Polyk

en P

ipel

ine

Coat

ings

Liquid Adhesive SystemsBasic UseThese Polyken liquid adhesives are recommended for use with Polyken High Temp coating systems. The systems consist of synthetic thermoplastic elastomers blended with heat-activated polymeric resins dissolved in an organic solvent system. When the pipe is heated the result is a cross-linked bonding between primer, coating and pipe, which results in excellent soil stress & shear resistance, superior adhesion, low cathodic disbondment from the pipe substrate. Moreover, these systems contain industry proven SCC inhibitors which protect against stress corrosion cracking and further enhance the coating's protection.

Liquid adhesive system used with the Polyken high temperature coating system, GoCoat 250 (1600/1636). Liquid adhesive system is recommended primarily for machine & hand application to new or smooth pipe surfaces.

Liquid adhesive system is ideal for hand application to rough, conditioned, or grit-blasted pipe surfaces. It provides a uniformly smooth, instant tack on the pipe surface for Polyken 1636/1600 coatings.

Liquid adhesive system is for use with the Polyken shear resistant coating system, GoCoat 200 (2000/2036). Excellent for coating pipe laid in identified areas of severe soil stress, 2019 is designed primarily for machine application to new or smooth pipe surfaces.

Liquid adhesive system is ideal for hand application to rough, reconditioned, or grit-blasted pipe surfaces. It provides a uniformly smooth instant tack surface for Polyken 2036/2000 coatings.

Polyken # 1619

System Componenets

Polyken # 1627 Polyken # 2019

# 1619, 1627, 2019, 2027

Polyken # 2027

DS-

1619

/162

7/20

19/2

027-

REV

5-03

08

®

Note:

and storage guideline from Covalence.

Description

SolventTotal SolidsWeight/GallonWeight/LiterViscosity

Color

# 1619

Toluene & Heptane20%7.4 lb.87 kgThin Syrup

Clear

# 1627

V.M. & P Naptha27%6.9 lb.81 kgMedium Syrup

Clear

# 2019Rubber/ResinsHeptane20%6.3 lb..74 kgThin Syrup

# 2027Rubber/ResinsV.M. & P Naptha28%7.1 lb.84 kgMedium Syrup

DS-

1619

-162

7-20

19-2

027-

REV

5-03

08

Item Nr. Description614925 1619 LIQUID ADH 5 GAL-18.9L614922 1619 LIQUID ADH 55 GAL-208.2L

614924 1627 LIQUID ADH 55 GAL-208.2L614560 1627 PRIMER 1 GAL(C4)

614185 2019S PRIMER 5 GAL(OH)

614179 2027 PRIMER 1 GAL(C4)614180 2027 PRIMER 5 GAL

Ordering Information

Berry Plastics warrants that the product conforms to its chemical and physical description and is appropriate for the use stated on the technical data sheet when used in compliance with Berry Plastics written instructions. Since many installation factors are beyond the control of Berry Plastics , the user shall determine the suitability of the products for the intended use and assume all risks and liabilities in connection herewith. Berry Plastics liability is stated in the standard terms and conditions of sale. Berry Plastics makes no other warranty either expressed or implied. All information contained in this technical data sheet is to be used as a guide and is subject to change without notice. This technical data sheet supersedes all previous data sheets on this product.

Local Distributor / Representative:

For contact details of local Distributors / RepresentativesPlease visit www.berrycpg.com.

Franklin, MA, USA Tel: +1 508 918 1714US Toll Free: +1 800 248 0149Fax: +1 508 918 1910CPG@berryplastics.com

Tijuana, Mexico Tel US: +1 866 9 CORROSIONFax US: +1 619 424 4258Tel Mexico: +52 664 607 0926 Fax Mexico: +52 664 623 6463CPGTJ@berryplastics.com

Houston, TX, USATel: +1 713 676 0085US Toll Free: 01 888 676 7202Fax:+1 713 676 0086CPGH@berryplastics.com

Aarschot, BelgiumTel: +32 16 55 36 00Fax: +32 16 55 36 74CPGE@berryplastics.com

Baroda, IndiaTel: +91 2667 264721Fax: +91 2667 264724CPGIN@berryplastics.com

www.berrycpg.com

Headquarters : Berry Plastics Tapes & Coatings Division, Franklin MA, USA

CORROSION PROTECTION GROUP