a continuaciÓn encontrarÁs el certificado y las ... · y las especificaciones tÉcnicas....

127 Living es un proyecto de vida y queremos que lo vivas con Sostenibilidad. Por eso, actualmente contamos con una pre-certificación Edge, una innovación de la Corporación Financiera Internacional (IFC), miembro del Banco Mundial, que nos permite ejercer y promover la construcción de edificios ecológicos de forma más rápida, fácil y asequible.

Este certificado es entregado a través de CAMACOL solo si accedes a instalar en tu vivienda un paquete verde que incluye griferías ahorradoras, sanitario ahorrador y bombillos ahorradores. Con esto garantizarás:

• Reducir el valor de tu servicio público de agua en un 26%. • Reducir el valor de tu servicio público de luz en un 24%. • Ser parte de tu comunidad sostenible. • Ser protagonista en el cuidado del medio ambiente. • Beneficios en tu crédito de vivienda.

A CONTINUACIÓN ENCONTRARÁS EL CERTIFICADOY LAS ESPECIFICACIONES TÉCNICAS.

Exemplifying achievement in the following areas:

24%Energy Savings

26%Water Savings

Less EmbodiedEnergy in Materials

52%

0.42 tCO₂/unit/year

0.19 tCO₂/unit/year

Operational CO₂ Emissions

Operational CO₂ Savings

THIS CERTIFIES THAT127 Living900 UnitsHAS ACHIEVED ANEDGE PRELIMINARY CERTIFICATECERTIFICATE NUMBERLP9-COL-17101710011566-900-P

DEVELOPED BYConstructora BolivarCERTIFIED BYCAMACOL

Thomas Saunders, EDGE Program DirectorDATE OF ISSUE: 16-JUL-2018

ENERGY MEASURESEnergy-Saving Light Bulbs - Internal SpacesEnergy-Saving Light Bulbs - External Spaces

WATER MEASURESLow-Flow ShowerheadsLow-Flow Faucets for Kitchen SinksLow-Flow Faucets for WashbasinsDual Flush for Water Closets

MATERIALSFloor Slabs - In-Situ Reinforced Concrete SlabRoof Construction - Micro Concrete Tiles on Steel RaftersExternal Walls - Honeycomb Clay Blocks with Internal & External PlasterExternal Walls - In-Situ Reinforced WallInternal Walls - In-Situ Reinforced WallInternal Walls - Honeycomb Clay Blocks with Plaster on Both Sides

THIS CERTIFIES THAT127 LivingTransversal 60 No.125-50Bogota, Cundinamarca

15-JUL-2021DATE OF EXPIRY16-JUL-2018DATE OF ISSUE

CAMACOLCERTIFIED BY

EDGE Software Version: v2.1.5Angel RodriguezWAS AUDITED BY

LP9-COL-17101710011566-900-PCERTIFICATE NUMBER

EDGE PRELIMINARY CERTIFICATEHAS ACHIEVED AN

Constructora BolivarDEVELOPED BY

Colombia

Thomas Saunders, EDGE Program Director

www.edgebuildings.comEDGE is a registered trademark of IFC. ©IFC 2018The EDGE standard requires 20% efficiencies in energy, water and materials compared to a local benchmark. Predicted efficiencies are not a guarantee of future operational performance. Energy savings may be associated with virtual energy for comfort depending on the presence of heating and cooling systems. Virtual energy does not contribute savings to utility bills.

This certificate is issued by the Certifier based on information provided by the client and the audit by the Auditor, and is subject to the terms and conditions of the Certifier. Contact [email protected] if the above measures are not consistent with your observation on the project.

Subproject Name

House or Apartment Block Name

Subproject Multiplier for the Project

Address Line1

Address Line2

City

State/ Province

Postal Code

Country

Subproject Details

Bulevar

Living 127

1

Transversal 60 No.125-50

Bogota

Cundinamarca

Colombia

:

:

:

:

:

:

:

:

:

Subproject Type New Building:

Certification Stage Preliminary:

Status

Auditor

Certificate Issued

Angel Rodriguez

:

:

Certifier CAMACOL:

Location Data

Country

City

Income Category

Colombia

Bogota

Low

:

:

:

Project DetailsProject Name

Number of Distinct Buildings

Number of EDGE Subproject(s) associated

Bulevar

1

1

:

:

:

Total Project Floor Area 42,750 m²:

Project Owner Name

Project Owner Email

Constructora Bolivar

[email protected]

:

:

Project Owner Phone 3114888820:

Address Line1

Address Line2

City

State/ Province

Postal Code

Country

Transversal 60 No.125-50

Bogota

Cundinamarca

Colombia

:

:

:

:

:

:

Project Number 1000103736:

Associated Subproject(s)Bulevar

1

EDGE Version :File Number :Created By :

Date Time :

2.1.517101710011566Constructora Bolivar

16-Jul-2018 11:32:121000103736Project No. :Modified By : Angel Rodriguez

Building Systems

Does building design include an AC system?

Does building design include space heating system?

No

No

:

:

Building Data Area Details

Type of Unit

Average Unit Area

Bedrooms/Unit

Floors

Units

Occupancy (People/Unit)

m²

no.

no.

no.

no.

Flats/Apartments

38

1

15

900

2

Bedroom

Kitchen

Living/Dining

Bathroom

Utility, Balcony, Service Shaft**

Gross Internal Area

External Wall Length m/Unit

Window to Floor Ratio

Default User Entry

**The Utility, Balcony, Service Shaft (m²) field is equal to the remaining space required to total the Gross Internal Area (m²).

8

4

9

1

14.70

38

3

7.2%

8.99

3.48

8.40

2.43

m²

m²

m²

m²

m²

m²

m

:

:

:

:

:

:

:

:

:

:

:

:

:

:

Roof Area/Unit 3 m²:

Common Area/Unit 10 m²:

Key Assumptions for the Base Case

AC System Efficiency

Glass SHGC

Glass U - Value

Wall U - Value

Roof U - Value

Hot Water Boiler Efficiency

Solar Reflectivity for Paint - Roof

Solar Reflectivity for Paint - Wall

Window to Wall Ratio

CO₂ Emissions g/kWh of Electricity

Latitude

Cost of Water

Cost of LPG/Natural Gas

Cost of Diesel Fuel

Cost of Electricity

Fuel Used for Space Heating

Fuel Used for Hot Water

Default User Entry

Electric Resistance

Electricity

0.08

0.95

0.04

0.04

5

220

30%

0.40

0.30

0.80

2.12

1.86

5.75

0.80

2.90

Natural Gas

Electricity

$/kWh

$/L

$/L

$/kL

Deg

g/kWh

%

%

%

%

W/m² K

W/m² K

W/m² K

Factor

COP

Dec

Nov

Oct

Sep

Aug

Jul

Apr

May

Default

Mar

Feb

Jan

Monthly Average Outdoor Temperature (deg.C)

Jun

User Entry

12.9

13.2

13.6

13.8

13.8

13.5

13.1

13.1

13.1

13.2

13.4

12.9

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

2


Date Time :



Energy Efficiency Measures 24.18% Meets EDGE Energy StandardENERGY SAVINGS

RESULTS153.39 kWh/Month/Unit

3.38 kL/Month/Unit

0.19 tCO₂/Year/Unit

38931.68 MJ/Unit

12.83 $/Month/Unit

3.49 $/Month/Unit

Final Energy Use Operational CO₂ Savings

Final Water Use Embodied Energy Savings

Base Case Utility Cost

Utility Costs Reduction

:

:

:

:

:

:

314.18 $/Unit Incremental Cost :

7.51 Yrs.Payback in Years :

648.00 MWh/YearEnergy Savings : 12606.19 m³/YearWater Savings :

35038.51 GJEmbodied Energy in Material Savings

: 42750.00 m²Aggregate Floor Space including Multiplier

:

0.42 tCO₂/Year/Unit CARBON SAVINGS

3


Date Time :



HME19

HME18

HME17

HME16

HME15

HME14

HME13

HME12

HME11

HME20

HME21

Air Conditioning System - COP of 3.5

High Efficiency Boiler for Space Heating - Efficiency of 95%

High Efficiency Boiler for Hot Water - Efficiency of 95%

Heat Pump for Hot Water - COP of 3

Energy-Efficient Refrigerators and Clothes Washing Machines

Energy-Saving Light Bulbs - Internal Spaces

Energy-Saving Light Bulbs - Common Areas and External Spaces

Lighting Controls for Common Areas and Outdoors

Solar Hot Water Collectors - 50% of Hot Water Demand

Solar Photovoltaics - 25% of Total Energy Demand

Smart Meters

No

No

No

No

No

Yes

Yes

No

No

No

No

Collector Area (m²)/Unit

% Hot Water

COP

% Eff.

% Eff.

COP

% of Annual Electricity Use

Capacity kWp/Unit

10

-

16

-

No HME22 Other Renewable Energy for Electricity Generation Source type Wind

5.90% of Annual Electricity Use

HME10

HME09

HME08

HME07

HME06

HME05

HME04

HME03

HME02

HME01 Reduced Window to Wall Ratio - WWR of 44.95%

Reflective Paint/Tiles for Roof - Solar Reflectivity (albedo) of 70

Reflective Paint for External Walls -Solar Reflectivity (albedo) of 70

External Shading Devices - Annual Average Shading Factor (AASF) of 0.53

Insulation of Roof - U Value of 0.47

Insulation of External Walls - U Value of 0.4

Low-E Coated Glass : U-value of 3 W/m².K and SHGC of 0.45

Higher Thermal Performance Glass : U-value of 1.9 W/m².K and SHGC of 0.28

Natural Ventilation

Ceiling Fans in All Habitable Rooms

Yes

No

No

No

No

No

No

No

No

No

WWR %

SHGC

W/m² K

SHGC

W/m² K

W/m² K

W/m² K

AASF

SR

SR

44.95

100

100

0.6

2.70

0.49

2

5.6

No HME23 Offsite Renewable Energy Procurement -Equal to 100% of total Operational CO2 % Annual Operational CO2

-kWh/Year

No HME24 Carbon Offset-100% of Total CO2 % Annual Operational CO2

-tCO2/Year/Unit

4


Date Time :



Water Efficiency Measures 25.68% Meets EDGE Water Standard

% of Roof Area Used

L/flush

1st - L/flush

2nd - L/flush

L/min

L/min

L/min

HMW08

HMW07

HMW06

HMW05

HMW04

HMW03

HMW02

HMW01Yes

Yes

Yes

Yes

No

No

No

No

Low-Flow Showerheads - 6.5 L/min

Low-Flow Faucets for Kitchen Sinks -8 L/min

Low-Flow Faucets for Washbasins - 6 L/min

Dual Flush for Water Closets - 6 L/first flush and 4.2 L/second flush

Single Flush for Water Closets - 6 L/flush

Rainwater Harvesting System - 50% of Roof Area Used for Rainwater Collection

Recycled Grey Water for Flushing

Recycled Black Water for Flushing

6.5

8

6

6

4.2

5.2

100

WATER SAVINGS

5


Date Time :



Materials Efficiency Measures 51.58%

HMM01 Floor Slabs

mm

mm

Steel Rebar

Embodied Energy Savings

In-Situ Reinforced Concrete Slab

300 mm

Steel : 33 kg/m²


300 mm

Steel : 33 kg/m²


Micro Concrete Tiles on Steel Rafters

127 11.37

Meets EDGE Materials Standard

HMM02 Roof Construction

HMM03 External Walls

mmCommon Brick Wall with Internal & External Plaster

200 mm

93%

7%

Type 1

Type 2

Honeycomb Clay Blocks with Internal & External Plaster

In-Situ Reinforced Wall

120

200 mm

kg/m²

Type 1 100%

ThicknessProportion %

6


Date Time :



HMM06

HMM05

HMM04 Internal Walls

Flooring

Window Frames

Common Brick Wall with Plaster on Both Sides

100 mm

Ceramic Tile

Aluminium

Single Glazing

88%

12%

100%

100%

Type 1

Type 1

Type 1

Type 2

In-Situ Reinforced Wall

Honeycomb Clay Blocks with Plaster on Both Sides

Ceramic Tile

Aluminium

150

120

mm

mm

Single Glazing

ThicknessProportion %

7


Date Time :



Building Type Certification Stage Subproject NameHomes Preliminary Bulevar

Energy Measures Preliminary Audit RequirementsHME01 Reduced Window to Wall Ratio > Calculation of “Glazing Area” and “Gross Exterior Wall Area” for each façade of the building and the

average building area weighted WWR using the WWR calculator

> All façade elevation drawings showing glazing dimensions and general building dimensions.

HME16 Energy-Saving Light Bulbs - Internal Spaces

> Lighting schedule listing type and number of bulbs specified.

> Electrical layout drawings showing the location and type of all installed bulbs.

HME17 Energy-Saving Light Bulbs - External Spaces

> Lighting schedule listing type and number of bulbs specified.

> Electrical layout drawings showing the location and type of all installed bulbs.

Water Measures Preliminary Audit RequirementsHMW01 Low-Flow Showerheads > Plumbing drawings/specifications including make, model, and flow rate of the showerhead(s).

> Manufacturer’s data sheet for the showerhead(s) confirming the flow rate at 3 bar.

HMW02 Low-Flow Faucets for Kitchen Sinks > Plumbing drawings/specifications including make, model, and flow rate of kitchen(s) faucet(s) or flow restrictor(s).

> Manufacturer’s data sheet for faucet(s)/flow restrictor(s) confirming the flow rate at 3 bar.

HMW03 Low-Flow Faucets for Washbasins > Plumbing drawings/specifications including make, model, and flow rate of the washbasin faucet(s) or flow restrictor(s).

> Manufacturer’s data sheet for faucet(s)/flow restrictor(s) confirming the flow rate at 3 bar.

HMW04 Dual Flush for Water Closets > Plumbing drawings/specifications including make, model, and flush volumes of water closet(s).

> Manufacturer’s data sheet for water closet(s) with information on the flush volume of the main and reduced flushes.

Material Measures Preliminary Audit RequirementsHMM01 Floor Slabs > Floor sections showing build-up of the floor; or

> Manufacturer’s data sheet for specified building material if applicable; or

> Bill of quantities with the floor slab specification clearly highlighted.

HMM02 Roof Construction > A section drawing of roof showing the materials and thicknesses; or

> Manufacturer’s data sheet for specified building material; or

> Bill of quantities with the materials used for roof construction clearly highlighted.

HMM03 External Walls > Façade drawings clearly marking the external wall specification selected; and

> Drawings of the external wall sections; or

> Manufacturer’s data sheet for specified building material; or

> Bill of quantities with the materials used for the external wall clearly highlighted.

HMM04 Internal Walls > Drawings of the internal wall sections; or

> Manufacturer’s data sheet for building materials used for internal wall specifications if available; or

> Bill of quantities with the materials used for the internal wall clearly highlighted.

HMM05 Flooring > Drawings clearly marking the flooring specification selected; or

> Manufacturer’s data sheet for building materials used for floor specifications; or

> Bill of quantities with the materials used for the flooring clearly highlighted.

HMM06 Window Frames > Façade drawings clearly marking the window frame(s) specification; or

> Manufacturer’s data sheet for glazing specified; or

> Bill of quantities with the windows/window frames clearly highlighted.

EDGE Certification Checklist

8


Date Time :



a continuaciÓn encontrarÁs el certificado y las ... · y las especificaciones tÉcnicas....

Documents