invest. componentes y hot melt process
DESCRIPTION
Trabajo de componentesTRANSCRIPT
![Page 1: Invest. Componentes y Hot Melt Process](https://reader038.vdocumento.com/reader038/viewer/2022103123/55cf8fab550346703b9e9bc0/html5/thumbnails/1.jpg)
INVESTIGACIÓN DE COMPONENTES
Victor Montaño – A00807611
Cilindro
Proveedor: Festo
Catalogo: https://www.festo.com/net/SupportPortal/Files/12373/PSI_236_1_es.pdf
![Page 2: Invest. Componentes y Hot Melt Process](https://reader038.vdocumento.com/reader038/viewer/2022103123/55cf8fab550346703b9e9bc0/html5/thumbnails/2.jpg)
Valvula
Proveedor: Festo
Catalogo: http://www.festo.com/cat/en-us_us/products__13514
![Page 3: Invest. Componentes y Hot Melt Process](https://reader038.vdocumento.com/reader038/viewer/2022103123/55cf8fab550346703b9e9bc0/html5/thumbnails/3.jpg)
Manifold
Proveedor: Festo
Catalogo: http://www.festo.com/cat/en-us_us/products__13514
![Page 4: Invest. Componentes y Hot Melt Process](https://reader038.vdocumento.com/reader038/viewer/2022103123/55cf8fab550346703b9e9bc0/html5/thumbnails/4.jpg)
Mangueras
Proveedor: Festo
Catalogo: http://www.festo.com/cat/es-mx_mx/products_070200
![Page 5: Invest. Componentes y Hot Melt Process](https://reader038.vdocumento.com/reader038/viewer/2022103123/55cf8fab550346703b9e9bc0/html5/thumbnails/5.jpg)
Coples Neumáticos
Proveedor: Goma y Filtros
Catalogo: http://www.gomafiltros.com/listas/indu0123/Acoples_Neumaticos.pdf
![Page 6: Invest. Componentes y Hot Melt Process](https://reader038.vdocumento.com/reader038/viewer/2022103123/55cf8fab550346703b9e9bc0/html5/thumbnails/6.jpg)
Sensores
Proveedor:
Catálogo: http://www.festo.com/cat/es-mx_mx/products_SOPA
![Page 7: Invest. Componentes y Hot Melt Process](https://reader038.vdocumento.com/reader038/viewer/2022103123/55cf8fab550346703b9e9bc0/html5/thumbnails/7.jpg)
Clemas
Proveedor: Weidmuller
Catálogo: http://mexico.newark.com/weidmuller/102000-wdu2-5/terminal-block-din-2pos-30-to/dp/05M3058?CMP=AFC-OP
![Page 8: Invest. Componentes y Hot Melt Process](https://reader038.vdocumento.com/reader038/viewer/2022103123/55cf8fab550346703b9e9bc0/html5/thumbnails/8.jpg)
HOT MELT PROCESS
Sergio Chavez Alvarado – A00810117Victor Montaño – A00807611
Principio de operación:
Nordson® Unity dispense systems provide accurate dispensing and optimize efficiency of heated materials from 30 cc syringes and 294 ml cartridges, and are ideally suited to dispense heated PUR adhesives. Unity dispensers help extend the useful life of the syringe to maximize material use and minimize residual waste.
Como funciona:
Consistent dispensing and clean cutoff for beads or dots. Patented jetting technology means Z plane doesn’t need to constantly adjust for changing
surface contours. Applies at high speeds with precise accuracy. Accommodates a wide variety of hot melt materials including polyurethane (PUR). Easily dispenses into 0.5 mm grooves and other challenging geometries. Optimizes adhesive wetting of substrates for improved strength and impact resistance.
Parámetros:
![Page 9: Invest. Componentes y Hot Melt Process](https://reader038.vdocumento.com/reader038/viewer/2022103123/55cf8fab550346703b9e9bc0/html5/thumbnails/9.jpg)
Equipos comerciales:
Proveedor:
Nordson Instruments
Limitaciones del equipo:
Capacidad de contenedores material.
![Page 10: Invest. Componentes y Hot Melt Process](https://reader038.vdocumento.com/reader038/viewer/2022103123/55cf8fab550346703b9e9bc0/html5/thumbnails/10.jpg)
Velocidad de aplicación
Melt Rate (per hour) 9 to 12 kg/hr (20 to 27 lbs/hr
Limitaciones del proceso:
Aplicación en ranuras muy pequeñas
No puede trabajar a más de 200°C
Degradación del equipo.
Costo: Aprox: $9,000 Dlls.
Mantenimiento:
Equipo libre de mantenimiento. Solo se necesita limpiar y cambiar las boquillas mensualmente.
Implementación (Voltaje, Corriente, Protocolos):
200 to 240 VAC, 1 or 3 phase, 50/60 Hz
1 phase N/PE 50/60 Hz400/230 VAC
2 Amp
Maximum Working Hydraulic Pressure 10.3 MPa (1500 psi)