telcom kickoff presentation compatibility mode
TRANSCRIPT
-
7/29/2019 Telcom Kickoff Presentation Compatibility Mode
1/67
Brocade FCIP/FCR
MAJOR TELCOM COMPANYJoe Holbrook
BCFP, BCSD, BCSM
September 04, 2007
-
7/29/2019 Telcom Kickoff Presentation Compatibility Mode
2/67
Legal Disclaimer
All or some of the products detailed in this presentation may still be under development and
certain specifications, including but not limited to, release dates, prices, and product features,
may change. The products may not function as intended and a production version of theproducts may never be released. Even if a production version is released, it may be materially
different from the pre-release version discussed in this presentation.
NOTHING IN THIS PRESENTATION SHALL BE DEEMED TO CREATE A WARRANTY OF
ANY KIND, EITHER EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE, INCLUDING
2007 Brocade Communications Systems, Inc.
All rights reserved.2
, ,
A PARTICULAR PURPOSE, OR NONINFRINGEMENT OF THIRD PARTY RIGHTS WITH
RESPECT TO ANY PRODUCTS AND SERVICES REFERENCED HEREIN.
Brocade, the Brocade B-weave logo, McDATA, Fabric OS, File Lifecycle Manager, MyView,
Secure Fabric OS, SilkWorm, and StorageX are registered trademarks and the Brocade B-wing
symbol and Tapestry are trademarks of Brocade Communications Systems, Inc. or its
subsidiaries, in the United States and/or in other countries. FICON is a registered trademark ofIBM Corporation in the U.S. and other countries. All other brands, products, or service names
are or may be trademarks or service marks of, and are used to identify, products or services of
their respective owners.
-
7/29/2019 Telcom Kickoff Presentation Compatibility Mode
3/67
7500 NOTES
-
7/29/2019 Telcom Kickoff Presentation Compatibility Mode
4/67
7500 Overview
2007 Brocade Communications Systems, Inc.
All rights reserved.4
-
7/29/2019 Telcom Kickoff Presentation Compatibility Mode
5/67
7500 Front
2007 Brocade Communications Systems, Inc.
All rights reserved.5
-
7/29/2019 Telcom Kickoff Presentation Compatibility Mode
6/67
7500 Back
2007 Brocade Communications Systems, Inc.
All rights reserved.6
-
7/29/2019 Telcom Kickoff Presentation Compatibility Mode
7/67
FCIP/FCR NOTES
-
7/29/2019 Telcom Kickoff Presentation Compatibility Mode
8/67
Example Configuration Overview
2007 Brocade Communications Systems, Inc.
All rights reserved.8
-
7/29/2019 Telcom Kickoff Presentation Compatibility Mode
9/67
FCIP/FCR
Once the switch (SW7500) is configured, the switchShowcommand displays 32 Fibre Channel ports (port numbers 0 through
31) and 2 GbE ports.
The first 16 Fibre Channel ports are physical ports on the SilkWorm
2007 Brocade Communications Systems, Inc.
All rights reserved.9
, -
physical GbE link and ports 24-31 are virtual ports associated withGE1 physical GbE link. The GbE ports are displayed as ge0 andge1 and are not assigned port numbers or area numbers.
-
7/29/2019 Telcom Kickoff Presentation Compatibility Mode
10/67
FCIP/FCR
NOTE: Fabrics connected through FCIP merge if the ports areconfigured as VE_Ports, and do not merge if they are configured as
VEX_Ports.
If VE_Ports are used in a Fibre Channel Routing Servicesbackbone fabric configuration, then the backbone fabric merges butthe EX Port attached to ed e fabrics do not mer e.
2007 Brocade Communications Systems, Inc.
All rights reserved.10
_
-
7/29/2019 Telcom Kickoff Presentation Compatibility Mode
11/67
FCIP/FCR
NOTE: The port types for FCIP tunneling are either VE_Port orVEX_Port. An FCIP tunnel using VE_Ports will merge the two
fabrics.
An FCIP tunnel using a VEX_Port will not merge the fabrics.
A VEX_Port can connect only to a VE_Port.
2007 Brocade Communications Systems, Inc.
All rights reserved.11
The IP encapsulation of the Fibre Channel frame on one port andthe reconstruction of Fibre Channel frames on the other port istransparent to the initiator and target.
-
7/29/2019 Telcom Kickoff Presentation Compatibility Mode
12/67
FCIP/FCR
NOTE: If using FCIP in your FC-FC Routing configuration, youmust first configure FCIP tunnels.
Once a tunnel is created, it defaults to a disabled state. Thenconfigure the VE_Port or VEX_Port. After the appropriateports are configured, enable the tunnel.
2007 Brocade Communications Systems, Inc.
All rights reserved.12
-
7/29/2019 Telcom Kickoff Presentation Compatibility Mode
13/67
BROCADE FCR/FCIP
Secure Fabric OS, Management Server Platform services, andinteropmode are notsupported in the backbone fabric.
FOS 5.2 and above support FC-FC connections to McDATA Fabrics.Fabric OS v5.2.0 furnishes the FC router with the ability to connect toMcDATA fabrics in both McDATA Open or McDATA Fabric mode.
2007 Brocade Communications Systems, Inc.
All rights reserved.13
-
7/29/2019 Telcom Kickoff Presentation Compatibility Mode
14/67
BROCADE FCR/FCIP
Ensure fabric OS is at v5.1 or later.
Fabric OS 5.2 or later is required if connecting to McDATA Fabrics
2007 Brocade Communications Systems, Inc.
All rights reserved.14
-
7/29/2019 Telcom Kickoff Presentation Compatibility Mode
15/67
Information Needed
-
7/29/2019 Telcom Kickoff Presentation Compatibility Mode
16/67
Pre Implementation Information Gathering
Lets Document the following
Switchname
IP Addresses
2007 Brocade Communications Systems, Inc.
All rights reserved.16
u ne
Netmask
MTU size (Jumbo Packets?)
FCR LSAN Zoning
-
7/29/2019 Telcom Kickoff Presentation Compatibility Mode
17/67
Configure Switch
-
7/29/2019 Telcom Kickoff Presentation Compatibility Mode
18/67
Configure Term
Configure the Port Settings parameters as follows:
Bits per second 9600
Data bits - 8
2007 Brocade Communications Systems, Inc.
All rights reserved.18
ar y - one
Stop bits - 1
Flow control None
-
7/29/2019 Telcom Kickoff Presentation Compatibility Mode
19/67
Configure Management LAN
a. View Current Management Interface Settings
i. ipaddrshow to view current configuration
1. Ethernet IP Address:
2. Ethernet Subnetmask:
3. Fibre Channel IP Address:
4. Fibre Channel Subnetmask:
5. Gateway Address:
b. Set IP for Management Interface
2007 Brocade Communications Systems, Inc.
All rights reserved.19
i. ipaddrset and follow prompts1. IP Address
2. Subnetmask
3. Fibre Channel IP Address
4. Fibre Channel Subnetmask
5. Gateway IP Address
c. Reboot Switch
-
7/29/2019 Telcom Kickoff Presentation Compatibility Mode
20/67
Set Switchname
When naming your routers it is important to name them in a consistentand easy to replicate manner.
switchname name
2007 Brocade Communications Systems, Inc.
All rights reserved.20
-
7/29/2019 Telcom Kickoff Presentation Compatibility Mode
21/67
Verify Firmware
Firmware needs to be v5.1 and above
a. version to display current firmware version running on switch
b. firmwareshow Display firmware in both memory partitions
2007 Brocade Communications Systems, Inc.
All rights reserved.21
c. check OEM recommended level & TSBs to determine if upgrade isnecessary
-
7/29/2019 Telcom Kickoff Presentation Compatibility Mode
22/67
Configure Domain ID and Fabric Params
a. switchdisable to disable switch in order to make fabric parameter changes
b. configure
i Note: Ctrl-D at any time to accept remaining settings without completing all prompts.
c. Yes or Y to configure fabric parameters
d. Domain ID
2007 Brocade Communications Systems, Inc.
All rights reserved.22
e. WAN_TOV
ii. Accept Default of 1000ms
iii. If timeouts/errors occur on tunnel this can be modified/updated
f. Insistent Domain ID (OPTIONAL)
g. switchenable
-
7/29/2019 Telcom Kickoff Presentation Compatibility Mode
23/67
Optional Settings
Time Server
a. tsclockserver xxx.xxx.xxx.xxx
b. verify settings using tsclockserver
Time Zone
2007 Brocade Communications Systems, Inc.
All rights reserved.23
. ,
i. For Pacific Standard Time, enter tsTimeZone -8,0
ii. For Mountain Standard Time, enter tsTimeZone -7,0
iii. For Central Standard Time, enter tsTimeZone -6,0
iv. For Mountain Standard Time, enter tsTimeZone -5,0
-
7/29/2019 Telcom Kickoff Presentation Compatibility Mode
24/67
Optional Settings
Syslog Server
a. syslogdipadd xxx.xxx.xxx.xxx to add a new syslog server
b. syslogdipshow to view configured syslog servers
2007 Brocade Communications Systems, Inc.
All rights reserved.24
-
7/29/2019 Telcom Kickoff Presentation Compatibility Mode
25/67
Optional Settings
Syslog Server
a. syslogdipadd xxx.xxx.xxx.xxx to add a new syslog server
b. syslogdipshow to view configured syslog servers
2007 Brocade Communications Systems, Inc.
All rights reserved.25
-
7/29/2019 Telcom Kickoff Presentation Compatibility Mode
26/67
Install FCIP License
a. licenseshow (record info)
b. validate licenses active with packet of licenses purchased
i. If licenses are missing we need
2007 Brocade Communications Systems, Inc.
All rights reserved.26
.
2. WWN (from switchshow)
ii. If we have a license key proceed to activate license
c. licenseadd key
d. licenseremove key
-
7/29/2019 Telcom Kickoff Presentation Compatibility Mode
27/67
Configupload
a. configupload (Follow Prompts for the following information)
i. Protocol (ftp or scp)
ii. Server Name or IP Address
iii. User Name
2007 Brocade Communications Systems, Inc.
All rights reserved.27
iv. File Name
v. Password
b. Verify File was uploaded to FTP server
-
7/29/2019 Telcom Kickoff Presentation Compatibility Mode
28/67
Verify Switch Status
a. switchStatusShow
i. Verifies overall switch status
b. portShow port number
i. Verifies port status on per port basis
c. fanShow
2007 Brocade Communications Systems, Inc.
All rights reserved.28
i. Verifies overall Fan status
d. psShow
i. Verifies overall Power Supply Status
e. tempShow
i. Verifies Temperature Sensor Status
-
7/29/2019 Telcom Kickoff Presentation Compatibility Mode
29/67
Configure FCIP Ports
-
7/29/2019 Telcom Kickoff Presentation Compatibility Mode
30/67
Configure FCIP Ports
VERIFY SETTINGS
SW7500:admin> portcfg ge0 or portcfg ge1
Usage: portCfg [Slot/]Port[-Range]
Range: Specify a range of port in the same slot to apply
Action:
2007 Brocade Communications Systems, Inc.
All rights reserved.30
rscnsupr -- RSCN suppression
ipif -- IP Interface
iproute -- IP Routes
fciptunnel -- FCIP Tunnel
arp -- ARP Entry
Args: Action specific arguments
-
7/29/2019 Telcom Kickoff Presentation Compatibility Mode
31/67
Configure FCIP Ports
a. Portcfgshow ge0 (To view current configuration of GbE 0)
b. Portcfgshow ge1 (To view current configuration of GbE 1)
2007 Brocade Communications Systems, Inc.
All rights reserved.31
-
7/29/2019 Telcom Kickoff Presentation Compatibility Mode
32/67
Configure FCIP Ports
Licenseshow
Verify Persistently disabled
a. Switchshow to validate that ports 16 31 are disabled (These areFCIP Tunnel Virtual Ports)
2007 Brocade Communications Systems, Inc.
All rights reserved.32
. er y ge ge are sa e
-
7/29/2019 Telcom Kickoff Presentation Compatibility Mode
33/67
Configure FCIP Ports
c. The Tunnel Ports associated to each GbE interface are shown belowPort GbE Interface Tunnel Number
==============================
16 GbE 0 TUNNEL 0
17 GbE 0 TUNNEL 1
18 GbE 0 TUNNEL 2
19 GbE 0 TUNNEL 3
20 GbE 0 TUNNEL 4
21 GbE 0 TUNNEL 5
22 GbE 0 TUNNEL 6
23 GbE 0 TUNNEL 7
2007 Brocade Communications Systems, Inc.
All rights reserved.33
24 GbE 1 TUNNEL 0
25 GbE 1 TUNNEL 1
26 GbE 1 TUNNEL 2
27 GbE 1 TUNNEL 3
28 GbE 1 TUNNEL 4
29 GbE 1 TUNNEL 5
30 GbE 1 TUNNEL 6
31 GbE 1 TUNNEL 7
ge0 id 1G No_Sync Disabled
ge1 id 1G No_Sync Disabled
-
7/29/2019 Telcom Kickoff Presentation Compatibility Mode
34/67
Configure FCIP Ports
Define Switch_A
a. Portshow ipif ge0 / ge1 To View Current IP, Netmask & MTU settings
b. To Add IP Tunnels to ge0
i. portcfg ipif ge0 create 192.168.101.10 255.255.255.0 1500 (UP TO 8 PER EACH GE
PORT CAN BE CREATED)
1. IP = 192.168.101.10
2007 Brocade Communications Systems, Inc.
All rights reserved.34
2. NetMask = 255.255.255.0
3. MTU = 1500
ii. portcfg ipif ge0 create 192.168.101.11 255.255.255.0 1500
1. IP = 192.168.101.11
2. NetMask = 255.255.255.0
3. MTU = 1500
-
7/29/2019 Telcom Kickoff Presentation Compatibility Mode
35/67
Configure FCIP Ports
c. To Add IP Tunnels to ge1
i. portcfg ipif ge1 create 192.168.101.20 255.255.255.0 1500 (UP TO 8 PER EACH GE
PORT CAN BE CREATED)
1. IP = 192.168.101.20
2. NetMask = 255.255.255.0
2007 Brocade Communications Systems, Inc.All rights reserved.
35
3. MTU = 1500
ii. portcfg ipif ge1 create 192.168.101.21 255.255.255.0 1500
1. IP = 192.168.101.21
2. NetMask = 255.255.255.0
3. MTU = 1500
-
7/29/2019 Telcom Kickoff Presentation Compatibility Mode
36/67
Configure FCIP Ports
d. portshow ipif ge0 / ge1 to view / ensure settings are correct
Port: ge0
Interface IP Address NetMask MTU
----------------------------------------------------------
0 192.168.101.10 255.255.255.0 1500
1 192.168.101.11 255.255.255.0 1500
Port: ge1
2007 Brocade Communications Systems, Inc.All rights reserved.
36
Interface IP Address NetMask MTU
----------------------------------------------------------
0 192.168.101.20 255.255.255.0 1500
1 192.168.101.21 255.255.255.0 1500
e. To Delete a defined IP
i. portcfg ipif ge0 / ge1 delete xxx.xxx.xxx.xxx where xs = IP address
-
7/29/2019 Telcom Kickoff Presentation Compatibility Mode
37/67
Configure FCIP Ports
Configure Remote Switch_B
a. portshow ipif ge0 / ge1 To View Current IP, Netmask & MTU settings
b. To Define IP Tunnel Configuration to ge0
i. portcfg ipif ge0 create 192.168.101.200 255.255.255.0 1500 (UP TO 8 PEREACH
2007 Brocade Communications Systems, Inc.All rights reserved.
37
GE PORT CAN BE CONFIGURED)
1. IP = 192.168.101.200
2. NetMask = 255.255.255.0
3. MTU = 1500
-
7/29/2019 Telcom Kickoff Presentation Compatibility Mode
38/67
Configure FCIP Ports
ii. portcfg ipif ge0 create 192.168.101.201 255.255.255.0 1500
1. IP = 192.168.101.201
2. NetMask = 255.255.255.0
3. MTU = 1500
2007 Brocade Communications Systems, Inc.All rights reserved.
38
-
7/29/2019 Telcom Kickoff Presentation Compatibility Mode
39/67
Configure FCIP Ports
c. To Define IP Tunnel Configuration to ge1
i. portcfg ipif ge1 create 192.168.101.210 255.255.255.0 1500 (UP TO 8 PEREACH GE PORT CAN BE CONFIGURED)
1. IP = 192.168.101.210
2. NetMask = 255.255.255.0
2007 Brocade Communications Systems, Inc.All rights reserved.
39
. =
ii. portcfg ipif ge1 create 192.168.101.211 255.255.255.0 1500
1. IP = 192.168.101.211
2. NetMask = 255.255.255.0
3. MTU = 1500
-
7/29/2019 Telcom Kickoff Presentation Compatibility Mode
40/67
Configure FCIP Ports
d. portshow ipif ge0 / ge1 to view / ensure settings are correct
Port: ge0
Interface IP Address NetMask MTU
----------------------------------------------------------
0 192.168.101.200 255.255.255.0 1500
1 192.168.101.201 255.255.255.0 1500
2007 Brocade Communications Systems, Inc.All rights reserved.
40
Port: ge1
Interface IP Address NetMask MTU
----------------------------------------------------------
0 192.168.101.210 255.255.255.0 1500
1 192.168.101.211 255.255.255.0 1500
-
7/29/2019 Telcom Kickoff Presentation Compatibility Mode
41/67
ENABLE FCIP Ports
Add Routes (optional)
Enable GE Ports!!
a. Switchshow to view all ports
2007 Brocade Communications Systems, Inc.All rights reserved.
41
b. portenable ge0 on both local & remote routers
c. portenable ge1 on both local & remote routers
d. switchshow to verity ports are enabled
V if FCIP P t
-
7/29/2019 Telcom Kickoff Presentation Compatibility Mode
42/67
Verify FCIP Ports
Verify Connectivity (We will need to this both ways) This verification isused to ping the destination IP address from one of the source IPinterfaces on the GbE ports to ensure Ethernet IP-IP connectivity.
This verification also ensures that data packets can be sent to theremote interfaces
a. portcmd ping ge0 s 192.168.101.10 d 192.168.101.200
2007 Brocade Communications Systems, Inc.All rights reserved.
42
-s Source
-d Destination
V if FCIP P t
-
7/29/2019 Telcom Kickoff Presentation Compatibility Mode
43/67
Verify FCIP Ports
COMMAND EXAMPLE OUTPUT
SW7500_D11:admin> portcmd ping ge0 -s 192.168.101.10 -d 192.168.101.200
Pinging 192.168.101.200 from ip interface 192.168.101.10 on 0/0 with 40 bytes of data
Reply from 192.168.101.200: bytes=40 rtt=0ms
Reply from 192.168.101.200: bytes=40 rtt=0ms
2007 Brocade Communications Systems, Inc.All rights reserved.
43
Reply from 192.168.101.200: bytes=40 rtt=0ms
Reply from 192.168.101.200: bytes=40 rtt=0ms
Ping Statistics for 192.168.101.200:
Packets: Sent = 4, Received = 4, Loss = 0 ( 0 percent loss)
Min RTT = 0ms, Max RTT = 0ms Average = 0ms
C fi FCIP T l
-
7/29/2019 Telcom Kickoff Presentation Compatibility Mode
44/67
Configure FCIP Tunnels
After you have verified licensing and connectivity between your sourceand destination IP interfaces, you can configure FCIP tunnels. As youyour tunnel configurations, be aware that uncommitted rate tunnels use
a minimum of 1000 Kbps, up to a maximum of available uncommittedbandwidth on the GbE port.
The total bandwidth available on a GbE port is 1 Gbps. You can
2007 Brocade Communications Systems, Inc.All rights reserved.
44
con gure unne s as rec ona en es w eren comm ra es n
both directions.
Config re FCIP T nnels
-
7/29/2019 Telcom Kickoff Presentation Compatibility Mode
45/67
Configure FCIP Tunnels
a. portcfg fciptunnel ge0 create 1 192.168.101.200 192.168.101.10 500000
i. if only half of the tunnel is ours or we need to throttle the tunnel we can modifythe settings here using a different value than 500000
ii. NOTE This example (We are using of the full 1G tunnel for this tunnel andthe other for the 2nd one being created in b below)
2007 Brocade Communications Systems, Inc.All rights reserved.
45
b. portcfg fciptunnel ge0 create 2 192.168.101.201 192.168.101.11 500000
i. if only half of the tunnel is ours or we need to throttle the tunnel we can modifythesettings here using a different value than 500000
ii. NOTE (We are using of the full 1G tunnel for this tunnel and the other for
the2nd one being created in b below)
Configure FCIP Tunnels
-
7/29/2019 Telcom Kickoff Presentation Compatibility Mode
46/67
Configure FCIP Tunnels
c. portshow fciptunnel ge0 all (To View Created Tunnels, Output Below)
i. Notice that the tunnel is Inactive until the Remote side is configured.
SW7500_D11:admin> portshow fciptunnel ge0 all
Port: ge0
-------------------------------------------
Tunnel ID 1
Remote IP Addr 192.168.101.200
Local IP Addr 192.168.101.10
2007 Brocade Communications Systems, Inc.All rights reserved.
46
Remote WWN Not Configured
Local WWN 10:00:00:05:1e:37:8c:35
Compression off
Committed Rate 500000 Kbps (0.50000 Gbps)
SACK on
Min Retransmit Time 100
Keepalive Timeout 10
Command Truncated!!!
Configure FCIP Tunnels
-
7/29/2019 Telcom Kickoff Presentation Compatibility Mode
47/67
Configure FCIP Tunnels
CONFIGURE LOCAL FCIP TUNNELS (GE1 Optional)
a. portcfg fciptunnel ge1 create 1 192.168.101.210 192.168.101.20500000
b. portcfg fciptunnel ge1 create 2 192.168.101.211 192.168.101.21500000
2007 Brocade Communications Systems, Inc.All rights reserved.
47
c. portshow fciptunnel ge1 all (To View Created Tunnels, Output Below)
i. Notice that the tunnel is Inactive.
SW7500_D11:admin> portshow fciptunnel ge1 all
Port: ge1
Configure FCIP Tunnels
-
7/29/2019 Telcom Kickoff Presentation Compatibility Mode
48/67
Configure FCIP Tunnels
Configure Remote FCIP Tunnel GE0
a. portcfg fciptunnel ge0 create 1 192.168.101.10 192.168.101.200
500000
b. portcfg fciptunnel ge0 create 2 192.168.101.11 192.168.101.201500000
2007 Brocade Communications Systems, Inc.All rights reserved.
48
c. portshow fciptunnel ge0 all (To View Created Tunnels, Output Below)
i. Notice that the tunnel is Inactive
Configure FCIP Tunnels
-
7/29/2019 Telcom Kickoff Presentation Compatibility Mode
49/67
Configure FCIP Tunnels
Configure Remote FCIP Tunnel GE1 (optional)
a. portcfg fciptunnel ge1 create 1 192.168.101.20 192.168.101.210
500000
b. portcfg fciptunnel ge1 create 2 192.168.101.21 192.168.101.211500000
2007 Brocade Communications Systems, Inc.All rights reserved.
49
c. portshow fciptunnel ge1 all (To View Created Tunnels, Output Below)
ii. Notice that the tunnel is Inactive.
Configure FCIP Tunnels
-
7/29/2019 Telcom Kickoff Presentation Compatibility Mode
50/67
Configure FCIP Tunnels
NOTE:
Create as many tunnel IDs as necessary. Maximum of 8 Tunnels per
GbE port. You cannot use more than the avail max of 1G per physicallink.
2007 Brocade Communications Systems, Inc.All rights reserved.
50
Verify FCIP Tunnels
-
7/29/2019 Telcom Kickoff Presentation Compatibility Mode
51/67
Verify FCIP Tunnels
a. Portshow fciptunnel ge0 all
i. Notice that the tunnel is now Active
SW7500_D11:admin> portshow fciptunnel ge0 all
Port: ge0
-------------------------------------------
Tunnel ID 1
Remote IP Addr 192.168.101.200
Local IP Addr 192.168.101.10
2007 Brocade Communications Systems, Inc.All rights reserved.
51
Remote WWN Not Configured
Local WWN 10:00:00:05:1e:37:8c:35
Compression off
Committed Rate 100000 Kbps (0.100000 Gbps)
SACK on
Min Retransmit Time 100
Keepalive Timeout 10
Max Retransmissions 8
Status : Inactive
Persistentenable FCIP Tunnels
-
7/29/2019 Telcom Kickoff Presentation Compatibility Mode
52/67
Persistentenable FCIP Tunnels
Persistentenable
portCfgPersistentEnable {port}
2007 Brocade Communications Systems, Inc.All rights reserved.
52
Verify Ports
-
7/29/2019 Telcom Kickoff Presentation Compatibility Mode
53/67
Verify Ports
switchshow to verify VE port(s) are online
16 16 -- -- Offline Disabled (Persistent)
17 17 -- -- Online VE-Port 10:00:00:05:1e:37:8d:c1 "SW7500_D12" (downstream)
18 18 -- -- Online VE-Port 10:00:00:05:1e:37:8d:c1 "SW7500_D12"
19 19 -- -- Offline Disabled (Persistent)
20 20 -- -- Offline Disabled (Persistent)
2007 Brocade Communications Systems, Inc.All rights reserved. 53
21 21 -- -- Offline Disabled (Persistent)
22 22 -- -- Offline Disabled (Persistent)
23 23 -- -- Offline Disabled (Persistent)
24 24 -- -- Offline Disabled (Persistent)
25 25 -- -- Online VE-Port 10:00:00:05:1e:37:8d:c1 "SW7500_D12"
26 26 -- -- Online VE-Port 10:00:00:05:1e:37:8d:c1 "SW7500_D12
Configuration Overview
-
7/29/2019 Telcom Kickoff Presentation Compatibility Mode
54/67
Configuration Overview
2007 Brocade Communications Systems, Inc.All rights reserved. 54
Configure LSANS AND ZONING
-
7/29/2019 Telcom Kickoff Presentation Compatibility Mode
55/67
g
s
2007 Brocade Communications Systems, Inc.All rights reserved. 55
Configure LSANS AND ZONING
-
7/29/2019 Telcom Kickoff Presentation Compatibility Mode
56/67
g
Create a zone with the same members (e.g., HBA in fabric A, storageport in fabric B) coded with the PWWN of the device.
The zone mustuse the naming convention LSAN_ZONENAME orlsan_zonename Note that the name of the zone to the right of theunderscore character can be anything you want, as long as the aboveconvention is used.
2007 Brocade Communications Systems, Inc.All rights reserved. 56
It is administratively easier if the zone name is the same in each edgefabric, though this is not required as long as the members of the zoneare identical.
Configure LSANS AND ZONING
-
7/29/2019 Telcom Kickoff Presentation Compatibility Mode
57/67
g
An LSAN consists of zones in two or more edge or backbone fabricsthat contain the same device(s).
LSANs essentially provide selective device connectivity between fabricswithout forcing you to merge those fabrics. The SilkWorm 7500, 48000with a FR4-18i blade, and AP7420 Multiprotocol Router provide
multi le mechanisms for ou to mana e interfabric device connectivit
2007 Brocade Communications Systems, Inc.All rights reserved. 57
through extensions to existing switch management interfaces. You can
define and manage LSANs using Brocade Advanced Zoning or BrocadeFabric Manager.
Zones are locally defined. Names and memberships, with the exceptionof hosts and targets exported from one fabric to another, do not need to
be coordinated with other fabrics.
Configure LSANS AND ZONING
-
7/29/2019 Telcom Kickoff Presentation Compatibility Mode
58/67
g
Zones that contain hosts and targets that are shared between the twofabrics need to be explicitly coordinated. Although an LSAN is managedusing the same tools as any other zone on the edge fabric, two
behaviors distinguish an LSAN from a conventional zone:
A required naming convention. The name of an LSAN begins with theprefix LSAN_. The LSAN name is letter case insensitive; for example,
2007 Brocade Communications Systems, Inc.All rights reserved. 58
san_ s equ va en o _, san_, an so on.
Members must be identified by their port WWN because PIDs are notnecessarily unique across fabrics. The names of the zones need not beexplicitly the same, and membership lists of the zones need not be inthe same order.
Configure LSANS AND ZONING
-
7/29/2019 Telcom Kickoff Presentation Compatibility Mode
59/67
NOTE:
If you are managing other switches in a fabric, it is recommended that
you run the defZone show command on your Fabric OS v5.1.0switches as a precaution. Default zoning behavior in Fabric OS v5.1.0
operates differently compared to other Fabric OS versions (for example,
2007 Brocade Communications Systems, Inc.All rights reserved. 59
vers ons .x, .x .x an . . . or examp e, you ssue e e one --
noaccess command on a Fabric OS v5.1.0 switch, then default zoningconfigurations will be created on each switch in the fabric (v2.x, v3.x,v4.x or v5.0.1 switches). Fabric OS v5.1.0 switches do not indicate thata default configuration is enabled when you use the cfgShow orcfgActvShow commands.
Configure LSANS AND ZONING
-
7/29/2019 Telcom Kickoff Presentation Compatibility Mode
60/67
a. nsshow to list the WWN of the host. The port WWN must be used for LSANs
i. Record Host port WWN
b. Create The LSAN Zone
i. zoneCreate lsan_ZoneName, WWN
ii. Creates LSAN_Zone & adds Host
2007 Brocade Communications Systems, Inc.All rights reserved. 60
c. Add Target member(s) to the LSAN Zone
i. zoneAdd lsan_ZoneName, WWN
ii. Adds Target to Zone
Configure LSANS AND ZONING
-
7/29/2019 Telcom Kickoff Presentation Compatibility Mode
61/67
d. Create the LSAN Zone Configuration
i. cfgCreate Zone_Cfg, lsan_Zone Name
e. Verify that the Created LSAN Zones are correct
i. cfgShow
2007 Brocade Communications Systems, Inc.All rights reserved. 61
.
i. cfgenable zone_cfg
Configure LSANS AND ZONING
-
7/29/2019 Telcom Kickoff Presentation Compatibility Mode
62/67
g. Complete Steps A F on the 2nd Fabric
Configuration Second Fabric as previous
2007 Brocade Communications Systems, Inc.
All rights reserved. 62
Configure LSANS AND ZONING
-
7/29/2019 Telcom Kickoff Presentation Compatibility Mode
63/67
b. lsanZoneShow s
i. Displays the LSAN
c. fcrPhyDevShow
2007 Brocade Communications Systems, Inc.
All rights reserved. 63
.
d. fcrProxyDevShow
i. Displays the Proxy Devices in the LSAN
Verify LSANS AND ZONING
-
7/29/2019 Telcom Kickoff Presentation Compatibility Mode
64/67
Run the command lsanzoneshow s on each router. The PWWN for thezoned device physically present in the edge fabric will show up in theoutput with the comment Exist, while the PWWN for the device
presented to the edge fabric through the router will show up with thecomment Imported.
Note that the Exist/Imported relationship to the associated PWWN will
2007 Brocade Communications Systems, Inc.
All rights reserved. 64
e oppos e on eac rou er.
Verify that the host can see assigned storage
WAN Analysis
-
7/29/2019 Telcom Kickoff Presentation Compatibility Mode
65/67
Introduced in Fabric OS v5.2.0, WAN analysis tools are designed toestimate the end-to-end IP path performance characteristics between apair of Brocade FCIP port endpoints. WAN tools include the following
commands and options:
portCmd ipPerfCharacterizes end-to-end IP path performancebetween a pair of Brocade FCIP ports.
2007 Brocade Communications Systems, Inc.
All rights reserved. 65
You can use the WAN tool ipPerfonly on the FR4-18i or SilkWorm 7500FCIP ports running Fabric OS v5.2.0 or later software.
portShow fcipTunnelDisplays performance statistics generatedfrom the WAN analysis.
Perf Terminology
-
7/29/2019 Telcom Kickoff Presentation Compatibility Mode
66/67
s
2007 Brocade Communications Systems, Inc.
All rights reserved.66
Brocade Services OfferingsU t h d E ti f O i C t N d
-
7/29/2019 Telcom Kickoff Presentation Compatibility Mode
67/67
Unmatched Expertise for Ongoing Customer Needs
Professional Services andSupport:
Assess Design
Implement
2007 Brocade Communications Systems, Inc.
All rights reserved.67
Maintain
Support