bomba serie 90 100
Post on 28-Oct-2015
111 Views
Preview:
TRANSCRIPT
BLN-2-41672 May, 1996
PumpService Parts Manual
100 cc - Axial Piston
Series 90
saue Genuine Parts Original
Ersatzteile
2
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
Contents
Unit and Service Parts Identification ............................................................................................................... 3-4
Order Code ...................................................................................................................................................... 5
Common Parts ................................................................................................................................................ 6-9
Displacement Limitation ............................................................................................................................. 10-11
End Cap ...................................................................................................................................................... 12-13
Charging System ........................................................................................................................................ 14-15
Auxiliary Mounting Flange .......................................................................................................................... 16-19
Charge Pressure ........................................................................................................................................ 20-21
Shaft ........................................................................................................................................................... 20-21
Control ........................................................................................................................................................ 22-31
Filtration ...................................................................................................................................................... 32-33
High Pressure Regulation ........................................................................................................................... 34-35
Orifice ......................................................................................................................................................... 36-39
Special Hardware/Side Cover .................................................................................................................... 40-43
Overhaul Kit .................................................................................................................................................... 43
BLN-10107 ................................................................................................................................................. 44-45
SB-8809 ...................................................................................................................................................... 46-47
SB-8816 ...................................................................................................................................................... 48-49
SB-8823 ...................................................................................................................................................... 50-51
SB-8824 ...................................................................................................................................................... 52-53
SB-8902 ...................................................................................................................................................... 54-55
SB-8903 ...................................................................................................................................................... 56-57
SB-8906 ...................................................................................................................................................... 58-59
SB-8923 ...................................................................................................................................................... 60-61
SB-9203 ...................................................................................................................................................... 62-63
SB-9211 ...................................................................................................................................................... 64-65
SB-9301 ...................................................................................................................................................... 66-69
SB-9302 ...................................................................................................................................................... 70-71
SB-9312 ...................................................................................................................................................... 72-73
SB-9315 ...................................................................................................................................................... 74-75
SB-9413 ...................................................................................................................................................... 76-77
SB-9417 ...................................................................................................................................................... 78-79
SB-9418 ...................................................................................................................................................... 80-81
SB-9435 ...................................................................................................................................................... 82-83
SB-9436 ...................................................................................................................................................... 84-85
SB-9503 ...................................................................................................................................................... 86-87
SB-9510 ...................................................................................................................................................... 88-89
SB-9514 ...................................................................................................................................................... 90-91
SB-9515 ...................................................................................................................................................... 92-93
SB-9525 ...................................................................................................................................................... 94-95
Copyright 1993, 1994, 1995, 1996 Sauer-Sundstrand. All rights reserved.Contents subject to change. Information contained herein should be confirmed before placing orders.Printed in U.S.A.
3
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
Service Parts Identification
The following information and procedure is used to identify the module group, item number, manufactured date,part number, and part name of the parts included in the Series 90 Pump.
The parts listed include all parts which may be used when performing either "Minor Repairs", "Major Repairs", or"Conversions" on the Series 90 Pump.
saue
Model Code Typ
Serial No. Fabr NrMADE IN GERMANY
Model No. Ident Nr
Ames, Iowa, U.S.A. Neumünster, Germany
saue
Model Code Typ
Serial No. Fabr NrMADE IN U.S.A.
Model No. Ident Nr
90R100 MA 1 B6 S 3 C6 C 03NNN 42 42 20
- Nameplate -
96 – 2062A – 92 – 26 – 12345
123456N – 92 – 26 – 12345
Each pump will have a nameplate affixed to the housing. Thename plate will include the following information.
Model CodeThe Sauer-Sundstrand model code completely defines thespecific unit and must be used when ordering the complete unitfor the first time or for ordering parts to service the product.
Model NumberThe Sauer-Sundstrand model number is used by the factory inmanufacturing. On repeat orders, a complete unit can also beordered by the model mumber.
Serial NumberThe Sauer-Sundstrand serial number is used to identify themanufacturing location, manufacturing date and the unit se-quence in the build. The serial number is also used to identifythe unit's warranty time period.
Identification NumberPumps manufactured in Germany will have an identificationnumber instead of a model number.
The letter code indicates the location of original manufacture(assembly). "A" indicates the unit was originally assembledin Ames, Iowa, USA. "N" indicates the unit was originallyassembled in Neumünster, Germany.
The first number (2 digits) indicates the year of manufacture.("92" would indicate the unit was manufactured in 1992)
The second number (2 digits) indicates the calender week ofmanufacture.
The third number (5 digits) is a sequential number used toidentify a specific unit.
90R100 MA 1 B6 S 3 C6 C 03NNN 42 42 20
Ames, Iowa, U.S.A. Neumünster, Germany
4
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
Date Code
The date code is defined as the year and week of manufacture. The same reference number may list more than onepart number. This indicates that there is more than one configuration for that reference number. You will see that thereare different date codes for the different part numbers. Find the date code of your unit via the nameplate to determinewhich service part number you need to order.
EXAMPLE: The service part desired is Item G302.
Order Date Code Qty. perCode Item Begin → End Part Number Description Model
2 G302 89-46 → 8200212 End cap gasket (SB-9203) 1“ 87-02 → 89-45 8200043 End cap gasket (SB-8923) 1
All units using this module group with a date code of 87-02 and up to and including 89-45 must use part number“8200043”. All units with a date code of 89-46 and up must use part number “8200212”.
Service Bulletins
A Service Bulletin Number (SB- _ _ _ _) may follow the “Description” of the part you desire. You must read thatService Bulletin prior to ordering that part. A copy of each of these Service Bulletins, as of the print date of thisbulletin, are included at the end of this manual. Service Bulletins contain more detailed information such asinterchangeability, what additional parts are involved, etc. It is suggested that you add additional Service Bulletinsto this manual as you receive them.
Procedure to Identify a Given Part/Part Number
GeneralThe modular design of Series 90 units results in a simplified Service Parts List and Part Identification Procedure.
The same item numbers are used for same part description on all units within a product type. (Example: The shaft seal- Item Number L40 has the same item number on all variable displacement pumps.)
All Item Numbers begin with a letter. The letter identifies a particular module. (Example: any items beginning with “K”relate to the charge relief valve; items beginning with “L” relate to the drive shaft components, etc.)
Example of a Part Identification
The nameplate on a Series 90 pump has an Order Code of 90L100 EP 1 V 6 P 3 S4 E 05 NNN 38 38 20. Use thefollowing procedures to determine the part number of the filtration kit used on this pump.
1) Referring to the filtration module in the Model Code (see page 5), the filtration option for this unit is identified bythe code “P” (90L100 EP 1 V 6 P 3 S4 E 05 NNN 38 38 20)2) Referring to the Service Parts List, find the filtration group. Next find the order code that relates to this unit, whichis “P”. The filtration kit is found to be item N00M and part number 8002N00M-A. Also note that the saleable partsincluded in this kit are indented, which indicates the filter is not included in the kit.
5
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
9 0
Series
Rotation
Pump Size (cc)
Control Type
Pressure Regulation
Auxilary Mounting Pad
End Cap Ports
Filtration Displacement Limitation
Input Shaft
Charge Pressure Setting
High Pressure Setting Port A
High Pressure Setting Port A
Control Orifice
Charging System
R 1 0 0 M A 1 B 6 S 3 C 6 C 0 3 N N N 4 2 4 2 2 0
Special Hardware Features
6
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
Common Parts
G502
G542
G502
B70
G172
B70
B80
B90
G522
G502
B90B82
L50
L70
L40L30
L60
G502
G502
G522
Side Port End Cap
Twin Port End Cap
G952
G902
G94
G95G93
G952
G94
G95G93
L10L20G532
Enlarged bold type item numbers
are Recommended parts to be
stocked for servicing.
G901
B71
G511
G512
7
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
Order Date Code Qty. perCode Item Begin → End Part Number Description Model/Kit
B70 87-02 → 9005110-5600 Plug 2B71 87-02 → 9005110-4400 Plug 1B80 87-02 → 9005110-9000 Plug 1B82 92-12 → 9005110-5600 Plug (SB-9203) 1B90 87-02 → 9803390 Control filter screen 3G93 92-12 → 8800564 Spacer (SB-9203) 1
“ 87-02 → 92-11 8800404 Spacer 1G94 92-12 → 8800565 Lifting bracket (SB-9203) 1
“ 87-02 → 92-11 8800522 Lifting bracket 1G95 92-12 → 9009610-3459 Washer (SB-9203) 1
“ 87-02 → 92-11 9009610-2850 Washer 1G172 92-12 → 9005110-4400 Plug 1G502 87-02 → 9005100-5600 Plug 3G511 87-02 → 9005110-5600 Plug 1G512 87-02 → 9005110-4400 Plug 1G522 87-02 → 9005110-5600 Plug 1G532 87-02 → 9005110-5600 Plug 1G542 87-02 → 9005110-5600 Plug 1G901 92-12 → 9007314-0810 Screw (SB-9203) 1
“ 89-46 → 92-11 9007314-0608 Screw 1G902 92-12 → 9007314-0810 Screw (SB-9203) 1
“ 89-46 → 92-11 9007314-0608 Screw 1“ 87-02 → 89-45 9007314-0607 Screw 1
G952 92-12 → 9007314-0810 Screw (SB-9203) 1“ 87-02 → 92-11 9007314-0608 Screw 1
L10 87-02 → 683722 Roller bearing 1L20 87-02 → 9006300-0175 Retaining ring 1L30 87-02 → 8200112 Seal carrier 1L40 87-02 → 9008000-0114 Lip seal 1L50 87-02 → 9004104-1540 O-ring 1L60 87-02 → 8200135 Retainer plate 1L70 87-02 → 9007314-0605 Screw, M6 x 20 4
Bold Items indicate recommended parts to be stocked for servicing
100 cc Variable Displacement Pump
8
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
Common Parts
B10
B50B20
B20
B50
B30
D55
D10F20
D95D60
D65
D70
D50 D80
D85
D14
D75
Enlarged bold type item numbers
are Recommended parts to be
stocked for servicing.
D01
9
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
Order Date Code Qty. perCode Item Begin → End Part Number Description Model/Kit
B10 92-12 → 8200305 Variable housing (SB-9435) 1B20 87-02 → 9004800-1904 Pin 2B30 87-02 → 8200053 Bearing 1B50 87-02 → 9004800-3708 Pin 2
D01 88-16 → 8200192 Swashplate assy. (SB-8809) 1D10 88-16 → 8200268 Servo arm assembly (SB-9315) 1D14 87-02 → 8200344 Feedback link (SB-9609) 1D50 88-16 → 8200232 Swashplate (SB-8809) 1D55 87-02 → 9007276-0111 Screw 1D60 87-02 → 8800669 Swashplate guide 1D65 87-02 → 9007375-0032 Screw (SB-9211) 1D70 87-02 → 9009625-0146 Washer 1D75 87-02 → 9004875-0098 Spiral head pin 1
D80 87-02 → 8200273 Cage locator link (SB-9417) 1D85 87-02 → 8100235 Pin 1D95 87-02 → 8200058 Spring 1F20 87-02 → 8200225 Slider block 1
Bold Items indicate recommended parts to be stocked for servicing
100 cc Variable Displacement Pump
10
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
Displacement Limitation
F603
F40
S01
F50
F50F40
F60S02
F12 F11
S10
F11F12
F50F40
F60
S04
F344F354
F603
F40
S03
F50
F344F354
Enlarged bold type item numbers
are Recommended parts to be
stocked for servicing.
11
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
100 cc Variable Displacement Pump
Displacement Limitation GroupOrder Date Code Qty. perCode Item Begin → End Part Number Description Model/Kit
3 S02 87-02 → 8202F003-A Servo sleeve kit - No limitation 1F40 87-02 → 9004104-0350 O-ring 1F50 87-02 → 9004104-0340 O-ring 1F60 87-02 → 9007210-0804 Screw 3
S03 87-02 → 8202F003-A Servo sleeve kit - No limitation 1F40 87-02 → 9004104-0350 O-ring 1F50 87-02 → 9004104-0340 O-ring 1F60 87-02 → 9007210-0804 Screw 3
4 S01 87-02 → 8202F004-A Servo sleeve kit - Adjustable 1F40 87-02 → 9004104-0350 O-ring 1F50 87-02 → 9004104-0340 O-ring 1F60 87-02 → 9007210-0804 Screw 3
F344 87-02 → 9007712-0814 Set screw 1F354 87-02 → 9003509-0008 Seal nut 1
S04 87-02 → 8202F004-A Servo sleeve kit - Adjustable 1F40 87-02 → 9004104-0350 O-ring 1F50 87-02 → 9004104-0340 O-ring 1F60 87-02 → 9007210-0804 Screw 3
F344 87-02 → 9007712-0814 Set screw 1F354 87-02 → 9003509-0008 Seal nut 1
F S02 96-01→ 8510124 Servo sleeve kit, no limitation 1F40 96-01 → 9004104-0350 O-ring 1F50 96-01 → 9004104-0340 O-ring 1F60 96-01 → 9007210-0804 Screw 3
S03 96-01 → 8510124 Servo sleeve kit - No limitation 1F40 96-01 → 9004104-0350 O-ring 1F50 96-01 → 9004104-0340 O-ring 1F60 96-01 → 9007210-0804 Screw 3
S10 87-02 → 82020S10 Servo piston kit (SB-8809) 1F11 87-02 → 9004100-1310 O-ring 2F12 87-02 → 8700067 Piston ring 2
Bold Items indicate recommended parts to be stocked for servicing
12
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
G182
G302
G042
G20
G40
G041
G20
G40
Enlarged bold type item numbers
are Recommended parts to be
stocked for servicing.
Side Port End Cap
Twin Port End Cap
G961
G63G64
G63
G64
End Cap
13
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
G: End Cap GroupOrder Date Code Qty. perCode Item Begin → End Part Number Description Model/Kit
1 G041 92-12 → 8200235 End cap, twin ports (SB-9203) 1G20 87-02 → 8700030 Journal bearing 1G40 87-02 → 8700008 Bushing 1G63 87-02 → 8700074 Split clamp 4G64 87-02 → 9007200-4426 Screw 4
G302 87-02 → 8200212 End cap gasket (SB-9203) 1G961 92-12 → 95-06 9007314-0808 Screw (SB-9435) 1G961 87-02 → 92-11 9007314-0607 Screw 1
2 G042 89-46 → 89-46 8200236 End cap, side ports (SB-9203) 1G20 87-02 → 8700030 Journal bearing 1G40 87-02 → 8700008 Bushing 1G63 87-02 → 8700074 Split clamp 4G64 87-02 → 9007200-4426 Screw 4
G182 92-12 → 9005110-4400 Plug (SB-9203) 1G302 89-46 → 8200212 End cap gasket (SB-9203) 1
“ 87-02 → 89-45 8200043 End cap gasket (SB-8923) 1G961 92-12 → 95-06 9007314-0808 Screw (SB-9435) 1
" 87-02 → 92-11 9007314-0607 Screw 1
6 G042 89-46 → 89-46 8200236 End cap, side ports (SB-9203) 1G20 87-02 → 8700030 Journal bearing 1G40 87-02 → 8700008 Bushing 1
G182 92-12 → 9005110-4400 Plug (SB-9203) 1G302 89-46 → 8200212 End cap gasket (SB-9203) 1
“ 87-02 → 89-45 8200043 End cap gasket (SB-8923) 1G961 92-12 → 95-06 9007314-0808 Screw (SB-9435) 1
" 87-02 → 92-11 9007314-0607 Screw 1
8 G041 92-12 → 8200235 End cap, twin ports (SB-9203) 1G20 87-02 → 8700030 Journal bearing 1G40 87-02 → 8700008 Bushing 1
G302 87-02 → 8200212 End cap gasket (SB-9203) 1G961 92-12 → 95-06 9007314-0808 Screw (SB-9435) 1
" 87-02 → 92-11 9007314-0607 Screw 1
H G042 94-29 → 8200294 End cap, metric side ports 1G20 94-29 → 8700030 Journal bearing 1G40 94-29 → 8700008 Bushing 1
G182 94-29 → 9005110-4400 Plug 1G302 94-29 → 8200212 End cap gasket 1
M G042 94-15→ 8200284 End cap, metric side ports, secial 1G20 94-15 → 8700030 Journal bearing 1G40 94-15 → 8700008 Bushing 1
G182 94-15 → 9005110-4400 Plug 1G302 94-15 → 8200212 End cap gasket 1
Bold Items indicate recommended parts to be stocked for servicing
100 cc Variable Displacement Pump
14
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
Charging System
H05
H40H50
H60
H80
H70
H90L
H05LH50
H90L
Enlarged bold type item numbers
are Recommended parts to be
stocked for servicing.
15
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
100 cc Variable Displacement Pump
H: Charging System GroupOrder Date Code Qty. perCode Item Begin → End Part Number Description Model/Kit
D H05 93-10 → 8200238 Charge pump-17cc (SB-9301*) 1H40 87-02 → 9004800-1224 Pin 1H50 93-10 → 8100476 Charge pump shaft (SB-9301*) 1
“ 88-48 → 93-09 337956 Charge pump shaft (SB-8906) 1“ 87-02 → 88-47 8100142 Charge pump shaft 1
H60 87-02 → 9003310-1208 Key 1H70 87-02 → 8800424 Retaining plate 1H80 87-02 → 9007210-0604 Screw 6
E H05 93-10 → 8200239 Charge pump-20cc (SB-9301*) 1H40 87-02 → 9004800-1224 Pin 1H50 93-10 → 8100476 Charge pump shaft (SB-9301*) 1
“ 88-48 → 93-09 337956 Charge pump shaft (SB-8906) 1“ 87-02 → 88-47 8100142 Charge pump shaft 1
H60 87-02 → 9003310-1208 Key 1H70 87-02 → 8800424 Retaining plate 1H80 87-02 → 9007210-0604 Screw 6
F H05 93-10 → 8200240 Charge pump-26cc (SB-9301*) 1H40 87-02 → 9004800-1224 Pin 1H50 93-10 → 8100476 Charge pump shaft (SB-9301*) 1
“ 88-48 → 93-09 337956 Charge pump shaft (SB-8906) 1“ 87-02 → 88-47 8100142 Charge pump shaft 1
H60 87-02 → 9003310-1208 Key 1H70 87-02 → 8800424 Retaining plate 1H80 87-02 → 9007210-0604 Screw 6
L H05L 87-02 → 8800466-0100 Charge pump spacer 1H50 93-10 → 8100476 Charge pump shaft (SB-9301*) 1
“ 88-48 → 93-09 337956 Charge pump shaft (SB-8906) 1“ 87-02 → 88-47 8100142 Charge pump shaft 1
H70 87-02 → 8800424 Retaining plate 1H80 87-02 → 9007210-0604 Screw 6
H90L 87-02 → 9005110-9500 Plug 1
* For additional information regarding replacement parts for unitsbuilt prior to 93-10, refer to BLN-10107 in the appendix
Bold Items indicate recommended parts to be stocked for servicing
16
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
Auxiliary Mounting Pad
J92
J10
J70
J95
J90
J50
J
J80
J60
J15J30
L
J40
Enlarged bold type item numbers
are Recommended parts to be
stocked for servicing.
17
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
100 cc Variable Displacement Pump
J: Auxiliary Mounting Pad GroupOrder Date Code Qty. perCode Item Begin → End Part Number Description Model/Kit
A J 87-02 → 8202J00A-A Aux. mtg. A flange kit, 9T 1J10 87-02 → 8100147 Coupling 1J15 87-02 → 8800832 Cover assy., CW (SB-9301*) 1
“ 87-02 → 8800833 Cover assy., CCW (SB-9301*) 1J30 87-02 → 8700008 Bushing 1J50 87-02 → 9004104-1580 O-ring 1J60 87-02 → 8800172 Flange adaptor 1J70 87-02 → 9009625-0132 Washer 4J80 89-46 → 9007314-1623 Screw (SB-8923) 4
“ 87-02 → 89-45 9007314-1624 Screw 4J90 87-02 → 9004100-0420 O-ring 1J40 87-02 → 92-29 9004104-0440 O-ring 1J92 87-02 → 9802336 Cover plate 1J95 87-02 → 9007200-3714 Screw 2
B J 87-02 → 8202J00B-A Aux. mtg. B flange kit, 13T 1J10 87-02 → 8100148 Coupling 1J15 87-02 → 8800832 Cover assy., CW (SB-9301*) 1
“ 87-02 → 8800833 Cover assy., CCW (SB-9301*) 1J30 87-02 → 8700008 Bushing 1J50 87-02 → 9004104-1580 O-ring 1J60 87-02 → 8800173 Flange adaptor 1J70 87-02 → 9009625-0132 Washer 4J80 89-46 → 9007314-1623 Screw (SB-8923) 4
“ 87-02 → 89-45 9007314-1624 Screw 4J90 87-02 → 9004104-0440 O-ring 1J40 87-02 → 92-29 9004104-0440 O-ring 1J92 87-02 → 4460370 Cover plate 1J95 87-02 → 9007200-5021 Screw 2
C J 87-02 → 8202J00C-A Aux. mtg. C flange kit, 14T 1J10 87-02 → 8100149 Coupling 1J15 87-02 → 8800832 Cover assy., CW (SB-9301*) 1
“ 87-02 → 8800833 Cover assy., CCW (SB-9301*) 1J30 87-02 → 8700008 Bushing 1J50 87-02 → 9004104-1580 O-ring 1J60 87-02 → 723205 Flange adaptor 1J70 87-02 → 9009625-0132 Washer 4J80 89-46 → 9007314-1623 Screw (SB-8923) 4
“ 87-02 → 89-45 9007314-1624 Screw 4J90 87-02 → 9004100-0480 O-ring 1J40 87-02 → 92-29 9004104-0440 O-ring 1J92 87-02 → 8800406 Cover plate 1J95 87-02 → 9007200-5021 Screw 4
* The new style covers are interchangable with either charge pump design
Bold Items indicate recommended parts to be stocked for servicing
18
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
Auxiliary Mounting Pad
J92
J10
J70
J95
J90
J50
J
J80
J60
J40
Enlarged bold type item numbers
are Recommended parts to be
stocked for servicing.
J15J30
L
J15NJ30
J40NJ80N
19
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
100 cc Variable Displacement Pump
J: Auxiliary Mounting Pad GroupOrder Date Code Qty. perCode Item Begin → End Part Number Description Model/Kit
N J15N 87-02 → 8800834 Charge pump cover (SB-9301*) 1J30 87-02 → 8700008 Bushing 1
J40N 87-02 → 9004104-0440 O-ring 1J80N 89-46 → 9007210-1621 Screw (SB-8923) 4
“ 87-02 → 89-45 9007210-1622 Screw 4
T J 87-02 → 8202J00T-A Aux. mtg. A flange kit, 11T 1J10 87-02 → 8100297 Coupling 1J15 87-02 → 8800832 Cover assy., CW (SB-9301*) 1“ 87-02 → 8800833 Cover assy., CCW (SB-9301*) 1
J30 87-02 → 8700008 Bushing 1J50 87-02 → 9004104-1580 O-ring 1J60 87-02 → 8800172 Flange adaptor 1J70 87-02 → 9009625-0132 Washer 4J80 89-46 → 9007314-1623 Screw (SB-8923) 4“ 87-02 → 89-45 9007314-1624 Screw 4
J90 87-02 → 9004100-0420 O-ring 1J40 87-02 → 92-29 9004104-0440 O-ring 1J92 87-02 → 9802336 Cover plate 1J95 87-02 → 9007200-3714 Screw 2
V J 87-02 → 8202J00V-A Aux. mtg. B-B flange kit, 15T 1J10 87-02 → 8100273 Coupling 1J15 87-02 → 8800832 Cover assy., CW (SB-9301*) 1“ 87-02 → 8800833 Cover assy., CCW (SB-9301*) 1
J30 87-02 → 8700008 Bushing 1J50 87-02 → 9004104-1580 O-ring 1J60 87-02 → 8800173 Flange adaptor 1J70 87-02 → 9009625-0132 Washer 4J80 89-46 → 9007314-1623 Screw (SB-8923) 4“ 87-02 → 89-45 9007314-1624 Screw 4
J90 87-02 → 9004104-0440 O-ring 1J40 87-02 → 92-29 9004104-0440 O-ring 1J92 87-02 → 4460370 Cover plate 1J95 87-02 → 9007200-5021 Screw 2
Bold Items indicate recommended parts to be stocked for servicing
20
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
Shaft
Enlarged bold type item numbers
are Recommended parts to be
stocked for servicing.
L1
L1 L9
L8
L6
L1
L8
K000
K90
K10
K50
K70
K80
21
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
100 cc Variable Displacement Pump
K: Charge Pressure Setting
Order Date Code Qty. perCode Item Begin → End Part Number Description Model/Kit00-30 K000 87-02 → 8002K000-A Adj. charge relief kit (SB-8902) 1
K10 87-02 → 8800488-2000 Plug assembly (SB-8902) 1K50 87-02 → 9004201-6200 O-ring (SB-8902) 1K70 87-02 → 8800197 Spring, 10-30 bar (SB-8902) 1K80 87-02 → 8800449 Poppet (SB-8902) 1K90 87-02 → 9003575-0101 Nut (SB-8902) 1
31-42 K10 94-13 → 8800488-2000 Plug assembly 1K50 94-13 → 9004201-6200 O-ring 1K70 94-13 → 344127 Spring, 31-42 bar 1K80 94-13 → 8800449 Poppet 1K90 94-13 → 9003575-0101 Nut 1
L: Shaft Group
C7 L1 89-46 → 8200169 Shaft, 23 t 16/32 (SB-8923) 1“ 87-02 → 89-45 8200119 Shaft, 23 t 16/32 1
F1 L1 89-46 → 8200170 Shaft, 13 t 8/16 (SB-8923) 1“ 87-02 → 89-45 8200118 Shaft, PV, 13 t 8/16 1
K3 L1 89-46 → 8200176 Shaft, 1.750 str. key (SB-8923) 1“ 87-02 → 89-45 8200164 Shaft, 1.750 str. key 1L8 87-02 → 9003261-3724 Key 1
S1 L1 89-46 → 8200171 Shaft, 14 t 12/24 (SB-8923) 1“ 87-02 → 89-45 8200143 Shaft, 14 t 12/24 1
TF L1 89-46 → 8200179 Shaft, tapered spline (SB-8923) 1“ 87-02 → 89-45 8200132 Shaft, tapered spline 1L9 87-02 → 9700189 Slotted nut 1
T2 L1 89-46 → 8200173 Shaft, 1.500 tapered (SB-8923) 1“ 87-02 → 89-45 8200133 Shaft, 1.500 tapered 1L6 87-02 → 9004600-1230 Cotter pin 1L8 87-02 → 9003310-3724 Key 1L9 87-02 → 9700169 Slotted nut 1
Bold Items indicate recommended parts to be stocked for servicing
22
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
Control
M90D D
M11
M90C
C
M11
M1C
E
M11
M95E
M96E
M98EM90E
M97E
M9E
M1E
Enlarged bold type item numbers
are Recommended parts to be
stocked for servicing.
M1D
23
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
100 cc Variable Displacement Pump
M: Control GroupOrder Date Code Qty. perCode Item Begin → End Part Number Description Model/Kit
CA C 87-02 → 8102M0CA-A Control cover plate kit 1M11 87-02 → 8800923 Control gasket 1M1C 87-02 → 8800336 Cover plate 1
M90C 87-02 → 9007314-0606 Screw 6(No feedback link on Swashplate)
CB C 87-02 → 8102M0CA-A Control cover plate kit 1M11 87-02 → 8800923 Control gasket 1M1C 87-02 → 8800336 Cover plate 1
M90C 87-02 → 9007314-0606 Screw 6(Feedback link on Swashplate)
DC D 87-02 → 8102M0DC-A Control kit,3 position sol.,12v 1M11 87-02 → 8800923 Control gasket 1M1D 87-02 → 344010 Control, 3 position, 12v 1
M90D 87-02 → 9007314-0606 Screw 6
DD D 87-02 → 8102M0DD-A Control kit,3 position sol.,24v 1M11 87-02 → 8800923 Control gasket 1M1D 87-02 → 354159 Control, 3 position, 24v 1
M90D 87-02 → 9007314-0606 Screw 6
EA E 87-02 → 8202M0EA-B EDC kit w/MS connector 1M11 87-02 → 8800923 Control gasket 1M1E 87-02 → MCV111B1002 EDC, MS connector 1M9E 87-02 → MCV110A1017 PCP type 3 oil filled 1
M95E 87-02 → 9004104-0120 O-ring 2M96E 87-02 → 9004104-0140 O-ring 1M97E 87-02 → 9004104-0240 O-ring 1M98E 87-02 → 9007315-0504 Screw 4M90E 87-02 → 9007314-0611 Screw 6
EN M11 87-02 → 8800923 Control gasket 1M1E 87-02 → MCV114A1007 EDC, MS connector 1M9E 87-02 → MCV116A3501 PCP type 3, oil filled, MS conn. 1
M95E 87-02 → 9004104-0120 O-ring 2M96E 87-02 → 9004104-0140 O-ring 1M97E 87-02 → 9004104-0240 O-ring 1M98E 87-02 → 9007315-0504 Screw 4M90E 87-02 → 9007314-0611 Screw 6
EP E 87-02 → 8202M0EP-B EDC kit w/packard connector 1M11 87-02 → 8800923 Control gasket 1M1E 87-02 → MCV111B1004 EDC1, packard connector 1M9E 87-02 → MCV110A1058 PCP type 3 oil filled 1
M95E 87-02 → 9004104-0120 O-ring 2M96E 87-02 → 9004104-0140 O-ring 1M97E 87-02 → 9004104-0240 O-ring 1M98E 87-02 → 9007315-0504 Screw 4M90E 87-02 → 9007314-0611 Screw 6
Bold Items indicate recommended parts to be stocked for servicing
24
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
Control
Enlarged bold type item numbers
are Recommended parts to be
stocked for servicing.
H M11
M90H
M1H
E
M11
M95E
M96E
M98E
M90E
M97E
M9E
M1E
25
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
100 cc Variable Displacement Pump
M: Control GroupOrder Date Code Qty. perCode Item Begin → End Part Number Description Model/Kit
EX E 87-02 → 8202M0EX-B EDC1 kit w/metri-pak connector 1M11 87-02 → 8800923 Control gasket 1M1E 87-02 → MCV111B1006 EDC1, metri-pak connector 1M9E 87-02 → MCV110A1090 PCP type 3 oil filled 1
M95E 87-02 → 9004104-0120 O-ring 2M96E 87-02 → 9004104-0140 O-ring 1M97E 87-02 → 9004104-0240 O-ring 1M98E 87-02 → 9007315-0504 Screw 4M90E 87-02 → 9007314-0611 Screw 6
EZ M11 87-02 → 8800923 Control gasket 1M1E 87-02 → MCV111E1002 EDC, ms connector 1M9E 87-02 → MCV110A1017 PCP type 3 oil filled 1
M95E 87-02 → 9004104-0120 O-ring 2M96E 87-02 → 9004104-0140 O-ring 1M97E 87-02 → 9004104-0240 O-ring 1M98E 87-02 → 9007315-0504 Screw 4M90E 87-02 → 9007314-0611 Screw 6
HF H 87-02 → 8202M0HF-A HDC2, 3-11 bar 1M1H 87-02 → MCV115A1003 HDC2, 3-11 bar (44-160 psi) 1M11 87-02 → K11420 Control gasket (SB-9302) 1
M90H 87-02 → 9007314-0611 Screw 6
HK H 87-02 → 8202M0HK-A HDC2, 1-11 bar 1M1H 87-02 → MCV115A1002 HDC2, 1-11 bar 1M11 87-02 → K11420 Control gasket (SB-9302) 1
M90H 87-02 → 9007314-0611 Screw 6
HM H 87-02 → 8202M0HM-A HDC, 1.1-6.7 bar 1M1H 87-02 → MCV115A1001 HDC2, 1-11 bar 1M11 87-02 → K11420 Control gasket (SB-9302) 1
M90H 87-02 → 9007314-0611 Screw 6
HS H 87-02 → 8202M0HS-A HDC, 6-18 bar 1M1H 87-02 → MCV115E1008 HDC2, 6-18 bar 1M11 87-02 → K11420 Control gasket (SB-9302) 1
M90H 87-02 → 9007314-0611 Screw 6
HT M11 87-02 → K11420 Control gasket (SB-9302) 1M1H 87-02 → MCV115A1002 HDC, 4-16 bar 1
M90H 87-02 → 9007314-0611 Screw 6
Bold Items indicate recommended parts to be stocked for servicing
26
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
Control
Enlarged bold type item numbers
are Recommended parts to be
stocked for servicing.
M11
S40M90M
M1M
M7M
M72M
M71M
M76M
M75M
M78M
M77M
M
E
M11
M95E
M96E
M98E
M90E
M97E
M9E
M1E
27
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
100 cc Variable Displacement Pump
M: Control GroupOrder Date Code Qty. perCode Item Begin → End Part Number Description Model/Kit
KP M11 87-02 → 8800923 Control gasket 1M1E 87-02 → KVEAB104 EDC, weather pack connector 1M9E 87-02 → MCV116F4204 PCP type 3 oil filled 1
M95E 87-02 → 9004104-0120 O-ring 2M96E 87-02 → 9004104-0140 O-ring 1M97E 87-02 → 9004104-0240 O-ring 1M98E 87-02 → 9007315-0504 Screw 4M90E 87-02 → 9007314-0611 Screw 6
MA M 87-02 → 8102M0MA-A MDC kit w/o neutral start 1M11 87-02 → 8800923 Control gasket 1M1M 87-02 → 8800630 MDC w/o neutral start switch 1M7M 87-02 → 9800916 Control handle 1
M71M 87-02 → 9009660-3100 Washer 1M72M 87-02 → 9003513-0800 Nut 1M90M 87-02 → 9007314-0611 Screw 6
MB M 87-02 → 8102M0MB-A MDC kit with neutral start 1M11 87-02 → 8800923 Control gasket 1M1M 87-02 → 8800631 MDC with neutral start switch 1M7M 87-02 → 9800916 Control handle 1
M71M 87-02 → 9009660-3100 Washer 1M72M 87-02 → 9003513-0800 Nut 1M90M 87-02 → 9007314-0611 Screw 6
S40 87-02 → 80020S40 Neutral start switch kit 1
MC M 87-02 → 8102M0MC-A MDC kit w/sol. valve 1M11 87-02 → 8800923 Control gasket 1M1M 87-02 → 8800633 MDC with solenoid valve 1M7M 87-02 → 9800916 Control handle 1
M71M 87-02 → 9009660-3100 Washer 1M72M 87-02 → 9003513-0800 Nut 1M75M 95-10→ 505022 Control manifold (SB-9503) 1M76M 87-02 → 9700803 Solenoid valve, 12v, double screw 1M77M 87-02 → 8800882 Manifold gasket 1M78M 95-10 → 9007314-0606 Screw (SB-9503) 2
" 87-02 → 95-09 9007314-0605 Screw 2M90M 87-02 → 9007314-0611 Screw 6
Bold Items indicate recommended parts to be stocked for servicing
28
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
Control
M11
Enlarged bold type item numbers
are Recommended parts to be
stocked for servicing.
S40
M7M
M72M
M71M
M76M
M75M
M78M
M77M
M92M
M98MM95M
M97M
M96M
M9M
M
M90M
M1M
29
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
100 cc Variable Displacement Pump
M: Control Group
Order Date Code Qty. perCode Item Begin → End Part Number Description Model/KitMD M 87-02 → 8102M0MD-A MDC w/12v sol. valve, nss 1
M11 87-02 → 8800923 Control gasket 1M1M 87-02 → 8800632 MDC with sol. valve, nss 1M7M 87-02 → 9800916 Control handle 1
M71M 87-02 → 9009660-3100 Washer 1M72M 87-02 → 9003513-0800 Nut 1M75M 95-10→ 505022 Control manifold (SB-9503) 1M76M 87-02 → 9700886 Solenoid valve, 12v 1M77M 87-02 → 8800882 Manifold gasket 1M78M 95-10 → 9007314-0606 Screw (SB-9503) 2
" 87-02 → 95-09 9007314-0605 Screw 2M90M 87-02 → 9007314-0611 Screw 6
S40 87-02 → 80020S40 Neutral start switch kit 1
ME M 87-02 → 8102M0ME-A MDC w/2 position sol. valve 1M11 87-02 → 8800923 Control gasket 1M1M 87-02 → 347740 MDC with 2 position sol. valve 1M7M 87-02 → 9800916 Control handle 1M9M 87-02 → 8510107 Solenoid valve, 12v (SB-9510) 1
M71M 87-02 → 9009660-3100 Washer 1M72M 87-02 → 9003513-0800 Nut 1M90M 87-02 → 9007314-0611 Screw 6M92M 95-24 → 9007315-0507 Screw (SB-9510) 4M92M 87-02 → 95-23 9007315-0510 Screw 4M95M 87-02 → 9004105-0140 O-ring 1M96M 87-02 → 9004105-0140 O-ring 1M97M 87-02 → 9004105-0190 O-ring 1M98M 87-02 → 9007315-0505 Metric screw 4
MK M 87-02 → 8102M0MK-A MDC kit, wide deadband, nss 1M11 87-02 → 8800923 Control gasket 1M1M 87-02 → 8800634 MDC, wide deadband, nss 1M7M 87-02 → 9800916 Control handle 1
M71M 87-02 → 9009660-3100 Washer 1M72M 87-02 → 9003513-0800 Nut 1M90M 87-02 → 9007314-0611 Screw 6
S40 87-02 → 80020S40 Neutral start switch kit 1
ML M1 87-02 → 8800813 MDC, high force nss 1M11 87-02 → 8800923 Control gasket 1M7M 87-02 → 9800916 Control handle 1
M71M 87-02 → 9009660-3100 Washer 1M72M 87-02 → 9003513-0800 Nut 1M90M 87-02 → 9007314-0611 Screw 6
S40 87-02 → 8510027 Neutral start switch kit 1
Bold Items indicate recommended parts to be stocked for servicing
30
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
Control
M11
Enlarged bold type item numbers
are Recommended parts to be
stocked for servicing.
S40
M7M
M72M
M71M
M76M
M75M
M78M
M77M
M
M1M
M90M
31
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
100 cc Variable Displacement Pump
M: Control Group
Order Date Code Qty. perCode Item Begin → End Part Number Description Model/KitMS M1 87-02 → 8800864 MDC, high force nss 1
M11 87-02 → 8800923 Control gasket 1M7M 87-02 → 9800916 Control handle 1
M71M 87-02 → 9009660-3100 Washer 1M72M 87-02 → 9003513-0800 Nut 1M90M 87-02 → 9007314-0611 Screw 6
S40 87-02 → 8510027 Neutral start switch kit 1
MT M1 95-19 → 8800919 MDC, 12v override 1M11 95-19 → 8800923 Control gasket 1M7M 95-19 → 9800916 Control handle 1
M71M 95-19 → 9009660-3100 Washer 1M72M 95-19 → 9003513-0800 Nut 1M75M 95-19 → 505022 Control manifold 1M76M 95-19 → 9700886 Solenoid valve, 12v 1M77M 95-19 → 8800882 Manifold gasket 1M78M 95-19 → 9007314-0606 Screw 2M90M 95-19 → 9007314-0611 Screw 6
MU M1 87-02 → 8800870 MDC, 12v override, nss 1M11 87-02 → 8800923 Control gasket 1M7M 87-02 → 9800916 Control handle 1
M71M 87-02 → 9009660-3100 Washer 1M72M 87-02 → 9003513-0800 Nut 1M75M 95-10→ 505022 Control manifold (SB-9503) 1M76M 87-02 → 9700886 Solenoid valve, 12v 1M77M 87-02 → 8800882 Manifold gasket 1M78M 95-10 → 9007314-0606 Screw (SB-9503) 2
" 87-02 → 95-09 9007314-0605 Screw 2M90M 87-02 → 9007314-0611 Screw 6
S40 87-02 → 8700115 Neutral start switch only 1
MV M1 87-02 → 8800845 MDC, 12v override, nss 1M11 87-02 → 8800923 Control gasket 1M7M 87-02 → 9800916 Control handle 1
M71M 87-02 → 9009660-3100 Washer 1M72M 87-02 → 9003513-0800 Nut 1M90M 87-02 → 9007314-0611 Screw 6
S40 87-02 → 8700115 Neutral start switch only 1
Bold Items indicate recommended parts to be stocked for servicing
32
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
Filtration
N15
N00M
N25MN20M
N10MN35M
N40P
N40L
N15
N00R
N25RN20R
N10RN35R
N35S
N10S
Enlarged bold type item numbers
are Recommended parts to be
stocked for servicing.
33
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
100 cc Variable Displacement Pump
N: Filtration Group
Order Date Code Qty. perCode Item Begin → End Part Number Description Model/Kit
L N00M 87-02 → 8002N00M-A Filtration manifold kit 1N10M 87-02 → 8800896 Manifold (SB-9436) 1
N15 87-02 → 9004201-9000 O-ring 1N20M 95-18 → 5000222 Nut (SB-9436) 1N20M 87-02 → 95-17 9002863-1600 Nut 1N25M 87-02 → 8800180 Tube 1N35M 87-02 → 9005100-5600 Plug 2N40L 87-02 → 8700068 Filter, long 1
M N00M 87-02 → 8002N00M-A Filtration manifold kit 1N10M 87-02 → 8800896 Manifold (SB-9436) 1
N15 87-02 → 9004201-9000 O-ring 1N20M 95-18 → 5000222 Nut (SB-9436) 1N20M 87-02 → 95-17 9002863-1600 Nut 1N25M 87-02 → 8800180 Tube 1N35M 87-02 → 9005100-5600 Plug 2
P N00M 87-02 → 8002N00M-A Filtration manifold kit 1N10M 87-02 → 8800896 Manifold (SB-9436) 1
N15 87-02 → 9004201-9000 O-ring 1N20M 95-18 → 5000222 Nut (SB-9436) 1N20M 87-02 → 95-17 9002863-1600 Nut 1N25M 87-02 → 8800180 Tube 1N35M 87-02 → 9005100-5600 Plug 2N40P 87-02 → 9700810 Filter, short 1
R N00R 87-02 → 8002N00R-A Filtration manifold kit (SB-8824) 1N10R 87-02 → 350777 Manifold (SB-8824) 1
N15 87-02 → 9004201-9000 O-ring 1N20R 87-02 → 9002863-1600 Nut 1N25R 87-02 → 8800210 Tube 1N35R 87-02 → 9005100-5600 Plug 1
S N10S 87-02 → 5000230 Reducer fitting 1N35S 87-02 → 9005110-5600 Plug 1
Bold Items indicate recommended parts to be stocked for servicing
34
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
High Pressure Regulation
END CAP GASKET FACE
With Pressure Limiters
P80
P70
P80
P70
P2B1
P6P13
P2A1P6
P13
Enlarged bold type item numbers
are Recommended parts to be
stocked for servicing.
P2B1
P6P13
P2A1
P6P13
Side Port End Cap
Twin Port End Cap
P802
P702
END CAP GASKET FACE
Without Pressure LimitersLeft/Right Hand RotationLeft Hand Rotation Right Hand Rotation
35
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
100 cc Variable Displacement Pump
P: High Pressure Regulation Group
Order Date Code Qty. perCode Item Begin → End Part Number Description Model/Kit
1 P2A1 87-02 → 8510022-1 Multi-function valve kit (w/PL) 1 (Range 1) P2B1 87-02 → 8510022-1 Multi-function valve kit 1
P6 87-02 → 9004100-0200 O-ring 2P13 87-02 → 9004105-0190 O-ring 2P70 87-02 → 8800188 Check valve 2P80 87-02 → 9005475-0004 Special plug 2
2 P2A1 87-02 → 8510022-2 Multi-function valve kit (w/o PL) 1(Range 1) P2B1 87-02 → 8510022-2 Multi-function valve kit 1
P6 87-02 → 9004100-0200 O-ring 2P13 87-02 → 9004105-0190 O-ring 2
P702 87-02 → 9005110-4400 Plug 1P802 87-02 → 9005475-0004 Special plug 3
6 P2A1 87-02 → 8510022-6 Multi-function valve kit (w/PL) 1(Range 2) P2B1 87-02 → 8510022-6 Multi-function valve kit 1
P6 87-02 → 9004100-0200 O-ring 2P13 87-02 → 9004105-0190 O-ring 2P70 87-02 → 8800188 Check valve 2P80 87-02 → 9005475-0004 Special plug 2
7 P2A1 87-02 → 8510022-7 Multi-function valve kit (w/o PL) 1(Range 2) P2B1 87-02 → 8510022-7 Multi-function valve kit 1
P6 87-02 → 9004100-0200 O-ring 2P13 87-02 → 9004105-0190 O-ring 2
P702 87-02 → 9005110-4400 Plug 1P802 87-02 → 9005475-0004 Special plug 3
Bold Items indicate recommended parts to be stocked for servicing
36
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
Orifice
T001
T301
T401
Installed in Control Housing
37
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
100 cc Variable Displacement Pump
T: Orifice Group
Order Date Code Qty. perCode Item Begin → End Part Number Description Model/Kit
01 T001 87-02 → 8002T001-A Control orifice kit - .018 1T301 87-02 → 8700007 Spring 1T401 87-02 → 8800340 Spring retainer 1
02 T001 87-02 → 8002T002-A Control orifice kit - .026 1T301 87-02 → 8700007 Spring 1T401 87-02 → 8800340 Spring retainer 1
03 T001 87-02 → 8002T003-A Control orifice kit - .032 1T301 87-02 → 8700007 Spring 1T401 87-02 → 8800340 Spring retainer 1
04 T001 87-02 → 8002T004-A Control orifice kit - .040 1T301 87-02 → 8700007 Spring 1T401 87-02 → 8800340 Spring retainer 1
05 T001 87-02 → 8002T005-A Control orifice kit - .054 1T301 87-02 → 8700007 Spring 1T401 87-02 → 8800340 Spring retainer 1
06 T001 87-02 → 8002T006-A Control orifice kit - .062 1T301 87-02 → 8700007 Spring 1T401 87-02 → 8800340 Spring retainer 1
09 T001 87-02 → 8002T009-A Control orifice kit - .092 1T301 87-02 → 8700007 Spring 1T401 87-02 → 8800340 Spring retainer 1
22 T001 87-02 → 8002T022-A Control orifice kit - .022 1T301 87-02 → 8700007 Spring 1T401 87-02 → 8800340 Spring retainer 1
38
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
Installed in Control Housing
T001
T301T401T821
T721
T521
T621
Orifice
39
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
T: Orifice Group
Order Date Code Qty. perCode Item Begin → End Part Number Description Model/Kit
28 T001 87-02 → 8002T002-A Control orifice kit - .026 1T301 87-02 → 8700007 Spring 1T401 87-02 → 8800340 Spring retainer 1T521 87-02 → 639104 Orifice plug, .7mm M5 x 6 1T621 87-02 → 639104 Orifice plug, .7mm M5 x 6 1T721 87-02 → 704650 Orifice plug, .7mm M8 x 8 1T821 87-02 → 704650 Orifice plug, .7mm M8 x 8 1
29 T001 91-30 → 8002T003-A Control orifice kit - .032 1T301 91-30 → 8700007 Spring 1T401 91-30 → 8800340 Spring retainer 1T521 91-30 → 639104 Orifice plug, .7mm, M5 x 6 1T621 91-30 → 639104 Orifice plug, .7mm, M5 x 6 1
35 T001 91-30 → 8002T003-A Control orifice kit - .032 1T301 91-30 → 8700007 Spring 1T401 91-30 → 8800340 Spring retainer 1T521 91-30 → 598292 Orifice plug, .8mm, M5 x 6 1T621 91-30 → 598292 Orifice plug, .8mm, M5 x 6 1T721 87-02 → 714477 Orifice plug, .8mm M8 x 8 1T821 87-02 → 714477 Orifice plug, .8mm M8 x 8 1
36 T001 91-30 → 8002T003-A Control orifice kit - .032 1T301 91-30 → 8700007 Spring 1T401 91-30 → 8800340 Spring retainer 1T721 87-02 → 704650 Orifice plug, .7mm M8 x 8 1T821 87-02 → 704650 Orifice plug, .7mm M8 x 8 1
50 T001 87-02 → 8002T002-A Control orifice kit - .026 1T301 87-02 → 8700007 Spring 1T401 87-02 → 8800340 Spring retainer 1T721 87-02 → 521054 Orifice plug, .9mm 1T821 87-02 → 521054 Orifice plug, .9mm M8 x 8 1
100 cc Variable Displacement Pump
40
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
Special Hardware Feature
E30
E80
E40
E22
E22
E60
E10
E50
E20
E30
E70
Enlarged bold type item numbers
are Recommended parts to be
stocked for servicing.
C80
C16
C15
C14
C13
C05
C70
C40
C50
C30
C20
S07
B83
B83
E82
E24
E80 E82
E24
C65
E90
41
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
100 cc Variable Displacement Pump
Order Date Code Qty. perCode Item Begin → End Part Number Description Model/Kit
S07 87-02 → 82020S07 Cylinder. block kit, welded (SB-9312) 1C05 87-02 → 8200124 Cylinder block assy, w/o speed ring 1C13 87-02 → 8200027 Spring seat 1C14 87-02 → 8200210 Cylinder block spring 1C15 87-02 → 8200028 Spring retainer 1C16 87-02 → 9006275-0026 Retaining ring 1C20 87-02 → 364000 Welded piston (SB-8823) 9C30 87-02 → 8200026 Slipper retainer 1C40 87-02 → 8200144 Slipper guide brg. (SB-8816) 1C50 87-02 → 8200216 Spacer (SB-8816) 4C65 87-02 → 9009625-0159 Washer (SB-8816) 4C70 87-02 → 9007276-0099 Screw 4
E10 95-50 → 501574 Side cover (SB-9525) 1“ 87-02 → 92-11 8200011 Side cover (SB-9203) 1
E20 87-02 → 8200007 Leveler (SB-8903) 1E22 87-02 → 358846 Spring Seat (SB-8903) 2E24 87-02 → 359059 Shim (SB-8903) 2E30 95-50 → 8000379 Guide post (SB-9525) 2
" 87-02 → 95-49 8100353 Guide post 2E40 87-02 → 9003509-0008 Nut 2E50 87-02 → 9004104-1620 O-ring 1E60 87-02 → 5000206 Screw (SB-9418) 6E70 87-02 → 9005110-9000 Plug 1E80 87-02 → 8200174 Spring 2E90 95-50 → 8200321 Insert assembly (SB-9525) 1
W: Special Hardware Features GroupCAA & HNP B83 87-02 → 9005110-5600 Plug 1
C05 87-02 → 8200124 Cylinder block assy, w/o speed ring 1C20 87-02 → 8200031 Hollow piston 9C80 87-02 → 8200041 Pump valve plate, -2 degree 1S07 87-02 → 82020S05 Cylinder Block kit, hollow pistons 1
EDB B83 87-02 → KPPB154 Speed sensor 1C05 87-02 → 8200277 Cylinder block assy.,w/speed ring 1C80 87-02 → 501327 Pump valve plate (SB-9515) 1
FAA & NDN B83 87-02 → 9005110-5600 Plug 1C05 87-02 → 8200124 Cylinder block assy, w/o speed ring 1C80 87-02 → 8200041 Pump valve plate, -2 degree 1E82 87-02 → 8200194 Spring 2
FAB & NBN B83 87-02 → 9005110-5600 Plug 1C05 87-02 → 8200124 Cylinder block assy, w/o speed ring 1C80 87-02 → 8200195 Pump valve plate, -3 degree 1E82 87-02 → 8200194 Spring 2
Bold Items indicate recommended parts to be stocked for servicing
42
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
Special Hardware Feature
E30
E80
E40
E22
E22
E60
E10
E50
E20
E30
E70
Enlarged bold type item numbers
are Recommended parts to be
stocked for servicing.
C80
C16
C15
C14
C13
C05
C70
C40
C50
C30
C20
S07
B83
B83
E82
E24
E80 E82
E24
C65
E90
43
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
100 cc Variable Displacement Pump
W: Special Hardware Features Group
Order Date Code Qty. perCode Item Begin → End Part Number Description Model/Kit
FAC & NMN B83 87-02 → 9005110-5600 Plug 1C05 87-02 → 8200124 Cylinder block assy, w/o speed ring 1C80 87-02 → 737478 Pump valve plate, 1.5 degree 1E82 87-02 → 8200194 Spring 2
FAD & NSN B83 87-02 → 9005110-5600 Plug 1C05 87-02 → 8200124 Cylinder block assy, w/o speed ring 1C80 87-02 → 501327 Pump valve plate (SB-9515) 1E82 87-02 → 8200194 Spring 2
GBA & NNN B83 87-02 → 9005110-5600 Plug 1C05 87-02 → 8200124 Cylinder block assy, w/o speed ring 1C80 87-02 → 501327 Pump valve plate (SB-9515) 1
KCA B83 87-02 → 9005110-5600 Plug 1C05 87-02 → 8200124 Cylinder block assy, w/o speed ring 1C80 87-02 → 8200041 Pump valve plate, -2 degree 1
No control screens ( Item B90, Common Parts, page 6-7)
Overhaul Seal KitS30 87-02 → 82020S30 Overhaul seal kit, 100 PV 1C70 87-02 → 9007276-0099 Screw 4E40 87-02 → 9003509-0008 Nut 2E50 87-02 → 9004104-1620 O-ring 1E60 87-02 → 5000206 Screw (SB-9418) 6F11 87-02 → 9004100-1310 O-ring 2F12 87-02 → 8700067 Piston ring 2F40 87-02 → 9004104-0350 O-ring 2F50 87-02 → 9004104-0340 O-ring 2
G301 87-02 → 8200212 End cap gasket (SB-9203) 1J40 87-02 → 92-29 9004104-0440 O-ring 1J50 87-02 → 9004104-1580 O-ring 1J90 87-02 → 9004100-0420 O-ring 1J90 87-02 → 9004104-0440 O-ring 1J90 87-02 → 9004100-0480 O-ring 1K50 87-02 → 9004201-6200 O-ring (SB-8902) 1L40 87-02 → 9008000-0114 Lip seal 1L50 87-02 → 9004104-1540 O-ring 1M11 87-02 → 8800274 Control gasket 1M11 87-02 → K11420 Control gasket (SB-9302) 1M77 87-02 → 8800882 Manifold gasket 1
M95E 87-02 → 9004104-0120 O-ring 2M96E 87-02 → 9004104-0140 O-ring 1M97E 87-02 → 9004104-0240 O-ring 1
N15 87-02 → 9004201-9000 O-ring 1P6 87-02 → 9004100-0200 O-ring 2
P13 87-02 → 9004105-0190 O-ring 2
Bold Items indicate recommended parts to be stocked for servicing
44
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
To improve efficiency and reliability, the number of parts in Series 90 pumps
is being reduced. The charge pump design on 55cc thru 130cc frame sizes
is being changed so that the outer port plate is an integral part of the charge
pump cover and distance plates are eliminated. The change is taking effect
at the following manufacturing dates:
55cc: 93-10 75cc: 93-10 100cc: 93-15 130cc: 93-34
For auxiliary pad options, the new charge pump cover is rotation dependent.
The cover will be marked as either left hand (L) or right hand (R). The non-
axiliary pad cover is not rotation dependent.
The charge pump shaft also changes and must be replaced when using the
new style hardware. The complete charge assembly can be interchanged
with corresponding hardware from 89-17 and beyond. However, piece
parts are not interchangeable. For units prior to 89-17, consult Sauer-
Sundstrand.
The old design charge pump hardware is obsolete and is no longer available.
Refer to the chart on the reverse side of this page to determine the
replacement kit.
BLN-10107 Rev. B
Charge Pump Design Change
45
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
1. Unit size (055, 075, 100 or 130 cc)2. Charge pump displacement (11, 14, 17, 20, 26 or 34 cc)3. Auxilary pad (Yes or No)4. Rotation (LH or RH)
The following information must be known to determine the correctcharge pump replacement kit:
BLN-10107 Rev. B
Auxilarypad
Chg. pumpdisplace-
mentUnit Size Rotation
ReplacementKit
LH or RHLHRH
NoYesYes
851002885100298510030
NoYesYes
LH or RHLHRH
851003185100328510033
11 cc055
14 cc055
880051388005148800514880051388005148800514
8000174
8000174
8000169
8000170
NoYesYes
LH or RHLHRH
851003485100358510036
17 cc055880051388005148800514
80001748000171
CoverShaftGear Set
Obsoleted Charge Pump Parts
LH or RHLHRH
NoYesYes
851003785100388510039
NoYesYes
LH or RHLHRH
851004085100418510042
14 cc075
17 cc075
880051388005148800514880051388005148800514
337956
337956
8100313
8100314
NoYesYes
LH or RHLHRH
851004385100448510045
20 cc075880051388005148800514
3379568100315
LH or RHLHRH
NoYesYes
851004685100478510048
NoYesYes
LH or RHLHRH
851004985100508510051
17 cc100
20 cc100
880051388005148800514880051388005148800514
337956
337956
8200158
8200159
NoYesYes
LH or RHLHRH
851005285100538510054
26 cc100880051388005148800514
3379568200160
347518347526347526
LH or RHLHRH
NoYesYes
851006485100658510066
NoYesYes
LH or RHLHRH
851006785100688510069
20 cc130
26 cc130
347518347526347526347518347526347526
303636
303636
714444
714451
NoYesYes
LH or RHLHRH
851007085100718510072
34 cc130303636714469
46
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
Service Bulletin SB-8809
DESCRIPTION:
PRODUCTS AFFECTED: Series 90 PumpsSUBJECT: Servo Arm Change
As a product improvement, Sauer-Sundstrand has changed the Series 90 Pump servo armand swashplate (items D10 and D50). The old style servo arm and swashplate will becomeobsolete. Because this change creates non-interchangeability between new and oldswashplates, servo arms, and possibly servo pistons (item S10) and slider blocks (itemF20), separate servo arms and swashplates will no longer be sold as spare parts.
Also, the new servo arm is actually a press fit into a groove in the new swashplate. Thissituation requires special tooling for assembly, therefore, pre-assembled kits will be createdfor 55, 75, and 100 cc pumps. The kits will work in any vintage pump.
The kit for 55 cc pumps will include all the items in the figure, except item S10.
The kit for 75 cc pumps will include all the items in the figure.
The kit for 100 cc pumps will include all the items in the figure, except items S10 and F20.
NOTE: The slider block (item F20) in 55 cc pumps and the slider block and the servo piston(item S10) in 75 cc pumps had to be changed slightly to allow clearance for the newservo arm. The new part number servo piston and slider blocks will work in anyvintage pump.
D55
D10
F20
D60
D65
D70
D50
D75
F12 F11
S10
F11
F12
47
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
Service Bulletin SB-8809
X
X
PARTS DISPOSITION:
Not Applicable
Interchangeable
Non-Interchangeable
Use Parts in Stock
Scrap Used Parts
Return New Parts for Credit
Order Replacement Parts
Rework Parts in Stock
Revise Existing Part Orders
Scrap New Parts and Supply for Credit
New 55 cc Slider Block is P/N 8000189.New 75 cc Slider Block is P/N 8100368.New 100 cc Slider Block is P/N 8100369.New 55 cc Servo Arm / Swashplate Kit is P/N 8000201.New 75 cc Servo Arm / Swashplate Kit is P/N 8100377.New 100 cc Servo Arm / Swashplate Kit is P/N 8200192.
PART NUMBERS AFFECTED:
SERIAL NUMBERS AFFECTED:
Change goes into effect with S/N 88-14-XXXXX on 55 cc Pumpsand with S/N 88-16-XXXXX for 75 cc and 100 cc Pumps.
MODELS AFFECTED:
All 94-2XXX (55 cc Pumps), 95-2XXX (75 cc Pumps), and96-2XXX (100 cc Pumps)
X
X
DISTRIBUTION:
All Product Related Sauer-Sundstrand Distributors
All Product Related OEM's
All ASCs
Non-Restricted DistributionX
X
48
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
Service Bulletin SB-8816
DESCRIPTION:
PRODUCTS AFFECTED: Series 90 PumpsSUBJECT: Change in Fixed Slipper Hold Down
As a product improvement, Sauer-Sundstrand has simplified the design of the Series 90 Pumpslipper hold-down mechanism. The hold-down changes from spring loaded with a fixedmaximum clearance to a fixed clearance design.
The leaf spring (item C60) and spring aligner (item C66) will be eliminated and will not beavailable as spare parts.
The spacer (item C50), bearing (item C40), and washer (item C65) will change and the old partnumbers will not be available as spare parts.
The swashplate (item D50), pistons (item C20), slipper retainer (item C30), and screws (itemC70) will remain the same.
If any of the affected parts (items C66, C60, C65, C50, or C40) require replacement duringrepair of older style pumps, discard these parts and rebuild using new style parts (items C40,C50, and C65). As before, the screws (item C70) which are coated with locking compoundMUST always be replaced after removal.
New StyleSlipper Hold-Down
49
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
Service Bulletin SB-8816
X
X
PARTS DISPOSITION:
Not Applicable
Interchangeable
Non-Interchangeable -
Use Parts in Stock
Scrap Used Parts
Return New Parts for Credit
Order Replacement Parts
Rework Parts in Stock
Revise Existing Part Orders
Scrap New Parts and Supply for Credit
MODELS AFFECTED:
DISTRIBUTION:
All Product Related Sauer-Sundstrand Distributors
All Product Related OEM's
All ASCs
Non-Restricted DistributionX
X
X as individual parts, but new style C40, C50 and C65 can beused in any vintage pump if all three (3) parts are used.
All 94-2xxx (55 cc Pumps), 95-2xxx (75 cc Pumps), and96-2xxx (100 cc Pumps)
SERIAL NUMBERS AFFECTED:
55 cc Pumps, 94-2xxx, Changed at S/N 88-43-xxxxx75 cc Pumps, 95-2xxx, Changed at S/N 88-22-xxxxx100 cc Pumps, 96-2xxx, Changed at S/N 88-20-xxxxx
PART NUMBERS AFFECTED:
Part numbers for the obsoleted parts can be found in the Series 90 Service PartsManual, BLN-2-41528/9. New style part numbers are as follows:
Part NumbersItem Qty / Pump 55 cc 75 cc 100 ccC40 2 8000137 8100294 8200144C50 4 8000138 8100295 8200145C65 4 9009625-0159 9009625-0159 9009625-0159C70 4 9007276-0114 9007276-0099 9007276-0099
50
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
OR
W = WeldedH = Hollow
W
W
W
H
H H
H
HH
W
W
W
H
H
H
W
W
W
Service Bulletin SB-8823PRODUCTS AFFECTED: Series 90 Pumps and MotorsSUBJECT: Piston Improvement
DESCRIPTION:
Product Information Bulletin PIB-8801 (March, 1988) announced the incorporation offabricated (welded) piston assemblies, replacing non-fabricated (hollow) piston assemblies,in the cylinder blocks of all Series 90 pumps and motors. This change increases the overallefficiency of the Series 90 product line.
To simplify service parts inventory for all Series 90 units, only individual welded pistonassemblies will be available as service parts. The hollow pistons will be obsoleted. Partnumbers for INDIVIDUAL welded piston assembies are listed on the back side of thisbulletin.
Since all Series 90 pumps and motors have nine (9) pistons, welded pistons being used toreplace hollow pistons during repair MUST be installed in the cylinder block symmetrically,in multiples of three (3).
Welded PistonAssembly
Hollow PistonAssembly
When replacing hollow pistons with welded pistons, it is mandatory that the weldedpistons be incorporated symmetrically in multiples of three (3).
51
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
MODELS AFFECTED:All Series 90 Pumps and Motors
93-XXXX94-XXXX95-XXXX96-XXXX
PART NUMBERS AFFECTED:
PART NUMBER DESCRIPTION706101 Piston Assembly, Welded-42 cc367672 Piston Assembly, Welded-55 cc708230 Piston Assembly, Welded-75 cc364000 Piston Assembly, Welded-100 cc
SERIAL NUMBERS AFFECTED:
Welded pistons will be incorporated into all Series 90 pumps and motors by the endof the first quarter of 1989.
Service Bulletin SB-8823
X
PARTS DISPOSITION:
Not Applicable
Interchangeable (in groups of 3)
Non-Interchangeable
Use Parts in Stock
Scrap Used Parts
Return New Parts for Credit
Order Replacement Parts
Rework Parts in Stock
Revise Existing Part Orders
Scrap New Parts and Supply for Credit
DISTRIBUTION:
All Product Related Sauer-Sundstrand Distributors
All Product Related OEM's
All ASCs
Non-Restricted Distribution
X
X
XX
52
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
Service Bulletin SB-8824 Rev. A
NOTICE
The initial issue of this bulletin (dated 12/19/88) did not include an incorporation date. This revisionis being distributed to inform all users of the exact incorporation date. You may remove the initialissue of this bulletin from your files.
DESCRIPTIONThe configuration of the Remote Pressure Filtration Adapter, available as an option on Sauer-Sundstrand Series 90 Variable Pumps (55, 75, and 100 cc) is changing. This improved designadapter incorporates a charge pressure test port. In addition, the remote filter connections havebeen relocated to improve the customer interface and the routing for filter plumbing on mostapplications. Port sizes did not change. (A version of the improved design adapter is already beingused on Series 90 42 cc Variable Pumps.)This change does not affect the pump end cap, and either design filtration adapter can be used onany vintage pump. Only the new style adapter will be available as spare parts or on new productionpumps.The outline dimensional differences between the new and old adapters are shown below.
New Style Old Style
DESCRIPTION:
PRODUCTS AFFECTED: Series 90 PumpsSUBJECT: Remote Pressure Filtration Adapter Change
53
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
Service Bulletin SB-8824 Rev. A
X
X
PARTS DISPOSITION:
Not Applicable
Interchangeable
Non-Interchangeable
Use Parts in Stock
Scrap Used Parts
Return New Parts for Credit
Order Replacement Parts
Rework Parts in Stock
Revise Existing Part Orders
Scrap New Parts and Supply for Credit
X
DISTRIBUTION:
All Product Related Sauer-Sundstrand Distributors
All Product Related OEM's
All ASCs
Non-Restricted Distribution
MODELS AFFECTED:
All Series 90 pumps (93-2xxx, 94-2xxx, 95-2xxx, 96-2xxx) with Remote Pressure Filtra-tion (Option R).
SERIAL NUMBERS AFFECTED:
Remote pressure filtration equipped pumps shipped after April 24, 1989, or with serialnumber X-89-17-xxxxx and up will include the new design adapter.
PART NUMBERS AFFECTED:
Part Number Description8002N00R-A Filtration Remote - Kit ("New Style")
(changes to machine plumbing will probably be necessary)
54
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
Adjusting Charge Relief Valve Charge Relief Valve Assembly
As a product improvement, Sauer-Sundstrand is incorporating an externally adjustable chargerelief valve on all Series 90 variable displacement pumps. This design replaces the previous shimadjustable charge relief valve. The new design valve provides a range of pressure adjustmentwhich covers the available charge pressure options of 290, 348, and 406 psi (20, 24, and 28 bar).
NOTE This improvement changes the design of the charge relief valve poppet and plug. The newstyle charge relief valve may protrude from the pump end cap approximately 0.27 in. (6.9mm) farther than the shim adjustable design.
To adjust the new design valve, first install gauges to measure charge pressure and case pressureas described in the Series 90 Service Manual. Loosen the adjustment lock nut with a 1-1/16 in. hexwrench. Operate the pump at an input speed of 1700 to 2000 rpm and turn the adjustment nut witha large screwdriver while observing the charge pressure and case pressure. Clockwise (CW)rotation of the plug increases the setting, while counterclockwise (CCW) rotation decreases thesetting (at a rate of approximately 50 psi [3.4 bar] per turn). Charge pressure settings arereferenced to case pressure. Once the desired setting is achieved, torque the lock nut to 34 to 41lbsf•ft (46 to 55 Nm) and remove the gauges.
Sauer-Sundstrand will offer an adjustable charge relief valve kit for sale as a spare part. This kitcan be used to service any vintage Series 90 variable pump. Since the new and old style chargerelief valves are interchangeable as an assembly, the old style parts will be made obsolete and willno longer be available as spare parts.
DESCRIPTION:
PRODUCTS AFFECTED: Series 90 PumpsSUBJECT: Incorporation of Adjustable Charge Relief Valve
Service Bulletin SB-8902
55
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
PARTS DISPOSITION:
Not Applicable
Interchangeable
Non-Interchangeable
Use Parts in Stock
Scrap Used Parts
Return New Parts for Credit
Order Replacement Parts
Rework Parts in Stock
Revise Existing Part Orders
Scrap New Parts and Supply for Credit
DISTRIBUTION:
All Product Related Sauer-Sundstrand Distributors
All Product Related OEM's
All ASCs
Non-Restricted Distribution
X
X
X
X
PART NUMBERS AFFECTED:
Part Number Description8002K000-A Adjustable Charge Relief Valve Kit - "New Style"
(Includes poppet, spring, plug, O-ring, and lock nut)
(as an assembly)
MODELS AFFECTED:
All Series 90 Pumps (93-2xxx, 94-2xxx, 95-2xxx, and 96-2xxx)
Service Bulletin SB-8902
SERIAL NUMBERS AFFECTED:
Due to the interchangeability of the charge relief valve assemblies, this is a runningchange. It will be incorporated into all Series 90 variable pumps by March of 1989.
56
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
Service Bulletin SB-8903
P80
P70
E80
E80
E22E20
E22
E24
E24
End Cap
DESCRIPTION:
PRODUCTS AFFECTED: Series 90 PumpsSUBJECT: Swashplate Leveler Spring Seat Change
and Servo Pressure Relief Valves
As a product improvement, Sauer-Sundstrand is adding hardened shims between theswashplate leveler springs and the end cap in Series 90 variable displacement pumps. Inaddition, the leveler spring seats have been hardened, and are now separate pieces fromthe leveler. Previously, the seats were peened to the leveler.
These improvements requier some minor changes in the repair procedures for the Series90 pumps. When installing the leveler springs (item E80), take care that the spring seats(item E22) are in position on the swashplate leveler. Before installing the end cap, assemblethe hardened shims (item E24) into their poskets in the end cap and retain with petroleumjelly.
The swashplate leveler, plus the separate spring seats, is directly interchangeable with theold design part. When performing major repairs on any Series 90 pump, the hardened shimsshould be installed between the leveler springs and the end cap.
In an unrelated change, the servo pressure check (relief) valves (item P70) installed in thepump end cap (or rotation valve housing) were replaced by standard internal hex, straightthread O-ring plugs in some pumps. The servo pressure check (relief) valves MUST beinstalled in pumps equipped with pressure limiters in order to provide maximum end capgasket life.
57
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
PART NUMBERS AFFECTED:
Part NumbersItem Desc. Qty /Pump 42 cc 55 cc 75 cc 100 cc
E20 Leveler 1 673897 8000094 8100130 8200007
E22 Spring Seat 2 358820 358838 358523 358846
E24 Shim 2 359034 359042 359042 359059
DISTRIBUTION:
All Product Related Sauer-Sundstrand Distributors
All Product Related OEM's
All ASCs
Non-Restricted Distribution
X
X
X
X
SERIAL NUMBERS AFFECTED:
The hardened swashplate leveler spring seats and hardened shims between theleveler springs and end cap will be incorporated into Series 90 pumps at SerialNumber 89-09-xxxxx.
MODELS AFFECTED:
All 93-2xxx (42 cc Pumps), 94-2xxx (55 cc Pumps), 95-2xxx (75 cc Pumps),and 96-2xxx (100 cc Pumps)
Service Bulletin SB-8903
PARTS DISPOSITION:
Not Applicable
Interchangeable
Non-Interchangeable
Use Parts in Stock
Scrap Used Parts
Return New Parts for Credit
Order Replacement Parts
Rework Parts in Stock
Revise Existing Part Orders
Scrap New Parts and Supply for Credit
58
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
Service Bulletin SB-8906
Outer Port Plate H30Outer Port Plate H30
Gerotor and Gerotor RingInner Port Plate (H31)
Pin H40Shaft H50
Drive Key H60
Inner Port Plate (H30)Gerotor and Gerotor Ring
Spacer
2nd Spacer (used only with 17 cc/rev
for 100 cc pump)
Pin H40Shaft H50
Drive Key H60
Charge Pump Cover J15
O-Ring J40NCharge Pump Cover J15
Journal Bearing J30
Note beveled end
Journal Bearing J30
O-Ring J40N
Note square end
New charge pump shaft for 75 cc and
100 cc pumps
Old charge pump shaft
75 cc keyway
Identifying groove for 75 cc keyway
100 cc keyway
DESCRIPTION:
The original design Series 90 charge pump assembly included two (2) port plates, one (1)on each side of the gerotor. If the charge pump displacement was less than the maximumavailable for the pump’s frame size, the inside port plate was thicker than the 0.050 in. (1.27mm) outside port plate.
The new design charge pump will always have two (2) 0.050 in. (1.27 mm) thickness portplates, one (1) on each side of the gerotor. Additionally, if the charge pump displacementis less than the maximum available for the pump’s frame size, one (1) or two (2) spacerswill be installed between the outside port plate and the charge pump cover.
In addition, the location of the keyway in the charge pump shaft has also been changed toensure full engagement of the drive key in the gerotor. The new charge pump shaft usedin 75 cc and 100 cc frame size pumps has two (2) keyways. The rear keyway (farthest fromthe end cap and splined end of the shaft) is used for 75 cc pumps, while the front keyway(closest to the end cap and splined end of the shaft) is used for 100 cc pumps. The new stylecharge pump shafts for 55, 75, and 100 cc pumps also changed from having a beveled endto a square end on the end of the shaft closest to the pump end cap.
PRODUCTS AFFECTED: Series 90 PumpsSUBJECT: Charge Pump Design Changes
59
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
Service Bulletin SB-8906
DISTRIBUTION:
All Product Related Sauer-Sundstrand Distributors
All Product Related OEM's
All ASCs
Non-Restricted DistributionX
X
X
PARTS DISPOSITION:
Not Applicable
Interchangeable
Non-Interchangeable
Use Parts in Stock
Scrap Used Parts
Return New Parts for Credit
Order Replacement Parts
Rework Parts in Stock
Revise Existing Part Orders
Scrap New Parts and Supply for Credit
MODELS AFFECTED:All 94-2xxx (55 cc Pumps), 95-2xxx (75 cc Pumps), and 96-2xxx (100 cc Pumps)
Proper part number versus pump serial number information can be found in the May, 1989, issue of theSeries 90 Service Parts Manual, BLN-2-41528/9.
The thicker inside port plates (thicker than 0.050 in. [1.27 mm]) will be obsoleted, and will NOT be avail-able as spare parts. If these parts require replacement, use the 0.050 in. (1.27 mm) port plate and appro-priate spacer(s) as spares. On 100 cc pumps only, the new charge pump shaft MUST be used if the newstyle spacer is used.
On 55 and 75 cc pumps, the charge pump shaft clearance pocket in the end cap changed from a beveledto a straight (90°) corner to correspond with the change in the charge pump shaft. Old style charge pumpshafts will remain available as spare parts and MUST be used in the 55 cc and 75 cc beveled pocket endcaps.
Old style (beveled pocket) end caps will be obsoleted and will NOT be available as spare parts. If an oldstyle end cap needs replacement, new style end caps can be used with any vintage charge pump hard-ware and charge pump shaft.
PART NUMBERS AFFECTED:
SERIAL NUMBERS AFFECTED:The new charge pump design will be incorporated into Series 90 pumps at the followingSerial Numbers:A-89-17-xxxxx for all pumps manufactured in Ames, Iowa, U.S.A.N-89-07-xxxxx for all 95-2xxx (75 cc) pumps manufactured in Neumünster, Germany.N-88-48-xxxxx for all 96-2xxx (100 cc) pumps manufactured in Neumünster, Germany.
X (Must use correct charge pump shaft per Serial Number of pump)
60
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
Service Bulletin SB-8923 Rev. A
PRODUCTS AFFECTED: Series 90 100cc Variable PumpsSUBJECT: Reduction in Overall Length
DESCRIPTION:
This Bulletin was issued in September, 1989 for advanced information. The purposeof this revision 'A' is for exact serial number incorportation only.
To improve application flexibility, the overall length of Series 90 100cc pumps will bereduced by .39" (10mm). Some port locations will also change.
Shown below are all dimensional differences between the current and new design pumps.
61
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
DISTRIBUTION:
All Product Related Sauer-Sundstrand Distributors
All Product Related OEM's
All ASCs
Non-Restricted DistributionX
X
X
Service Bulletin SB-8923 Rev. AMODELS AFFECTED: All 96-2xxx pumps
SERIAL NUMBERS AFFECTED:This change will take place in late November, 1989 with s/n A-89-46-xxxxx.
PART NUMBERS AFFECTED:Non-interchangeability will exist with drive shafts, which become shorter with this change, end caps, endcap gaskets, and the end cap to the variable housing retaining screws. Old style end caps will no longerbe available as spare parts. In the rare event that a new end cap is required, a new shaft, end cap gasket,and screws will also be needed. Part number for current parts can be found in the Series 90 Service PartsManual (BLN-2-41528/9, May 1989). The new part numbers are as follows:
X
PARTS DISPOSITION:
Not Applicable
Interchangeable
Non-Interchangeable
Use Parts in Stock
Scrap Used Parts
Return New Parts for Credit
Order Replacement Parts
Rework Parts in Stock
Revise Existing Part Orders
Scrap New Parts and Supply for Credit
Item* Part Number Description Qty.G046G306G906G956J80AJ80BJ80CJ80NL1C7L1F1L1S1L1TFL1T2L1K3
820017582001669007210-06089007210-06089007314-16239007314-16239007314-16239007210-1621820016982001708200171820017982001738200176
End cap - AxialGasketScrewScrewScrewScrewScrewScrewShaft -23 t.Shaft - 13 t.Shaft - 14 t.Shaft - Tapered splineShaft - TaperedShaft - Straight Key
11114444111111
* From the Series 90 Service Parts Manual, BLN-2-41528/9
62
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
Service Bulletin SB-9203 Rev. A
PRODUCTS AFFECTED: Series 90: 55,75,100, 130 cc PumpsSUBJECT: Block Point Change: Components Redesign
DESCRIPTION:
As part of our overall Series 90 product improvement program, numerous components arebeing redesigned. This redesign is referred to as a “blockpoint” change. The objective of theblockpoint change is to minimize the number of times we change the units while we convert to highvolume tooling at various plant sites. These design improvements will provide increased reliabilityand more application flexibility. The nature of these changes makes customer requalificationunnecessary. Old style (pre-block point) variable housings and endcaps will no longer be availableas spare parts.
FRAME SIZE: 100
Parts Affected:Pre "blockpoint" New Part Number
Item Description Part Number (92-12 & Later)
Common Parts Group, 100 ccB10 Variable Housing 8200117✧ 726554E10 Side cover 8200011 746560F20 Slider block 8200016*✧ 8200225*G93 Spacer end cap grp 8800564G94 Bracket Lifting end cap grp 8800565G95 Washer n/a 9009610-3459B82 Plug n/a 9005110-5600
End Cap Group, 100 ccG048 End cap-twin ports 8200157✧ 8200235G93 Spacer 8800404 common partG94 Lifting bracket 8800401 common partG308 End cap gasket 8200166*✧ 8200212*G908 Screw 9007314-0608 9007314-0810**G958 Screw 9007314-0608 9007314-0810**G968 Screw 9007314-0607 9007314-0808**G046 End cap-Side ports 8200175✧ 8200236G306 End cap gasket 8200166*✧ 8200212*G906 Screw 9007314-0608 9007314-0810**G956 Screw 9007314-0608 9007314-0810**G968 Screw 9007314-0607 9007314-0808**G172 Plug n/a 9005110-4400G182 Plug n/a 9005110-4400
Special Hardware Features Group, 100 ccB83 Plug-Speed Pick-up n/a 9005110-5600
* Interchangeable part. ✧ Obsolete
63
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
Service Bulletin SB-9203 Rev. A
DISTRIBUTION:
All Product Related Sauer-Sundstrand Distributors
All Product Related OEM's
All ASCs
Non-Restricted Distribution
PARTS DISPOSITION:
Not Applicable
Interchangeable
Non-Interchangeable except where noted
Use Parts in Stock
Scrap Used Parts
Return New Parts for Credit
Order Replacement Parts
Rework Parts in Stock
Revise Existing Part Orders
Scrap New Parts and Supply for Credit
X
XX
MODELS AFFECTED:All Series 90 94-2xxx, 95-2xxx, 96-2xxx, and 97-2xxx Variable Pumps.
SERIAL NUMBERS AFFECTED:Changes will take place at the following Serial Numbers:
55 cc 92-06 & beyond 75 cc 92-18 & beyond100 cc 92-12 & beyond130 cc 92-19 & beyond
PART NUMBERS AFFECTED:
Refer to text of this bulletin for specific part numbers.Housing: (all frame sizes)Thickness adjacent to the side cover has been in-
creased.Side Cover: (100 cc & 130cc only) Thickness increased.End Cap: (all frame sizes) Match housing change; small end cap screws (55 cc-
100 cc) will be larger; the orientation of the charge relief valve on sideport end caps has been changed from an oblique to a vertical orienta-tion.
Controls: (130cc only) Eliminate mounting plate, three-pin link change.Side Cover: (130cc only) Swashplate hold-down ("T-bar") mounting will be changed
to commonize the design with the smaller displacement units.NOTE: Reference PIB-9102 for design changes and outline dimensions.
X
X
64
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
Service Bulletin SB-9211
PRODUCTS AFFECTED:
Swashplate Guide
Swashplate Assembly
Special Screw
Control Feedback Link
SUBJECT:
Effective in September of 1992, the feedback link in Series 90 pumps will be mechanicallyretained to the swashplate. In the past, the link slipped over a specially ground socket headscrew and could fall off the screw during pump assembly. The screw has changed to includea head to retain the link. The feedback link does not change.
DESCRIPTION:
Feedback Link Retention
Series 90: 55, 75 and 100 cc Pumps
65
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
Service Bulletin SB-9211
DISTRIBUTION:
All Product Related Sauer-Sundstrand Distributors
All Product Related OEM's
All ASCs
Non-Restricted Distribution
PARTS DISPOSITION:
Not Applicable
Interchangeable
Non-Interchangeable
Use Parts in Stock
Scrap Used Parts
Return New Parts for Credit
Order Replacement Parts
Rework Parts in Stock
Revise Existing Part Orders
Scrap New Parts and Supply for Credit
X
XX
X
MODELS AFFECTED:
All 94-2xxx (55cc), 95-2xxx (75cc), and 96-2xxx (100cc) pumps.
Old Screw New "Headed" Screw
55 & 75cc 9007276-0109 9007375-0044100cc 9007375-0030 9007375-0032
PART NUMBERS AFFECTED:
SERIAL NUMBERS AFFECTED:
Pumps with S/N A-92-38-xxxxx and beyond include the new feature.
X
66
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
Service Bulletin SB-9301 Rev. A
PRODUCTS AFFECTED:
SUBJECT:
DESCRIPTION:
Series 90 Pumps - 55cc thru 100cc
Charge Pump Design Change
The serial numbers mentioned on the reverse side of this page apply only to Amesproduction units. Neumunster will incorporate the change in July or August of thisyear. A service bulletin will follow when the exact dates are known.
To improve efficiency and reliability, the number of parts in Series 90 charge pumps is beingreduced. The charge pump design on 55cc thru 100cc frame sizes is being changed suchthat the outer port plate (H30) is an integral part of the charge pump cover (J15) and distanceplates are eliminated.
For auxiliary pad options, the new charge pump cover is rotation dependent. The cover willbe marked either left hand (L) or right hand (R). The non-auxiliary pad cover is not rotationdependent.
The charge pump shaft also changes and must be replaced when using the new stylehardware. The complete charge pump assembly can be interchanged with correspondinghardware from89-17 and beyond. However, piece parts are not interchangeable . For units prior to 89-17, consult Sauer-Sundstrand.
67
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
DISTRIBUTION:
All Product Related Sauer-Sundstrand Distributors
All Product Related OEM's
All ASCs
Non-Restricted DistributionX
XX
X
X
Service Bulletin SB-9301 Rev. A
PARTS DISPOSITION:
Not Applicable
Interchangeable
Non-Interchangeable
Use Parts in Stock
Scrap Used Parts
Return New Parts for Credit
Order Replacement Parts
Rework Parts in Stock
Revise Existing Part Orders
Scrap New Parts and Supply for Credit
Interchangeable for S/N's 89-17 and beyond.Piece parts are not interchangeable.
MODELS AFFECTED:
PART NUMBERS AFFECTED:
SERIAL NUMBERS AFFECTED:
55cc: A-93-10 & beyond 75cc: A-93-10 & beyond100cc: A-93-15 & beyond
All 94-2xxx, 95-2xxx, and 96-2xxx Pumps
See Attached Table
68
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
H80
OR
H70
J15N
J30
J40N
H30
H05
OR
(H31)
H40H50
H60
J80N
OR
J92
J10
H80 REF
J70
J95
J90
J60
J50
H70 REF
J15
J30
J
J80
(H30)
H05
H30H40
H50H60
H05H40
H50H60
CURRENT CHARGE PUMP CONFIGURATION EXCEPT FOR 100 CC FRAME SIZE PUMPS
CURRENT CHARGE PUMP CONFIGURATION FOR 100 CC FRAME SIZE PUMPS
NEW CHARGE PUMP CONFIGURATION
NEW CHARGE PUMP COVERS FOR PUMPS WITH AUXILIARY PADS (LEFT HAND AND RIGHT HAND ROTATION VERSIONS INCLUDED IN AUXILARY PAD KIT)
NEW CHARGE PUMP COVER FOR PUMPS WITHOUT AUXILIARY PADS (SAME COVER FOR LEFT HAND OR RIGHT HAND ROTATION)
L
L
THE NEW CHARGE PUMP COVERS HAVE AN 'L' OR 'R' STAMPED ON THEM FOR EASY IDENTIFICATION
Service Bulletin SB-9301 Rev. A
69
sau
eG
enuine Parts
Original
Ersatzteile
Series 90
100 cc Pum
pB
LN-2-41672
May, 1996
Series 90 - 55cc thru 100 cc Charge Pump Configuration
55cc 75cc 100cc
Before After Before After Before After Item93-10 93-10 93-10 93-10 93-10 93-10 Number Description
8000169 8000268 N/A N/A N/A N/A H05B 11 cc Charge Pump Set
8000170 8000269 8100313 8100479 N/A N/A H05C 14 cc Charge Pump Set
8000171 8000270 8100314 8100480 8200158 8200238 H05D 17 cc Charge Pump Set
N/A N/A 8100315 8100481 8200159 8200239 H05E 20 cc Charge Pump Set
N/A N/A N/A N/A 8200160 8200240 H05F 26 cc Charge Pump Set
8800314 N/A 8800314 N/A 8800314 N/A H30 Port Plate
N/A Incl in H05 N/A Incl in H05 8800315- Incl in H05 H31 Port Plate - 100cc
8000174 8000267 337956 8100476 337956 8100476 H50 Charge Pump Shaft
8800513 8800834 8800513 8800834 8800513 8800834 J15N Cover Assy - Charge Pump
8800514 See J15 L/R 8800514 See J15 L/R 8800514 See J15 L/R J15 "Aux" Charge Pump Cover
N/A 8800833 N/A 8800833 N/A 8800833 J15L "Aux" L.H. Cover Assy
N/A 8800832 N/A 8800832 N/A 8800832 J15R "Aux" R.H. Cover Assy
NOTE: PIECE PARTS ARE NOT INTERCHANGEABLE!
Service B
ulletin SB
-9301 Rev. A
70
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
Service Bulletin SB-9203 Rev. A
PRODUCTS AFFECTED: Series 90: 55,75,100, 130 cc PumpsSUBJECT: Block Point Change: Components Redesign
DESCRIPTION:
As part of our overall Series 90 product improvement program, numerous compo-nents are being redesigned. This redesign is referred to as a “blockpoint” change. Theobjective of the blockpoint change is to minimize the number of times we change the unitswhile we convert to high volume tooling at various plant sites. These design improvementswill provide increased reliability and more application flexibility. The nature of these changesmakes customer requalification unnecessary. Old style (pre-block point) variable housingsand end caps will no longer be available as spare parts.
FRAME SIZE: 075Pre "blockpoint" New Part Number
Item Description Part Number (92-19 & Later)
Common Parts Group, 75 ccB10 Variable Housing 716621✧ 724674B82 Plug n/a 9005110-5600G93 Spacer end cap grp 8800564G94 Bracket Lifting end cap grp 8800565G95 Washer end cap grp 9009610-3459G048 End cap-Twin ports 8100292✧ 8100471G308 Gasket 8100270*✧ 8100466*G958 Screw 9007314-0604 9007314-0804**G93 Spacer 8800404 common partG94 Lifting bracket 8800522 common partG95 Washer 9009610-2850 common partG046 End cap-Side ports 8100356✧ 8100472G306 Gasket 8100212*✧ 8100448*G906 Screw 9007210-0611 9007210-0810**G956 Screw 9007314-0608 9007314-0810**G17 Plug n/a 9005110-4400G18 Plug n/a 9005110-4400B83 Plug-Speed Pick-up n/a 9005110-5600
* Interchangeable part. ✧ Obsolete
71
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
Service Bulletin SB-9203 Rev. A
DISTRIBUTION:
All Product Related Sauer-Sundstrand Distributors
All Product Related OEM's
All ASCs
Non-Restricted Distribution
PARTS DISPOSITION:
Not Applicable
Interchangeable
Non-Interchangeable except where noted
Use Parts in Stock
Scrap Used Parts
Return New Parts for Credit
Order Replacement Parts
Rework Parts in Stock
Revise Existing Part Orders
Scrap New Parts and Supply for Credit
X
XX
MODELS AFFECTED:All Series 90 94-2xxx, 95-2xxx, 96-2xxx, and 97-2xxx Variable Pumps.
SERIAL NUMBERS AFFECTED:Changes will take place at the following Serial Numbers:
55 cc 92-06 & beyond 75 cc 92-19 & beyond100 cc 92-12 & beyond130 cc 92-19 & beyond
PART NUMBERS AFFECTED:
Refer to text of this bulletin for specific part numbers.Housing: (all frame sizes)Thickness adjacent to the side cover has been in-
creased.Side Cover: (100 cc & 130cc only) Thickness increased.End Cap: (all frame sizes) Match housing change; small end cap screws (55 cc-
100 cc) will be larger; the orientation of the charge relief valve on sideport end caps has been changed from an oblique to a vertical orienta-tion.
Controls: (130cc only) Eliminate mounting plate, three-pin link change.Side Cover: (130cc only) Swashplate hold-down ("T-bar") mounting will be changed
to commonize the design with the smaller displacement units.NOTE: Reference PIB-9102 for design changes and outline dimensions.
X
X
72
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
Service Bulletin SB-9312
PRODUCTS AFFECTED:
SUBJECT:
DESCRIPTION:
C16C15
C14C80
C13
C05
S07
C70C65
C40C50
C30
C20
Due to the increasing number of valve plate options, the valve plate (item C80) will be nolonger included in the cylinder block kit (item S07) on all Series 90 variable pumps. Valveplates must be ordered separately for service parts. See special hardware features groupin your Service Parts Manual for appropriate valve plate number.
All Series 90 Pumps
Removal of Valve Plate from Cylinder Block Kit
73
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
Service Bulletin SB-9312
DISTRIBUTION:
All Product Related Sauer-Sundstrand Distributors
All Product Related OEM's
All ASCs
Non-Restricted Distribution
PARTS DISPOSITION:
Not Applicable
Interchangeable
Non-Interchangeable
Use Parts in Stock
Scrap Used Parts
Return New Parts for Credit
Order Replacement Parts
Rework Parts in Stock
Revise Existing Part Orders
Scrap New Parts and Supply for Credit
XX
MODELS AFFECTED:
SERIAL NUMBERS AFFECTED:
Not Applicable
Frame Size Cylinder Block Kit 42 cc 80520S07 55 cc 80020S07 75 cc 81020S07 100 cc 82020S07 130 cc 83020S07
PART NUMBERS AFFECTED:
X
All 93-2xxx, 94-2xxx, 95-2xxx, 96-2xx, and 97-2xxx pumps.
74
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
Service Bulletin SB-9315 Rev. A
PRODUCTS AFFECTED:
SUBJECT:
Clearance Slot for Speed Sensor Ring
Servo Arm Assembly (item D10)
Swashplate (item D50)
NOTE: This Service Bulletin revision adds the 042 cc Frame Size and the incorpora-tion date of the 055 through 100 cc.
A potential interference problem has been identified in Series 90 042, 055, 075, and 100frame size pumps built since early 1992. Interference may occur between the swashplatehold down bracket on the servo arm and the speed sensor ring, which may be installed onthe cylinder block as an option.
A new hold down bracket has been designed to provide clearance for the speed sensor ring.
If a cylinder block with speed sensor ring must be installed in one of the subject pumps, aservo arm assembly with the new style hold down will also be required.
Sometime during the first quarter of 1994, all 055, 075 and 100 cc pumps will be equippedwith the new design hold down bracket. The 042 cc pumps will implement the new designhold down bracket in the second quarter of 1994. A revision to this bulletin will be issuedwhen exact incorporation date is known.
DESCRIPTION:
Servo Arm Interference with Speed Sensor Ring
90 Series Variable Pumps 042, 055, 075 and 100 cc
75
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
DISTRIBUTION:
All Product Related Sauer-Sundstrand Distributors
All Product Related OEM's
All ASCs
Non-Restricted Distribution
PARTS DISPOSITION:
Not Applicable
Interchangeable
Non-Interchangeable
Use Parts in Stock
Scrap Used Parts
Return New Parts for Credit
Order Replacement Parts
Rework Parts in Stock
Revise Existing Part Orders
Scrap New Parts and Supply for Credit
XX
- Pumps with a speed ring must use the new servo arm.X
XX
MODELS AFFECTED:All 93-2xxx, 94-2xxx, 95-2xxx, 96-2xx, and 97-2xxx pumps.
PART NUMBERS AFFECTED:
SERIAL NUMBERS AFFECTED:042 cc → S/N's beginning with 92-16 and later055 cc → S/N's beginning with 92-06 and later075 cc → S/N's beginning with 92-17 and later100 cc → S/N's beginning with 92-12 and later
All 55, 75, 100 cc units built in Ames beginning with S/N A-94-11 and later will have thenew servo arm assembly installed. The 100 cc units from Neumunster will also incorpo-rate on this date. The 75 cc units built in Neumunster will incorporate on 94-14. The 42cc does not have an incorporation date as of yet.
Old Servo Arm New Servo ArmFrame Size (no slot in bracket) (with slotted bracket)
042 cc 354282 502976055 cc 8000191 8000318075 cc 8100366 8100499100 cc 8200182 8200268
Service Bulletin SB-9315 Rev. A
76
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
Service Bulletin SB-9413 Rev. A
PRODUCTS AFFECTED:
DESCRIPTION:
A
Silver Pulse Pick-up Body
A small number of pulse pick-ups used on pumps and motors between June 1992 and April1994 have been found to be defective due to corrosion of internal circuitry.
The corrosion of the internal circuitry may cause intermittent operation or partial loss ofsignal and eventual failure.
A typical installation of a pulse pick-up is pictured below. Note the "silver" color of thepotentially defective pulse pick-up body. This should be replaced with a pulse pick-up bodythat is "black" in color.
NOTE: If your speed sensor is in an electrical closed loop feedback circuit, possibly usedwith a microprocessor, the silver colored speed sensor must be changed regardless of thespecial hardware features code.
Series 90 and Series 51 Units withPulse Pickup (Speed Sensing)
SUBJECT: Pulse Pick-up Change
77
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
Service Bulletin SB-9413 Rev. A
51V160 RFINF1A1 ANE1 ACA
050AA21 0322
90L055 EA 1 N6 S 3 C6 C 03EAA 35 35 24
DISTRIBUTION:
All Product Related Sauer-Sundstrand Distributors
All Product Related OEM's
All ASCs
Non-Restricted Distribution
PARTS DISPOSITION:
Not Applicable
Interchangeable
Non-Interchangeable
Use Parts in Stock
Scrap Used Parts
Return New Parts for Credit
Order Replacement Parts
Rework Parts in Stock
Revise Existing Part Orders
Scrap New Parts and Supply for Credit
XX
Sensor Connector Style Body Color
KPPA124 Weather Pack Silver
KPPB124 Weather Pack Silver
KPPA125 Metri Pac Silver
KPPB125 Metri Pac Silver
KPPC124 Weather Pac Black
KPPC125 Metri Pac Black
PART NUMBERS AFFECTED:
MODELS AFFECTED:All pumps and motors that used the pulse pick-up option,which is indicated by the special hardware features ordercode.Options: 51 Series = ACA, NNT, AAA, NNU, ABA
90 Series = EAA, EAB, EAD, NNS, EBB, ECA
A-92-22-xxxxx thru A-94-17-xxxxxSERIAL NUMBERS AFFECTED:
X
X
X
78
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
PRODUCTS AFFECTED:
DESCRIPTION:
SUBJECT:
Service Bulletin SB-9417
As a product improvement, Sauer-Sundstrand has made a design change to the cagelocator link (item no. D80) used on the 55 cc through 100 cc variable pumps.
The new link is made from square wire. In the past, the link was made from round wire. Thisis an interchangeable change.
Swashplate Cage Locator
Series 90, 55 - 100 cc Variable Pumps
Cage Locator Link (D80)
79
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
Service Bulletin SB-9417
MODELS AFFECTED:
All 94-2xxx + 942xxx, 95-2xxx + 952xxx, and 96-2xxx + 962xxx pumps
DISTRIBUTION:
All Product Related Sauer-Sundstrand Distributors
All Product Related OEM's
All ASCs
Non-Restricted Distribution
PARTS DISPOSITION:
Not Applicable
Interchangeable
Non-Interchangeable
Use Parts in Stock
Scrap Used Parts
Return New Parts for Credit
Order Replacement Parts
Rework Parts in Stock
Revise Existing Part Orders
Scrap New Parts and Supply for Credit
XX
X
X
X
PART NUMBERS AFFECTED:
Old Link New Link55 & 75 cc 8100241 8100506 100 cc 8200108 8200273
SERIAL NUMBERS AFFECTED:
55 - 75 cc ➛ 94-18 and beyond100 cc ➛ Beginning 4th Quarter 1994
80
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
Service Bulletin SB-9418
PRODUCTS AFFECTED: Series 90 Variable PumpsSUBJECT: Side Cover Washer Elimination
DESCRIPTION:
Washer - No Longer Used
New Special Screw
The washers located under the side cover screws have been removed on all Series 9042 thru 130 cc variable pumps.
As before, the side cover screws must be replaced if they are removed for any reason.The special coating, which seals and retains the screws, wears off when the screws areremoved.
The screw length changed on 55 thru 100 cc pumps, so it is important that the washersare discarded during repair. The proper screw is included in the overhaul seal kits.
81
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
Service Bulletin SB-9418
MODELS AFFECTED:
DISTRIBUTION:
All Product Related Sauer-Sundstrand Distributors
All Product Related OEM's
All ASCs
Non-Restricted Distribution
PARTS DISPOSITION:
Not Applicable
Interchangeable
Non-Interchangeable
Use Parts in Stock
Scrap Used Parts
Return New Parts for Credit
Order Replacement Parts
Rework Parts in Stock
Revise Existing Part Orders
Scrap New Parts and Supply for Credit
X
XX
X
SERIAL NUMBERS AFFECTED:
PART NUMBERS AFFECTED:
Change took place during the 2nd and 3rd quarter of 1994
All Series 90 42 thru 130 cc variable pumps
42 cc55-100 cc
130 cc
Pump Size Old Screw New Screw
Same Part Number5000206
Same Part Number
6484779007276-0115
308700
82
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
Service Bulletin SB-9435
PRODUCTS AFFECTED: Series 90 100 cc Variable PumpsSUBJECT: Elimination of Housing/End Cap Screw
DESCRIPTION:As a product improvement, Sauer-Sundstrand reinforced the 100 cc pump housing, eliminatingthe need for the screw shown below.
The hole was not removed from the end cap gasket so it can be used with any housing/endcap combination.
The hole was removed from the end cap, but the part number did not change. The new endcap can be used with either housing.
The old housing was obsoleted and no longer available as a service part.
Screw (Deleted)
Housing
Gasket
End Cap
83
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
Service Bulletin SB-9435
MODELS AFFECTED:
DISTRIBUTION:
All Product Related Sauer-Sundstrand Distributors
All Product Related OEM's
All ASCs
Non-Restricted Distribution
PARTS DISPOSITION:
Not Applicable
Interchangeable
Non-Interchangeable
Use Parts in Stock
Scrap Used Parts
Return New Parts for Credit
Order Replacement Parts
Rework Parts in Stock
Revise Existing Part Orders
Scrap New Parts and Supply for Credit
X
XX
X
SERIAL NUMBERS AFFECTED:
PART NUMBERS AFFECTED:
Part Number Part NumberDescription (prior to 95-07) (95-07 & beyond)Housing 726554 8200305Screw 9007314-0808 No longer required
Change occurred at serial number 95-07-xxxxx
All Series 90 100 cc Variable Pumps
84
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
Series 90 55 thru 130 cc Variable Pumps
Integral Filtration Manifold
As a product improvement, Sauer-Sundstrand is changing the integral filter manifold andbulkhead nut to make it more easily indexed.
The old bulkhead nut may be used with either the old or new filter manifold. The newbulkhead nut can only be used with the new filter manifold.
The old bulkhead nut will remain available as a service part. The old filter manifold will beobsoleted and no longer available as a service part.
Manifold
Nut
Manifold
Nut
Old Design
New Design
Service Bulletin SB-9436
PRODUCTS AFFECTED:
SUBJECT:
DESCRIPTION:
85
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
PARTS DISPOSITION:
Not Applicable
Interchangeable
Non-Interchangeable
Use Parts in Stock
Scrap Used Parts
Return New Parts for Credit
Order Replacement Parts
Rework Parts in Stock
Revise Existing Part Orders
Scrap New Parts and Supply for Credit
Part Number Part NumberDescription (prior to 95-18) (95-18 & beyond)Filter Manifold 8800200 8800896Bulkhead Nut 9002863-1600 5000222
- new bulkhead nut can only be used with new filter manifold
Change occurred at serial number 95-18-xxxxx
All Series 90 55 thru 130 cc Variable Pumps with 'L', 'M', or 'P' filtration option code
DISTRIBUTION:
All Product Related Sauer-Sundstrand Distributors
All Product Related OEM's
All ASCs
Non-Restricted DistributionXX
XX
MODELS AFFECTED:
Service Bulletin SB-9436
PART NUMBERS AFFECTED:
SERIAL NUMBERS AFFECTED:
X
86
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
Series 90 55 thru 130 cc Variable Pumps
Integral Filtration Manifold
As a product improvement, Sauer-Sundstrand is changing the integral filter manifold andbulkhead nut to make it more easily indexed.
The old bulkhead nut may be used with either the old or new filter manifold. The newbulkhead nut can only be used with the new filter manifold.
The old bulkhead nut will remain available as a service part. The old filter manifold will beobsoleted and no longer available as a service part.
Manifold
Nut
Manifold
Nut
Old Design
New Design
Service Bulletin SB-9436
PRODUCTS AFFECTED:
SUBJECT:
DESCRIPTION:
87
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
PARTS DISPOSITION:
Not Applicable
Interchangeable
Non-Interchangeable
Use Parts in Stock
Scrap Used Parts
Return New Parts for Credit
Order Replacement Parts
Rework Parts in Stock
Revise Existing Part Orders
Scrap New Parts and Supply for Credit
Part Number Part NumberDescription (prior to 95-18) (95-18 & beyond)Filter Manifold 8800200 8800896Bulkhead Nut 9002863-1600 5000222
- new bulkhead nut can only be used with new filter manifold
Change occurred at serial number 95-18-xxxxx
All Series 90 55 thru 130 cc Variable Pumps with 'L', 'M', or 'P' filtration option code
DISTRIBUTION:
All Product Related Sauer-Sundstrand Distributors
All Product Related OEM's
All ASCs
Non-Restricted DistributionXX
XX
MODELS AFFECTED:
Service Bulletin SB-9436
PART NUMBERS AFFECTED:
SERIAL NUMBERS AFFECTED:
X
88
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
Service Bulletin SB-9503
PRODUCTS AFFECTED:
SUBJECT:
DESCRIPTION:
Series 90 Pumps - All Frame Sizes
Manual Displacement Control (MDC) with DC Electric Solenoid Override
In order to accomodate our European customers, the manifold which attaches to the frontof the manual displacement control (MDC) housing is being changed.
The European solenoid valve requires a thicker manifold to provide clearance betweenthe solenoid and the front of the MDC housing. The revised manifold will protrude closerto the mounting flange of the pump, reducing dimension "A" shown in the accompanyingdrawing by approximately 5 mm [0.2 in]. Please see chart below for specific clearances.
The thicker manifold requires longer screws and may be used with either the U.S. orEuropean sourced solenoid.
This change will become effective during March of 1995. The old manifold will beobsoleted and no longer available as a service part.
Frame Size 042 055 075 100 130
Dimension Current 39.9 55.9 54.1 60.2 74.4"A" [1.57] [2.20] [2.13] [2.37] [2.93]
mm Future 34.9 50.9 49.1 55.2 69.4[in] [1.37] [2.0] [1.93] [2.17] [2.73]
NEUTRAL START SWITCH (NSS) OPTION
SERIES 90 MANUAL DISPLACEMENT CONTROL
WITH DC SOLENOID OVERRIDE
TOP VIEW VIEW IN DIRECTION "X" FRONT VIEW
"A"
SOLENOID VALVE
"X"
89
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
PARTS DISPOSITION:
Not Applicable
Interchangeable
Non-Interchangeable
Use Parts in Stock
Scrap Used Parts
Return New Parts for Credit
Order Replacement Parts
Rework Parts in Stock
Revise Existing Part Orders
Scrap New Parts and Supply for Credit
DISTRIBUTION:
All Product Related Sauer-Sundstrand Distributors
All Product Related OEM's
All ASCs
Non-Restricted DistributionXX
XX
MODELS AFFECTED:
Service Bulletin SB-9503
PART NUMBERS AFFECTED:
SERIAL NUMBERS AFFECTED:
All Series 90 Variable Pumps using manual displacement control (MDC) withDC electric solenoid override.
Change will take place in March '95
Current Part Number New Part Number Quantity
Manifold 8800365 505022 1
Screw 9007314-0605 9007314-0606 2
X (new manifold requires longer screws)
90
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
Service Bulletin SB-9510
PRODUCTS AFFECTED:
SUBJECT:
DESCRIPTION:
Solenoid Valve Change
Sauer-Sundstrand has changed suppliers of the solenoid valve for the manual displacementcontrol with 12 volt two position solenoid valve (order codes ME and MJ).
The new solenoid valve requires shorter mounting screws.
The old solenoid valve is being obsoleted and no longer available as a service part. A kithas been created that includes the new solenoid valve and the appropriate mountingscrews.
Series 90 Variable Pumps
Mounting ScrewSolenoid
91
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
PARTS DISPOSITION:
Not Applicable
Interchangeable
Non-Interchangeable
Use Parts in Stock
Scrap Used Parts
Return New Parts for Credit
Order Replacement Parts
Rework Parts in Stock
Revise Existing Part Orders
Scrap New Parts and Supply for Credit
DISTRIBUTION:
All Product Related Sauer-Sundstrand Distributors
All Product Related OEM's
All ASCs
Non-Restricted DistributionXX
XX
MODELS AFFECTED:
Service Bulletin SB-9510
PART NUMBERS AFFECTED:
SERIAL NUMBERS AFFECTED:
X ☛ Piece parts are not interchangeable.
Units built N-95-24-xxxxx and after
All Series 90 variable pumps using control order codes ME and MJ
Old Solenoid
504381
Old Screws
9007315-0510 8510107
ReplacementKit
92
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
Neutral Start Switch Change
Sauer-Sundstrand has changed suppliers of the neutral start switch on Series 20 andsome neutral start switch options (MR, MS and ML) on Series 90 pumps. Advancednotification of this change was given with Product Information Bulletin number PIB-9403.
The new switch has Teflon tape on the threads instead of Vibra-Seal. New Teflon tapeshould be applied to the threads if the switch is removed for any reason.
Due to interchangeability, the old switch has been obsoleted and no longer available asa service part.
Series 20 & 90 Pumps WithOptional Neutral Start Switch
Teflon Tape Applied To Threads
Service Bulletin SB-9514
PRODUCTS AFFECTED:
DESCRIPTION:
SUBJECT:
93
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
Service Bulletin SB-9514
PARTS DISPOSITION:
Not Applicable
Interchangeable
Non-Interchangeable
Use Parts in Stock
Scrap Used Parts
Return New Parts for Credit
Order Replacement Parts
Rework Parts in Stock
Revise Existing Part Orders
Scrap New Parts and Supply for Credit
X
X
X
X
MODELS AFFECTED:
DISTRIBUTION:
All Product Related Sauer-Sundstrand Distributors
All Product Related OEM's
All ASCs
Non-Restricted Distribution
PART NUMBERS AFFECTED:
SERIAL NUMBERS AFFECTED:
X
Units built N-95-17-xxxxx and after
All Series 20 variable pumps and Series 90 variable pumps using control order codesML, MR and MS
* The Neutral Start Switch Kit part number did not change
Old Switch
9700922
New Switch
503545
NSS Kit
8510027*
94
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
Service Bulletin SB-9515
PRODUCTS AFFECTED:
DESCRIPTION:
SUBJECT: Valve plate part number change
Sauer-Sundstrand has changed the sourcing of valve plates on 75 and 100 cc variabledisplacement pumps.
The new valve plate is interchangeable with the old valve plate. The old valve plate willbe obsoleted and no longer available as a service part. Due to interchangeability, any oldvalve plates in inventory may be used or reidentified as the new part number.
Series 90 75 & 100 Pumps
95
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
Service Bulletin SB-9515
PARTS DISPOSITION:
Not Applicable
Interchangeable
Non-Interchangeable
Use Parts in Stock
Scrap Used Parts
Return New Parts for Credit
Order Replacement Parts
Rework Parts in Stock
Revise Existing Part Orders
Scrap New Parts and Supply for Credit
X
X
X
X
MODELS AFFECTED:
DISTRIBUTION:
All Product Related Sauer-Sundstrand Distributors
All Product Related OEM's
All ASCs
Non-Restricted Distribution
PART NUMBERS AFFECTED:
SERIAL NUMBERS AFFECTED:
X
All Series 90 75 cc variable pumps using EBC, FAC and GBA 'Special Hardware'order code.
All Series 90 100 cc variable pumps using EDB, FAC, FAD,GBA and GBG 'SpecialHardware' order code.
Not Applicable
new number
-
501327
501328
501327
501327
501327
old number
758409
-
737460
-
758409
-
OrderCode
EBC
EDB
FAC
FAD
GBA
GBG
new number
501332
-
501333
-
501332
-
old number
-
758417
737478
758417
758417
758417
75 cc 100 cc
X
X
96
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
Service Bulletin SB-9525
PRODUCTS AFFECTED:
SUBJECT:
DESCRIPTION:
Side Cover Design Change
Series 90, 55, 75, & 100 cc Variable Pumps
As a product improvement, Sauer-Sundstrand is changing the side cover and swashplateleveler ("T-Bar") guide post design.
The new design side cover will have two hardened inserts in the machined slot whichserves as a guide for the swashplate leveler, and modified guide posts. The swashplateleveler does not change.
Old guide posts will remain available for service requirements of pumps with the olddesign side cover.
The old style side cover will be obsoleted and no longer available as a service part. Aservice kit has been created for replacing the old design side cover. The kit includes thenew side cover, guide posts and inserts. Piece parts are not interchangeable.
Guide Post
Swashplate Leveler
Side Cover
Guide Post
Inserts
97
saueGenuine Parts
Original Ersatzteile
Series 90100 cc Pump
BLN-2-41672May, 1996
PARTS DISPOSITION:
Not Applicable
Interchangeable
Non-Interchangeable
Use Parts in Stock
Scrap Used Parts
Return New Parts for Credit
Order Replacement Parts
Rework Parts in Stock
Revise Existing Part Orders
Scrap New Parts and Supply for Credit
DISTRIBUTION:
All Product Related Sauer-Sundstrand Distributors
All Product Related OEM's
All ASCs
Non-Restricted DistributionXX
XX
MODELS AFFECTED:
Service Bulletin SB-9525
PART NUMBERS AFFECTED:
SERIAL NUMBERS AFFECTED:
All 55, 75 & 100 cc variable pumps
X
Side Cover Kit
8510097
8510098
8510099*
Description
55 cc
75 cc
100 cc
Insert assy.
8000406
8100562
506914
Guide Post
8000379
8000379
8000379
Old Part Numbers New Part Numbers
Guide Post
8100353
8100353
8100353
Side Cover
8000157
8100226
746560
This change became effective at serial number N-95-50-xxxxx
Piece parts are not interchangeable
BLN-2-41672 • May, 1996
SAUER-SUNDSTRAND Hydraulic Power Systems - Market Leaders Worldwide
SAUER-SUNDSTRAND specializes in integrating a fullrange of system components to provide vehicle designerswith the most advanced total-design system.
SAUER-SUNDSTRAND is Your World Source forControlled Hydraulic Power Systems.
SAUER-SUNDSTRAND is a world leader in the design andmanufacture of Hydraulic Power Systems. Research anddevelopment resources in both North America and Europeenable SAUER-SUNDSTRAND to offer a wide range ofdesign solutions utilizing hydraulic power systemtechnology.
Worldwide Service Support
SAUER-SUNDSTRAND provides comprehensive worldwide service for itsproducts through an extensive network of Authorized Service Centersstrategically located in all parts of the world.
Look to SAUER-SUNDSTRAND for the best in WORLDWIDE SERVICE.
Genuine Service PartsGear Pumps and MotorsOpen Circuit Axial Piston Pumps
Hydraulic Power Systems
Cartridge Motors/Compact Wheel Drives
Heavy Duty Bent AxisVariable Motors
Heavy Duty Axial PistonPumps and Motors
Hydrostatic TransmissionPackages
Medium Duty Axial PistonPumps and Motors
Microcontrollers andElectrohydraulic Controls
saue
Genuine Parts Original
Ersatzteile
saue
SAUER-SUNDSTRAND GMBH & CO.Postfach 2460 • D-24531 NeumünsterKrokamp 35 • D-24539 Neumünster • GermanyPhone: (04321) 871-0 • Fax: (04321) 871122
SAUER-SUNDSTRAND COMPANY2800 East 13th StreetAmes IA 50010 • U.S.A.Phone: (515) 239-6000 • FAX: (515) 239-6318
top related