vikas presentation
TRANSCRIPT
-
8/7/2019 Vikas presentation
1/28
VIBRATING TABLE
PROJECT PRESENTATION
Guided By SUBMITTED BY
MR .RAMESH BABU RAVI PRAKASH YADAV
VIKAS KUMAR
Md. Doalam
1
-
8/7/2019 Vikas presentation
2/28
Contenty Introduction
y Scope
y Terminologyy Material used
y Types of spring
y Types of Motor
y Balanced and Unbalanced Motory Dimensioning
y Requirement to construct table
2
-
8/7/2019 Vikas presentation
3/28
y Industrial usesy Application
y Constructional Benefit
y Industrial Benefit
y Modification what we will do.y Advantages .
3
-
8/7/2019 Vikas presentation
4/28
Introductiony A Vibrating Table is used at construction sites. It is used for the
compaction of cement concrete cubes . It includes a table top
with elevated edges. It can take a maximum load capacity of
140 kg but our table will be compatible with maxm load 20 kg.
Single phase induction motor of 1/12 hp will allow frequency
that varied between 1000 to 1400 RPM . We provide complete
unit with a starter switch.
4
-
8/7/2019 Vikas presentation
5/28
Scopey This standard relates to vibrating tables used for. compaction
of concrete in moulds for the manufacture of precast products
and structural elements. It lays down minimum requirementsregarding materials, design, fabrication, criteria for
performance and methods for testing the same.
5
-
8/7/2019 Vikas presentation
6/28
y Vibrating tables shall include all appliances creatingrapidly alternating horizontal, vertical or circularvibrations and capable of transmitting these to mouldsfilled with concrete and placed or clamped on the table top.The vibrating tables do not include shock tables whichpulsate at low frequency and operate with the help ofrotating cams.
6
-
8/7/2019 Vikas presentation
7/28
Terminology
y For the purpose of this standard, the followingdefinitions shall apply.
y Amplitude of Vibration - Maximum displacement ofthe table top from its mean position during vibration.
y Frequency - Number of vibrations or cycles perminute of the table top.
y Vibration Acceleration -The maximum accelerationper cycle of vibration. It is usually expressed as amultiple of acceleration due to gravity.
7
-
8/7/2019 Vikas presentation
8/28
Calculation
8
-
8/7/2019 Vikas presentation
9/28
y Data Given
y Int Dia-5 M.M
y
Ext Dia-10M.My Spring Index-C-D/d-10/5-2
y K=4c-1/4c-4+0.615/c
y By Calculation we got K-2.0575
y Mo-Unbalanced Mass-0.5 kgy M-Mass of Plate without external weight-10 k.g
y N=500 RPM
y F=K/def-2.05/0.4-5N
9
-
8/7/2019 Vikas presentation
10/28
y W=2n/60-52.33 Rad/sec
y Cc-Critical Damping-we got-9.11
y By applying formulaWn-0.458y C-F/X-10/2-5 N-sec/m
y And -0.55
y r-W/Wn-114
y And By formula we got
y Amplitude-A-2.5 M.M this is minimum
10
-
8/7/2019 Vikas presentation
11/28
2ndy Weight is now equal to weight of table top & external
weight-20 K.g and rest everthing is same.
yWhich will give me maxm- Amplitude
y Cc-12.82
y Wn-0.33
y -C/Cc-0.4
y r-W/Wn-158
y By Aplying formula we got-Amplitude As-2.6 M.M
11
-
8/7/2019 Vikas presentation
12/28
Material Usedy Steel sections, plates and bars for construction of the
vibrating table shall conform to Steel.
y
Rivet bars shall conform to Rivet Bars for StructuralPurposes.
y Springs shall be manufactured from suitable grade of wireconforming to Specification for Hard DrawnWire forSprings
12
-
8/7/2019 Vikas presentation
13/28
Types of spring1-Helical spring
2-concentric spring
3-spiral spring4-Leaf spring
5-Bellevile spring
For vibrating table we will use helical spring because when
vibration will produce then there will vertical compressionand extension in spring and compression helical spring canfulfill that condition so we prefer helical spring.
13
-
8/7/2019 Vikas presentation
14/28
Types of Motory Classification of A.C Motor
As regard the type of current
a-single phase b-Three phaseAs regard their speed
a-constant speed b-variable speed c-adjustable speed
As regard their structural feature
a-open b-enclosed c-semi enclosed e.t.c
14
-
8/7/2019 Vikas presentation
15/28
y We will prefer to use single phase induction motor becauseit will generate required rpm for 20 kg load. As in industrialpurpose there generally use three phase Induction Motorwhere load also use minimum 100-150 kg, but in our projectload limited up to the 20 kg. If we consider the cost factorthen it also becomes cheaper then the three phaseinduction motor . This is our justification why will use
single phase motor.
15
-
8/7/2019 Vikas presentation
16/28
Balanced and unbalanced Motory Balanced Motor-Traditionally in market generally available
balanced motor like single phase, three phase , A.C Motor ,D.C Motor all are available in market generally havingcharacteristic of balanced motor.
y Unbalanced Motor-As In vibrating table we have toproduce vibration as earlier I have told that in traditionalarrangement there are pulley belt arrangement but here we
will replace pulley and belt and will mount a countermassin the shaft of motor when it will run then it will producevibration in table which will fulfill the requirement of ourproject.
16
-
8/7/2019 Vikas presentation
17/28
Dimensioningy Plate thickness-2mm
y Spring lengh-10 c.m dia ext.-10 m.m.g dia int.-5 m.m
y
Table size-.55x.55 my square leg-Not more then .5 meter
17
-
8/7/2019 Vikas presentation
18/28
Requirement to construct table
y 1-Electric motor of single phase 1/12 h.p unbalanced
y 2-M.S flat Plate
y
3-4 piece of square legy 4-4 pieces of helical spring Spring
y 5-Sand filter
y 6- Steel sheet
18
-
8/7/2019 Vikas presentation
19/28
Measurement of Vibration
Characteristicsy The vibration characteristics shall be observed ( by actual
measurements or by calculations) at different points of the
table top by operating the table at its maximum load capacity,
and the least of the observed values shall be taken into
account to decide whether the limits specified in frequency to
no load or full load are satisfied.
y The measurements of frequency and amplitude shall be
carried out with the help of a vibrometer or vibrograph, or anyother equally suitable instrument.
The acceleration shall be either measured with the help of
piem-electric accelerometer, or calculated from the following
formula:19
-
8/7/2019 Vikas presentation
20/28
Industrial usesy Vibrating table is very useful in several industries like:
For testing of welded joints in automobile industry For testing of delicate joints in electronic industry For effective packing of fluffy and chemical andpharmaceutical industry
20
-
8/7/2019 Vikas presentation
21/28
Applicationsy Application Areas:
Packing of products
Testing of welding joints Eliminating voids in molded parts Achieving uniformity in ceramic molded parts.
y For compacting concrete mixing
21
-
8/7/2019 Vikas presentation
22/28
Constructional Benefitsy Reduce the need to trowel during pours.
y Reduce or eliminate the need to hand finishing to
remove flaws caused by trapped air.y Dramatically improve product quality and reduce
defects without increasing costs.
y Able to reduce water content.
22
-
8/7/2019 Vikas presentation
23/28
Industrial Benefitsy Put more material into smaller containers.
y Ship less air.
y Reduce overflow and spillover waste at filling stations.y Perform fatigue testing.
y Top quality, fastest delivery.
y Save time.
y Save labor.
23
-
8/7/2019 Vikas presentation
24/28
Diagram of Table Without Modification
24
-
8/7/2019 Vikas presentation
25/28
What we will do Modificationy As we have made plan to set up four rod across the corner
of table and there we will place a sand filter in inclinedshape when we start motor that will produce vibration dueto which filtering will start and it could used for dualpurpose first for the sand filtering second for the concretemixing this is the modification we will do .It will reducetime as well as human dependency.
25
-
8/7/2019 Vikas presentation
26/28
Diagram of table with
Modification.
26
-
8/7/2019 Vikas presentation
27/28
Advantages and Disadvantagesy Advantages
y Reduces the human effort and less time consuming .
y
Less manpower is required .y Dual work of concrete mixing and filtering of sand could
be done
y Disadvantages
y
It is to be disengage upper part if one operation is to beperformed.
27
-
8/7/2019 Vikas presentation
28/28
y Thanks
28