presentation1[1].pptx manoj
Post on 07-Apr-2018
234 Views
Preview:
TRANSCRIPT
-
8/4/2019 Presentation1[1].pptx manoj
1/28
Presentation
on
Working Capital Managementin
UFLEX LTD, NOIDA
Presented By:
MANOJ KUMAR
FAYOL HOUSE
10101210
-
8/4/2019 Presentation1[1].pptx manoj
2/28
Company Profile
UFLEX (An ISO 9000 certified company) is one ofthe key players in the global packaging industry.
Since its inception in the year 1983 it has turned into a
multibillion company that values quality and customersatisfaction amongst other priorities.
With consumers spread across the world, Flex enjoys aglobal reach.
Today offers a reliable single window access to almosteverything related to flexible packaging. PrintingCylinder is one of the major products.
-
8/4/2019 Presentation1[1].pptx manoj
3/28
Success Story Of Uflex 1986 - Inception of Cylinder Division with acapacity 4 cylinder /day.
1990 - Capacity enhanced to 16 cylinder /day..Installed electronic engraving machine withancillary support system.
1993 - Capacity enhanced to 32 cylinder /day byinstalling a 2nd engraver. Quality improvement bygoing digital installation of electronic pre pressand online interfacing of pre press with theengraver.
-
8/4/2019 Presentation1[1].pptx manoj
4/28
Cont
1996 - Production capacity increase to 64
cylinder /day.
Today - Cylinders are today produced at anaverage of 120 cylinder /day approximately.
-
8/4/2019 Presentation1[1].pptx manoj
5/28
Customer Of UflexThe company's partial client list includes Unilever,
Pepsi, Wrigley, Procter & Gamble, Colgate, Palmolive,
Nestle, Gillette, Ranbaxy, Perfetti, Joyco, Monsanto,ITC, Godrej Pillsbury, Tata Tea, Hindustan Petroleum,
Indian Oil, Britannia, Dabur, Haldiram, HUL, Parle
Biscuit.
-
8/4/2019 Presentation1[1].pptx manoj
6/28
.
-
8/4/2019 Presentation1[1].pptx manoj
7/28
Department In UflexArts and pre-Press.
Production/Machine tool & section.
Plating.Electronics.
Polishing.
Engraving.
Proofing.
-
8/4/2019 Presentation1[1].pptx manoj
8/28
Cylinder DivisionUFLEX (An ISO 9000 certified company) is one of thekey players in the global packaging industry. UFLEX adynamic and creative organization, today offers a reliablesingle window access to almost everything related toflexible packaging. Printing Cylinder is one of the majorproducts.
Since its inception, the team has been driving hard tomaster each link in the chain of f lexible packaging
development and production. As a result of this drivestarted manufacturing Cylinders in the year 1986 and todayboasts of a production capacity of over 35,000 cylinders perannum.
-
8/4/2019 Presentation1[1].pptx manoj
9/28
Process Of Manufacturing CylinderArt/Pre-Press :-
Receive Order.
Collect Information.Make Results.
Check the Results.
Send Result to the Clients for making final decision.
-
8/4/2019 Presentation1[1].pptx manoj
10/28
Production/Machine Tool &
Selection Cylinder is to be processed for cleaning.
Cylinder is to be polished to remove some scratch oncylinder.
Different type of cylinder are used for different colors.
-
8/4/2019 Presentation1[1].pptx manoj
11/28
Plating Cylinder is to be processed by sulfuric Acid for
minimum 30 minutes.
Cylinder is to be covered with light copper layer.
Cylinder kept in machine for reduce the temperature.
-
8/4/2019 Presentation1[1].pptx manoj
12/28
Polishing & Engraving Extra material is remove from the cylinder.
Cylinder is to be processed for polishing.
Information is received from the arts department thatwhat is to be printed on cylinder.
Stylus diamond is used for engraving on the cylinder.
-
8/4/2019 Presentation1[1].pptx manoj
13/28
Proofing After completing engraving cylinder is sent in proofing
department.
If there is printing mistake this can be removed in proofingdepartment.
If there are other problem than this can be sent to the
plating department.
The final selection of proofing is made by ArtsDepartment.
-
8/4/2019 Presentation1[1].pptx manoj
14/28
OPERATING CYCLE Of UFLEX ICP
DCP
PDP
-
8/4/2019 Presentation1[1].pptx manoj
15/28
RATIONALE FOR THE STUDYWorking Capital is very important factor for every
business. Without Working Capital the day-to-dayactivities of a business cannot run.
Concept
Gross working capital
Net working capital
-
8/4/2019 Presentation1[1].pptx manoj
16/28
W.C. Ratio AnalysisIntroduction
Ratio analysis is the powerful tool of financial statementsanalysis. A ratio is define as the indicated quotient of twomathematical expressions and as he relationship betweentwo or more things. The absolute figures reported in thefinancial statement do not provide meaningful
understanding of the performance and financial position ofthe firm. Ratio helps to summaries large quantities offinancial data and to make qualitative judgment of the firmsfinancial performance.
-
8/4/2019 Presentation1[1].pptx manoj
17/28
Liquidity Ratio
Current Ratio
= Current Assets
Current Liabilities
(Rs in lacs)
Particulars 2008 2009 2010
Current Ratio 1.5 1.51 1.55
-
8/4/2019 Presentation1[1].pptx manoj
18/28
Quick ratio = Current Assets -Inventory
Current Liabilities
(Rs in lacs)
Particulars 2008 2009 2010
Quick Ratio 0.85 0.91 0.92
Quick Ratio
-
8/4/2019 Presentation1[1].pptx manoj
19/28
Fixed Assets Turnover ratio Fixed assets turnover ratio:
= Sales
Net fixed assets
Particular 2010 2009 2008
F.A.T.R 0.86 0.88 0.78
-
8/4/2019 Presentation1[1].pptx manoj
20/28
Findings
Increase in inflation effect Consumer income.
Due to lot of Innovation in Technology, there are
increasing competition among the Industry.
New laws, trends, rule & regulation make the negativeimpact on the growth of Industry.
-
8/4/2019 Presentation1[1].pptx manoj
21/28
THANK YOU
-
8/4/2019 Presentation1[1].pptx manoj
22/28
-
8/4/2019 Presentation1[1].pptx manoj
23/28
-
8/4/2019 Presentation1[1].pptx manoj
24/28
-
8/4/2019 Presentation1[1].pptx manoj
25/28
-
8/4/2019 Presentation1[1].pptx manoj
26/28
-
8/4/2019 Presentation1[1].pptx manoj
27/28
-
8/4/2019 Presentation1[1].pptx manoj
28/28
top related