Download - estructuras tensadas
-
8/2/2019 estructuras tensadas
1/52
ACIARIUM
C/Talgo. Parc.157-158, Polgono Industrial de Venta de Baos.C.P 34200 Venta de Baos (Palencia). ESPAA
Tel. 933.906.145 Fax. 933.906.145www.aciarium.com
ACIARIUM
Soluciones y accesorios
industriales-arquitecturalespara cable.
Wire rope solutions andaccessories for
industry-architecture
-
8/2/2019 estructuras tensadas
2/52
EYE TERMINALS
High Polished Stainless Steel -AISI 316
ART. NO. WIRE DIM. D1 D2 D3 L1 L2 L3 A B.L. KG. KG/100 PACK
90002 2 /6" 2.2 5.5 5.5 49 32 3 3 800 0.9 00
90025 2.5 3/32" 2.8 5.5 5.5 49 32 3 3 800 0.8 0090003 3 /8" 3.5 6.4 6.5 58 38 4 4 300 .3 00
90004 4 5/32" 4.4 7.5 8.5 67 45 7 5 2350 2.3 00
90005 5 3/6" 5.3 9.0 0.5 79 5 2 6 3500 3.9 25
90006 6 - 6.5 2.6 3.0 94 64 25 8 5600 8.7 0
90006X 6 - 6.5 2.6 3.2 05 64 28 0 6200 .2 0
90007 7 9/32" 7.5 4.2 3.0 04 70 27 9 5600 .5 0
90007X 7 9/32" 7.5 4.2 3.2 0 70 28 0 6200 3.5 0
90008 8 5/6" 8.4 6.0 4.5 24 83 30 0 7600 7.0 0
90008X 8 5/6" 8.4 6.0 6.5 4 83 36 2 9800 23.5 0
9000 0 - 0.5 7.8 6.3 37 89 35 9800 25.0 0
9000X 0 - 0.5 7.8 9.5 65 00 40 6 3000 38.0 0
9002 2 - 2.5 20.0 9.3 56 05 40 5 3000 4.5 59002X 2 - 2.5 2.4 9.3 78 20 42 5 3000 4.0 5
9004 4 - 4.8 25.0 23.0 206 40 47 8 7000 75.6 5
9006 6 - 7.0 28.0 26.0 232 60 53 20 24000 02.0 5
9009 9 - 20.0 34.5 28.5 302 200 65 25 27000 209.0 BULK
90022 22 - 23.5 40.4 33.0 348 230 70 30 3000 34.0 BULK
90026 26 27.5 46.0 36.0 400 280 77 30 43000 425.0 BULK
Note: All breakloads are determined by eye (D3)
L2
L1
D3
D1 A
D2
L3
L1
L2
L4
L3
D1
D2
B
D3
A
EYE TERMINALS -SMALL
Stainless Steel - AISI 316
CAT.NO. WIRE DIM. D1 D2 D3 L1 L2 L3 L4 A B KG/100
A200503 3,0 /8" 3.5 5.5 5.3 36 25 6.0 2.50 9 0.5
A200504 4,0 5/32" 4.4 6.4 5.3 38 25 2 6.5 3.00 0 0.7
A200505 5,0 3/6" 5.3 7.5 5.3 43 30 3 7,0 3.75 ,0
A200606 6,0 - 6.5 9,0 6.3 62 40 6 8.5 4.50 4 .9
Break load 50% of x9 wire
Eye terminals are engraved with thewire size and swage depth, making
them
easier to work with and to press orswage onto the wire. Eyes are mainly
used as an attachment to rigging
screws or forks.
Small Eye terminals are for lighterarchitectural terminations . The fo-
cus of the design is the size.Overalldimensions have thus been reducedto a minimum. The small ttings are
suitable for hand crimping or roll
swaged using a standard machineand smaller die.
C/Talgo. Parc.57-58,Polgono Industrial de Venta de Baos.C.P 34200 Venta de Baos (Palencia)Tel. 933.906.45 Fax. 933.906.45www.aciarium.com / [email protected]
-
8/2/2019 estructuras tensadas
3/52
2
SWAGELESS EYE TERMINALS
High Polished Stainless Steel -AISI 316
ART. NO. WIRE DIM. A L1 L2 L3 D2 KW KW1 B.L. KG. KG/100
82903 3 /8" 5.5 50 58 26.5 6.3 0 2 750 4.0
82904 4 5/32" 7 58 68 3.0 8.3 3 4 500 7.3
82905 5 - 8 70 8 37.0 0.3 4 6 280 9.8
82906 6 /4" 9 83 97 45.0 2.3 7 9 3700 5.0
82907 7 9/32" 9 89 05 50.5 2.3 8 2 4700 2.2
82908 8 5/6" 0 03 2 52.5 4.3 9 24 5600 28.
8290 0 - 3 6 35 65.0 6.3 24 27 8300 46.0
8292 2 - 5 37 60 7.5 9.5 27 32 2000 72.0
8294 4 - 8 60 85 85.0 22 30 36 4000 0.0
8296 6 - 20 70 97 98.0 25 32 4 23000 60.0
Note: All breakloads are determineed by wedges (jaws) and eye (D2)
Assemble instruction look at page 63
A
L2
L3
D2
KW
WIRE
L1
SWAGELESS EYE TERMINALS - SMALL
High Polished Stainless Steel -AISI 316
ART. NO. WIRE DIM. A L1 L2 L3 D2 KW KG/100
A82903 3 /8" 5 42 36.0 3.0 5.3 8 0
A82904 4 5/32" 6 45 37.5 4.5 5.3 0 0
A82905 5 - 6 53 44.5 8.5 6.3 2 0
A82906 6 /4" 8 60 50.5 2.5 8.3 4 0
Breakload: 50% of x9 wire
A
L2
L1
D2 KWKW1
D1 WIRE SIZE
L3
Safe, reliable and machine free
swaging of wire, with the fastest
swageless system on the market.Swageless eye terminals are Lloyds
approved and ideal for site workwhere a professional swaging tool
would normally be required.
Secure, reliable and machine free
swaging of wire, with the fastest
swageless system available.The small swageless eye terminal is
easy to use and ideal for site work
where a professional swaging toolwould normally be required. The
small swageless eye terminal guar-antees at least 50% break load ofthe wire.
NEWS
-
8/2/2019 estructuras tensadas
4/52
3
L1L2
L3
A D
D1
WELDED FORK TERMINALS
High Polished Stainless Steel -AISI 316
CAT. NO. WIRE DIM L1 L2 L3 D D1 A B.L. KG. KG/100 PACK
00402 2 /6" 55 0 32.0 4.0 5.5 6.5 500 2.0 25
00502 2 /6" 58 2 32.0 5.0 5.5 7.5 800 2.0 25
00525 2.5 3/32" 58 2 32.0 5.0 5.5 7.5 800 2.0 25
00503 3 /8" 67 2 38.0 5.0 6.4 7.5 800 2.3 25
00603 3 /8" 68 3 38.0 6.0 6.4 9.5 300 2.8 25
00504 4 5/32" 7 2 45.0 5.0 7.5 7.5 800 2.7 25
00604 4 5/32" 73 3 45.0 6.0 7.5 9.5 300 3.4 25
00804 4 5/32" 77 5 45 8.0 7.5 .0 2350 4.9 25
00605 5 3/6" 83 3 5 6.0 9.0 9.5 300 4. 25
00805 5 3/6" 87 5 5 8.0 9.0 .0 2350 5.5 0
09505 5 3/6" 9 9 5 9.5 9.0 2.0 3500 7.2 0
00806 6 - 99 5 64 8.0 2.6 .0 2350 0.0 009506 6 - 04 9 64 9.5 2.6 2.0 3500 .3 0
006 6 - 08 23 64 .0 2.6 3.0 4700 3.9 0
0206 6 - 0 25 64 2.0 2.6 4.0 500 7.6 0
0207 7 9/32" 9 25 70 2.0 4.2 4.0 500 8. 0
0208 8 5/6" 36 25 83 2.0 6.0 4.0 500 2.6 0
0608 8 5/6" 45 33 83 6.0 6.0 8.0 9600 25.5 0
040 0 - 5 33 89 4.0 7.8 8.0 7600 35.0 0
040L 0 - 49 3 89 4.0 7.8 22.0 7600 36.0 0
062 2 - 74 33 05 6.0 20.0 8.0 9600 60.0 5
062L 2 - 7 3 05 6.0 20.0 22.0 9600 60.0 5
092 2 - 89 52 05 9.0 20.0 24.0 3000 66.0 5
092L 2 - 87 48 05 9.0 20.0 30.0 3000 66.0 5
092X 2 - 205 52 20 9.0 2.4 24.0 3000 75.0 5
094L 4 - 22 48 40 9.0 25.0 30.0 3000 75.0 5
0224 4 - 232 57 40 22.0 25.0 30.0 7000 2.7 5
0254 4 - 235 62 40 25.4 25.0 30.0 24000 25.0 5
0256 6 - 264 62 60 25.4 28.0 30.0 24000 40.0 5
Note: All breakloads are determined by clevis pin
A wide range of hand welded fork ter-minals has been setting standards formany years. Featured here are the
most common size / fork variations:
- all with wire size and swage depthmarking. Fork terminals are amongst
the most commonly used wire end t-
tings, they are normally attached topre drilled anchor plates or steel con-
structions. Also used in combinationwith toggles, eyes or U-bolts.
C/Talgo. Parc.57-58,Polgono Industrial de Venta de Baos.C.P 34200 Venta de Baos (Palencia)Tel. 933.906.45 Fax. 933.906.45www.aciarium.com / [email protected]
-
8/2/2019 estructuras tensadas
5/52
4
FORK TERMINALS MACHINEDHigh Polished Stainless Steel -AISI 316
ART. NO. WIRE L1 L2 L3 A D D1 B.L. KG. KG/100 PACK
7292 2 97 45 05 20 9.0 20.0 3000 00 BULK
72224 4 239 49 40 22 22.0 25.0 7000 70 BULK
72256 6 27 52 60 25 25.4 28.0 24000 20 BULK
72289 9 327 55 200 30 28.0 34.5 25500 330 BULK
723222 22 377 67 230 35 32.0 40.4 3000 480 BULK
723526 26 434 67 280 35 35.0 46.0 43000 700 BULK
Note: All breakloads are determined by clevis pin
L1
L2
L3
A
DD1
L1
D1
AD3
L2
D2
L3
As demand for larger wire sizes has
been growing, so has the range oflarger machined ttings. The ma-chined forks are, , marked with wire
size and swage depth marking for
ease of use.
Small fork terminals are for lighter
architectural xing of wires.The fo-
cus of the design is the size. Overalldimensions have thus been reduced
to a minimum. The small ttings are
suitable for hand crimping with Arc-
tool & Arctool4, see page 60, or roll
swaged using a standard machineand smaller die.
FORK TERMINALS WELDED - SMALL
High Polished Stainless Steel -AISI 316
ART. NO. WIRE L1 L2 L3 D1 D2 D3 A KG/100
A360503 3 50 25 2,0 5,0 5,50 3,5 7,5 ,0
A360504 4 50 25 2,0 5,0 6,35 4,4 7,5 ,5
A360605 5 58 30 3,0 6,0 7,50 5,3 9,5 2,2
A360806 6 72 40 5,0 8,0 9,00 6,5 ,0 3,7
A360808 8 85 50 5,0 8,0 2,58 8,4 ,0 8,0
A3600 0 06 60 9,5 9,5 6,00 0,5 2,5 4,
Breakload: 50% of x9 wire
-
8/2/2019 estructuras tensadas
6/52
5
L2L1
D1
A
D2
D4
L3
D3
L4
L1
L2
L3
A D2
KW KW1
D1 WIRE SIZE
L4
SWAGELESS FORK TERMINALSHigh Polished Stainless Steel -AISI 316
ART. NO. A L1 L2 L3 L4 WIRE DIM. D2 KW KW1 B.L KG. KG/100
840603 6 55 63 8 29.0 3 /8" 6 4 2 750 5.5
840804 8 62 73 8 35.0 4 5/32" 8 9 4 500 7.3
84005 0 72 83 0 42.0 5 - 0 22 6 280 5
84206 2 82 95 2 47.5 6 /4" 2 27 9 3700 23
84207 2 02 5 3 54.5 7 9/32" 2 29 2 4700 29
84408 4 03 8 4 58.0 8 5/6" 4 30 24 5600 38
8460 6 7 35 6 70.0 0 - 6 36 27 8300 63
8492 8 42 62 6 75.0 2 - 9 42 32 2000 97
84224 2 62 9 9 88.0 4 - 22 46 36 4000 3584256 23 84 27 22 02.0 6 - 25 55 4 23000 25
Note: All breakloads are determined by wedgws (jaws) and clevis pin
Assemble instruction look at page 63
Small machined fork terminals arefor lighter architectural xing of wires.
The focus of the design is the size.
Overall dimensions have thus beenreduced to a minimum, leaving
markings out. The small ttings are
suitable for hand crimping with Arc-tool & Arctool4, see page 60, or roll
swaged using a standard machine
and smaller die.
Safe, reliable and machine free
swaging of wire, with the fastestswageless system on the market.
Swageless fork terminals are Lloydsapproved and ideal for site work
where a professional swaging toolwould normally be required.
FORK TERMINALS - MACHINED -SMALL
Stainless Steel - AISI 316
ART. NO WIRE L1 L2 L3 L4 D1 D2 D3 D4 A KG/100
A390503 3 4 30 25,0 6,0 5,00 5,5 3,5 5,5 ,03
A390504 4 43 3 25,0 8,5 5,00 3 6.35 4,4 6,5 ,43
A390505 5 5 36 30,0 8,0 5,00 3 7,5 5,3 6,5 2,23
A390606 6 67 42 40,0 ,0 6,00 6 9 6,5 8,5 3,66
Breakload: 50% of x9 wire
C/Talgo. Parc.57-58,Polgono Industrial de Venta de Baos.C.P 34200 Venta de Baos (Palencia)Tel. 933.906.45 Fax. 933.906.45www.aciarium.com / [email protected]
-
8/2/2019 estructuras tensadas
7/52
6
SWAGELESS FORK TERMINALS - SMALL
High Polished Stainless Steel -AISI 316
ART. NO. WIRE DIM. A L1 L2 L3 L4 D1 D2 KW KG/100
A840503 3 /8" 5.3 45 6.5 2 5.5 5 8 0
A840504 4 5/32" 6.3 48 8 4 7.0 5 5 0 0
A840605 5 - 6.3 56 22 8 8.0 6 6 2 0
A840806 6 /4" 8.3 62 24.5 20 8.5 8 8 4 0
Breakload: 50% of x9 wire
L1
L2
L3 L4
A
D1
WIRE
D2
KW
L1
L3L4
L5 D1
WIRE
D2
L2
SPELTER SOCKET - FORK
High Polished Stainless Steel -AISI 316
ART. NO. WIRE L1 L2 L3 L4 L5 D1 D2 B.L KG. KG/100
R84289 9 258 2 55 37 30 28 70 25500 327
R843222 22 309 45 67 43 35 32 80 3000 485
R843526 26 366 54 72 46 35 35 85 43000 685
R844832 32 435 205 93 56 44 48 0 76000 405
Note: All breakloads are determined by clevis pin
Only on request
The spelter socket is a NEW stain-less steel product. Using the well
known & tested method of brooming/ spreading the wire and glueing it in
a socket by use of Wirelock.We produce a exible range of end
ttings with high break loads and no
need for special tools.
Secure, reliable and machine free
swaging of wire, with the fastestswageless system available.
The small swageless fork terminal iseasy to use and ideal for sitework
where a professional swaging tool
would normally be required. Thesmall swageless fork terminal guar-
antees at least 50% break load of
the wire.
NEWS
NEWS
Community Design Registration 2006
C/Talgo. Parc.57-58,Polgono Industrial de Venta de Baos.C.P 34200 Venta de Baos (Palencia)Tel. 933.906.45 Fax. 933.906.45www.aciarium.com / [email protected]
-
8/2/2019 estructuras tensadas
8/52
7
DOMEHEAD TERMINAL - SMALL
Stainless Steel - AISI 316
ART.NO. WIRE DIM L1 L2 L3 A A1 A2 KG/100
A00003 3,0 /8" 35 25 32.0 3.5 5.5 8 0.5
A00004 4,0 5/32" 35 25 32.0 4.4 6.4 0 0.7
A00005 5,0 3/6" 4 30 37.0 5.3 7.5 2 ,0
A00006 6,0 - 52 40 47.0 6.5 9,0 4 .9
Breakload: 50% of x9 wire
L2
A2
A1
L3
L1
A
DOMEHEAD TERMINALS
High Polished Stainless Steel -AISI 316
ART. N0. WIRE DIM. L1 L2 L3 D1 D2 D3 KG/100 PACK
660003 3 /8" 52.0 48.5 38 6.35 0.0 3.5 . 20
660004 4 5/32" 59.0 55.5 45 7.50 .5 4.4 2.4 20
660005 5 3/6" 66.5 62.5 5 9.00 4.0 5.3 3.8 20
660006 6 - 79.0 74 64 2.58 8.0 6.5 7.9 20
L1
L2
L3
A2
A1 Domehead terminals are engraved
with wire size and swage depth mark-ing, making them easier to work with
and to press or swage onto the wire.
Ball for domehead, page 46!
The small domehead terminals are
for lighter architectural xing of wires.
The focus of the design is the size.
Overall dimensions have thus been
reduced to a minimum, leaving mark-
ings out. The small ttings are suit-able for hand crimping with Arctool
& Arctool4, see page 60.
C/Talgo. Parc.57-58,Polgono Industrial de Venta de Baos.C.P 34200 Venta de Baos (Palencia)Tel. 933.906.45 Fax. 933.906.45www.aciarium.com / [email protected]
-
8/2/2019 estructuras tensadas
9/52
8
STEMBALL TERMINAL
High Polished Stainless Steel -AISI 316
ART. NO. WIRE DIM. L1 L2 L3 L4 D1 D2 KG/100 PACK
620003 3 /8" 58 54.0 38 3.0 3.5 6.4 . 20
620004 4 5/32" 69 63.0 45 6.0 4.4 7.5 2.4 20
620005 5 3/6" 79 72.0 5 9.0 5.3 9.0 3.8 20
620006 6 - 90 84.0 64 20.0 6.5 2.6 7.9 20
620007 7 9/32" 94 87.0 70 2.3 7.5 4.2 0.0 20
620008 8 5/6" 6 08.0 83 26.3 8.4 6.0 6.9 0
62000 0 - 29 9.0 89 27.5 0.5 7.8 23.5 0
62002 2 - 45 35.0 05 28.0 2.5 20.0 26.7 5
L1
L2
L3
D2
D1L4
CONE TERMINALS - SMALL
Stainless Steel - AISI 316
ART.NO. WIRE DIM L1 L2 L3 A A1 A2 KG/100
A0003 3,0 /8" 35 25 32.5 3.5 5.5 8 0.5
A0004 4,0 5/32" 35 25 32.0 4.4 6.4 0 0.7
A0005 5,0 3/6" 4 30 38.0 5.3 7.5 2 ,0
A0006 6,0 - 52 40 48.5 6.5 9,0 4 .9
Breakload: 50% of x9 wire
L1
L3
L2
A A2
A1
Stemball terminals are marked with
wire size and wire-hole depth, to
make it easier to work with and pressor swage onto the wire.
The small cone terminals are for
lighter architectural xing of wires.
The focus of the design is the size.
Overall dimensions have thus been
reduced to a minimum, leaving mark-ings out. The small ttings are suit-
able for hand crimping with Arctool
& Arctool4, see page 60.
Angle hinge for cone ter-
minals page 49
C/Talgo. Parc.57-58,Polgono Industrial de Venta de Baos.C.P 34200 Venta de Baos (Palencia)Tel. 933.906.45 Fax. 933.906.45www.aciarium.com / [email protected]
-
8/2/2019 estructuras tensadas
10/52
9
TOGGLE TERMINAL
High Polished Stainless Steel -AISI 316
ART. NO. WIRE DIM. D1 D2 D3 L1 L2 A B C B.L. KG. KG/100 PACK
500603 3 /8" 3.5 6.4 6.4 8 38 0 6 2.8 300 4.3 0
500804 4 5/32" 4.4 7.5 8.0 94 45 9 5.0 2350 7.3 0
509505 5 3/6" 5.3 9.0 9.5 6 5 3 25 20.3 3500 3.8 0
5006X 6 - 6.5 2.6 .0 35 64 5 25 9.5 400 27.3 0
50206X 6 6.5 2.6 2.7 5 64 8 3 24.7 6200 33.4 5
50207X 7 9/32" 7.5 4.2 2.7 57 70 8 3 24.7 6200 35.7 5
50308 8 5/6" 8.4 6.0 2.7 70 83 8 3 24.7 6200 37.5 5
50608X 8 5/6" 8.4 6.0 5.9 98 83 20 37 29.0 9800 59.7 5
5060 0 - 0.5 7.8 5.9 92 89 20 37 29.0 9800 64.3 5
5090X 0 - 0.5 7.8 9.0 228 00 24 42 32.5 3000 00.0 BULK
5092X 2 - 2.5 2.4 9.0 240 20 24 42 32.5 3000 03.0 BULK
50224 4 - 4.8 25.0 22.0 277 40 26 46 34.9 7000 70.2 BULK50256 6 5/8" 7.0 28.0 25.4 33 60 29 53 40.3 24000 265.5 BULK
50289 9 3/4" 20.0 34.5 28.0 399 200 34 60 46.5 25500 62.0 BULK
503222 22 7/8" 23.5 40.4 32.0 463 230 40 70 54.0 3000 570.0 BULK
503526 26 " 27.5 46.0 36.0 58 280 44 80 62.0 43000 750.0 BULK
L2
L1
A
B
D3
D2
D1
C
WALL TOGGLE TERMINAL
High Polished Stainless Steel -AISI 316
ART. NO. WIRE DIM. L1 L2 L3 L4 D1 D2 B.L. KG. KG/100 PACK
9503 3 3.5 74 38 40 4 6.4 6.4 250 4.0 BULK
9504 4 4.4 87 45 44 8 8.3 7.5 2350 6.5 BULK
The exible toggle terminal is marked
with wire size & wire-hole depth mak-
ing it easier to work with and to press
or swage onto the wire. Its uses arefor diagonal or angle installations and
also to minimize the risk of fatigue
due to sideway loads.
The NEW exible wall toggle termi-
nal is marked with wire size & wire-
hole depth for ease of use.
NEWS
C/Talgo. Parc.57-58,Polgono Industrial de Venta de Baos.C.P 34200 Venta de Baos (Palencia)Tel. 933.906.45 Fax. 933.906.45www.aciarium.com / [email protected]
-
8/2/2019 estructuras tensadas
11/52
0
A
C
BL1
L2
WIRE SIZED L3
SWAGELESS TOGGLE TERMINAL
High Polished Stainless Steel -AISI 316L
ART. NO. WIRE DIM. L1 L2 L3 A B C D B.L. KG.
830603 3 - 7 50 4 8 5,0 2,0 6,0 750
830804 4 5/32" 90 6 8 0 9,0 5,0 8,0 500
83005 5 - 08 75 23 2 25,5 2,0 9,5 280
8306 6 - 25 88 30 5 28,5 23,0 ,0 3700
83207 7 9/32" 40 00 30 8 3,0 24,7 2,7 4700
83208 8 5/6" 48 02 30 8 30,0 23,7 2,7 5600
8360 0 - 76 25 35 20 40,0 32,0 6,0 8300
8392 2 - 206 38 40 24 45,5 36,0 9,0 2000
83224 4 - 230 57 50 26 46,0 35,0 22,2 7000
83256 6 - 26 80 60 29 53,0 40,0 25,4 23000
Note: All breakloads are determined by clevis pin
Assemble instruction look at page 63
WIRE
L1
D1 D2
2 x D3
L2
SWAGELESS WALL TOGGLE
High Polished Stainless Steel -AISI 316
ART. NO. WIRE D1 D2 D3 L1 L2 B.L. KG. KG/100
83503 3 4 40 6,4 64 43 700 5,8
83504 4 8 44 8,3 79 50 500 9,2
Assemble instruction look at page 63
Safe, reliable and machine free
swaging of wire, with the fastestswageless system on the market.
The swageless toggle terminal is
Lloyds approved and ideal for site
work where a exible wire attach-ment is required and there is a risk of
sideway load fatigue .
Safe, reliable and machine free
swaging of wire, with the fastest
swageless system on the market.The swageless wall toggle terminal
is easy to use and ideal for site workwhere a exible wire termination is
required.
NEWS
NEWS
C/Talgo. Parc.57-58,Polgono Industrial de Venta de Baos.C.P 34200 Venta de Baos (Palencia)Tel. 933.906.45 Fax. 933.906.45www.aciarium.com / [email protected]
-
8/2/2019 estructuras tensadas
12/52
THREAD TERMINALS
Stainless Steel -AISI 316
NO. RIGHT NO. LEFT G WIRE L1 L2 L3 D A NV B.L. KG. KG/100 PACK
900204 - M4 2 79 32 34 5,50 2,2 4,0 50 ,2 BULK
900205 90205 M5 2 87 32 42 5,50 2,2 4,5 800 ,4 BULK
902505 92505 M5 2,5 87 32 42 5,50 2,8 4,5 800 ,5 BULK
900306 90306 M6 3 00 38 48 6,35 3,5 5,0 250 2,0 BULK
900406 90406 M6 4 0 45 48 7,50 4,4 6,0 250 2,4 BULK
900408 90408 M8 4 7 45 57 7,50 4,4 6,0 2350 3,0 BULK
900508 90508 M8 5 23 5 57 9,00 5,3 7,0 2350 4,0 BULK
90050 9050 M0 5 30 5 63 9,00 5,3 7,0 3500 4,5 BULK
90060 9060 M0 6 45 64 63 2,58 6,5 ,0 3500 8,4 BULK
90062 9062 M2 6 62 64 80 2,58 6,5 ,0 500 ,0 BULK
90072 9072 M2 7 70 70 80 4,20 7,5 2,0 500 3,3 BULK
90074 9074 M4 7 80 70 89 4,20 7,5 2,0 5900 6,0 BULK
90082 9082 M2 8 85 83 80 6,00 8,4 4,0 500 9,2 BULK
90084 9084 M4 8 94 83 89 6,00 8,4 4,0 5900 20,0 BULK
90086 9086 M6 8 203 83 00 6,00 8,4 4,0 8000 23,0 BULK
9006 906 M6 0 20 89 00 7,80 0,5 5,0 8000 35,0 BULK
90020 9020 M20 0 230 89 20 7,80 0,5 5,0 3000 35,0 BULK
90220 9220 M20 2 249 05 20 20,00 2,5 7,0 3000 45,0 BULK
90220X 9220X M20 2 265 20 20 2,40 2,5 9,0 3000 50,0 BULK
90422 9422 M22 4 308 40 40 25,00 4,8 22,0 7000 76,8 BULK
90622 9622 M22 6 333 60 40 28,00 7,0 25,0 7000 97,8 BULK
90624 9624 M24 6 363 60 70 28,00 7,0 25,0 23000 ,0 BULK
90927 9927 M27 9 425 200 80 34,50 20,0 30,0 25500 209.0 BULK902230 92230 M30 22 480 230 200 40,50 23,5 36,0 3000 34,0 BULK
902636 92636 M36 26 550 280 220 46,00 27,5 4,0 43000 470,0 BULK
Note: All breakloads are determined by thread
THREAD TERMINALS DRILLED FOR SPLIT PIN
High Polished Stainless Steel -AISI 316
PLEASE NOTICE: DRILLED FOR SPLIT PIN.
For right hand thread drilled, please use 93 instead of 90
For left hand thread drilled, please use 94 instead of 9or all other measures, please refer to Cat. No. 90 & 9
L1
L2L3
A
DNV
G
TE
The wide range of threaded termi-nals are engraved with wire size and
swage depth making them easy to
use when pressing or swaging themonto the wire. The terminals are avail-
able with left handed or right handed
threads, and also. on request, withsplit pin hole (see details below on
this page), or UNF thread! Threaded
terminals are used to put tension ona wire, either with the help of nuts
and washers or as part of a rigging
screw.
C/Talgo. Parc.57-58,Polgono Industrial de Venta de Baos.C.P 34200 Venta de Baos (Palencia)Tel. 933.906.45 Fax. 933.906.45www.aciarium.com / [email protected]
-
8/2/2019 estructuras tensadas
13/52
2
A
L1
L2 L3
D G
DIY TERMINAL
High Polished Stainless Steel
ART. NO WIRE G D1 L1 L2 L3 L4 B.L. KG. KG/100
A640305 3 M5 53 8 36 34 300 3.4
A640406 4 M6 3 58 9 38 37 400 5.4
A640506 5 M6 4 65 9 45 37 500 6.8
A640608 6 M8 6 73 2 47 45 600 0.7
G 2 x Socket Screw
L1
D1
L4L2 L3
The small threaded terminals are
for lighter architectural terminationof wires. The terminals are available
with left handed or right handed
threads. Dimensions are reducedto a minimum and suitable for hand
crimping with Arctool & Arctool4,
see page 60.
The Do It Yourself terminal is a sim-
ple alternative to the Swageless ter-minals, as it is xed to the wire only
by use of allen-headed screws.
Break loads are , therefore , lowerthan average!
The terminals are delivered with ex-
ternal right handed thread stud only,but as this can be removed, they can
be combined with the rest of the
WDS program and thus offer a widerange of possible DIY solutions. The
ttings can be reused and are as such
a good solution for private use
THREAD TERMINALS - SMALL
Stainless Steel - AISI 316
NO. RIGHT NO. LEFT G WIRE DIM. L1 L2 L3 D A KG/100
A80503 A90503 M5 3 /8" 60.0 25.0 30 5.5 3.5 0.8
A80604 A90604 M6 4 5/32" 65.0 25.0 35 6.4 4.4 .2
A80605 A90605 M6 5 3/6" 73.0 30.0 35 7.5 5.3 .7
A80806 A90806 M8 6 - 88.0 40.0 40 9.0 6.5 2.6
A8008 A9008 M0 8 5/6" 03.0 50.0 45 2.6 8.4 5.8
A820 A920 M2 0 - 8.0 60.0 50.0 6.0 0.5 0.0
Breakload: 50% of x9 wire
NEWS
The DIY terminal has inside thread - delivered with removable thread pin!
C/Talgo. Parc.57-58,Polgono Industrial de Venta de Baos.C.P 34200 Venta de Baos (Palencia)Tel. 933.906.45 Fax. 933.906.45www.aciarium.com / [email protected]
-
8/2/2019 estructuras tensadas
14/52
3
L1
L3
KWKW1
G
D1 WIRE SIZE
L2
SWAGELESS THREAD TERMINALS
High Polished Stainless Steel -AISI 316
NO. RIGHT NO. LEFT WIRE G L1 L2 L3 KW KW1 B.L. KG. kg/100
800305 80305 3 M5 79 58 42 0 2 750 4,2
800306 80306 3 M6 85 63 47 0 2 750 4,5
800406 80406 4 M6 92 63 47 2 4 500 5,6
800408 80408 4 M8 02 72 57 2 4 500 6,6
800508 80508 5 M8 78 57 3 6 280 9,0
80050 8050 5 M0 7 84 63 3 6 280 0,0
80060 8060 6 M0 28 90 63 6 9 3700 5,0
80062 8062 6 M2 45 07 80 6 9 3700 7,0
80072 8072 7 M2 53 0 80 8 2 4700 22,0
80074 8074 7 M4 62 9 89 8 2 4700 25,0
80082 8082 8 M2 62 3 80 9 24 5600 28,0
80084 8084 8 M4 7 22 89 9 24 5600 3,0
80086 8086 8 M6 82 33 00 9 24 5600 40,0
8006 806 0 M6 90 39 00 24 27 8300 48,0
80220 8220 2 M20 227 59 20 27 32 2000 79,0
80422 8422 4 M22 264 9 40 30 36 4000 24,0
80624 8624 6 M24 308 227 70 32 4 23000 75,0
Note: All breakloads are determined by wedges (jaws) and thread
Assemble instruction look at page 63
SWAGELESS THREAD TERMINALS - SMALL
High Polished Stainless Steel -AISI 316
NO. RIGHT WIRE G L1 L2 L3 KW KW1 kg/100
A800305 3 M5 63.0 40.0 3 8 8 0.0
A800406 4 M6 69.0 46.0 35 0 0 0.0
A800506 5 M6 73.0 47.0 35 2 0.0
A800608 6 M8 83.5 54.5 4 4 3 0.0
Breakload: 50% of x9 wire
L1
L3
L2
WIRE
KW1 KWG
Safe, reliable and machine free
swaging of wire, with the fastestswageless system on the market.
The threaded swageless terminal iseasy to use and ideal for site work
where a professional swaging would
normally be required. The swagelessthread terminal is Lloyds approved
and also available, on request, with
UNF thread!
Secure, reliable and machine freeswaging of wire, with the fastest
swageless system available.
The small threaded swageless termi-nal is easy to use and ideal for site
work where a professional swag-
ing tool would normally be required.The small swageless thread terminal
guarantees at least 50% break loadof the wire.
NEWS
Photo by Anthony May
C/Talgo. Parc.57-58,Polgono Industrial de Venta de Baos.C.P 34200 Venta de Baos (Palencia)Tel. 933.906.45 Fax. 933.906.45www.aciarium.com / [email protected]
-
8/2/2019 estructuras tensadas
15/52
4
INSIDE THREAD TERMINALS
High Polished Stainless Steel -AISI 316
NO. RIGHT NO. LEFT G WIRE L1 L2 L3 L4 D1 D2 A B.L. KG. KG/100 PACK
982504 992504 M4 2.5 64 32 5 25 5.50 5.50 2.8 500 0.8 BULK
980305 990305 M5 3 77 38 20 30 6.35 7.3 3.5 800 .3 BULK
980305L 990305L M5 3 92 38 35 45 6.35 7.3 3.5 800 .6 BULK
980406 990406 M6 4 84 45 20 30 7.50 8.00 4.4 250 .8 BULK
980406L 990406L M6 4 99 45 35 45 7.50 8.00 4.4 250 2. BULK
980506 990506 M6 5 90 5 20 30 9.00 9.00 5.3 250 2.8 BULK
980506L 990506L M6 5 05 5 35 45 9.00 9.00 5.3 250 3.2 BULK
980508 990508 M8 5 2 5 40 53 9.00 2.58 5.3 2350 5.4 BULK
980608 990608 M8 6 0 64 25 35 2.58 2.58 6.5 2350 7.2 BULK
980608L 990608L M8 6 26 64 40 50 2.58 2.58 6.5 2350 8.2 BULK
98060 99060 M0 6 27 64 40 53 2.58 6.00 6.5 3500 0.5 BULK
98080 99080 M0 8 40 83 40 50 6.00 6.00 8.4 3500 5.4 BULK
98082 99082 M2 8 47 83 40 53 6.00 8.00 8.4 500 6.7 BULK
9802 9902 M2 0 50 89 40 50 7.80 7.80 0.5 500 9.4 BULK
9806 9906 M6 0 52 89 40 53 7.80 22.00 0.5 8000 20.7 BULK
L1
L2L3
A
D1D2
L4
G
INSIDE THREAD -SMALL
Stainless Steel - AISI 316
NO. RIGHT NO. LEFT G WIRE DIM L1 L2 L3 L4 D1 D2 D3 KG/100
A40503 A50503 M5 3 /8" 65 25 20 35 7.3 5.5 3.5 .2
A40604 A50604 M6 4 5/32" 65 25 20 35 8.0 6.4 4.4 .7
A40605 A50605 M6 5 3/6" 70 30 20 30 8.0 7.5 5.3 2.6
A40806 A50806 M8 6 - 85 40 25 40 .0 9.0 6.5 6.3
Breakload: 50% of x9 wire
L1
L2 L3
L4
G
D2
D1
D3
Often found to be a good alternative
to a standard rigging screw are theinside thread terminals. The termi-
nals are available with left handedand right handed threads! For ease of
use when pressing or swageing onto
the wire, the terminals are markedwith wire size and swage depth.
The small inside thread terminals arefor lighter architectural xing of wires.
The terminals are available with left
handed and right handed threads
,with dimensions reduced to a mini-mum. These terminals are suitable
for hand crimping with Arctool &Arctool4, see page 60.
C/Talgo. Parc.57-58,Polgono Industrial de Venta de Baos.C.P 34200 Venta de Baos (Palencia)Tel. 933.906.45 Fax. 933.906.45www.aciarium.com / [email protected]
-
8/2/2019 estructuras tensadas
16/52
5
D1
D2
L4
L3
WIRE SIZE
L1
L2
G
L5
SWIVEL TERMINAL
Stainless Steel - AISI 316
ART. NO WIRE G L1 L2 L3 D KW KG/100
A900305 3 M5 8 30 30 5.5 4.5 .4
A900406 4 M6 88 3 35 6.4 5 .9
A900506 5 M6 00 37 35 7.5 6 2.8
A900608 6 M8 9 48 40 9.0 7 5.0
Breakload: 50% of x9 wire
L1
L3L2
GKW
D
Free Rotation
The Swivel Terminal is a free rotat-ing terminal with dimensions reduced
to a minimum.It is used in a situation
which does now allow for a riggingscrew e.g. for wall attachment or
similar xings. The swivel terminalallows the wire rope to turn in thesame direction as the terminal at the
other end . The terminal is suitablefor hand crimping with Arctool &
Arctool4, see page 60.
The easy attached dual/inside thread,is a part of the fastest swageless wire
system available.
The swageless terminal is easy touse and ideal for site work where a
professional swaging tool would nor-
mally be required. The inside thread-ed swageless terminal guarantees at
least 85% break load on the wire.
SWAGELESS DUAL/INSIDE THREAD TERMINAL
High Polished Stainless SteelART. NO. WIRE G D1 D2 L1 L2 L3 L4 L5 B.L. KG. KG/100
83220306 3 M6 22 6 39 8 70 60 5 700 4,4
83220406 4 M6 22 6 46 8 70 60 5 700 5,4
Note: All breakloads are determined by wedges (jaws) and thread
Assemble instruction look at page 63
NEWS
C/Talgo. Parc.57-58,Polgono Industrial de Venta de Baos.C.P 34200 Venta de Baos (Palencia)Tel. 933.906.45 Fax. 933.906.45www.aciarium.com / [email protected]
-
8/2/2019 estructuras tensadas
17/52
6
L1
L2
G
A
D
L3
RIGGING SCREWS FORK-FORK
High Polished Stainless Steel -AISI 316
ART. NO. G L1 L2 L3 A D B.L. KG. KG/100 PACK
20004 M4 56 06 9.5 6.5 4.0 500 3.3 0
20005 M5 80 26 2.0 7.5 5.0 800 5. 0
20006 M6 200 38 2.0 7.5 5.0 250 9.0 0
20006X M6 202 40 3.0 9.5 6.0 250 4.0 0
20008 M8 234 58 3.0 9.5 6.0 300 4.0 0
20008X M8 240 66 5.0 .0 8.0 2350 5.0 0
2000 M0 272 88 5.0 .0 8.0 2350 24.0 0
2000X M0 280 96 9.0 2.0 9.5 3500 26.0 0
2002 M2 350 244 25.0 4.0 2 500 52.5 5
2004 M4 387 267 25.0 4.0 2 5900 63.5 52006 M6 446 33 33.0 8.0 4 8000 00.0 5
2006L M6 442 309 3.0 22.0 4 8000 00.0 5
20020 M20 550 390 50.5 24.0 9 3000 97.0 BULK
20020L M20 546 386 50.5 30.0 9 3000 97.0 BULK
! 20022 M22 653 472 57.5 30.0 22 7000 448.0 BULK
! 20024 M24 769 536 62.5 30.0 25 20000 638.0 BULK
Note: All breakloads are determined by clevis pin and thread
! Bodie with bronze inserts
The stainless steel rigging
screws have been setting
standards over the last 50
years.
Available with a wide range
of end ttings, the most com-
mon ones are listed in this
catalogue, you can put to-
gether your own choice of
complete rigging screw, asthe loose threaded rigging
screw parts are all to be
found in the catalogue.
Rigging screws all featurethread and/or wire size, as
well as easy use marking
for left and right threaded
side.
A special Teon lubricate
is used on the threads im-proving the performance .
Whenever stainless steel
threaded parts are screwedtogether it is always strongly
recommended to lubricatethe threads rst, as this pre-vents the threads from jam-
ming!
The larger size rigging
screws - from M20 and upare available with chrome
bronze threaded inserts for
smooth adjustment .
Most rigging screws are also
available with open body &UNF thread, on request .
C/Talgo. Parc.57-58,Polgono Industrial de Venta de Baos.C.P 34200 Venta de Baos (Palencia)Tel. 933.906.45 Fax. 933.906.45www.aciarium.com / [email protected]
-
8/2/2019 estructuras tensadas
18/52
7
RIGGING SCREWS FORK-FORK - SMALL
High Polished Stainless Steel -AISI 316L
ART. NO. G L1 L2 L3 D A KG/100
A220505 M5 43 06 2.0 5.0 7.5 3.7
A220506 M6 55 2.0 5.0 7.5 5.7
A220606 M6 59 5 3.0 6.0 9.5 6.7
A220808 M8 86 40 5.0 8.0 .0 .3
A2200 M0 204 57 5.0 8.0 .0 9.2
A2222 M2 228 80 9.5 9.5 2.5 32.
Breakload: 50% of x9 wire
L1
L2
G
A
D
L3
RIGGING SCREWS MACHINED FORK-FORK
High Polished Stainless Steel -AISI 316
ART. NO. G L1 L2 L3 A D B.L. KG. KG/100 PACK
740020 M20 69 453 45 20 9 3000 330 BULK
740022 M22 637 456 49 22 22 7000 892 BULK
740024 M24 763 530 52 25 25 20000 93 BULK
740027 M27 83 578 55 30 28 25500 803 BULK
740030 M30 98 656 67 35 32 3000 264 BULK
740036 M36 970 696 67 35 35 43000 3390 BULK
Note: All breakloads are determined by clevis pin and thread
L1
L2
G
AD
L3
C/Talgo. Parc.57-58,Polgono Industrial de Venta de Baos.C.P 34200 Venta de Baos (Palencia)Tel. 933.906.45 Fax. 933.906.45www.aciarium.com / [email protected]
-
8/2/2019 estructuras tensadas
19/52
8
L1
L2
G
AD
D1
RIGGINS SCREWS FORK-TERMINAL
High Polished Stainless Steel -AISI 316
ART. NO. G WIRE L1 L2 L3 A D D1 B.L. KG. KG/100 PACK
20204 M4 2,0 88 36 9,5 6,5 4 5,5 500 3,3 0
20205 M5 2,0 206 52 2,0 7,5 5 5,5 800 4,5 0
22505 M5 2,5 206 52 2,0 7,5 5 5,5 800 4,6 0
20306 M6 3,0 232 70 2,0 7,5 5 6,4 250 8,5 0
20406 M6 4,0 242 80 2,0 7,5 5 7,5 250 8,7 0
20408 M8 4,0 275 99 3,0 9,5 6 7,5 300 3,0 0
20508 M8 5,0 28 205 3,0 9,5 6 9,0 300 3,2 0
2050 M0 5,0 32 228 5,0 ,0 8 9,0 2350 22,5 0
2060 M0 6,0 327 243 5,0 ,0 8 2,6 2350 25,6 0
2062 M2 6,0 393 287 25,0 4,0 2 2,6 500 47,5 5
2072 M2 7,0 40 295 25,0 4,0 2 4,2 500 50,0 5
2082 M2 8,0 46 30 25,0 4,0 2 6,0 500 53,5 5
2074 M4 7,0 439 39 25,0 4,0 2 4,2 5900 58,0 5
2084 M4 8,0 453 333 25,0 4,0 2 6,0 5900 63,5 5
2086 M6 8,0 499 366 33,0 8,0 4 6,0 8000 89,5 5
2086L M6 8,0 497 364 33,0 22,0 4 6,0 8000 89,5 5
206 M6 0,0 506 373 33,0 8,0 4 7,8 8000 93,0 5
206L M6 0,0 504 37 33,0 22,0 4 7,8 8000 93,0 5
2020 M20 0,0 587 427 50,5 24,0 9 7,8 3000 70, BULK
2220 M20 2,0 606 446 50,5 24,0 9 20,0 3000 70, BULK
! 2422 M22 4,0 736 555 57,5 30,0 22 25,0 7000 452,0 BULK
! 2424 M24 4,0 846 63 62,5 30,0 25,4 25,0 20000 642,0 BULK
! 2624 M24 6,0 874 64 62,5 30,0 25,4 28,0 20000 662,0 BULK
Note: All breakloads are determined by clevis pin and thread
! Bodie with bronze inserts
C/Talgo. Parc.57-58,Polgono Industrial de Venta de Baos.C.P 34200 Venta de Baos (Palencia)Tel. 933.906.45 Fax. 933.906.45www.aciarium.com / [email protected]
-
8/2/2019 estructuras tensadas
20/52
9
RIGGING SCREWS FORK-TERMINAL - SMALL
High Polished Stainless Steel -AISI 316L
ART. NO. G WIRE DIM L1 L2 L3 L4 D1 D2 D3 A KG/100
A20305 M5 3.0 /8" 53 7 2.0 25 5.0 5.5 3.5 7.5 3.
A20406 M6 4.0 5/32" 66 22 2.0 25 5.0 6.4 4.4 7.5 4.9
A20506 M6 5.0 3/6" 76 32 3.0 30 6.0 7.5 5.3 9.5 5.9
A20608 M8 6.0 - 209 63 5.0 40 8.0 9.0 6.5 .0 0.4
A2080 M0 8.0 5/6" 235 87 5.0 50 8.0 2.6 8.4 .0 8.7
A202 M2 0.0 - 264 26 9.5 60 9.5 6.0 0.5 2.5 3.8
Breakload: 50% of x9 wire
L1
L2
G
AD
D1
RIGGING SCREWS MACHINED FORK-TERMINAL
High Polished Stainless Steel -AISI 316
ART. NO. G WIRE L1 L2 A D B.L. KG. KG/100 PACK
74220 M20 2 646 492 20 9 3000 240 BULK
74422 M22 4 720 540 22 22 7000 649 BULK
74622 M22 6 745 565 22 22 7000 670 BULK
74624 M24 6 863 630 25 25 20000 876 BULK
74927 M27 9 963 728 30 28 25500 332 BULK
742230 M30 22 082 820 35 32 3000 888 BULK
742636 M36 26 86 92 35 35 43000 2484 BULK
L1
L2
G
A D
Suited for crimping with Arctool. Page 60
C/Talgo. Parc.57-58,Polgono Industrial de Venta de Baos.C.P 34200 Venta de Baos (Palencia)Tel. 933.906.45 Fax. 933.906.45www.aciarium.com / [email protected]
-
8/2/2019 estructuras tensadas
21/52
20
RIGGING SCREWS EYE-FORK
High Polished Stainless Steel -AISI 316
ART. NO. G L1 L2 L3 D1 D2 D3 A1 A2 B.L. KG. KG/100 PACK
9204 M4 56 04 9.5 4.0 4.5 0.0 6.5 3.0 500 2.8 BULK
9205 M5 88 29 2.0 5.0 5.5 2.0 7.5 3.0 800 4.2 BULK
9206 M6 206 38 2.0 5.0 6.5 4.0 7.5 4.0 300 6.3 BULK
9208 M8 244 64 3.0 6.0 8.5 7.0 9.5 5.0 2350 3.0 BULK
920 M0 27 88 5.0 8.0 0.5 2.0 .0 6.0 3500 2.9 BULK
922 M2 343 235 25.0 2.0 3.0 25.0 4.5 8.0 500 44.0 BULK
924 M4 38 262 25.0 2.0 3.0 28.0 4.5 9.0 5900 60.0 BULK
926 M6 426 296 33.0 4.0 4.5 3.0 8.0 0.0 8000 85.6 BULK
9220 M20 58 364 50.0 9.0 9.5 40.0 24.0 5.0 3000 69.3 BULK
! 9222 M22 625 444 57.0 22.0 23.0 47.0 30.0 8.0 7000 398.5 BULK
! 9224 M24 74 508 62.0 25.4 26.0 53.0 30.0 20.0 20000 580.0 BULK
Note: All breakloads are determined by Clevis Pin (D), eye ( D2) & thread
! Bodie with bronze inserts
D2G
D1
A1D3
L3
L1
L2
A2
Inducable, Spain
C/Talgo. Parc.57-58,Polgono Industrial de Venta de Baos.C.P 34200 Venta de Baos (Palencia)Tel. 933.906.45 Fax. 933.906.45www.aciarium.com / [email protected]
-
8/2/2019 estructuras tensadas
22/52
2
RIGGINS SCREWS EYE-EYE
High Polished Stainless Steel -AISI 316
CAT. NO. G L1 L2 D1 D2 A B.L. KG. KG/100 PACK
9904 M4 58 06 4,5 0,0 3,0 500 3 0,0
9905 M5 90 3 5,5 2,0 3,0 800 4 0,0
9906 M6 204 36 6,5 4,0 4,0 300 0,0
9908 M8 244 64 8,5 7,0 5,0 2350 4 5,0
990 M0 270 87 0,5 22,0 6,0 3500 23 5,0
992 M2 334 226 3,0 25,0 8,0 500 38 5,0
994 M4 376 257 3,0 28,0 9,0 5900 5 BULK
996 M6 408 278 4,5 3,0 0,0 8000 73 BULK
9920 M20 488 334 9,5 40,0 5,0 3000 05 BULK
! 9922 M22 597 46 23,0 47,0 8,0 7000 354 BULK
! 9924 M24 73 480 26,0 53,0 20,0 20000 670 BULK
! 9927 M27 759 527 28,5 65,0 25,0 27000 70 BULK
! 9930 M30 86 58 33,0 70,0 30,0 3000 99 BULK
! 9936 M36 892 68 36,0 80,0 30,0 43000 288 BULK
Note: All breakloads are determined by eye (D) & thread
! Bodie with bronze inserts
L1
L2
G
D1D2
A
C/Talgo. Parc.57-58,Polgono Industrial de Venta de Baos.C.P 34200 Venta de Baos (Palencia)Tel. 933.906.45 Fax. 933.906.45www.aciarium.com / [email protected]
-
8/2/2019 estructuras tensadas
23/52
22
RIGGINS SCREWS EYE-TERMINAL
High Polished Stainless Steel -AISI 316
CAT. NO. WIRE G L1 L2 D1 D2 A B.L. KG. KG/100 PACK
90204 2 M4 88 36 2.2 4.3 5.5 500 3 BULK
90205 2 M5 23 5 2.2 5.5 5.5 800 3.7 BULK
92505 2.5 M5 23 5 2.8 5.5 5.5 800 3.4 BULK
90306 3 M6 234 66 3.5 6.5 6.4 300 6.3 BULK
90406 4 M6 244 76 4.4 6.5 7.5 300 6.7 BULK
90408 4 M8 282 202 4.4 8.5 7.5 2350 2.4 BULK
90508 5 M8 288 208 5.3 8.5 9.0 2350 3.4 BULK
9050 5 M0 3 227 5.3 0.5 9.0 3500 9.5 BULK
9060 6 M0 326 242 6.5 0.5 2.6 3500 23.4 BULK
9062 6 M2 379 27 6.5 3.0 2.6 5400 38.5 BULK
9072 7 M2 387 279 7.5 3.0 4.2 5400 40.8 BULK
9082 8 M2 400 292 8.4 3.0 6.0 5400 5. BULK
9074 7 M4 432 34 7.5 3.0 4.2 5600 46.7 BULK
9084 8 M4 446 328 8.4 3.0 6.0 5600 55. BULK
9086 8 M6 478 350 8.4 4.5 6.0 7600 74.6 BULK
906 0 M6 495 367 0.5 4.5 7.8 7600 86.6 BULK
9020 0 M20 593 405 0.5 9.3 7.8 3000 26.9 BULK
92T20 2 M20 573 49 2.5 9.5 20.0 3000 36.9 BULK
92T20X 2 M20 599 435 2.5 9.5 2.4 3000 52.8 BULK
! 9422X 4 M22 708 527 4.8 23.0 25.0 7000 63.8 BULK
! 9624X 6 M24 846 63 7.0 26.0 28.0 20000 233.6 BULK
! 9927X 9 M27 934 702 20.0 29.0 34.5 27000 394.0 BULK
! 92230X 22 M30 057 777 23.5 33.0 40.5 3000 090.4 BULK
! 92636X 26 M36 50 873 27.5 36.0 46.0 43000 446.8 BULKNote: All breakloads are determined by eye (D2) & thread
! Bodie with bronze inserts
Nautical Steel, South Africa
C/Talgo. Parc.57-58,Polgono Industrial de Venta de Baos.C.P 34200 Venta de Baos (Palencia)Tel. 933.906.45 Fax. 933.906.45www.aciarium.com / [email protected]
-
8/2/2019 estructuras tensadas
24/52
23
RIGGING SCREWS TOGGLE-TERMINAL
High Polished Stainless Steel -AISI 316
ART. NO. G WIRE L1 L2 L3 L4 L5 D1 D2 B.L. KG. PACK
320306 M6 3 27 20 6.0 8.0 8.0 6.4 6.4 250 BULK
320408 M8 4 30 240 20.0 9.0 0.0 8.0 7.5 2350 BULK
32050 M0 5 36 278 24.0 2.0 2.0 9.5 9.0 3500 BULK
32062X M2 6 448 340 3.0 8.0 8.0 2.7 2.6 500 BULK
32072X M2 7 456 348 3.0 8.0 8.0 2.7 4.2 500 BULK
32082X M2 8 47 363 3.0 8.0 8.0 2.7 6.0 500 BULK
32086X M6 8 566 436 37.0 20.0 20.0 6.0 6.0 8000 BULK
32020X M20 0 642 488 40.0 25.0 24.0 9.0 7.8 3000 BULK
32220X M20 2 66 507 40.0 25.0 24.0 9.0 20.0 3000 BULK
32220XX M20 2 677 523 40.0 25.0 24.0 9.0 2.4 3000 BULK
! 32422X M22 4 808 627 46.0 30.0 26.0 22.0 25.0 7000 BULK
!32624X M24 6 963 730 53.0 37.0 29.0 25.4 28.0 23000 BULK
! 32927X M27 9 07 836 60.0 34.0 34.0 28.0 34.5 25500 BULK
! 322230X M30 22 93 93 70.0 4.5 40.0 32.0 40.5 3000 BULK
! 322636X M36 26 39 045 80.0 4.0 44.0 36.0 46.0 43000 BULK
Note: All breakloads are determined by Clevis Pin (D) & thread
! Bodie with bronze inserts
C/Talgo. Parc.57-58,Polgono Industrial de Venta de Baos.C.P 34200 Venta de Baos (Palencia)Tel. 933.906.45 Fax. 933.906.45www.aciarium.com / [email protected]
-
8/2/2019 estructuras tensadas
25/52
24
RIGGINS SCREWS TERMINAL-TERMINAL
High Polished Stainless Steel -AISI 316
ART. NO. G WIRE L1 L2 D1 D2 B.L. KG. KG/100 PACK
20205T M5 2.0 239 78 5.5 2.2 800 4 BULK
22505T M5 2.5 239 78 5.5 2.8 800 4 BULK
20306T M6 3.0 274 204 6.4 3.5 250 6 BULK
20406T M6 4.0 284 24 7.5 4.4 250 8 BULK
20408T M8 4.0 32 242 7.5 4.4 2350 3 BULK
20508T M8 5.0 328 258 9.0 5.3 2350 5 BULK
2050T M0 5.0 350 267 9.0 5.3 3500 2 BULK
2060T M0 6.0 380 297 2.6 6.5 3500 2 BULK
2062T M2 6.0 40 327 2.6 6.5 500 42 BULK
2072T M2 7.0 454 346 4.2 7.5 500 47 BULK
2074T M4 7.0 488 369 4.2 7.5 5900 57 BULK
2082T M2 8.0 490 382 6.0 8.4 500 55 BULK2084T M4 8.0 52 402 6.0 8.4 5900 65 BULK
2086T M6 8.0 548 48 6.0 8.4 8000 83 BULK
206T M6 0.0 566 436 7.8 0.5 8000 87 BULK
2020T M20 0.0 620 466 7.8 0.5 3000 35 BULK
2220T M20 2.0 658 504 20.0 2.5 3000 49 BULK
2220XT M20 2.0 658 504 2.4 2.5 3000 49 BULK
! 2422T M22 4.0 820 639 25.0 4.8 7000 378 BULK
! 2622T M22 6.0 870 689 28.0 7.0 7000 46 BULK
! 2624T M24 6.0 979 746 28.0 7.0 20000 553 BULK
! 2927T M27 9.0 4 879 34.8 20.0 27000 80 BULK
! 22230T M30 22.0 245 983 40.5 23.5 3000 79 BULK
! 22636T M36 26.0 402 28 46.0 27.5 43000 589 BULKNote: All breakloads are determined by thread
! Bodie with bronze insertsL1
L2
G
D1D2
Project, Spain
C/Talgo. Parc.57-58,Polgono Industrial de Venta de Baos.C.P 34200 Venta de Baos (Palencia)Tel. 933.906.45 Fax. 933.906.45www.aciarium.com / [email protected]
-
8/2/2019 estructuras tensadas
26/52
-
8/2/2019 estructuras tensadas
27/52
26
INSIDE THREAD FORK WELDED -SMALL
Stainless Steel - AISI 316
NO. RIGHT NO. LEFT WIRE G L1 L2 L3 D1 D2 A KG/100
A340503 A350503 3.0 M5 59 25.0 2.0 5.0 7. 7.5 .4
A340504 A350504 4.0 M6 67 30.0 2.0 5.0 8.0 7.5 .9
A340605 A350605 5.0 M6 68 30.0 3.0 6.0 8.0 9.5 2.2
A340806 A350806 6.0 M8 79 35.0 5.0 8.0 .0 4.5
Breakload: 50% of x9 wire
D2
L1
G
D1L2
A
L3
For small architectural wires anothergood alternative to rigging screw ad-
justment, is the inside thread forks!The forks have a light design, asdimensions are reduced to a mini-
mum - the forks are available with left
handed and right handed threads aswell as in a welded, and machined
version.
The machined adjuster forks are well suited when larger
wires are installed with inside thread forks. For furtherdetails see page 55
INSIDE THREAD FORK - MACHINED -SMALL
Stainless Steel - AISI 316
NO. RIGHT NO. LEFT G L1 L2 L3 L4 D1 D2 D3 A KG/100
A370503 A380503 M5 34 24 27 6,0 5 8 5,5 ,4
A370604 A380604 M6 44 30 35 8,5 5 3 8 6,5 ,9
A370806 A380806 M8 52 35 40 ,0 6 6 8,5 2,2
Breakload: 50% of x9 wire
D3 D2
L1
G
A
D1
L2 L4
(L3)
C/Talgo. Parc.57-58,Polgono Industrial de Venta de Baos.C.P 34200 Venta de Baos (Palencia)Tel. 933.906.45 Fax. 933.906.45www.aciarium.com / [email protected]
-
8/2/2019 estructuras tensadas
28/52
27
INSIDE THREAD DOMEHEAD
Stainless Steel -AISI 316
ART. NO. L1 L2 L3 G A1 A2 KG/100
A70503 43 40.0 25.0 M5 7.3 0.0 0.5
A70604 49 45.0 30.0 M6 8.00 .5 0.7
A70806 60 55.0 35.0 M8 .00 4.0 .0
G
L3
A2
A1
L2
L1
SLEEVE FOR WDS BALL
Stainless Steel - AISI 316
ART. NO. WIRE DIM. D1 D2 D3 L1 L2 KG/100
A292008 3,0 + 4,0 + 5,0 27,0 20,0 23,0 0,0 2,0 ,05
A29250 6 32,0 25,0 28,0 3,0 3,0 ,80
D3D2D1
L1
L2
FLEXIBLE ANGLE HINGE
Stainless Steel - AISI 316
ART. NO. WIRE D1 D2 L1 G NV KG/100
A232005 3 8 20.0 32.0 M5 7 3.7
A232006 4,0 + 5,0 8 20.0 32.0 M6 7 3.4
A232508 6 25.0 36.0 M8 0 6.8
L1
GKW
D1
D2
The inside thread dome head is ,when combined with a threaded ter-
minal, an ideal end/adjustment tting
for balustrades with through goingholes. For 4 mm wire it can also be
combined with a ball for dome head
terminal, for diagonal or angle ten-sioning! The Dome head features an
Allen key hole and minimum overalldimensions.
The ball sleeve is easily mounted on
a balustrade. It has an inside radiuscovering most of the balls in the
catalogue.
The exible angle hinge offers an
elegant and 00% correct angle to all
diagonal tensioned wires from 3 - 6mm. To adjustment there is a right
handed thread inside the shaft.
C/Talgo. Parc.57-58,Polgono Industrial de Venta de Baos.C.P 34200 Venta de Baos (Palencia)Tel. 933.906.45 Fax. 933.906.45www.aciarium.com / [email protected]
-
8/2/2019 estructuras tensadas
29/52
28
BODIES
High Polished Stainless Steel -AISI 316
ART. NO. G L1 KW D1 B.L KG. KG/100
0204 M4 70,0 - 7 500 ,2
0205 M5 80,0 - 8 800 ,2
0206 M6 92,0 - 0 300 2,6
0208 M8 2,0 - 4 2350 6,0
020 M0 20,0 - 7 3500 9,4
022 M2 50,0 - 2 5400 6,0
024 M4 70,0 - 2 5900 8,4
026 M6 90,0 - 27 8000 27,2
0220 M20 220,0 - 34 3000 46,8
02320 M20 240,0 36 40 3000 58,202322 M22 270,0 4 40 7000 6,6
02324 M24 325,0 46 50 20000 32,6
02327 M27 345,0 50 55 25500 408,
02330 M30 375,0 55 60 3000 538,4
02336 M36 40,0 60 65 43000 602,8
Note: All breakloads are determined by thread
L1
KWD1
G
G
D1
L1
G
D1
L1
Rigging screws bodies feature thread
size, easy use marking for left and
right threaded side and adjustmenthole. From M20 upwards the bod-
ies are available with chrome bronzethreaded inserts and spanner at on
body,for smooth adjustment.
In order to match the small ttings the
small bodies have less adjustment,but also feature thread size and,
easy use marking for left and right
threaded side and adjustment hole.
BODIES - SMALL
Stainless Steel - AISI 316
ART. NO. G L1 D1 KG/100
A0205 M5 60 8 0,9
A0206 M6 65 0 ,7
A0208 M8 80 4 4,3
A020 M0 90 7 7,0
A022 M2 00 23 ,3
Breakload: 50% of x9 wire
C/Talgo. Parc.57-58,Polgono Industrial de Venta de Baos.C.P 34200 Venta de Baos (Palencia)Tel. 933.906.45 Fax. 933.906.45www.aciarium.com / [email protected]
-
8/2/2019 estructuras tensadas
30/52
29
L1
L2
L4
L3
AB
D1
G
THREAD EYES
High Polished Stainless Steel -AISI 316
NO. RIGHT NO. LEFT G D1 D2 L1 L2 B B.L. KG. KG/100 PACK
02904 03904 M4 4.3 0 50 35 3 500 0.5 25.0
02905 03905 M5 5.5 2 63 4 3 800 0.9 25.0
02906 03906 M6 6.5 4 65 47 4 250 .5 25.0
02908 03908 M8 8.5 7 78 57 5 2350 3. 25.0
0290 0390 M0 0.5 22 90 63 6 3500 5. 25.0
0292 0392 M2 3.0 25 0 80 8 500 0. 0.0
0294 0394 M4 3.0 28 24 90 9 5900 4. 0.0
0296 0396 M6 4.5 3 33 00 0 8000 20.4 0.0
02920 03920 M20 9.5 40 64 20 5 3000 40.6 5.0
02922X 03922X M22 23.0 46 96 40 8 7000 69.0 BULK
02924X 03924X M24 26.0 53 230 70 20 20000 05.0 BULK
02927X 03927X M27 28.5 65 247 80 25 25500 53.0 BULK
02930X 03930X M30 33.0 70 274 200 30 3000 204.0 BULK
02936X 03936X M36 36.0 80 295 220 30 43000 296.0 BULK
Note: All breakloads are determined by eye (D) and thread
G
B
D1
D2
L1
L2
THREAD EYES - SMALL
Stainless Steel - AISI 316
NO. RIGHT NO. LEFT G D1 L1 L2 L3 L4 A B KG/100
A440505 A450505 M5 5.3 4 30 6.0 2.5 9 0.6
A440506 A450506 M6 5.3 48 35 3 7.0 3.8 .2
A440606 A450606 M6 6.3 48 35 3 7.0 3.8 .2
A440608 A450608 M8 6.3 57 40 6 8.5 4.5 5 2.2
Breakload: 50% of x9 wire
Thread eyes are for use in riggingscrews, inside thread parts or other
similar terminations. Available with
left handed and right handed threads
- also UNF sizes on request.
Small thread eyes for use with the
small rigging screws body, insidethread parts or other terminations.
C/Talgo. Parc.57-58,Polgono Industrial de Venta de Baos.C.P 34200 Venta de Baos (Palencia)Tel. 933.906.45 Fax. 933.906.45www.aciarium.com / [email protected]
-
8/2/2019 estructuras tensadas
31/52
30
THREAD FORKS WELDED
High Polished Stainless Steel -AISI 316
NO. RIGHT NO. LEFT G A D L1 L2 L3 B.L. KG.
02204B 03204B M4 7 4 50.0 9.5 34.0 500
02205B 03205B M5 8 5 60.0 2.0 4.0 800
02206B 03206B M6 8 5 67.0 2.0 47.0 000
02206XB 03206XB M6 0 6 68.0 3.0 47.0 300
02208B 03208B M8 0 6 79.0 3.0 57.0 300
02208XB 03208XB M8 8 82.0 5.0 57.0 2350
0220B 0320B M0 8 90.0 5.0 63.0 2350
0220XB 0320XB M0 2 0 94 9.0 63.0 3500
0222B 0322B M2 4 2 9 25.0 80.0 500
0222XB 0322XB M2 8 4 29 33.0 80.0 5000224B 0324B M4 4 2 37 25.0 90.0 500
0226B 0326B M6 8 4 5 33.0 00.0 8000
02220B 03220B M20 24 9 9 50.5 20.0 3000
02222B 03222B M22 30 22 224 57.5 40.0 7000
02224B 03224B M24 30 25 258 62.5 70.0 20000
Note: All breakloads are determined by clevis pin and thread
L1L2
G
A
DL3
L2
L1
D1
G
A
L3
Welded forks with thread and pin forrigging screws, inside thread parts
or other terminations. Available with
left handed and right handed thread-also UNF sizes on request.
Small welded forks with thread and
pin for the small rigging screw bod-ies, inside thread parts or other ter-
minations. Available with left handed
and right handed threads, incl. lock-ing nut.
THREAD FORK WELDED - SMALL
Stainless Steel - AISI 316
NO. RIGHT NO. LEFT G L1 L2 L3 D1 A KG/100
A320503 A330503 M5 49 30 2 5 7.5 .4
A320604 A330604 M6 54 35 2 5 7.5 2.0
A320605 A330605 M6 56 35 3 6 9.5 2.5
A320806 A330806 M8 65 40 5 8 .0 3.5
A320808 A330808 M0 72 45 5 8.0 .0 6.4
A3200 A3300 M2 82 50 9 9.5 2.5 .0
Breakload: 50% of x9 wire
C/Talgo. Parc.57-58,Polgono Industrial de Venta de Baos.C.P 34200 Venta de Baos (Palencia)Tel. 933.906.45 Fax. 933.906.45www.aciarium.com / [email protected]
-
8/2/2019 estructuras tensadas
32/52
3
L1
L2
G
A
D
L3
THREAD FORKS MACHINED
High Polished Stainless Steel -AISI 316
NO. RIGHT NO. LEFT G L1 L2 L3 A D PIN B.L. KG. KG/100 PACK
027420B 037420B M20 29 45 25 20 9 3000 25 BULK
027422B 037422B M22 26 49 40 22 22 7000 300 BULK
027424B 037424B M24 255 52 70 25 25 20000 400 BULK
027427B 037427B M27 274 55 80 30 28 25500 640 BULK
027430B 037430B M30 36 67 200 35 32 3000 980 BULK
027436B 037436B M36 334 67 220 35 35 43000 300 BULK
Note: All breakloads are determined by clevis pin and thread
L2L1 D1
A
GD2
L3
THREAD FORK - MACHINED -SMALL
Stainless Steel - AISI 316
NO. RIGHT NO. LEFT G L1 L2 L3 D1 D2 A KG/100
A42205 A43205 M5 42,5 3,0 6,0 5,0 ,0 5,5 ,
A42206 A43206 M6 48,0 36,0 8,5 5,0 3,0 6,5 ,4
A42208 A43208 M8 6,0 42,0 ,0 6,0 6,0 8,5 ,9
Breakload: 50% of x9 wire
Larger machined forks with thread
and pin for rigging screws, inside
thread parts or other terminations.Available with left handed and right
handed threads - also UNF sizes on
request.
Small machined forks with threadand pin, for the small rigging screws,
inside thread parts or other termina-tions. Available with left handed and
right handed threads, incl. locking
nut.
C/Talgo. Parc.57-58,Polgono Industrial de Venta de Baos.C.P 34200 Venta de Baos (Palencia)Tel. 933.906.45 Fax. 933.906.45www.aciarium.com / [email protected]
-
8/2/2019 estructuras tensadas
33/52
32
L3L4
2 x D1
L1
L2G
THREADED WALL TOGGLE
High Polished Stainless Steel -AISI 316
NO. LEFT G L1 L2 L3 L4 D1 B.L. KG. kg/100
035406 M6 8 47 40 4 6,4 250 3,8
035808 M8 97 57 44 8 8,3 2350 6,9
Note: All breakloads are determined by thread
L1
D2
D1
G
A
L2
L3
THREADED TOGGLE
High Polished Stainless Steel -AISI 316
NO. RIGHT NO. LEFT G A D1 D2 L1 L2 L3 B.L. KG. KG/100
023206B 033206B M6 8 6.0 4 88 6.0 3 300 5.0
023208B 033208B M8 0 8.0 8 05 2.0 6 2350 8.3
02320B 03320B M0 2 9.5 22 28 26.3 22 3500 5.4
02322XB 03322XB M2 8 2.7 30 54 33.4 27 5400 30.5
02324B 03324B M4 8 2.7 30 72 34.6 28 5400 33.3
02326XB 03326XB M6 20 6.0 35 99 37.0 29 8000 63.0
023220XB 033220XB M20 24 9.0 40 230 39.5 30 3000 .0
Use the threaded toggles to terminate
a rigging screw or other attachmentwhere exible angles are required or
there is a risk of failure due to side-
ways articulation fatigue e.g. with
outdoor canopies etc. Available withleft handed and right handed threads
- also UNF sizes on request.
Wall Toggle with left handed threadand pin, for rigging screws, insidethread parts or terminations to at
surfaces.
C/Talgo. Parc.57-58,Polgono Industrial de Venta de Baos.C.P 34200 Venta de Baos (Palencia)Tel. 933.906.45 Fax. 933.906.45www.aciarium.com / [email protected]
-
8/2/2019 estructuras tensadas
34/52
33
G
L
G
L
D1
DOMEHEAD SCREW
Stainless Steel - AISI 304ART. NO. G L D1 KG/100
A50530 M5 30 9.5 0.20
A50535 M6 35 0.5 0.85
A50540 M8 40 4.0 .90
THREAD PIN
Stainless Steel - AISI 316
ART. NO. L G KG/100
A400503 38 M5
A400604 45 M6
A400806 52 M8 2
Threaded domehead screws can be
used for end termination and adjust-ment of a wire e.g. combined with
inside thread terminals. The ball fordomehead is particularly useful for
angled installations.
The threaded pins are a useful wayto solve a problem where the wire
may need to be lengthened con-
nect it to an inside thread wall anchorand use an inside thread terminal or
rigging screw body for tensioning.
Ball for domehead screw page 47
C/Talgo. Parc.57-58,Polgono Industrial de Venta de Baos.C.P 34200 Venta de Baos (Palencia)Tel. 933.906.45 Fax. 933.906.45www.aciarium.com / [email protected]
-
8/2/2019 estructuras tensadas
35/52
34
L2L1
L
G
L
L1 L1
G
NV
DOUBLE THREAD PIN - SMALL
Stainless Steel - AISI 316ART. NO. L L1 NV G KG/100
A392405 60 24 3 M5 0.7
A392706 66 27 4 M6 .2
A393008 75 30 6 M8 2.3
DOUBLE THREADED PIN
High Polished Stainless Steel -AISI 316
ART. NO. L L1 NV G KG/100 PACK
900305HV 70 30 3 M5 .0 BULK
900406HV 06 48 4.5 M6 .9 BULK
900408HV 29 57 6 M8 4. BULK
90060HV 45 63 7 M0 7. BULK
90072HV 80 80 9 M2 3.0 BULK
90084HV 98 89 M4 9.6 BULK
DUAL THREAD SCREW
Stainless Steel - AISI 304
NO. RIGHT NO. LEFT L L1 L2 G KG/100
A40503 A420503 70 30 24 5 M5 0.8
A40604 A420604 80 35 40 6 M6 .3
A463560 A4263560 00 35 60 6 M6 .7
A40806 A420806 90 40 40 8 M8 2.6
The opposite rigging screw would be
a combination of the double threaded
pin and inside threaded terminalslocked at either side. This is usually
used where extra adjustment lengthsare needed or when pre-tted wires
are manufactured too short !
The dual thread pin allows direct in-stallation into wood and if combined
with the correct raw plug it is attach-
able to almost any wall. Ideal for in-side thread solutions.
Dual thread screw tong. Page 6
C/Talgo. Parc.57-58,Polgono Industrial de Venta de Baos.C.P 34200 Venta de Baos (Palencia)Tel. 933.906.45 Fax. 933.906.45www.aciarium.com / [email protected]
-
8/2/2019 estructuras tensadas
36/52
35
B1
B2
L1
L2
L3
G
D
L4
EYE BOLTS WELDED
High Polished Stainless Steel -AISI 304
ART. NO. G L1 L2 L3 B1 B2 D L4 B.L.KG. KG/100 PACK
370630 M6 57 46 30 25 5,0 3 30 300 ,8 0
370640 M6 66 56 40 25 5,0 3 40 300 2,8 0
370650 M6 76 62 50 25 5,0 3 50 300 3,0 0
370660 M6 87 76 60 25 5,0 3 60 300 2,6 0
370600 M6 26 5 00 25 5,0 3 95 300 3,7 0
370835 M8 66 53 35 25 6,0 5 35 2400 3,8 0
370850 M8 80 68 50 25 6,0 5 50 2400 4,9 0
370880 M8 0 98 80 25 6,0 5 75 2400 5,5 0
370800 M8 30 8 00 25 6,0 5 75 2400 6,5 0
37050 M0 85 70 50 30 7,0 6 50 3500 8,7 0
37000 M0 35 20 00 30 7,0 6 95 3500 ,0 0
37250 M2 90 74 50 30 6,0 8 45 4500 0,2 0
3720 M2 40 24 00 30 9,0 8 85 4500 5,0 0
3726 M2 200 84 60 30 9,0 8 85 4500 9,0 0
Note: All breakloads are determined by eye (D) and thread
B1
L3
G
D
L1
L2
B2
L4
EYE BOLTS FORGED
High Polished Stainless Steel -AISI 304
ART. NO. G L1 L2 L3 B1 B2 D L4 B.L. KG. KG/100 PACK
30630 M6 53 46 30 25.0 4.0 6.5 30 300 .3 0
30660 M6 83 76 60 25.0 4.0 6.5 60 300 2. 0
30835 M8 65 58 35 25.0 5.0 8.5 35 2400 3.3 0
30880 M8 0 04 80 25.0 5.0 8.5 75 2400 5.0 0
3050 M0 87 75 50 30.0 6.0 0.5 50 3500 8.2 0
3000 M0 37 25 00 30.0 6.0 0.5 85 3500 .0 0
Note: All breakloads are determined by eye (D) and thread
The Welded and forged eye boltsare supplied with a pre-welded cov-
er disc, washer and nut and offer a
strong attachment. Use them , for ex-ample, combined with forks welded
or machined..
C/Talgo. Parc.57-58,Polgono Industrial de Venta de Baos.C.P 34200 Venta de Baos (Palencia)Tel. 933.906.45 Fax. 933.906.45www.aciarium.com / [email protected]
-
8/2/2019 estructuras tensadas
37/52
36
EYE STRAPS
High Polished Stainless Steel -AISI 304
CAT. NO. D1 D2 A1 A2 L KG/100 PACK
5040 4.2 9 28 2.0 0.3 00.0
5502 5.0 34 5 4.0 0.5 00.0
55203 5.3 2 44 20 9.0 .0 00.0
55304 5.3 0 63 28 28.0 .2 50.0
56205 6.4 4 67 32 33.0 2.0 50.0
D1 D2
L
A2
A1
" U " BOLTS
High Polished Stainless Steel -AISI 316
ART. NO. G L1 L2 L3 L4 B D B.L. KG. KG/100 PACK
340435 M4 66 35 25 30 26 4.0 750 2. 25
340535 M5 67 35 25 30 25 4.4 900 2.6 25
340635 M6 67 35 26 30 27 5.3 250 4.5 5
340650 M6 84 50 26 30 27 5.3 250 5.7 5
340835 M8 7 35 26 30 25 7. 750 7.2 5
340850 M8 86 50 26 30 25 7. 750 9.7 5
340880 M8 6 80 26 45 25 7. 750 .8 5
348840 M8 80 40 30 32 42 8.0 750 2.4 5
348850 M8 90 50 30 32 42 8.0 750 3.2 5
34045 M0 95 45 40 40 30 0.0 3500 8.4 5
34060 M0 0 60 40 35 30 0.0 3500 20.4 5
3400 M0 50 00 40 85 30 0.0 3500 25.0 5
34280 M2 22 80 30 85 35 0.8 500 29.0 5
Note: All breakloads are determined by thread
L1
L2
G
DL3
B
L4
Traditional marine U-bolts may be
used where an eyebolt would be toosmall or extra strength is needed.
The U-bolts are supplied with two
backing plates and nuts.
Eye straps are used for various at-
tachments and xing points . Place
it over two pre-drilled holes and ifpossible use a pop rivet for easy at-
tachment .
SECURITY "U" BOLTS
High Polished Stainless Steel -AISI 316 - Wst. 4542
ART. NO. G L1 L2 L3 L4 B B1 D B.L. KG. KG/100 PACK Nut
Class3 certifed
43265 M2 22 65 4 48 35 33 4.0 500 3.0 50 Nm
Class2 certifed
43045 M0 95 45 38 40 30 28 2.0 3500 22.0 50 Nm
Note: All breakloads are determined by thread
L3B1
B
G
L1
L2L4
D
C/Talgo. Parc.57-58,Polgono Industrial de Venta de Baos.C.P 34200 Venta de Baos (Palencia)Tel. 933.906.45 Fax. 933.906.45www.aciarium.com / [email protected]
-
8/2/2019 estructuras tensadas
38/52
37
STOP NUT
High Polished Stainless Steel -AISI 316
NO. RIGHTNO. LEFT G NV H KG/100 PACK PCS
04204 05204 M4 7 3 0.0 BULK
04205 05205 M5 8 4 0.0 BULK
04206 05206 M6 8 4 0.0 BULK
04208 05208 M8 0 5 0.5 BULK
0420 0520 M0 3 7 0.25 BULK
0422 0522 M2 7 8 0.70 BULK
0424 0524 M4 9 0 .30 BULK
0426 0526 M6 22 2.00 BULK
04220 05220 M20 24 3 2.25 BULK
04222 05222 M22 30 7 3.50 BULK
04224 05224 M24 36 8 8.80 BULK
04227 05227 M27 4 22 6.0 BULK04230 05230 M30 46 24 7.0 BULK
04236 05236 M36 55 29 39.0 BULK
KW
G
H
SECURITY NUT
High Polished Stainless Steel -AISI 316
ART. NO. G L D NV KG/100 BREAK PACK
044306 M6 7,0 2 2 0,6 20Nm BULK
044308 M8 8,5 5 6 ,0 40Nm BULK
04430 M0 9,0 7 7 ,3 50Nm BULK
04432 M2 0,5 20 22 2,3 50Nm BULK
L
D
KW
G
TOP NUT
Stainless Steel - AISI 304
ART.NO. NV G KG/100
A040503 8 M5 0.2
A040604 0 M6 0.4A040806 3 M8 0.9
NV
G
STOP END NUT
Stainless Steel - AISI 316
CAT.NO. D1 D2 L1 L2 G KG/100
A60503 8 2.0 33 30 M5 0.8
A60604 8 2.0 39 35 M6 0.9
A60806 0 4.0 45 40 M8 .2
A6008 3 7.0 50 45 M0 2.5
Breakload: 50% of x9 wire
D2
L1
L2
D1
G
Nuts may be used for locking e.g. a
rigging screw or they are very usefulto tighten a thread terminal to tension
a wire.
The security nut is the ideal solution
where the nut has to remain perma-
nently tightened. Once tightened, theKEY part breaks off and only a cone
is left.
The top nut locks and at the same
time covers up the thread end.
The stop end nut allows for a smallamount of adjustment and is a nice
end piece to the terminal tted wire.
C/Talgo. Parc.57-58,Polgono Industrial de Venta de Baos.C.P 34200 Venta de Baos (Palencia)Tel. 933.906.45 Fax. 933.906.45www.aciarium.com / [email protected]
-
8/2/2019 estructuras tensadas
39/52
-
8/2/2019 estructuras tensadas
40/52
39
BALL FOR DOME HEAD SCREW
Stainless Steel - AISI 303
ART. NO. G D D1 KG/100
A270503 M5 5.0 5.3 .2
A270604 M6 20.0 6.3 2.9
A270806 M8 25.0 8.5 5.7
A27008 M0 30.0 0.5 8.8
D
D1
BALL STOPPER
Stainless Steel - AISI 303
ART. NO. WIRE G D D1 KG/100
A260003 3 M4 5.0 3.5 .2
A260004 4 M5 20.0 4.5 3.0
A260005 5 M5 20.0 5.5 2.9
A260006 6 M6 25.0 6.5 5.7
G
D1
D
STOPPER
Stainless Steel - AISI 304-Inside jaws for better grip
ART. NO. WIRE G L L1 L2 B SLIP LOAD KG/100
A650003 3 M3 5 3 2.5 0 00kg .4A650004 4 M3 5 4 3.0 0 00kg .4
A650005 5 M3 20 5 4.0 0 00kg 2.
A650006 6 M3 20 6 5.0 0 00kg 2.
A650008 8 M4 23 8 7.0 2 50kg 2.6
L
L1
L2
B
G
The ball stopper slides over the wire
and attached with an Allen key screw
at the point where the stop is needed.It may alternatively also be used as a
base for connection to a smaller wire
- as seen in the picture.
Stoppers are used on both horizontal
and vertical wires . They come in twoparts for easy installation; have small
teeth inside and thus a better grip
when load is applied.
C/Talgo. Parc.57-58,Polgono Industrial de Venta de Baos.C.P 34200 Venta de Baos (Palencia)Tel. 933.906.45 Fax. 933.906.45www.aciarium.com / [email protected]
-
8/2/2019 estructuras tensadas
41/52
40
NET CLIPS
Stainless Steel - AISI 316
ART.NO WIRE G L L1 L2 L3 D1 KG/100
A600003C 3 M0 9 5 8 3,2 7 2,4
A600004C 4 M2 2 5 8 4,2 20 3,6
A600005C 5 M2 23 5 0 5,2 20 3,6
A600006C 6 M2 25 5 0 6,2 20 5,8
A600008O 8 M6 36 6 4 8,3 24 8,8
For Through - going thread please order
ART. NO. WIRE G L L1 L2 L3 D1 KG/100
A60003C 3 M0 9 5 8 3,2 7 2,4
A60004C 4 M2 2 5 8 4,2 20 3,6
A60005C 5 M2 23 5 0 5,2 20 3,6
A60006C 6 M2 25 5 0 6,2 20 5,6
A60008O 8 M6 36 6 4 8,3 24 8,5
L3
GD1
LL1
L2
FLEXIBLE NET CLIP
Stainless Steel - AISI 316
ART.NO. WIRE L1 L2 ROTATION KG/100
022404 4 20 8 360 Dg. 2.7
022406 6 24 0 360 Dg. 2.9
L2
L1
Net Clips are used where crossedwires need connection e.g. for wire
nets. They are supplied in two ver-sions - one with through-going
thread, and one without.
Flexible net clips were developed for
wire crossings at angles over or un-der 90 degree. It is xed to the wire
with small Allen keys and must be
installed on the wire before the endttings..
8 mm Version
8 mm Version
C/Talgo. Parc.57-58,Polgono Industrial de Venta de Baos.C.P 34200 Venta de Baos (Palencia)Tel. 933.906.45 Fax. 933.906.45www.aciarium.com / [email protected]
-
8/2/2019 estructuras tensadas
42/52
4
ANGLE HINGE FOR CONE TERMINALS
Stainless Steel - AISI 303
ART. NO. D1 D2 D3 L L1 KG/100
A32003 20 6 8,3 5,0 ,0 0,4
A32503 25 6 8,3 5,0 ,0 0,4
A33003 30 6 8,3 5,0 ,0 0,5
A33503 35 6 8,3 5,0 ,0 0,6
A34003 40 6 8,3 5,0 ,0 0,6
A32004 20 3 7 0,3 5,0 ,0 0,6
A32504 25 3 7 0,3 5,0 ,0 0,7
A33004 30 3 7 0 5,0 ,0 0,8
A33504 35 3 7 0 5,0 ,0 0,8
A34004 40 3 7 0 5,0 ,0 0,9
A32005 20 4 8 2 5,0 ,0 0,8
A32505 25 4 8 2 5,0 ,0 0,9
A33005 30 4 8 2 5,0 ,0 0,9
A33505 35 4 8 2 5,0 ,0 ,0
A34005 40 4 8 2 5,0 ,0 ,
A32006 20 7 0 5 5,0 ,0 ,2
A32506 25 7 0 5 5,0 ,0 ,2
A33006 30 7 0 5 5,0 ,0 ,3
A33506 35 7 0 5 5,0 ,0 ,5
A34006 40 7 0 5 5,0 ,0 ,6
Only on request
L
L1
D3
D2
D1
ANGLE HINGE
Stainless Steel - AISI 303ART. NO. D1 D2 L KG/100
A302003 20 ,0 5,0 5,0 0,4
A302503 25 ,0 5,0 5,0 0,4
A303003 30 ,0 5,0 5,0 0,5
A303503 35 ,0 5,0 5,0 0,6
A304003 40 ,0 5,0 5,0 0.6
A302004 20 3,0 6,0 5,0 0,6
A302504 25 3,0 6,0 5,0 0,7
A303004 30 3,0 6,0 5,0 0,8
A303504 35 3,0 6,0 5,0 0,8
A304004 40 3,0 6,0 5,0 0,9A302006 20 7,0 8,2 5,0 ,2
A302506 25 7,0 8,2 5,0 ,2
A303006 30 7,0 8,2 5,0 ,3
A303506 35 7,0 8,2 5,0 ,5
A304006 40 7,0 8,2 5,0 ,6
Only on request
L D1
D2
The angle hinges are used for stand-
ard threaded, or cone terminals andgive a nice nal attachment to diago-
nal wire installations or on, for exam-
ple, staircases.
C/Talgo. Parc.57-58,Polgono Industrial de Venta de Baos.C.P 34200 Venta de Baos (Palencia)Tel. 933.906.45 Fax. 933.906.45www.aciarium.com / [email protected]
-
8/2/2019 estructuras tensadas
43/52
42
COVER DISK
Stainless Steel - AISI 316
ART. NO. D1 D2 D3 KG/100
A500003 5 5.5 3.0 0.35
A500004 20 6.5 4.0 0.85
A500006 25 8.5 4.0 .30
D1 D3
D2
CLAMPS
Duplex -AISI 316
ART. NO. WIRE L1 L2 G KG/100
A570403 3 35 4 M4 .4
A570504 4 40 7 M5 2.45
A570505 5 50 2 M5 2.9
A570606 6 60 25 M6 5.00
CLAMPS
SIMPLEX-AISI 316
ART. NO. WIRE L1 L2 G KG/100
A560403 3 7 4 M4 0.72
A560504 4 20 7 M5 .27
A560505 5 25 2 M5 .46
A560606 6 30 25 M6 2.52
SCREW EYES
Stainless Steel - AISI 304
ART. NO. L1 L2 L3 A D KG/100
A433553 48 24 2 3.0 5 5.3 0.78
A434063 60 35 3 3.8 6 6.3 .32
L1
L2
L3
A
D
Duplex and Simplex clamps are usedfor making wire loops, with or without
thimbles, on site.
The nal touch to a installation may
be given by use of a cover disk. The
cover disk is heavy machined andhas a raised edge .
The screw eyes can be directly in-stalled in wood and if combined with
the correct raw plug can be attached
to almost any wall. Use it as a smalleyebolt for attachment to forks, tog-
gle forks, shackles etc.
C/Talgo. Parc.57-58,Polgono Industrial de Venta de Baos.C.P 34200 Venta de Baos (Palencia)Tel. 933.906.45 Fax. 933.906.45www.aciarium.com / [email protected]
-
8/2/2019 estructuras tensadas
44/52
43
CLEVIS PIN
High Polished Stainless Steel -AISI 316
ART. NO. L D KG/100 PACK
06304 3 4.0 0.2 BULK06605 5 5.0 0.3 BULK
06806 7 6.0 0.9 BULK
06663 6 6.4 0.9 BULK
06908 8 8.0 .0 BULK
062008 2 8.0 . BULK
062395 23 9.5 .5 BULK
0626 26 .0 2.4 BULK
06282 28 2.0 3.0 BULK
06302 30 2.0 3.5 BULK
06342 34 2.0 4.0 BULK
06324 32 4.0 5.3 BULK
06374 37 4.0 5.5 BULK06346 34 6.0 6.5 BULK
06406 40 6.0 7.7 BULK
06449 44 9.0 3.0 BULK
06499 49 9.0 4.0 BULK
064622 46 22.0 6.3 BULK
065522 55 22.0 9.0 BULK
065822 58 22.0 20.0 BULK
065525 55 25.4 25.0 BULK
066325 63 25.4 28.0 BULK
067328 73 28.0 40.0 BULK
068332 83 32.0 60.0 BULK
068835 88.5 35.0 76.0 BULK
CLEVIS PIN
High Polished Stainless Steel -AISI 316
ART. NO. L D KG/100 PACK
06304 3 4.0 0.2 BULK
06605 5 5.0 0.3 BULK
06806 7 6.0 0.9 BULK
06663 6 6.4 0.9 BULK
06908 8 8.0 .0 BULK
062008 2 8.0 . BULK
062395 23 9.5 .5 BULK0626 26 .0 2.4 BULK
06282 28 2.0 3.0 BULK
06302 30 2.0 3.5 BULK
06342 34 2.0 4.0 BULK
06324 32 4.0 5.3 BULK
06374 37 4.0 5.5 BULK
G-RING
High Polished Stainless Steel
ART.NO. DIM. D KG/100 PACK
07060 .00 .0 0.05 BULK070602 .25 5.0 0.075 BULK
070603 .50 9.0 0.00 BULK
070604 2.00 23.0 0.230 BULK
D
DIM
Pins and G-rings are spare parts forthe catalogue.
C/Talgo. Parc.57-58,Polgono Industrial de Venta de Baos.C.P 34200 Venta de Baos (Palencia)Tel. 933.906.45 Fax. 933.906.45www.aciarium.com / [email protected]
-
8/2/2019 estructuras tensadas
45/52
44
TOGGLES
High Polished Stainless Steel -AISI 316
ART. NO. A B D1 D2 L B.L. KG. KG/100 PACK
40506 7 5 5.5 5.0 25 300 .8 25
40608 8 6 6.5 6.0 27 800 3.0 0
4080 0 8 8.5 8.0 33 2600 5.5 0
40 2 9 0.0 9.5 37 3500 7.2 0
4 5 9 .5 .0 45 4800 2. 0
424 4 0 2.5 2.0 48 5800 4.5 0
466 2 4 4.5 4.0 62 7500 28.0 0
Note: All breakloads are determined by clevis pin
L
A D2 D1B
BA
D L
TOGGLES
High Polished Stainless Steel -AISI 316
ART. NO. L A B D B.L. KG. KG/100 PACK
40006 25.0 7.5 6.5 6.0 800 2.3 0
40008 30.0 8.5 7.5 8.0 2600 4.0 0
4000 40.0 0.5 9.5 9.5 4000 5.9 0
400 45.0 .5 0.5 .0 4800 8.5 0
4002 50.0 3.5 2.0 2.0 5800 2.4 0
4006 55.0 7.0 5.0 6.0 8000 22.5 0
4009 60.0 2.0 8.0 9.0 3000 40.7 0
Note: All breakloads are determined by clevis pin
For lengthening the wire, or addingexibility to installations, the toggles
can be applied. Where a structure is
subjected to stress the use of a tog-gle is essential as it can minimise the
fatigue risk.
Photo by Anthony May
C/Talgo. Parc.57-58,Polgono Industrial de Venta de Baos.C.P 34200 Venta de Baos (Palencia)Tel. 933.906.45 Fax. 933.906.45www.aciarium.com / [email protected]
-
8/2/2019 estructuras tensadas
46/52
45
SHACKLES
High Polished Stainless Steel -AISI 304
ART. NO. D A L B.L. KG. KG/100 PACK
5006 M6 4.0 23 2000 2.5 50
5008 M8 7.0 3 3000 4.5 50
5000 M0 2.0 40 4800 8.5 25
5002 M2 25.0 50 7000 6.0 25
Note: All breakloads are determined by pin and thread
SHACKLES
High Polished Stainless Steel -AISI 304
ART. NO. D A L B.L. KG. KG/100 PACK
6004 M4 0.0 5 500 0.5 00.0
60042 M4 .0 20 500 0.6 00.0
6005 M5 2.0 7 000 .0 00.0
60052 M5 6.0 24 000 .6 00.0
60053 M5 6.0 36 00 .8 00.0
6525 M5 3.5 25 00 .5 00.0
65206 M6 6.0 23 400 .6 50.0
Note: All breakloads are determined by pin and thread
L
D
A
L
D
A
SHACKLES
High Polished Stainless Steel -AISI 304
ART. NO. D A L B.L. KG. KG/100 PACK
566 M6 4 23 2000 2.7 50
56262 M6 4 40 2000 3. 50
588 M8 7 3 3000 4.8 50
58282 M8 8 42 3000 5.3 50
500 M0 2 40 4800 9.0 25
522 M2 25 50 7000 6.5 25
Note: All breakloads are determined by pin and thread
D
A
L
L
A
D
SHACKLESHigh Polished Stainless Steel -AISI 304
ART. NO. D A L B.L. KG. KG/100 PACK
5004 M4 0.0 5.0 500 0.5 00
50042 M4 .0 20.0 500 0.6 00
5005 M5 2.0 7.0 000 .0 00
50052 M5 6.0 24.0 000 .6 00
50053 M5 6.0 36.0 00 .8 00
5525 M5 3.5 25.0 00 .5 00
50054 M5 2.0 37.5 00 2. 50
55206 M6 6.0 23.0 400 .6 50
50062 M6 4.0 40.0 2000 2.9 50
50064 M6 26.0 46.0 800 5.5 50
50082 M8 8.0 42.0 3000 5.0 50
Note: All breakloads are determined by pin and thread
The high quality at shackles may be used as a exible on/off
attachment, or just as a method of lengthening an item.
C/Talgo. Parc.57-58,Polgono Industrial de Venta de Baos.C.P 34200 Venta de Baos (Palencia)Tel. 933.906.45 Fax. 933.906.45www.aciarium.com / [email protected]
-
8/2/2019 estructuras tensadas
47/52
46
S
A1
A2
L3
THIMBLES
High Polished Stainless Steel -AISI 316
ART. NO. A1 A2 L S KG/100 PACK
0002 3 9.0 7 0.2 00.0
0003 4 0.0 8 0.3 00.0
0004 5 .0 20 0.5 00.0
0005 6 3.0 2 0.7 00.0
0006 7 5.0 27 2 .2 00.0
0007 8 9.0 33 2 .5 00.0
0008 9 22.0 38 2 2.7 50.0
0009 0 24.0 4 2 3 50.0
000 27.0 48 3 5 BULK
002 4 29.0 53 3 6 BULK
004 6 32.0 57 3 BULK
006 8 40.0 67 3 2 BULK
008 20 45.0 75 4 22 BULK0020 22 50.0 80 4 32 BULK
0022 24 56.0 90 5 47 BULK
0026 28 70.0 2 6 80 BULK
0028 30 75.0 20 6 0 BULK
0032 34 95.0 52 6 56 BULK
0034 36 00.0 60 6 76 BULK
0036 38 0.0 76 6 92 BULK
0038 40 5.0 84 8 292 BULK
0040 42 20.0 92 8 320 BULK
0042 45 50.0 240 8 364 BULK
L
S
A1
A2
THIMBLES WELDED
High Polished Stainless Steel -AISI 316
ART. NO. A1 A2 L3 S KG/100 PACK
9909 0 24.0 24.0 6 2 3.2 BULK
990 27.0 27.0 8 3 5.9 BULK
992 4 29.0 29.0 8 3 6.3 BULK
994 6 32.0 32.0 0 3 2.3 BULK
996 8 40.0 40.0 0 3 3.6 BULK
998 20 45.0 45.0 2 4 24.0 BULK
9920 22 50.0 50.0 2 4 34.8 BULK
9922 24 56.0 56.0 6 5 5.8 BULK
9926 28 60.0 60.0 6 6 85.6 BULK
The reinforced thimble is based on the standard thimble but extra force is attained
by the addition of a welded bar, as well as the ends of the thimbles being weldedtogether.
The thimbles from Blue Wave are known worldwide for supreme quality and areoften the rst choice for the harsh environment of the marine sector.
C/Talgo. Parc.57-58,Polgono Industrial de Venta de Baos.C.P 34200 Venta de Baos (Palencia)Tel. 933.906.45 Fax. 933.906.45www.aciarium.com / [email protected]
-
8/2/2019 estructuras tensadas
48/52
47
CURTAIN ANCHORS
Stainless Steel - AISI 304
ART. NO. WIRE L1 L2 D1 D2 B.L. KG.
IX085 3 60 50 5,3 For M5 6.5 500
incl. Double headed Clevis Pins
ART. NO. WIRE L1 L D1 D2 B.L KG.
IV085 3 60 50 5,3 For M5 6.5 500
incl. Double headed Clevis Pins
ART. NO. WIRE L1 L2 D1 D2 B.L. KG.
IY305 3 60 50 5,3 For M5 6.5 500
incl. Double headed Clevis Pins
D1
L3
L2
L1D2
L3
D1
L1
L2
D2
The Y-system offers a numberof options - developed as a solid
curtain wire base the Y, V and X
anchors support loads up to 500
kg. and can be used with 2 , 2.5and 3 mm wire/ M5 thread.
The pin gives exibility to the
system and allows the wires tobe tted at various angles, but
can , on longer expansions, also
be used as a simple wire sup-port.
Use max. M5 thread terminals for 3 mm wire
C/Talgo. Parc.57-58,Polgono Industrial de Venta de Baos.C.P 34200 Venta de Baos (Palencia)Tel. 933.906.45 Fax. 933.906.45www.aciarium.com / [email protected]
-
8/2/2019 estructuras tensadas
49/52
48
GREENLINE POST
High Polished Stainless Steel -AISI 303
ART. NO. G1 G2 D1 D2 D3 L1 L2 L3 L4 LOAD KG/100 PACK
0864095 M8 M6 40.0 6.0 6.0 95 30 9 9 00kg 9.4
Plant type Plant Plant Location Lifetime Weight Care Separation between wire
height width Horizontal Vertical
(m) (m) (Years) (kg/m2) (cm) (cm)
1. Clematis 3-5 1,5 - 2,5 Sun / shadow 20-40 8 Specic 40 30-40
2. Vitis vinifera 5-6 3 Sun 25-00 4 Prune 40 40
3. Hydrangea anomala 0-5 4-6 Shadow/ half 50-00 5 Humid 60 30-60
4. Fallopia baldschuanica 12 3 Sun/half. 30 11 Specic 160 40
5. Wisteria sinensis 15 3 Sun/half 100 15 Specic 100-200 60-80
6. Lonicera 5 2 Shadow/ half 50 8 Prune. 80 40
7. Aristtolochia macrophylla 8-0 4 Shadow/ half 50-00 5 Humid 00 30-60
8. Celastrus orbiculata 12 3 Sun/half 50 15 Specic 100-150 60-80
9. Periploca graeca/sepium 6-10 2-3 Sun Specic 40 40
0. Pyracantha 3-5 2-3 Sun/Shadow. 30 0 Prune 40 30
11. Humulus scandens 8 2,5 Shadow/ half 10 9 Specic 100 -150 30 - 50
12. Rosa diverse 2-5 1-4 Sun 100 8 Specic 60 30-60
3. Rubus fructicosus 3 3 Sun/half 30-60 Prune 30-40 50
Plant diagram
To support the growth of individual plants it is necessary to take account of the way the plants grows in connection with the installation. Some plants grow
primarily in height and others in width. The plant diagram here shows a small selection and may provide inspiration in planning your trellis.
Green Line is a wire trellis system with a long lifetime,
which requires no maintenance after installation.
Green Line trellis is not only a decorative addition to any
facade. It protects the facade against damp and dirt and in
addition has a noise-reducing and insulating effect.
All the system requires is rm anchoring in the brickwork.
In most cases it can be installed with the help of standardproducts from a DIY market.
C/Talgo. Parc.57-58,Polgono Industrial de Venta de Baos.C.P 34200 Venta de Baos (Palencia)Tel. 933.906.45 Fax. 933.906.45www.aciarium.com / [email protected]
-
8/2/2019 estructuras tensadas
50/52
49
WDS SHELF SYSTEMS
High Polished Stainless Steel
ART. NO. SHELF DEPTH. SHELF LOAD
ASHELF 200 mm 50 Kg
ASHELF2 300 mm 50 KgThe 3 mm wire shelf System isavailable with two different wall
distances and as many shelves
as required.
It is delivered with top and bot-
tom base incl. terminals and two
spacer bars - for either 200 mmor 300 mm wall distance.
The system is designed for soft
wire constructions, and shouldbe ordered one side at a time as
the length of the wire used, as
well as the choice of shelf com-
ponents, depends on individualneeds. Wire and components
must be ordered separately.
The system is suited for solidshelves or glass shelves up to
8 mm thickness and wooden
shelves of almost any size.
DIY SIGN ADJUSTER
High Polished Stainless Steel
NO. RIGHT NO. LEFT WIRE G D1 D2 D3 L1 L2 L3 L4 L5 B.L. KG. KG/100
A64DH06 A64DV06 3 M6 22 6 72 24 36 50 40 300 5,7
G
2 x M6 Socket Screw
L1
D1D2
D3
L5
L4
L2 L3
The vertical sign system is based ona 3 mm DIY adjuster terminal with
inside thread. Other options, usingother WDS ttings, are horizontal
signposts or signs hanging at various
angles .
NEWS
Dual thread screw tong page 6
C/Talgo. Parc.57-58,Polgono Industrial de Venta de Baos.C.P 34200 Venta de Baos (Palencia)Tel. 933.906.45 Fax. 933.906.45www.aciarium.com / [email protected]
-
8/2/2019 estructuras tensadas
51/52
50
WIRE
L1
D2
D1
WDS 3MM WIRE SHELF COMPONENTS
High Polished AISI 304
Single Glass Grip - Horizontal
ART. NO. WIRE L1 L2 L3 D1 MAX. LOAD
A6303 3 mm 30 ,7 Max 8 mm 6 50 Kg
Single Glass Grip - Swirvel
ART. NO. WIRE L1 L2 L3 D1 MAX. LOAD
A63203 3 mm 35 9,7 Max 8 mm 6 50 Kg
Single Wood Grip - Swirvel
ART. NO. WIRE L1 D1 WOOD SIZE D2 MAX. LOAD
A63303 3 mm 30 6 20 - 40 mm 6 50 Kg
L3
WIRE L1
L2
D1
L3
WIRE
L1
L2
D1
C/Talgo. Parc.57-58,Polgono Industrial de Venta de Baos.C.P 34200 Venta de Baos (Palencia)Tel. 933.906.45 Fax. 933.906.45www.aciarium.com / [email protected]
-
8/2/2019 estructuras tensadas
52/52
1. First slide the jaw housing in place on the cable.
2. Next, slide the jaws onto the cable leaving some space between the jaw sections.
3. Place the brass pressure ring on the end of the cable. Make sure that the distance from thepressure ring to the end of the cable is 5 mm.
4. Slide the jaw housing over the jaws.
5. The terminal can now be assembled. Screw the head firmly to the jaw housing with a spanner.Then tighten the lock nut firmly with a spanner.
6. When assembling the Swageless Terminal a non-acidic sealing compound must be used in the housing,sikaflex 221, for example.Disassemble the terminal and fill the jaw housing and the cavity with sealing compound, then assemblethe terminal. Repeat this until the sealing compound emerges from the hole through which the cable is inserted.
Clean the terminal. Do NOT reuse the jaws. Make sure that the dimensions of the terminal and cable match.
MaintenanceCheck the terminal regulary for damage in connection with longer exposure to concentrated saline solutions orpolluted surroundings. Check the seal, if it is broken remove all sealing compound. Then rinse the terminal withfresh water and treat it with WD40. Reseal the terminal with non-acidic sealing compound.
NoteAfter the first dynamic load the terminal MUST be tightened again. The terminal was developed for use with followingtypes of cable: 1x19, 7x19 and 7x7. The terminal can also be used with Dyform (compacted strand)When assembling swageless terminals the the breaking strength of the cable used will be reduced by 0-15 %.
ASSEMBLE INSTRUCTIONS
C/Talgo. Parc.57-58,Polgono Industrial de Venta de Baos.C.P 34200 Venta de Baos (Palencia)Tel. 933.906.45 Fax. 933.906.45www.aciarium.com / [email protected]