catalogo lrl nxt-m

8/12/2019 Catalogo Lrl Nxt-m

1/11

DISEO PENSADO EN EL FUTURO

DESEMPEO| CONFIABILIDAD| ESCALABILIDAD

MR


2/11

PANEL DE LEDS ESCALABLEDesconecte el conector del cable

y libere la placa de LEDS medianteel cierre de vuelta.

JUNTA / SELLIP66 Proteccin

el agua y el po

CIERRE DE ACCESO RPIDOAcceso sin herramientas.

FUENTE DE ALIMENTACIN ADesconecte el conector del cala fuente de alimentacin con

CUERPO DE ALUMINIOA360 De una sola pieza,de aluminio troquelado.

PRESENTANDO LA NXTMRLa serie de luminarias NXTMR es la ltimainnovacin de LED Roadway Lighting Ltd.(LRL). El diseo modular de NXTMR per-mite a los usuarios de una manera fcil yrpida actualizar o reemplazar las placasde LEDs o fuentes de alimentacin, sinnecesidad de herramientas, en menos

de un minuto. La NXTMR

tambin da a losclientes mayor exibilidad y libertad enel cambio de los patrones de distribucinptica y/o actualizar a la ms avanzadatecnologa LED en el futuro. La NXTMR es ideal para la iluminacinde calles y carreteras, zonas de estaciona-miento, y en general para aplicaciones deiluminacin de grandes reas al aire libre,contando con el mismo diseo y carac-tersticas de conabilidad de la serie deluminarias de LRL SatelliteMR, instaladasactualmente en ms de 37 pases.

DISPONIBLE EN DOS TAMAOS:

* POR FAVOR, REFIRASE A LAS HOJAS DE ESPECIFICACIONES PARA EL DETALLE DE LOS DATOS D

MODELO NXT* # DE LEDS CORRIENTES DEL DRIVER VOLTAJE TEMPERATUNXT-S 12, 24, 36 350, 450, 525, 600, 700 mA 120-240 5000K (StandNXT-M 48, 60, 72 350, 450, 525, 600, 700 mA 120-240 5000K (Stand

DESEMPEO| CONFIABILIDAD| ESCALABILIDAD

ACCESO SINHERRAMIENTAS

MR

ACCESRIO OPCIONALE:

FOTOCELDACon NEMA de seguridad de medio-giroTwist-Lock, con 20 aos de vida

NXT S(12, 24, & 36 LEDs)

NXT M (48, 60, & 72 LEDs)

SENSOR DE DEPRECIACIN DE LMENESAccesrio opcionale que monitorea y reporta la

depreciacin LED (mediante el sistema de control)

La luminaria NXT-S fue seleccionada paraincluirse en el prestigioso Informe de de-sarrollo de la Sociedad de Ingenieros enIluminacin (IES, por sus siglas en ingls),en donde se reconoce el avance nico yconsiderable de LRL en contribucin alarte y la ciencia de la iluminacin.


3/11

MDULO DE FUENTE AJUSTABLEANSI C-High (10kV/5kA)

Desconecte los cables y libereel mdulo con los clips.

MONTAJE UNIVERSALBrazo de montaje horizontal o montaje

superior para poste 42 60 mm (1.625 -2.375) D. E. (dimetro exterior).

LENTE DE CRISTALClasicacin IK09

ACABADO DURADEROAcabado en pintura en polvo polister.

PASO INTEGRADOS PARA MONTAJEPasos con incrementos de 2.5 que permiteel ajuste de una inclinacin hasta de 5.

CUMPLIMIENTODE LEY ARRA

INTERRUPTOR CON AJUSTE DE CAMPOUn interruptor opcional permite a losusuarios seleccionar entre 5 corrientesde transmisin disponibles (350, 450,

525, 600 y 700 mA).


4/11

115 Chain Lake Drive, Halifax, Nueva Escocia, B3S 1B3 CanadLnea gratuita: +1 (877) 533.5755 Lnea de fax gratuita: +1 (888) 533.5755 [email protected] www.ledroadwaylighting.com

Gabinete: Pieza nica, aluminio A360 fundidoTemperatura de funcionamiento: -40C a +40C (-40F a +104F)Montaje: Espigas con dimetro externo de 42 - 60 mm (1.625- 2.375)Mtodos de montaje: Montaje horizontal o montaje superior para postePeso: 11,8 kg (26 lb)Clasicacin EPA: < 0,084 m2 ( 0.90PTICA Y DESEMPEOFotometra (tipos de distribucin)Temperatura del color (CCT)ndice de rendimiento del colorCorrientes del driver (mA)Ecacia de la luminaria (Lm/W)*Salida de la luminaria (Lm)*LED L70 (horas)

Tipo II, Tipo III, IV, V5000K (estndar) y 4000K (opcional)

~70 (5%)350mA

1236,540

450mA120

8,190

525mA118

9,420

600mA115

10,570

700mA109

11,760> 100,000 horas (a 350mA)

FOTOCELDA Y CONTROLESOpciones de fotoceldaControl y monitoreo

20 aos de vida til de la fotocelda con Twist-Lock NEMA (estndar)La fuente de alimentacin con atenuacin (1-10 V) es equipo estndar. Disponible con Sis

350mA65 W

450mA84 W

525mA99 W

600mA113 W

700mA133 W

350mA78 W

450mA100 W

525mA117 W

600mA135 W

700m158 W

NXT-48M (48 LEDs) NXT-72M (72 LEDNXT-60M (60 LEDs)

NXT-48M (48 LEDs) NXT-72M (72 LEDNXT-60M (60 LEDs)

350mA123

8,020

450mA120

10,070

525mA117

11,540

600mA113

12,820

700mA109

14,550

350mA123

9,590

450mA119

11,930

525mA116

13,600

600mA112

15,140

700m107

17,01

NXT-48M (48 LEDs) NXT-60M (60 LEDs) NXT-72M (7

CUMPLE CON ARRA


5/11

115 Chain Lake Drive, Halifax, Nova Scotia, B3S 1B3 Canada Toll-Free Phone: +1 (877) 533.5755 Toll-Free Fax: +1 (888) 533.5755 [email protected] www.ledroadwaylighting.com

NXTTM SERIES LUMINAIRE: DISTRIBUTION PATTERN

2LBType II Standard

2HB

Type II Backlight

2ESType II Max Throw

2EMType II Moderate Throw


6/11

NXTTM SERIES LUMINAIRE: DISTRIBUTION PATTERN

3HBType III Backlight

4AHANZ High Throw

5SMType V Square

5RMType V Round


3LBType III Standard


7/11

NOTES:This table provides suggested replacements for HPS wattages based on LED Roadway Lightings experiences with end clients and ligIt is the ultimate responsibility of the end client to conrm suitability for their applications, and not the responsibility of LED Roadw

HIGH PRESSURE SODIUM (HPS)

HPS Fixture (Bulb Wattage)

50W

70W

100W

150W

200W

250W

400W

HPS System Wattage(Actual Fixture Consumption)

68

95

135

195

245

295

465

EquivalentNXTTM Series

NXT-12S-450 mA

NXT-24S-350 mA

NXT-24S-600 mA

NXT-36S-525 mA

NXT-48M-600 mA

NXT-60M-525 mA

NXT-72M-700 mA

NXTTM System Wattage(Actual Fixture Consumption)

17

28

46

60

93

102

162

Energy SavingsNXTTM over HPS

75%

71%

66%

69%

62%

65%

65%

LED ROADWAY LIGHTING ( NXTTM SERIES)


NXTTM SERIES: HPS TO LED EQUIVALENCY TABLE


8/11

NOTES:This table provides suggested replacements for MH wattages based on LED Roadway Lightings experiences with end clients and lighIt is the ultimate responsibility of the end client to conrm suitability for their applications, and not the responsibility of LED Roadw

METAL HALIDE MH

MH Fixture (Bulb Wattage)

70W

100W

175W

250W

400W

MH System Wattage(Actual Fixture Consumption)

98

122

208

290

459


NXT-12S-525 mA

NXT-24S-525 mA

NXT-24S-700 mA

NXT-36S-700 mA

NXT-60M-600 mA


20

41

55

82

116

Energy SavingsNXTTM over MH

80%

66%

74%

72%

75%


NXTTM SERIES: MH TO LED EQUIVALENCY TABLE



9/11

NOTES:This table provides suggested replacements for MV wattages based on LED Roadway Lightings experiences with end clients and lighIt is the ultimate responsibility of the end client to conrm suitability for their applications, and not the responsibility of LED Roadw

MERCURY VAPOR MV

MV Fixture (Bulb Wattage)

100W

125W

175W

250W

400W

MV System Wattage(Actual Fixture Consumption)

118

137

195

285

450


NXT-12S-525mA

NXT-12S-600 mA

NXT-24S-350 mA

NXT-36S-600 mA

NXT-60M-600 mA


14

23

28

70

116

Energy SavingsNXTTM over MV

88%

83%

86%

75%

74%


NXTTM SERIES: MV TO LED EQUIVALENCY TABLE



10/11

1.0 LUMINAIRE DESIGN AND PERFORMANCE

1.1 cULus , NOM, C-Tick, CE listed.1.2 Capable of 5 of vertical tilt, with a built-in step mount with increments of 2.5.1.3 Surge protection of 10kV, 5kA as per ANSI C62.41.

1.4 Tool-less surge protection module (i.e. replaced without a single tool).1.5 3G vibration testing as per ANSI C136.31 Roadway Luminaire Vibration.

Required documentation: Independent 3rd party laboratory report.1.6 Single-piece die-cast A360 aluminum housing. Housing shall not contain extruded aluminum, nor consist

of multiple pieces fastened using bolts, screws, or other mechanical fastening devices.1.7 Minimum Efficacy (Luminaire) of 105 Lm/W (350mA drive current, at 20C/68F ambient temperature).1.8 Lighting module (light engine and optics) shall be a single unit that is eld-upgradeable without the use

of a single tool, with a touch-time of less than 2 minutes.1.9 Lighting distribution pattern shall be eld changeable without the use of a single tool.1.10 Optics shall be covered by a at, IK09 rated glass lens.1.11 Power supply chamber shall be ingress protection rated IP66. Sealed power supplies in an IP54 or other

non-IP66 rated chamber shall not be acceptable.1.12 Luminaires IP66 chamber shall be tted with a lter to accommodate pressure differences between sealed

xture internal chambers and the outside environment.1.13 Area between heat sink ns shall be angled at a minimum of 5 to promote drainage, ice/snow removal,

and shedding of other debris.1.14 Shall have no exposed screws beyond those in the terminal block area, ground lug, and the door latch.1.15 Painted luminaires shall be tested in accordance with ASTM B117 to 1,000 hours.1.16 Independent 3rd party IES LM-79-08 report shall be provided for all luminaires submitted.1.17 Luminaire shall be equipped to accept optional integrated lumen depreciation sensor that measures LED ux.1.18 Luminaire shall be available with optional 20 year design life photocell with a minimum 10 year warranty.1.19 Shall be suitable for secure mounting on a 42-60mm (1.625 - 2.375) outside diameter horizontal tenon and

have optional vertical mount (post-top mount) capable of accepting 76mm (2.99) and 60mm (2.36) tenons.

2.0 LED SPECIFICATIONS

2.1 At 10,000 hours, LM-80 data shall demonstrate lumen maintenance of 97% or better at 85C/185F Junction Temperature and an operating current of 700mA.

2.2 LM-80 data shall demonstrate calculated L70 of 500,000 hours or higher at 85C/185F Junction Temperaturebased on minimum of 10,000 hours data at 700mA.

2.3 Correlated Color Temperature (CCT) shall be 5000K (400K), with a minimum CRI of 60 (Optional 4000K +/-400K).


NXTTM SERIES LUMINAIRE: PERFORMANCE SPECIFICATIONS


11/11

3.0 POWER SUPPLY DRIVER SPECIFICATIONS

3.1 Power supply shall be a high reliability system with design features and components that providefor a minimum of 20 years life expectancy at 20C/68F ambient temperature.

3.2 Power supply shall be upgradeable in the eld without the use of a single tool, with a touch- time

of less than 2 minutes.3.3 Maximum rated output of 700mA (> 700mA not acceptable).3.4 Power supply shall contain no tar or urethane-based potting materials. Required documentation:

Written conrmation of compliance from power supply manufacturer.

4.0 MANUFACTURING

4.1 Manufacturer shall have no less than ve (5) years of LED street light manufacturing experienceand a minimum of 100,000 LED street/roadway luminaires installed. Required documentation:Written conrmation from luminaire manufacturer.

4.2 ISO 9001 certication for power supply and light engine assembly facilities.4.3 Power supply and LED light engine assembly shall take place in a in a single RoHS certied facility for

quality and process control purposes. Required documentation: Certication of facility RoHS compliance4.4 Nitrogen shall be used in the soldering process. Required documentation: Compliance letter from the

electronics facility utilized.

5.0 WARRANTY

5.1 Manufacturer shall provide a 10 year luminaire warranty, which shall include housing, power supplyand LED light engine.

5.2 Manufacturer shall supply a 10 year power supply warranty from the 3rd party power supplymanufacturer (OEM), if luminaire manufacturer does not manufacture power supplies in-house.Required documentation: 10 year power supply warranty from power supply manufacturer.


NXTTM SERIES LUMINAIRE: PERFORMANCE SPECIFICATIONS

catalogo lrl nxt-m

Documents