46-8-556-282-30 Fax: 46-8-556-282-39Email: info@terasaki.se
http://www.terasaki.se
TERASAKI CIRCUIT BREAKERS (S) PTD. LTD. 17 Tuas Street, Singapore, 638454 Telephone: 65-6744-9752 Fax: 65-6748-7592 Email: tecs@pacific.net.sg
TERASAKI ELECTRIC CO., LTD. Head Office & Circuit Breaker Division6-13-47 Kamihigashi, Hirano-ku,Osaka 547-0002, JapanTelephone: 81-6-6791-2763
Fax: 81-6-6791-2732Email: int-sales@terasaki.co.jp
http://www.terasaki.co.jp
TERASAKI ELECTRIC (M) SDN, BHD. Lot 3, Jalan 16/13D, 40000 Shah Alam, Selangor Darul Ehsan, Malaysia Telephone: 60-3-5549-3820 Fax: 60-3-5549-3960 Email: terasaki@terasaki.com.my
Fax: 55-21-3301-9861Email: terasaki@terasaki.com.br
http://www.terasaki.com.br
TERASAKI ELECTRIC (CHINA) LTD. 72 Pacific Industrial Park, Xin Tang Zengcheng, Guangzhou 511340, China Telephone: 86-20-8270-8556 Fax: 86-20-8270-8586 Email: terasaki@public.guangzhou.gd.cn
TERASAKI ELECTRIC GROUP SHANGHAI REPRESENTATIVE OFFICE Room No. 1405-6, Tomson Commercial Building, 710 Dong Fang Road, Pudong, Shanghai, 200122, China Telephone: 86-21-58201611 Fax: 86-21-58201621 Email: terasaki@vip.163.com
TERASAKI DO BRASIL LTDA. Rua Cordovil, 259-Parada De Lucas, 21250-450, Rio De Janeiro-R.J., Brazil Telephone: 55-21-3301-9898
top related