21531098 diseno simulacion y optimizacion de un circuito sag utilizando jksimmet[1]
TRANSCRIPT
-
7/29/2019 21531098 Diseno Simulacion y Optimizacion de Un Circuito SAG Utilizando JKsimmet[1]
1/16
DISEO, SIMULACIN Y
OPTIMIZACIN DE UN CIRCUITO DEMOLIENDA SAG UTILIZANDO EL
SIMULADOR JKSimMet
(2) Split Engineering Chile Ltda.
Calle General Salvo #331 oficina 201Providencia - Santiago, CHILEFono: (56)-(2)-5978200Fax : (56)-(2)-5978206http://www.spliteng.com
(1) Split Engineering LLC.
110 S. Church Avenue, Suite 8312 CP 85701Tucson Arizona, USAFono: (1)-(520)-3273773Fax : (1)-(520)-3267532http://www.spliteng.com
Tom BoBo1, Sebastin Urrejola2, Cristian Rodrguez2
-
7/29/2019 21531098 Diseno Simulacion y Optimizacion de Un Circuito SAG Utilizando JKsimmet[1]
2/16
Energy consumption Total energy consumption in Chile by mining industry
represent 34.1%
- 1% increase on a 100.000tpd of porphyry copper
increase revenue over US$2M
Optimize your process!
-
7/29/2019 21531098 Diseno Simulacion y Optimizacion de Un Circuito SAG Utilizando JKsimmet[1]
3/16
How we do it? Changes in technology or introduction of new
technologies Improvements in technology, its application and
operating practice.
This involve:
Increase throughput, and value production Improve downstream process performance Combination of these
-
7/29/2019 21531098 Diseno Simulacion y Optimizacion de Un Circuito SAG Utilizando JKsimmet[1]
4/16
Perform a plant-scale test work Difficult or even inconclusive results
Simulation as an optimization tool
OPTIMIZATION WAYS
y o exp ore eren scenar os qu c y anefficiently Answer the what if?questions
JKSimMet Simulation Software Package!
-
7/29/2019 21531098 Diseno Simulacion y Optimizacion de Un Circuito SAG Utilizando JKsimmet[1]
5/16
Characterize the feed material JKDWT
Estimate machine parameters
WHAT DO WE NEED?
AG/SAG mill model
Let the simulations begins!
-
7/29/2019 21531098 Diseno Simulacion y Optimizacion de Un Circuito SAG Utilizando JKsimmet[1]
6/16
JK DROP WEIGHT TEST
-
7/29/2019 21531098 Diseno Simulacion y Optimizacion de Un Circuito SAG Utilizando JKsimmet[1]
7/16
AG/SAG MILL ORE PARAMETERS
( )Ecsb10
e1At
=
-
7/29/2019 21531098 Diseno Simulacion y Optimizacion de Un Circuito SAG Utilizando JKsimmet[1]
8/16
AG/SAG MODEL IN JKSimMet
-
7/29/2019 21531098 Diseno Simulacion y Optimizacion de Un Circuito SAG Utilizando JKsimmet[1]
9/16
CALIBRATING THE MODELS
-
7/29/2019 21531098 Diseno Simulacion y Optimizacion de Un Circuito SAG Utilizando JKsimmet[1]
10/16
SIMULATE
After calibration, the model will match the actual mill moreclosely than the default model would. At this point, themodel can be used for simulation, i.e. To calculate theeffect of the model parameters on the throughput andproduct of the mill. For instance, the model can show theeffect of changes in the ball charge, the use of a pebble
The variable rate AG/SAG model in the JKSimMet packageallows simulation of the effect of the following variables:
Ore grindability Throughput Feed size distribution Mill geometry
Ball size Grate configuration Ball charge
Mill speed
-
7/29/2019 21531098 Diseno Simulacion y Optimizacion de Un Circuito SAG Utilizando JKsimmet[1]
11/16
SIMULATE
-
7/29/2019 21531098 Diseno Simulacion y Optimizacion de Un Circuito SAG Utilizando JKsimmet[1]
12/16
CASE OF STUDY
-
7/29/2019 21531098 Diseno Simulacion y Optimizacion de Un Circuito SAG Utilizando JKsimmet[1]
13/16
THROUGHPUT
-
7/29/2019 21531098 Diseno Simulacion y Optimizacion de Un Circuito SAG Utilizando JKsimmet[1]
14/16
SAG MILL POWER UTILIZATION
-
7/29/2019 21531098 Diseno Simulacion y Optimizacion de Un Circuito SAG Utilizando JKsimmet[1]
15/16
CONCLUSIONS
Modern computer technology has made it possible to supplypowerful modeling software to the plant engineer.
Combined with the ore characterization techniques asJKDWT to rovide a article breaka e function to measure
the grindability, the grinding circuit operator now has thetools to optimize each component of the grinding circuit
-
7/29/2019 21531098 Diseno Simulacion y Optimizacion de Un Circuito SAG Utilizando JKsimmet[1]
16/16
CONCLUSIONS
Using a range of models of circuit and concentrator
operation, we can in principle optimize operation of:
A comminution circuit with respect to product size,throu h ut or ener utilization.
A comminution circuit with respect to downstreamrecovery. A complete mine concentrator operation with respect
to particular productivity criteria.