practica lab 05
DESCRIPTION
ÂTRANSCRIPT
Universidad Tecnológica del Valle de Toluca
Nombre de la Práctica:
Práctica 5
“Diseño de una Red 1 Parte”
Fecha de la práctica:
12-02-2015
Nombre y matricula de la alumna:
Karla Guadalupe Cárcamo Jiménez 221110300
Asignatura:
Redes Convergentes
Profesor:
ISE Raúl García
Grupo: ITIC-83
Objetivos
Parte 1: Crear 5 subredes (Toluca,D.F,Monterrey,Guadalajara,Guanajuato) cada una debe tener su direccion IP,direccion de brodcast,su mascara de subred
Paso 2: Cuantos dispositivos se pueden conectar en cada ciudad y rango de ip’s disponibles
Parte 3: Crear una VLAN para cada ciudad en el switch principal
Parte 4: Conectar un switch para cada ciudad
Parte 5: Asignarle direccion ip a las PC’s
Topologia
Desarrollo de práctica
Parte 1: Crear 5 subredes (Toluca,D.F,Monterrey,Guadalajara,Guanajuato) cada una debe tener su direccion IP,direccion de brodcast,su mascara de subred
Dirección original: 150.81.10.0 / 255.255.255.192
NOMBRE DIRECCION DE RED
DIRECCION BRODCAST
MASCARA DE SUBRED
TOLUCA 150.81.10.0/29 150.81.10.7 255.255.255.248
DF 150.81.10.8/29 150.81.10.15 255.255.255.248
MONTERREY 150.81.10.16/29 150.81.10.23 255.255.255.248
GUADALAJARA 150.81.10.24/29 150.81.10.31 255.255.255.248
GUANAJUATO 150.81.10.32/29 150.81.10.39 255.255.255.248
Estas son las direcciones que necesitaras para cada uno de los dispositivos [switch]
Paso 2: Cuantos dispositivos se pueden conectar en cada ciudad y rango de ip’s disponibles
- Los dispositivos que se pueden conectar en cada ciudad serian 6
- Los rangos de las ip’s son:
NOMBRE RANGO DISPONIBLES
TOLUCA 150.81.10.1 a 6
DF 150.81.10.9 a 14
MONTERREY 150.81.10.17 a 22
GUADALAJARA 150.81.10.25 a 30
GUANAJUATO 150.81.10.33 a 38
Parte 3: Crear una VLAN para cada ciudad en el switch principal
Paso1: crear VLAN del switch1 con el nombre (Toluca) numero 20
Switch>enable Switch#vlan database % Warning: It is recommended to configure VLAN from config mode, as VLAN database mode is being deprecated. Please consult user documentation for configuring VTP/VLAN in config mode. Switch(vlan)#vlan 20 name Toluca VLAN 20 added: Name: Toluca Switch(vlan)#exit APPLY completed. Exiting.... Switch#
Paso2: crear VLAN del switch1 con el nombre (DF) numero 40
Switch#vlan database
% Warning: It is recommended to configure VLAN from config mode,
as VLAN database mode is being deprecated. Please consult user
documentation for configuring VTP/VLAN in config mode.
Switch(vlan)#vlan 40 name DF
VLAN 40 added:
Name: DF
Switch(vlan)#exit
APPLY completed.
Exiting....
Switch#
Paso3: crear VLAN del switch1 con el nombre (Monterrey) numero 60
Switch#vlan database
% Warning: It is recommended to configure VLAN from config mode,
as VLAN database mode is being deprecated. Please consult user
documentation for configuring VTP/VLAN in config mode.
Switch(vlan)#vlan 60 name Monterrey
VLAN 60 added:
Name: Monterrey
Switch(vlan)#exit
APPLY completed.
Exiting....
Switch#exit
Paso4: crear VLAN del switch1 con el nombre (Guadalajara) numero 80
Switch#vlan database
% Warning: It is recommended to configure VLAN from config mode,
as VLAN database mode is being deprecated. Please consult user
documentation for configuring VTP/VLAN in config mode.
Switch(vlan)#vlan 80 name Guadalajara
VLAN 80 added:
Name: Guadalajara
Switch(vlan)#exit
APPLY completed.
Exiting....
Switch#
Paso5: crear VLAN del switch1 con el nombre (Guanajuato) numero 100
Switch#vlan database
% Warning: It is recommended to configure VLAN from config mode,
as VLAN database mode is being deprecated. Please consult user
documentation for configuring VTP/VLAN in config mode.
Switch(vlan)#vlan 100 name Guanajuato
VLAN 100 added:
Name: Guanajuato
Switch(vlan)#exit
APPLY completed.
Exiting....
Switch#
Parte 4: Conectar un switch para cada ciudad
Paso 1: ciudad Toluca
Switch>enable Switch#vlan database % Warning: It is recommended to configure VLAN from config mode, as VLAN database mode is being deprecated. Please consult user documentation for configuring VTP/VLAN in config mode. Switch(vlan)#vlan 20 name Toluca VLAN 20 modified: Name: Toluca Switch(vlan)#exit APPLY completed. Exiting.... Switch#config t Enter configuration commands, one per line. End with CNTL/Z. Switch(config)#interface fa0/1 Switch(config-if)#switchport access vlan 20 Switch(config-if)#exit Switch(config)#exit Switch# %SYS-5-CONFIG_I: Configured from console by console Switch#
Paso2: cuidad DF
Switch>enable Switch#vlan database % Warning: It is recommended to configure VLAN from config mode, as VLAN database mode is being deprecated. Please consult user documentation for configuring VTP/VLAN in config mode. Switch(vlan)#vlan 40 name DF VLAN 40 added: Name: DF Switch(vlan)#exit APPLY completed. Exiting.... Switch#config t Enter configuration commands, one per line. End with CNTL/Z. Switch(config)#interface fa0/2 Switch(config-if)#switchport access vlan 40 Switch(config-if)#exit Switch(config)#exit Switch# %SYS-5-CONFIG_I: Configured from console by console
Paso3: ciudad Monterrey
Switch>enable Switch#vlan database % Warning: It is recommended to configure VLAN from config mode, as VLAN database mode is being deprecated. Please consult user documentation for configuring VTP/VLAN in config mode. Switch(vlan)#vlan 60 name Monterrey VLAN 60 added: Name: Monterrey Switch(vlan)#exit APPLY completed. Exiting.... Switch#config t Enter configuration commands, one per line. End with CNTL/Z. Switch(config)#interface fa0/3 Switch(config-if)#switchport access vlan 60 Switch(config-if)#exit Switch(config)#exit Switch# %SYS-5-CONFIG_I: Configured from console by console
Paso4: ciudad de Guadalajara
Switch>enable Switch#vlan database % Warning: It is recommended to configure VLAN from config mode, as VLAN database mode is being deprecated. Please consult user documentation for configuring VTP/VLAN in config mode. Switch(vlan)#vlan 80 name Guadalajara VLAN 80 added: Name: Guadalajara Switch(vlan)#exit APPLY completed. Exiting.... Switch#config t Enter configuration commands, one per line. End with CNTL/Z. Switch(config)#interface fa0/4 Switch(config-if)#switchport access vlan 80 Switch(config-if)#exit Switch(config)#exit Switch# %SYS-5-CONFIG_I: Configured from console by console
Paso5: ciudad de Guanajuato
Switch(vlan)#vlan 100 name Guanajuato
VLAN 100 added:
Name: Guanajuato
Switch(vlan)#exit
APPLY completed.
Exiting....
Switch#config t
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#interface fa0/5
Switch(config-if)#switchport access vlan 100
Switch(config-if)#exit
Switch(config)#exit
Switch#
%SYS-5-CONFIG_I: Configured from console by console
Parte 5: Asignarle direccion ip a las PC’s
Paso1: pc’s de la ciudad Toluca
Recordando que el rango disponible para esta ciudad es de: 150.81.10.1 a 6
PC0 PC1
Paso2: pc’s de la ciudad DF
Recordando que el rango disponible de esta ciudad es de: 150.81.10.9 a 14
PC2 PC3
Paso3: pc’s de la ciudad Monterrey
Recordando que el rango disponible de esta ciudad es de: 150.81.10.17 a 22
PC4 PC5
Paso4: pc’s de la ciudad Guadalajara
Recordando que el rango disponible de esta ciudad es de: 150.81.10.25 a 30
PC6 PC7
Paso5: pc’s de la ciudad Guanajuato
Recordando que el rango disponible de esta ciudad es de: 150.81.10.33 a 38
PC8 PC9
Pruebas Se realizaran pruebas enviando paquetes a las diversas pc’s
Como podemos ver en las imágenes
los paquetes se mandaron
correctamente a sus pc’s
Conclusiones
En esta práctica se realizaron 5 subredes, y cada una de ellas debe tener:
Nombre
Dirección de red
Dirección brodcast
Y su máscara de subred
Es importante saber que rengo disponible tiene cada dirección de red para saber que ip’s se le
asignara a cada pc’s
Sin olvidar que se crearon VLAN para cada una de las ciudades y realizaron pruebas de pc’spara
verificar que los paquetes se enviaron.