3m telecomunicaciones - comunitelsa.com.arcomunitelsa.com.ar/micrositios_contents/36arc_cmd.pdf ·...

TMConector Volition RJ45 K6Categoría 6 Keystone

3M ArgentinaCommunicactions Market Division

Los Arboles 842 (1686)Hurlingham – Prov. Bs. As.

Tel. 4469-8200 Fax: 4469-8261SAC: 4469-8588

Email :[email protected]

DescripciónSin duda alguna, esta es la major forma de realizar sus instalaciones de redes de Voz, Datos y Video.Como parte de la gran solución de cableado estructurado Volition Categoría 6, es la manera mas fácil más rápida y más segura de cablear el futuro.EL K6 es la base de nuestra nueva solución,conceptualizada de manera modular para adaptarse perfectamente a los paneles de parcheo, placas y accesorios de la nueva gama de productos en Categoría 6 para versiones Keystone.Los nuevos conectores Keystone le ofrecen el mejor desem-peño y margen de operación aun por encima de los standards marcados por las normas internacionales Clase E / Cat6.

CertificacionesNuestros productos cumplen con todos los standars interna-cionales ISO 11801 TIA/EIA 568B, TIA/EIA 758, ANSI/TIA/EIA 606 con certificación de 20 años. 250 Mhz Cat.6

Versiones· Para cables UTP· Para Cables FTP con Pantalla· Blindados 360 grados

Sin herramientasFácil de instalar. Conexión rápida y confiable (los 8 conduc-tores son colocados en una sola operaciones) sistema One Click. Inmejorable diseño de la conexión: no depende de una herramienta, operación o destreza, solo escuche el Click y listo. Resultados consistentes: longitud del destrenzado, distancia entre el contacto autodesnudante y la vaina del cable mínimos.Acepta varios calibres AWG 26 hasta AWG 22. Reutilizable en caso de error de conexión de colores.

ModularSe adapta a los Face Plate, Rosetas, Paneles, Accesorios modelos Keystone.

CompactoFácil Manejo e identificación de Cables. Mayor espacio y flexibilidad para asegurar el radio de curvatura. Permite gran rango de opciones de colocación

Mayor protecciónPuerta protectora “integrada” contra polvo y ambientes contaminados. Especialmente diseñado para mantener instalaciones limpias y mantener contactos protegidos.

IdentificaciónCod. 41917 - Jack RJ45 Keystone Cat. 6 con tapa cubrepolvo

Empaque por 24 unidades

Instalación

3M ArgentinaCommunicactions Market Division

Los Arboles 842 (1686)Hurlingham – Prov. Bs. As.

Tel. 4469-8200 Fax: 4469-8261SAC: 4469-8588

Email :[email protected]

Enlace permanente Clase E

Valores típicos de next: 10 dB Margin

Fibre Optic Closure 2179-CS

Features

• Compact in size (44,7cm x 17,52cm x 10,67cm)

• Fiber capacity up to 48 single fibres

• Accepts variety of splice/protector versions; heath shrink single fusion spliceprotector, crimp ptotector, FibrlokÙ

• Proven sealing technology

• Available in complete kit (with trays + accessories)

• Sliding latch mechanism

The Fibre Optic Closure 2179-CS is designed and developed based

on the proven 3M sealing technology. It is made of plastic molded

parts and mastic sealing materials. Closing of the closure is simply

done by the sliding latching mechanism. 2179-CS latching system

provides short installation time and easy re-entry. There is no need for

special tooling for closing and opening the closure..

Applications

Closure is suitable for the applications up to 48 single fibers, which

can cover most of the applications in the fiber distribution networks

like Fiber To The Home / Fiber To The Curb (FTTH/FTTC)

Underground, aerial, pedestal or direct buried applications are possi-

ble with the closure. 2179-CS has chemical and mechanical resi-

stance for all the application areas in the fiber networks. Can be used

in BUTT or In-Line configuration.

Kit contents

2179-CS closure kit includes all necessary parts to complete

closure installation. Tray type and the number of the trays needs to

be selected according to the application needs. FOT001 trays can be

supplied with the closure as standard. If DIN trays are required

“2179-CS Closure Kit w/DIN tray bracket w/o tray” version should be

selected and the DIN tray(s) & tray accessories should be ordered

separately.

Fibre Optic Closure 2179-CS

Benefits

• Suitable for limited space applications, too. ( hadholes)

• Applicable for all networks. FTTH /FTTC solutions.

• Covers different splice methods for low fiber count applications

• Wide area of usage; underground, aerial, direct buried, pedestal

• Reduced inventory

• No requirement for special tooling. Saves time and cost

• Easy application

Capacity

The closure can accept cable sizes from 1,01 cm (0,4") to

2,54 cm (1"). Maximum number of cable entries is 4 in In-Line

configuration. 2179-CS can be used with 3M FOT001 trays, suitable

for single fiber fusion splices, as standard. 2179-CS closure also has

the version that can accommodate DIN splice trays where Fibrlok™ or

crimp protectors are used. For both tray systems it is possible to place

maximum 4 trays and maximum 12 fiber slices per tray in 2179-CS.

Fibre optic closure 2179-CS (w/o tray) MOQ: 15 each 2179-CS/0

Fibre optic closure 2179-CS (12C w/1 tray) MOQ: 15 each 2179-CS/1

Fibre optic closure 2179-CS (24C w/2 trays) MOQ: 15 each 2179-CS/2



Closure Kit 2179-CS w/DIN tray bracket w/o tray MOQ: 15 each 2179-CS/DIN

Additional partsAerial Hanger Kit MOQ: 15 each 2179-CS/AHK

Re-entry Accessory Kit 2180-CS MOQ: 15 each 2180-CS/RAK

Port Accessory Kit 2179-CS MOQ: 15 each 2179-CS/PAK

Pole Mount Accessory Kit 2179-CS MOQ: 15 each 2179-CS/PK

Quante AG 3M Telecommunications Uellendahler Str. 353 · D-42109 Wuppertal Tel.: ++49 (0)202/ 292 - 0Fax: ++49 (0)202/ 292 - 2893

Important Notice

3M does not accept reponsibility or liability, direct or consequential arising from reliance upon

any information provided and the user should determine the suitability of the products for their

intended use. Nothing in this statement will be deemed to exclude or restrict 3M s liability for

death or personal injury arising from its negligence. All questions of liability relating to 3M prod-

ucts are governed by the seller s terms of sale subject where applicable to the prevailing law.

If any goods supplied or process ed by or on behalf of 3M prove on inspection to be defec-

tive in material or workmanship, 3M will (at its option) replace the same or refund to the Buyer

the price of the goods or services. Except as set out above, all warranties and conditions,

whether express or implied, statutory or otherwise are excluded to the fullest extent permissi-

ble at law.

Specifications

Ordering Information Ref.-No.

Rig

hts

rese

rved

to

mak

e te

chni

cal a

ltern

atio

ns.

Dr.N

r. 07

-404

-688

00/0

7.20

03-p

df

Technical characteristics

Cable strength: 40kPa, 1000N for 1min, No apparent splice case degradation happened. No leakage.

Cable compress: 100N, 1min, No apparent splice case de-gradation happened. No leakage.

Vibration: 40kPa A=±1.5mm, f=25Hz, 15min, No apparent splice case degradation happened. No leakage.

Cable bend: 40kPa, 150mm, ±45degree, 10Cy., No apparent splice case degradation happened. No leakage.

Cable torsion: 500mm, ±90 degree, 10Cy. No apparent splice case degradation happened. No leakage.

Rust resistance: Metal part: salt spray for 30days, without rustTemperature cycling.: -40c-20C-60C, 2h ,10Cy.

Then fill 60kPa air-pressure, without leakage.Impact: 1kg,1m @-20C. No apparent splice case

degradation happened. No leakage.Immersion: Water depth 2.5m, 30 days, without water

intrusion.Air tightness: 100kPa@Room temperature, 5 min. No appar-

ent splice case degradation happened. No leakage.

Insulation: Water depth 1.5m, 24hours, 15kVDC for 1min,R>20000Mohm@500VDC

Compression: 40kPa, 2000N/10cm, 1min, No apparent splice case degradation happened. No leakage.

Chemical Resistance: 40kPa, 5%HCL, 5%NaOH, 5%NaCl for 24hours. Without corrosion and leakage.

Physical characteristics

Material: Molded plasticOutside dimension (LxWxH): 15.7” x 6.9”x 4.2”Splice chamber space (LxWxH): 12”x4.7”x 3.3”Weight (without kit): 1715gCable diameter: 0.4 – 1 inchCable port: 4 ( 2 each side )Quantity of cables installed: 2 - 4Maximum number of trays: 3M FOT001 Slice Trays 4

DIN trays 4 Capacity of 3M FOT001 Tray: 12 single Fusion splices / trayCapacity of DIN tray: Max 12 single Fusion splices / tray

Max 12 single Fibrlok™ / trayMax 12 single Crimp splices / tray

Looping length of bare fibres: >2 X 0.8mLooping length of fibre with loose-tube: >2 X 0.8m

3M and Volition are trademarks of 3M. Quante is a trademark of Quante AG.

Cable Fibra Óptica Antiroedor de acero

Aplicación

Los cables ópticos 3M cuentan con una excelente protección y transmisión óptica. Estos cables son constituidos por materiales bloqueadores del agua, cubierta interna, elementos de refuerzo y una protección externa especial con cinta de acero corrugado contra ataques de roedores.

Características Básicas

Aptos para Instalación en ducto, subducto o utilizados en instalaciones aéreas devanadas;Sistemas de comunicación óptica de larga distancia;Capacidad de transmisión en 1310nm o 1550nm;Regiones donde existan ataques biológicos ( Roedores, Fungos, Termitas).

Excelente performance óptica y mecánica;Protección contra humedad;Protección con cinta de acero corrugada contra roedores;Núcleo relleno;Tecnología tubo holgado relleno y cableado SZ;Elementos de refuerzo en hilos de fibra de vidrio;Cubierta interna y externa en polietileno de baja densidad negro;Protección contra acción de fungos y bacterias y Rayos Ultra violeta.

Descripción

Construcción

Garantía

La única responsabilidad del vendedor o fabricante será la de reemplazar la cantidad de este producto que se pruebe ser defectuoso de fábrica. Ni el vendedor ni el fabricante serán responsables de cualquier lesión personal pérdida o daños ya sean directos o consecuentes que resulten del uso de este producto.Antes de usarlo, el usuario deberá determinar si el producto es apropiado para el uso pretendido y el usuario asume toda responsabilidad y riesgo en conexión con dicho uso.

3M ArgentinaCommunications Market DivisionOlga Cossettini 1031 (C1107CEA)

Ciudad Autónoma de Buenos Aires.Tel. 4339-2400 Fax: 4339-2580

SAC: 4339-2588Email :[email protected]

Código de colores - Tubos holgados / Fibras ópticas

Características Mecánicas y Ambientales

Cable Fibra Óptica para Ducto

Aplicación

Los cables ópticos 3M cuentan con una excelente protección y transmisión óptica. Estos cables son aptos para instalaciones en ducto o subductos.

Características Básicas

IInstalación en ducto o subducto, pudendo ser utilizado en instalaciones aéreas devanadas;Sistemas de comunicación óptica de largas distancias;Capacidad de transmisión en 850nm, 1310nm o 1550nm..

Excelente performance óptica y mecánica;Núcleo relleno;Tecnología tubo loose relleno y cableado SZ;Hilos de fibra de vidrio como elementos de refuerzo;Cubierta externa en polietileno de baja densidad negro;Cable totalmente dieléctrico;Instalación por lo método soplado;Protección contra acción de fungos y bacterias;Especificación Aplicable: BELLCORE GR 20.

Descripción

Construcción

Garantía

La única responsabilidad del vendedor o fabricante será la de reemplazar la cantidad de este producto que se pruebe ser defectuoso de fábrica. Ni el vendedor ni el fabricante serán responsables de cualquier lesión personal pérdida o daños ya sean directos o consecuentes que resulten del uso de este producto.Antes de usarlo, el usuario deberá determinar si el producto es apropiado para el uso pretendido y el usuario asume toda responsabilidad y riesgo en conexión con dicho uso.




Código de colores - Tubos holgados / Fibras ópticas

Características Mecánicas y Ambientales

WORKSTATION AND RACK MOUNT UNITSWORKSTATION AND RACK MOUNT UNITS

Volition ™

Fast Ethernet Media Converter

3 Innovation

The VOL-M100FX media converter is designed to connect existing legacy 100 Base-TX equipmentto fiber optic systems. The VOL-M100FX is a small, compact unit that can be installed at anyworkstation operating at 100Mbps. Its small size allows it to be stored out of the way of the user.

The Rack Mount unit has 12 ports and is easily mounted in a standard 19-inch equipment cabinet. TheFast Ethernet media converter complies with IEEE 802.3u and is based on 1300nm (FX) technology.

Features Include:• Cost effective copper to fiber conversion using VF-45™ interface• Full and Half duplex transmission• Compact size, easy to install• All front access on rack mount unit• Complies with 802.3u• Plug and play

Important Notice

Before using this product, you must evaluate it and determine if it is suitablefor your intended application. You assume all risks and liability associatedwith such use.Warranty; Limited Remedy; Limited Liability.

This product will be free from defects in material and manufacture for aperiod of one year from the date of purchase. 3M MAKES NO OTHER

WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTYOF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If thisproduct is defective within the warranty period stated above, your exclusiveremedy shall be, at 3M’s option, to replace or repair the 3M product or refundthe purchase price of the 3M product. Except where prohibited by law, 3Mwill not be liable for any loss or damage arising from this 3M product,whether direct, indirect, special, incidental or consequential regardless of thelegal theory asserted.

Telecom Systems Division6801 River Place Blvd.Austin, TX 78726-9000800 695-0447 FAX 512 990-7962http://www.3M.com/volition

40% Pre-consumer waste paper 10% Post-consumer waste paper

Volition, VF-45 and the “dot wave” symbol are trademarks of 3M.

3

Litho in USA. © 3M IPC 2000 80-6111-6008-8

Copper

Standard: IEEE 802.3u

Connectors: RJ45

Impedance: 100 Ohm

Fiber Optic

Source: LED

Wavelength: 1300nm

Connector: VF-45™

Optical Budget: 11 dB min. (62.5/125 µm fiber), 6 dB min. (50/125 µm fiber)

Sensitivity: -31 dBm min.

Maximum Distance: 2 km on 62.5 µm fiber

2 km on 50 µm fiber

Note: fiber cable loss at 1300nm is 1.5dB/km.

Power Supply Output Requirements (Workstation Unit)

Output Voltage: 7.5 VDC

Output Current: 300mA max.

Polarity: Inner pin is positive

Size of Connector: ID = 2.1 mm, OD = 5.5 mm, Length of pin (min.) = 12 mm

Power Supply Requirements (Rack Mount Unit)

90 to 264 VAC, 50 to 60 Hz

Physical and Environmental Specifications (Workstation Unit VOL-M100FX)

Dimensions: (W) 22 mm x (H) 75 mm x (D) 50 mm

(W) 0.88 in. x (H) 3 in. x (D) 2 in.

Weight: 50 g (0.11 lbs.) per unit

Shipping Weight: 2.90 kg (6.38 lbs.), 6 per pack

Operating Temp: 0° C - 42° C (32° F - 104°F)

Physical and Environmental Specifications (Rack Mount Unit VOL-M100FX-12)

Dimensions: (W) 48.3 cm x (H) 2.9 cm x (D) 13.9 cm

(W) 19 in. x (H) 1.17 in. x (D) 5.49 in. (W = 17.3 in. w/o mounting ears)

Weight: 2.16 kg (4.75 lbs.) per unit

Shipping Weight: 2.7 kg (6 lbs.) per unit

Operating Temp: 0° C - 42° C (32° F - 104°F)

Agency Approvals

This media converter conforms to the following standards:

Safety: UL 1950, EN 60950, CSA 22.2 #950

Electromagnetic Emissions: FCC Part 15, Class A, EN 55022, Class A

Specifications

Ordering InformationModel Description

VOL-M100FX Fast Ethernet workstation unit

VOL-M100FX-12 Fast Ethernet rack mount unit, 12 ports

Note: For international versions, contact your local 3M subsidiary.

Microfiltro ADSL




Descripción

Los Microfiltros de 3M son dispositivos pasivos (filtros pasabajos), que tienen como función la de eliminar los ruidos producidos por las altas frecuencia en las que opera la Banda Ancha (ADSL) sobre las líneas telefónicas con acceso a Internet.En otras palabras, mediante el microfiltro de 3M se eliminan las interferencias ocasionadas por las señales de los módems ADSL, pasando sólo aquellas que corresponden a la banda vocal (300 a 4000 Hz) de telefonía básica.Su instalación es muy sencilla pues sólo basta con desconectar el teléfono e intercalar el microfiltro conectándolo en un extremo a la roseta de pared (RJ11 Socket) y en el otro volver a conectar el teléfono tal como lo muestra el diagrama.

Características Principales

Parámetro Condición de Medición Valor Típico

Impedancia 600 ohms

Pérdidas de Inserción en Banda Pasante

300 a 4000 Hz < 1 dB

Pérdidas de Inserción fuera de Banda (Aislación)

30 kHz 33 dB

40 kHz 38 dB

100 kHz 55 dB

500 kHz 89 dB

700 kHz 86 dB

1100 kHz 85 dB

Pérdidas de Retorno 300 a 4000 Hz > 12 dB

Resistencia en CC < 15 ohms

Resistencia de Aislación medida a 400 V > 1000 Mohms

Rango de Temperatura de Operación -10°C a +70°C

Humedad sin condensación 90%HR

Perdida de inserción en la banda ADSL

0,01 dB max. en toda la banda ADSL con un microfiltro instalado

0,22 dB max. a 30 Khz con tres microfiltros instalados

Características Técnicas

GarantíaLa única responsabilidad del vendedor o fabricante será la de reemplazar la cantidad de este producto que se pruebe ser defectuoso de fábrica. Ni el vendedor ni el fabricante serán responsables de cualquier lesión personal pérdida o daños ya sean directos o consecuentes que resulten del uso de este producto.Antes de usarlo, el usuario deberá determinar si el producto es apropiado para el uso pretendido y el usuario asume toda responsabilidad y riesgo en conexión con dicho uso.

3 Telecomunicaciones

Regletas de 10 pares de Corte y Conexión STG 2000 El modulo STG 2000 es la evolución de la conexión. Su utilización puede ser en cualquier red moderna y es completamente compatible con todo tipo de aplicaciones de voz y datos. Certifica Cat 5 y soporta un ancho de banda de 100 Mhz.

Aplicación en la red El modulo STG es ideal para instalaciones de alta densidad (hasta 2400 pares en un gabinete sobre un solo lado de conexión, 1600 pares en 2,6m verticales) Los módulos STG2000 son utilizados tanto en el repartidor central de los CARRIERS mas importantes del mundo como en las redes de cableado estructurado y alta transmisión de voz y datos de las mas grandes corporaciones.

Confiabilidad y funcionamiento

Capacidad múltiple con todas las clases de conductores entre los 0.4 a 0.8 mm.

Retención mejorada del alambre. Contactos bañados evitan la corrosión.

Resuelven cat.5 (100 Mhz) Hasta 2 alambres pueden ser alojados en el mismo slot

Modulo muy compacto, hasta 10 pares en 14mm de alto. Contacto especial para cable “stranded” a pedido.

Highlights • Compatible Categoría 5 (100 MHz) • Modular de alta densidad (14 mm alto) • Múltiple capacidad (0.4 to 0.8 mm diámetro de conductor) • Compatible con marcos QUANTE POUYET y LSA • Modulo especial con terminación de cables trasera

Consulte por la línea completa de bloques, perfiles y accesorios

3M Argentina S.A.C.I.F.I.A.

Olga Cossettini 1031 Ciudad de Buenos Aires [email protected] www.3M.com.ar

3-pole arrester protection magazine 10 pairs

STG SOR CH 3 pole surge arrester magazine

Insulation resistance Dimensions

- Between tip and ring: >10 GΩ Magazine alone Length 130 mm

- Between tip / rig and ground: > 10 GΩ Width 13,9 mm

Height 29,8 mm

Leading though resistance

- Between ground contacts and frame: < 40 m Ω Magazine with Length 130 mm

STG strip Width 13,9 mm

Arrestor specifications Height 71,5 mm

Benefits

• Front face protection facility

• Small space needed (similar to IDC STG strip alone).

• Modular protection for 10 pairs.

Features • The arrestors are 3 pole type, equipped with fail safe.

• In the standard case, the arrestors are available in 2 models :

250 V and 420 V.

• For specific application, some other models are possible.

SO

R C

H 1

0 E

NG

-Ind

ex 0

0

The protection magazine is used to protect the STG 2000 module

against the overvoltage.

- The magazine is black colored.

- All the plastic parts are made with auto-extinguished raw plastic

material.

- All the contacts are made with bronze raw material plated with bright

tin lead.

- The magazine is composed of:

.1 plastic body

.1 plastic insert

.20 bronze line contacts to connect each line electrodes of the

arrestor.

.10 bronze ground contacts, to connect each ground electrode of

the arrestor.

.2 bronze ground contacts to connect the magazine to the frame.

Specification

Characteristics

Reference 231039 231040 233211

DC spark over

voltage (100 v / s) 250 V ± 20% 350 V ± 20% 420 V ± 20%

DC spark over

voltage (1KV/micro s) < 600V < 800 V < 900V

Nominal impulse

discharge current

(wave 8/20)

10 KA

(total current)

10 KA

(total current)

10 KA

(total current)

Nominal alternative

discharge current (50

Hz)

10 A

(total current)

10 A

(total current)

10 A

(total current)

Insulation resistance 10 GΩ 10 GΩ 10 GΩ

10 pairs protection magazine STG-SOR CH 10 without GDT C233726B

Unit: 1 magazine. Weight: 0,036 kgs for 1 magazine

Packaging: 20 magazines

10 pairs protection magazine STG-SOR CH 10 without GDT C233752A



10 pairs protection magazine STG-SOR CH 10 with GDT 250V+FS C233740B



10 pairs protection magazine STG-SOR CH 10 with GDT 250V+FS C233758A



10 pairs protection magazine STG-SOR CH 10 with GDT 350V+FS C233741B



10 pairs protection magazine STG-SOR CH 10 with GDT 420V+FS C233759A



3 poles surge arrester 250V-L10 mm with FS C231039A

3 poles surge arrester 350V-L10 mm with FS C231040A

Set of 8 three poles surge arrester 420V-L10 mm with FS C231025A

Combined INSERTION / EXTRACTION tool for arresters

OUT-SOR OEP C222053A

3M is a trademark of 3M.

3M Telecommunications

Europe, Middle East & North Africa Tel: ++49 (0)2131 / 14-5999

c/o Quante AG Fax: ++49 (0)2131 / 14-5998

Carl-Schurz-StraBe 1 . 41453 Neuss . Germany Internet: www.3MTelecommunications.com

Ordering informations Ref.–No.

Rig

hts

reserv

ed

to

make t

echnic

al altera

tio

ns.

Dr.

Nr

DQ

07

5-

SO

R C

H 1

0 E

NG

/ 0

5.2

00

4 Ind

ex 0

0

Accessories

If any goods supplied or processed by or on behalf of 3M prove on inspection to be defective

in material or workmanship,3M will (at its option) replace the same or refund to the buyer the

price of the goods or services. Except as set out above, all warranties and conditions,

whether express or implied, statutory or otherwise are excluded to fullest extent permissible at

law. statutory or otherwise are excluded to fullest extent permissible at law.

Important Notice

3M does not accept responsibility or liability, direct or consequential, arising from reliance

upon any information provided and the user should determine the suitability of the products

for their intended use. Nothing in this statement will be deemed to exclude or restrict 3M’s

liability for death or personal injury arising from its negligence. All questions of liability relating

to 3M products are governed by the seller’s terms of sales subject where applicable to the

prevailing law.

3M BRCP High Density Terminal Block

The 3M BRCP High Density Terminal Block is the latest generation of

MDF terminal blocks developed by 3M, specifically designed for

xDSL deployment in the Central Office for DSLAMs interconnection

with the existing Main Distribution Frame (MDF) as well as for DSLAM

interconnection in remote street cabinets. The innovative product

design of the BRCP HD provides superior features enabling both the

DSLAM vendor – with its installation contractors – and the xDSL

service provider rapid installation and providing superior density,

matching the requirements of current mass xDSL lines deployment.

Optimizing the space at the MDF in the Central Office

Very compact by design, the BRCP HD requires much less space on

the horizontal side of the MDF frame, making it also very adapted to

confined spaces of remote applications such as shelters or technical

rooms in residential or corporate buildings.

Thanks to its high density this product is also very adapted for

Remote DSL deployment in street cabinets.

Designed for xDSL deployment

The 3M BRCP High Density Terminal Block is modular by design (16

pair modularity) available in various pair counts enabling perfect

match with 8 pair bundles of most DSLAM cable configurations in the

market.

The BRCP HD is a swiveling double side - front and rear - block pro-

viding a clear demarcation of two termination areas, one at the rear

for the DSLAM vendor installation team (direct termination of DSLAM

cables), the other at the front for the xDSL service provider team to

jumper its DSL subscribers.

3M™

BRCP High Density Terminal Blockfor DSLAM Interconnection

Features

• Rear and front facing direct IDC or Wire-Wrap contacts

• Separated termination areas for DSLAM round trip cables

(POTS and LINE, at the rear) and subscriber jumpers (at the front)

• Different terminal block pair counts available ranging from

144, 192 to 256 pairs

• High density of individual 16 pair modules

• Wire guide channels

• Label holders (block, individual modules, individual pairs or

group of pairs)

• Cable retention device

• Easy fixation upon metallic MDF frames

• No disconnection point available but testing capabilities

Benefits

• Direct IDC can reduce installation costs versus costly

connectorized blocks (with or without stub cables)

• Adapted to service providers using Wire Wrap connection

technique (no specific need for training)

• Reduces installation mistakes such as wrong contact assignment

• Provides a physical/ legal demarcation between two different

service teams

• Enables perfect match with 8 pair bundles of most DSLAM cable

configurations in the market

• Reduces installation costs in avoiding costly and time consuming

cable splits

• Saves over 50% MDF space in comparison with common terminal

blocks in the market

• Adapted for both MDF, Colocation DF and Cabines applications

• Ensures professional and efficient wiring management

• Ensures clear and efficient identification and marking

(pair and DSLAM card assignment…)

• Ensures signal integrity

• Can be adapted to in most standard MDF frames

3M™ BRCP HD TB, 192 pairs

Specifications

Application

Electrical performance

Attenuation in the range 3 to 30 MHz: < 0.1 dB

Return loss in the range 3 to 30 MHz: < -35 dB

Near End Cross Talk to 30 MHz: < 45 dB

Dimensions

Length: 144 pairs= 135mm

192 pairs= 180 mm

256 pairs= 240 mm

Width: 130 mm

Depth: 130 mm

Rig

hts

reserv

ed

to m

ake t

echnic

al altern

ations.

Dr.N

r. 0

7-4

04

-80

10

0/0

7.2

00

5-p

df

3M is a trademark of 3M

3M™ BRCP High Density Terminal Block BRCP-HD 256 I

256 pairs, IDC

3M™ BRCP High Density Terminal Block BRCP-HD 256 W

256 pairs, WW


192 pairs, IDC


192 pairs, WW


144 pairs, IDC


144 pairs, WW


2 Blocks configuration

Each block is dedicated to one type of signal

- POTS + DATA

- POTS

1 Block configuration

Each half of the block is dedicated to one type of signal

- POTS + DATA

Important Notice

All questions of liability relating to this product are governed by our Terms of Sale subject where

applicable to the prevailing law.


Europe, Middle East & North Africa

c/o Quante AG

Carl-Schurz-Straße 1 · 41453 Neuss · Germany

Tel.: ++49 (0)2131 / 14-5999

Fax: ++49 (0)2131 / 14-5998

Internet: www.3MTelecommunications.com

Latest generation Integrated Splitter Block 3M™ BRCP is matching

all type of DSLAM equipment deployment (DSLAM interconnection at

the CO, Line-sharing and unbundling, Remote DSLAM deployments

in the OSP as well as at the Customer Premises).

Product design integrates unique features to match TELCO’s expec-

tations for a mass xDSL lines deployment with the better Service

Level.

Increasing Quality of Service

Splitters are fully protected inside the product to avoid any unsafe

disconnection of the end-user. This is particularly important with the

emergence of higher added value services over DSL such as Triple

Play services

Optimizing the space in the Central Office

Very compact and modular by design, BRCP requires less space on

the MDF frame and is very adapted for Remote application in cabi-

nets or shelters. 64 ADSL ports can be served from a 180mm length

block

Improving OPEX :

Using Single port splitter plugs, BRCP reduces the number of

jumpering and maintenance operations (Service change, ADSL,

ADSL2+, a.SHDSL, VDSL, lifeline service in case of disconnection

from the Data service, Intrusive testing in all directions)

Adaptation to TELCO Engineering procedures

BRCP splitter block is convenient for Craftmen as a whole 8 pairs

bundle can be terminated on the same connection module. This is

also better matching existing Information Systems

Products does not require any particular investment in connectivity

tooling and training as both Wire wrap and 3M™ IDC connectivity

can be proposed

3M™ BRCPIntegrated Splitter Block

Features

Connectivity

• Separated termination field for DSLAM wires or jumpers

• Wires Terminations without removing splitters

• Front facing IDC or WW contacts

• Wire guide channels

Splitters or Modules

• Removable Single port splitter modules

• Bridging modules for g.SHDSL, Full unbundling and VoIP applica-

tions

• Different types of splitters

• Lifeline service : Voice circuit is maintained and Data service is dis-

connected while removing the splitter

Test functionalities

• Intrusive testing capabilities in all directions (DSLAM, LINE, POTS)

by insertion of the 3 ways Test Plug instead at the splitter position

• Parallel Test plug for front side non intrusive testing

(without removing the splitter)

Benefits

• Adapted in countries using Wire Wrap connection technique. No

specific need for training

• Adapted to all types of deployment

• No risk of mistake

• OPEX improvement by single line customer management

• Future-proof and support future xDSL services deployment

• Line qualification and monitoring without changing the wires

3M™ BRCP Integrated Splitter Block

Important Notice

3M does not accept reponsibility or liability, direct or consequential arising from reliance upon

any information provided and the user should determine the suitability of the products for their

intended use. Nothing in this statement will be deemed to exclude or restrict 3M´s liability for

death or personal injury arising from its negligence. All questions of liability relating to 3M prod-

ucts are governed by the seller´s terms of sale subject where applicable to the prevailing law.

If any goods supplied or processed by or on behalf of 3M prove on inspection to be defec-

tive in material or workmanship, 3M will (at its option) replace the same or refund to the Buyer

the price of the goods or services. Except as set out above, all warranties and conditions,

whether express or implied, statutory or otherwise are excluded to the fullest extent permissi-

ble at law.

DSLAM Interconnection

3M™ BRCP Integrated Splitter Block, 48 ports, IDC, length 135mm BRCP-SP048IB



Unbundling Applications

3M™ BRCP Integrated Splitter Block, 64 ports, WW, length 180mm BRCP-SP064WB

3M™ BRCP Integrated Splitter Block, 80 ports, WW, length 225mm BRCP-SP080WB

Specifications


Dimensions

• Length (or height) according to application: see above

• Width 132mm

• Depth 132mm

Connectivity

IDC contacts form wires from 0.4 to 0.8mm WW contacts

T-connection facility with different gauges wires

Splitter Modules

Different types of Splitter modules are available

- ETSI TS 101 952-1-1 V1.1.1 option A and option B

Rig

hts

reserv

ed

to m

ake t

echnic

al altern

ations.

Dr.N

r. 0

7-4

04

-77

10

0/0

3.2

00

5-p

df




c/o Quante AG


Tel.: ++49 (0)2131 / 14-5999

Fax: ++49 (0)2131 / 14-5998


Mounting

• Vertical or Horizontal side of the MDF

• Standard fastening accessory for flat bar

• Mounting accessories according to local frame designs

Identification, Labeling

• 2 Label holders for 16 ports modules

• Additional Label holders are available for front marking and side

marking

Types of Deployment

• DSLAM Interconnection : 1 cable (DSLAM) + 2 jumpers

(LINE, POTS)

• UNBUNDLING 3 jumpers (DSLAM, LINE, POTS)

• Interconnection of an AMDF system

Installation and Labeling Deployment Configurations

Datasheet

The ID 3000 system allows conventional assembly of disconnection

blocks on to an existing frame.

The blocks can be mounted in either horizontal or vertical applications

without the need for further accessories.

The insulation displacement connection (IDC) system is the result of

innovative development of 3M`s world-class IDC contact technology.

ID 3000 can be utilised within multiple applications ranging from

medium- and large-sized communications distribution frames up to

main distribution frames for analogue and digital local exchanges.

The compact design approaches technical limits considerably increases

the component packing density while simultaneously reducing the weight

of the equipment.

To complete the ID 3000 system, 3M offers comprehensive over-voltage

protection, an economical and wear-resistant termination tool and a wide

range of accessories, such as test leads, disconnection plugs, etc

(see current catalogue).

Kit Contents:

- disconnection block with 10 pair disconnection modules and fastening

accessories

- cable cover

- module labeling strip

- set of covering strips

- label strip for label holder with transparent cover strip

- installation manual

ID 3000™ Disconnection blocks, based on 10 pair per module

Features

High packing density as a result of compact design

Allows switching of conductors with conductor diameters from 0.32 – 0.8 mm

Modular concept

•

•

•

Benefits

Touchprotected insulation displacement contacts

Wear-resistant, economical termination tool

Comprehensive accessories and overvoltage protection

Double contacts for T-connection

Installation on existing MDFs (horizontal/vertical)

•

•

•

•

•

100 pair horizontal / vertical

200 pair horizontal / vertical

ID 3000 disconnection block for horizontal or vertical mounting with 15-600-00000 backmount frame, 100 pair

Use: For mounting on existing distribution frames Mounting dimension: 148 mm Fastening distance: 90 mm (2 fasteners)

Weight: 1,35 kg

ID 3000 disconnection block for horizontal or vertical mounting with 15-700-01500 backmount frame, 200 pair

Use: For mounting on existing distribution frames Mounting dimension: 279 mm Fastening distance: 210 mm (2 fasteners)

Weight: 2,4 kg

Important Notice Buyer and/or user of this 3M product has to make sure before using this product that it is suitable for the intended use.

All questions of liability relating to this product are subject - in accordance with the prevailing law - to the Terms of Sale

of the selling 3M subsidiary. 3M is trademark of the 3M company. ID 3000 is a trademark of Quante AG.

Ordering information Ref. No.


Specification

Rights reserved to make technical alternations. Dr.Nr. 07-404-69700/04.2007

3M Telecommunications Europe, Middle East & Africac/o 3M Deutschland GmbHCarl-Schurz-Straße 1 41453 Neuss · GermanyTel.: ++49 (0)2131 / 14-5999Fax: ++49 (0)2131 / 14-5998 Internet: www.3MTelecommunications.com

General product features

Contact principle insulation displacement contact

Capacity 100/200 pair

Type of circuit disconnection

Housing material ABS self extinguishing UL94 V-0

Colour of plastic parts RAL 7035 light grey

Connection features

Conductor range (solid copper)

Wire diameter 0.32 – 0.8 mm

Overall insulation sheath diameter 1.1 mm max.

Number of reterminations (0.6 mm) > 200

Number of reterminations > 1000

(with disconnection plug)

Insertion tool ID 3000 standard tool

Axial retension force > 70%

Transversal retension force > 30%

T-connection facility yes

Contact material special brass

Contact surface counting silver 5 µm

Electrical features

Contactresistance <1mΩ

Leadingthroughresistance <10mΩ

Insulation resistance @ 500 V > 106MΩ(new,normalclimate

conditions)

> 104MΩ(withclimateimpact)

Coupling capacity < 2,5 pF

Impulse dielectric strength > 4.0 kV (IEC 60-1)

Impulse discharge current @ 8/20us 5 kA (IEC 60-1)

Dielectric strength @ 50 Hz 2 kV rms

Attenuation @ 20 MHz < 0.1 db

Cross talk attenuation

@ 1 MHz > 70 dB

@ 10 MHz > 55 dB

@ 20 MHz > 50 dB

@ 100 MHz > 37 dB

Transmission performance: Cat. 3

14

8

1

10

91

100

152129

1

10

191

200

27

9

152129

Quante™ ID 3000™

10 pair overvoltage protection magazine

with 3 pole surge arresters

10 pair overvoltage protection magazine with 3 pole surge arresters

Overvoltage or overcurrent in telecommunications systems is often

caused by natural atmospheric discharges, voltage induced on tele-

phone lines, static charging or direct contact with external voltage-

bearing lines. Telecommunications systems and the attendant per-

sonnel can only be protected against overvoltage and overcurrent by

reducing these factors to a non-hazardous level or by directing them.

For this purpose, 3M has developed a suitable protection concept

embodied by special magazines utilised for all ID 3000 disconnection

blocks. The ID 3000 protection magazines can be equipped with

various functional components depending on the type of protection

selected. The magazine is situated in the rear of the ID 3000 block.

Wire operation and testing is possible while magazine mounted.

This specific ID 3000 protection magazine is already fully equipped

with 3 pole gas discharge tubes with fail-safe to establish overvoltage

protection for each pair.

Features

• Ready to use 3-point protection for ID 3000 disconnection blocks

• Nominal spark-over voltage: 230 VDC

• Integrated fail-safe mechanism

• Rear-mounting solution

Benefits

• Reduced installation time due to pre-assembled solution

• Easily upgradeable to 5-point protection

• Maximum security in case of lasting surge due to integrated

fail-safe

• ID 3000 contacts remain fully accessible while magazine mounted

Quante™ ID 3000™ 10 pair overvoltage protection magazine

Important Notice

All questions of liability relating to this product are governed by our Terms of Sale subject where

applicable to the prevailing law.

3M is trademark of 3M. Quante and ID 3000 are trademarks of Quante AG.

Rig

hts

reserv

ed

to m

ake t

echnic

al altern

ations.

Dr.N

r. 0

7-4

04

-80

60

0/0

8.2

00

5-p

df



c/o Quante AG


Tel.: ++49 (0)2131 / 14-5999

Fax: ++49 (0)2131 / 14-5998


Specifications

Gas discharge tube (GDT)

DC spark-over voltage: 230V ±20%

Impulse spark-over voltage (1kV/ µs): < 650V … 850V

Impulse discharge current (8/20 µs)

Simultaneously both lines to ground: 5 kA

Line to ground: 5 kA

Alternating discharge current (50 Hz, 1s)

Simultaneously both lines to ground: 5 A

Line to ground: 5 A

Insulation resistance (100V): > 1 GΩCapacitance (1 MHz): < 1,5 pF

Materials

Housing: PPS glass fiber reinforced,

self-extinguishing according to UL 94 V-0

Contact material: Special brass alloy, silver plated

Dimension (L x W x H): 117,6 x 51,1 x 6 mm (without earth spring)

Temperature range: -40°C … +70°C

Quante™ ID 3000™ 10 pair overvoltage protection magazine 62126-504 25

with 3 pole arrester 230V, 5,0 kA with fail-safe

PU: 10 pcs


Codigo Bloque Precio Descuento Costo Costo Costo Modularidad Posibilidad Posibildad SoporteLista % PAR PAR PAR (líneas Corte Prueba Incluido

20 Protegido con por

Splitter regleta)

46197 BSTG 2000 Corte y prueba 111,23$ 88,98$ 0,89$ 4,60$ 10 SI SI SIprimario Block 100 pares

50315 BSTG 2000 Continuidad 103,95$ 83,16$ 0,83$ 4,54$ 10 NO SI SISecundario Block 100 pares

50317 ID 3000 Block 100 pares 273,00$ 218,40$ 2,18$ 5,21$ 10 SI SI SI

45912 BRCP Block 192 ps 252,79$ 202,23$ 1,05$ 8 NO SI SI

50659 BRCP Blcok 48 ps Splitter Int 480,00$ 6,00$ 10,00$ 8 NO SI SI

Accesorios

45719 Descargador Tripolar STG 2,84$ 2,27$

42261 Magazine 10 ps STG 2000 17,92$ 14,34$

50320 Magazine 10 ps ID 3000 con desc 37,80$ 30,24$

Spliter para BRCP

40194 Herramienta PKS 96,4 77,12

Miguel Fernandez

[email protected]

15 4069 8495

Cajas de 1 y 2 Pares

para Fachada MX

2000

MX2000

CDA – Caja de distribución 10 ps.Aplicación

Caja de distribución y empalme para tendido aéreo,

utilizada usualmente en la red secundaria.

Descripción

ü Diseño con trampa de agua grado IP54 según

Norma IRAM 2444

ü Tapa abatible en tres posiciones

ü Posee una cerradura de resbalón tipo para

accionar con destornillador.

ü Equipada con Módulos MX2000 con o sin

posibilidad de protección.

ü Dimensiones Externas: A 138 x L 418 x P 78 mm.

ü Construída en Policarbonato

autoextinguble con aditivo anti UV (Norma UNE

20324 grado 9)

Presentaciones:

ü Provista con cola de cable, permite ser

utilizada como caja Terminal de distribución

ü Provista sin cola de cable, su diseño permite acceder

con cables de hasta 30 pares, distribuir hasta 10 pares

y continuar con el resto sin necesidad de cortar y

empalmar todos los pares (sangría)

ü Apta para ser utilizada como Caja de Empalme y derivación

Equipadas con MX2000 ü Completamente estanco

ü Protección con gel contra humedad, polvo, agentes

agresivos, etc

ü Altamente confiable

ü Diseño a prueba de agentes externos

ü Posibilidad de protección

ü Sin herramientas especiales

ü Conecta todo tipo de cables de acometida

ü Control visual de una correcta conexión

ü Se puede instalar en rieles DIN 25 mm y DIN 35 mm

ü Más de 50 reconexiones en cada lado

ü Desconexión sin remover cable alguno

ü Posibilidad de pruebas en Serie y Paralelo

3M Argentina

Los Arboles 842 (1686) Hurlingham Prov. Bs. As.

Tel. 4469-8200 Fax: 4469-8261

E-Mail: [email protected] http: www.mmm.com/telecom

MX2000 – Módulo de Conexión

Generalidades

Completamente estanco Protección con gel contra humedad, polvo, agentes

agresivos, etc Altamente confiable Diseño a prueba de agentes externos

Posibilidad de protección Fácil Aplicación

Sin herramientas especiales Conecta todo tipo de cables de acometida

Control visual de una correcta conexión Se puede instalar en rieles DIN 25 mm y DIN 35 mm Más de 50 reconexiones en cada lado

Desconexión sin remover cable alguno

Posibilidad de pruebas en Serie y Paralelo

3M Argentina

Los Arboles 842 (1686) Hurlingham Prov. Bs. As.

Tel. 4469-8200 Fax: 4469-8261

E-Mail: [email protected] http: www.mmm.com/telecom

Conexión del Cable de Bajada• Conexión IDC lograda con un destornillador plano común

• Desde 0,4 mm hasta 1,1mm sólido• Aislación hasta 5 mm

Conexión de Lado Línea• Sin necesidad de herramientas

• Reconexionable

• Conecta Cobre sólido de 0,4 a 0,8 mm• Aislación hasta diámetro 1,8 mm

Desconexión y Prueba• Tapa de Desconexión basculante

• Sin partes que se puedan perder

• Protección siempre presente del lado acometida

• Seguridad aún con circuito abierto• 4 contactos planos accesibles

para probar la línea

Protección contra Sobretensiones• Descargador Tripolar con “fail-safe”

3m telecomunicaciones - comunitelsa.com.arcomunitelsa.com.ar/micrositios_contents/36arc_cmd.pdf ·...

Documents